RDD/SD/JAMTARA/01/2021-22

Amount

Brick work in C.M 1:5 mix including all labour charges etc complete

Rabbit Dustbin

bench with backrest Wooden/ Treated Bamboo/ Bamboo composite planks Fitted in cast iron frame. Painted/ Polished with protective laquer coat

Development of all detail design works of all park components including architectural, structural, 3d designs complete with detailed estimation for project

18' FIBER RESIN STATUE-METALLIC FINISH

Supplying of USHA 1200 mm sweep ceiling fan with 300/600 mm standard down rod and electrical connection as required etc.

Supplying and fitting tubelights 12 watt (SYSKA B22)

Supplying and fitting syska 12watt led bulb

Supplying and fitting Syska 5watt led bulb

Garden light with 3m high pole

Spike light-tree uplighter (7w led 360MM HIGH)

The spiral slide is made up of Fiber Reinforced Plastic (FRP) in 3 parts with holding having shell thickness of 3-4 mm. The slide is supported on a center support of 80 NB GI pipe. The landing supports of the slide are supported by 20 NB pipes. The slide ladder is made up of 40 NB GI pipe & ladder hand-railing is made up of 25 NB GI pipe. The triangular steps of the ladder are made up of 16 SWG GI sheets. The safety railing of the slide is made up of 15 NB & 20 NB GI pipes. The trader and riser of the ladder are designed in such a way it won’t entrap child’s foot while playing. All the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it.

The crescent slide is made up of Fiber Reinforced Plastic (FRP) having thickness of 3-4 mm with sufficient reinforcement given to acquire proper strength to the module. The platform is supported on vertical 80 NB powder coated GI pipes. The railing provided to the platform is made from LLDPE and it is supported by 20 NB GI pipe. The ladder is made up of 25 NB GI pipe and with triangular steps of 16 SWG. The ‘T’ support under the slide is made up of 80 NB GI pipe. The ladder of the slide is designed in such a way it won’t entrap child’s foot while playing.

The disc challenger consists of a frame made from two 80 NB powder coated GI pipes with base plate and top bar also of 80 NB GI pipe of required size. The pad is hanged with a 20 NB powder coated GI pipe on a specially designed nylon pipe clamp of 80 NB and 20 NB, with ‘S’ hooks. The conical pads are made in rotational molding. The pad is fitted onto MS circle of 4-5 mm thick with GI plating. The plate is grounded with a GI chain and 25 NB GI pipes attached to it.

The hopping pad gives children’s a good hopping experience. The hopping pad is made from rotational molded linear low density polyethylene (LLDPE). The same is fixed to MS plate With GI plating welded and with 40 NB powder coated GI pipes of different lengths.

As the name suggests, this product has a combination of three products such as swing, slide and seesaw. The complete frame of this product is fabricated from 20 NB and 25 NB powder coated GI pipes. The slide in the combination set is made up of Fiber reinforced plastic (FRP). The slide landing support is made in 20 NB pipe. The slides are given a smooth finish so that the child does not hurt itself while playing on it. The bucket swing is made up of LLDPE and is attached to a nylon rope. For the bucket swing a handle is given for gripping, which is made in rotational molding and out of LLDPE. The see-saw lever and stand is made up of 20 NB GI pipe. The see saw seat is made out of LLDPE. The bearing used is of heavy-duty bush type.

The frame of A to B climber consists of alphabet shape ‘A’ and ‘B’ which is made from 25 NB GI pipes. It has spacers of 20 NB GI pipes. It also consists of a ladder placed between ‘A’ and ‘B’ made from 20 and 25 NB GI pipes. The whole product is powder coated to avoid rusting of the pipes and for esthetic look. The net climber is made up of nylon rope of 18 mm diameter which is attached by specially designed nylon clamps. These ropes are provided with pipe frame fabricated from 25 NB powder coated GI pipe. The rope is attached to “U” hooks welded to the frame.

The Multi Seater See saw comprises four Rotational seats. The lever consists of 20 NB and 80 NB powder coated GI pipes. The bearing used in this product is heavy duty nylon bush type. The stand for see saw is made using 50 NB GI pipe.

Fountain Pool : 20 ft. Dia. Provided by the Department (As per our design) Cascade Nozzles: 24 nos., 1 inch size, 6 nos. 1 1⁄2 inch size. . 20 FEET DIA GROUP CASCADE FOUNTAIN Ball Joints: 24 nos., 1 inch size, 6 nos. 1 1⁄2 inch size.. Gate Valves: 24 nos., 1 inch size, 6 nos. 1 1⁄2 inch size.. Header: As per requirement. Ht. of Water: 05 - 10 ft. approx. Pump Power: 12.5 hp x 2 nos., 3 phase sub. F. pump (PRIMA) make No. of Lights: 24 no. (12V/12W, LED, sub. fountain lights in 5-6 Colours) SMPS for Lights: 1 No. RGB Controller: 1 No. Light Stand: Made by Cast Iron and GI Fittings – 24nos. Cable: Double insulated 3 core PVC copper conductors for pump and 2/4 core round cables for lights. Filter for Pump: 2 nos. Electrical Materials: Supply of Electrical wires etc. for complete fountain system only. (For Inside the pool only, all wires used are from a Reputed Company) Electrical Panel: Supply of complete electrical control panel system Consists of main switch (MCB), starter with over load relays for pumps, etc. - 1 no. (All electrical equipments will be from a reputed company like L&T, Crompton Greaves, Havels, etc.) Electrical Work: Inside the pool for complete fountain system only. Plumbing Work: Inside the pool for complete fountain system only. Guarantee: One year from the date of completion.

Add GST 12%

Add 1% Labour Cess

Bidder Name

Amount

Madan Lal Bajaj Construction Pvt. Ltd.(GSTN-20AAFCM8541C1ZX)

BHUPESH KUMAR GUPTA(GSTN-20AKXPG2885L1ZN)

Madan Lal Bajaj Construction Pvt. Ltd.

Madan Lal Bajaj Construction Pvt. Ltd.