REPAIR TO STEEL FURNITURE OFFRS, MAP FURNITURE ETC AT BANAR IN ARMY AREA JODHPUR

Amount

Almirah steel Med and Small (FD-243, 110 & 1032)

Material & Labour for SHELF made out of 1.0mm thick Mild Steel Sheet of ALMIRAH STEEL MED and made to shape and size as shown on Drawing, necessary preperation of surfaces, applying two coats of Synthetic enamel paint matching with existing (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed.

Material & Labour for DOOR made out of 1.0mm thick Mild Steel Sheet of ALMIRAH STEEL MED and made to shape and size as shown on Drawing, necessary preperation of surfaces, applying two coats of Synthetic enamel paint matching with existing (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Door, complete all as specified and as directed.

Material & Labour for LOCKING DEVICE complete with MS rod and cover of ALMIRAH STEEL MED and made to shape and size as shown on Drawing including taking out unserviceable Locking Device, complete all as specified and as directed.

Material & Labour for Brass LOCK (MAKE : GODREJ) of ALMIRAH STEEL MED and fixing to Almirah as shown on Drawing including taking out unserviceable Lock, complete all as specified and as directed.

Material & Labour for chromium plated Mild Steel HANDLE (as approved) of ALMIRAH STEEL MED and fixing to Almirah as shown on Drawing including taking out unserviceable Handle, complete all as specified and as directed.

Material & Labour Mild Steel HINGE (as approved) 75mm in size suitable for ALMIRAH STEEL MED and fixing to Almirah as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Hinge, complete all as specified and as directed.

Material & Labour preperation of old surfaces of ALMIRAH MED STEEL (Drawing No. FD-243 & FD-1032) by Sand Paper/Scrapper and applying two Coats of , Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete on innder side and outer side all as specified and as directed. Outer side of front doors of Almirah Shall be painted in blue/brown colour and remaining portion shall be painted in Light Grey/Off White colour. (Outer area shall be painted two coats and inner one coat only)

Almirah Large steel, 1/2H 1/2S (FD-351,1031 & 1033)

Material & Labour for SHELF made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint matching with existing (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed.

Material & Labour for DOOR made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint matching with existing (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Door, complete all as specified and as directed.

Material & Labour for LOCKING DEVICE complete with MS rod and cover of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing including taking out unserviceable Locking Device, complete all as specified and as directed.

Material & Labour for Brass LOCK (MAKE : GODREJ) of ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing including taking out unserviceable Lock, complete all as specified and as directed.

Material & Labour for Chromium plated Mild Steel HANDLE (as approved) of ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing including taking out unserviceable Handle, complete all as specified and as directed.

Material & Labour for Mild Steel HINGE (as approved) 75mm in size suitable for ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing including taking out unserviceable Hinge, complete all as specified and as directed.

Material & Labour preperation of old surfaces of ALMIRAH LARGE STEEL (Drawing No. FD-1031 &1033) by Sand Paper/Scrapper and applying two Coats of Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete on inner and outer surface all as specified and as directed. Outer side of front doors of Almirah Shall be painted in blue/brown colour and remaining portion shall be painted in Light Grey/Off White colour. (Outer area shall be painted two coats and inner one coat only)

Chair Verandah FD/E6/MAP/11 (FD-256 & 359)

Material & Labour welding (full round of pipe as a one spot) of broken part of CHAIR VERANDAH as shown on Drawing, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of (White Colour) Synthetic enamel paint matching with existing (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed.

Material & Labour Mild Steel Round Bar 12mm dia to cover the distance between RT & LT Leg alongwith the Seat Front Side and Rear Side of CHAIR VERANDAH as shown on Drawing and welded, necessary preperation of surfaces, applying two coats of (White Colour) Synthetic enamel paint matching with existing (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Bar, complete all as specified and as directed.

S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR VERANDAH as shown on Drawing including taking out unserviceable Shoe, complete all as specified and as directed.

Material & Labour Re-canning of CHAIR VERANDAH in mat pattern with 4.0mm wide Half Round Oval Shape Plastic Caneof 21 strips on seat & back (as approved) to Frame as shown on Drawing including taking out old/worn out Canning, complete all as specified and as directed.

Material & Labour removing/scrapping complete old worn out Paint from Steel Frame of CHAIR VERANDAH as per Drawing by Sand Paper/Scrapper and applying One Coat of White Colour Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Chair CB A Steel With Arms (FD-75(M))

Material & Labour for SEAT FRAME made out of seasoned Second Class Hardwood of CHAIR CBA STEEL WITH ARMS, fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Synthetic Enamell Paint (as approved) on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing including taking out unserviceable Seat Frame, complete all as specified and as directed.

Material & Labour for BACK FRAME made out of seasoned Second Class Hardwood of CHAIR CBA STEEL WITH ARMS, fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Synthetic Enamell Paint (as approved) on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing including taking out unserviceable Back Frame, complete all as specified and as directed.

Material & Labour for ARMS REST made out of seasoned Second Class Hardwood of CHAIR CBA STEEL WITH ARMS, fixed with size approved by Engr-in-Charge Screws and Painting with Synthetic Enamell Paint (as approved) on Back Frame as shown on Drawing including taking out unserviceable Arms Rest, complete all as specified and as directed.

Material & Labour Mild Steel Flat Iron 25x3.0mm as RUNNER of length 350mm (approx), making hole for fixing End and Other End welded to CHAIR CBA STEEL WITH ARMS size 35x25x3 mm, applying two coat of Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer on Steel Surfaces as shown on Drawing including taking out unserviceable Runner, complete all as specified and as directed.

S&F PVC CAP at the top of Back Steel Pipe of CHAIR CBA STEEL WITH ARMS as shown on Drawing including taking out unserviceable Cap, complete all as specified and as directed.

S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR CBA STEEL WITH ARMS as shown on Drawing including taking out unserviceable Shoe, complete all as specified and as directed.

Material & Labour removing/scrapping old worn out Paint from exposed Steel Frame of CHAIR CBA STEEL WITH ARMS Drawing by Sand Paper/ Scrapper and applying one coat of Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Chair CB Steel without Arms (FD-75(M))

Material & Labour for SEAT FRAME made out of seasoned Second Class Hardwood of CHAIR CB STEEL W/O ARMS, fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Synthetic Enamell Paint (as approved) on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing including taking out unserviceable Seat Frame, complete all as specified and as directed.

Material & Labour for BACK FRAME made out of Second Class Hardwood of CHAIR CBA STEEL W/O ARMS, fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Synthetic Enamell Paint (as approved) on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing including taking out unserviceable Back Frame, complete all as specified and as directed.

Material & Labour Mild Steel Flat Iron 25x3.0mm as RUNNER of length 350mm (approx), making hole for fixing End and Other End welded to CHAIR CBA STEEL W/O ARMS size 35x25x3 mm, applying two coats of Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer on Steel Surfaces as shown on Drawing including taking out unserviceable Runner, complete all as specified and as directed.

S&F PVC CAP at the top of Back Steel Pipe of CHAIR CBA STEEL W/O ARMS as shown on Drawing including taking out unserviceable Cap, complete all as specified and as directed.

S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR CBA STEEL W/O ARMS as shown on Drawing including taking out unserviceable Shoe, complete all as specified and as directed.

Material & Labour removing/scrapping old worn out Paint from exposed Steel Frame of CHAIR CBA STEEL WITH ARMS Drawing by Sand Paper/Scrapper and applying One Coat of Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Chair Computer, Chair visitors and Chair Revolving Various types (TP)

Material & Labour for TAPESTRY/FABRIC CLOTH over SYNTHETIC FOAM 25mm thick (as approved) for SEAT/BACK of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out old worn out Tapestry/ Fabric Cloth and Foam from Chairs, complete all as specified and as directed.

Material & Labour CASTOR WHEEL (as approved) suitable and match with existing castor wheels of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable or broken Castor Wheel from Chairs, complete all as specified and as directed.

Material & Labour BOTTOM BASE (as approved) of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable Bottom Base from Chairs, complete all as specified and as directed.

Material & Labour GAS LIFTING HYDROULIC SYSTEM of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable Gas Lifting Hydroulic System from Chairs, complete all as specified and as directed.

Material & Labour HANDLE of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable Handle from Chairs, complete all as specified and as directed.

Table Office Officer steel (FD-1003)

Material & Labour for TOP of TABLE OFFICE OFFICER STEEL of Prelaminated post forming MDF Board 18/19 mm thick duly round edges, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ ARCHID), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing including taking out unserviceable Top, complete all as specified and as directed.

Material & Labour for DRAWER made out of 1.6mm thick Mild Steel Sheet and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Drawer, complete all as specified and as directed.

Material & Labour for CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Central Stiffener, complete all as specified and as directed.

Material & Labour for SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Side Stiffener, complete all as specified and as directed.

Material & Labour Brass LOCK (MAKE : GODREJ) of TABLE OFFICE OFFICER STEEL and fixing as shown on Drawing including taking out unserviceable Lock, complete all as specified and as directed.

Material & Labour Mild Steel HANDLE of TABLE OFFICE OFFICER STEEL and fixing as shown on Drawing including taking out unserviceable Handle, complete all as specified and as directed.

Material & Labour for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE OFFICE OFFICER STEEL as shown on Drawing necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

Material & Labour removing/scrapping old worn out Paint from TABLE OFFICE OFFICER STEEL by Sand Paper/Scrapper and applying one Coat of , Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Table office clk steel (FD-1004)

Material & Labour for TOP of TABLE OFFICE CLERK STEEL of Prelaminated post forming MDF Board 18/19 mm thick duly rounded edges,exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading as shown on Drawing including taking out unserviceable Top, complete all as specified and as directed.

Material & Labour for DRAWER made out of 1.6mm thick Mild Steel Sheet and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Drawer, complete all as specified and as directed.

Material & Labour for CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Central Stiffener, complete all as specified and as directed.

Material & Labour for SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Side Stiffener, complete all as specified and as directed.

Material & Labour Brass LOCK (MAKE : GODREJ) of TABLE OFFICE CLERK STEEL and fixing as shown on Drawing including taking out unserviceable Lock, complete all as specified and as directed.

Material & Labour Mild Steel HANDLE of TABLE OFFICE CLERK STEEL and fixing as shown on Drawing including taking out unserviceable Handle, complete all as specified and as directed.

Material & Labour for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE OFFICE CLERK STEEL as shown on Drawing necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

Material & Labour removing/scrapping old worn out Paint from TABLE OFFICE CLERK STEEL by Sand Paper/ Scrapper and applying one Coat of , Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Table 3'x2' with out Drawer (FD-1007)

Material & Labour for TOP of TABLE 3'X2' WITH OUT DRAWER of Prelaminated post forming MDF Board 18/19 mm thick duly rounded edges,, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing including taking out unserviceable Top, complete all as specified and as directed.

Material & Labour for CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH OUT DRAWER as shown on Drawing necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unservice-able Central Stiffener, complete all as specified and as directed.

Material & Labour for SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH OUT DRAWER as shown on Drawing No. FD-1007, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Side Stiffener, complete all as specified and as directed.

Material & Labour for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE 3'X2' WITH OUT DRAWER as shown on Drawing No. FD-1007 complete all as specified and as directed.

Material & Labour removing/scrapping old worn out Paint from TABLE 3'X2' WITH OUT DRAWER as shown on drawing by Sand Paper/ Scrapper and applying one Coat of , Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Table 3'x2' with Drawer (FD-1008)

Material & Labour for TOP of TABLE 3'X2' WITH DRAWER of Prelaminated post forming MDF Board 18/19 mm thick duly rounded edges, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHID), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading as shown on Drawing including taking out unserviceable Top, complete all as specified and as directed.

Material & Labour for DRAWER made out of 1.6mm thick Mild Steel Sheet and fixing to TABLE 3'X2' WITH DRAWER as shown on Drawing applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Drawer, complete all as specified and as directed.

Material & Labour for CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH DRAWER as shown on Drawing applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unservice-able Central Stiffener, complete all as specified and as directed.

Material & Labour for SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH DRAWER as shown on Drawing applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Side Stiffener, complete all as specified and as directed.

Material & Labour Brass LOCK (MAKE : GODREJ) of TABLE 3'X2' WITH DRAWER and fixing as shown on Drawing including taking out unserviceable Lock, complete all as specified and as directed.

Material & Labour Mild Steel HANDLE of TABLE 3'X2' WITH DRAWER and fixing as shown on Drawing including taking out unserviceable Handle, complete all as specified and as directed.

Material & Labour for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE 3'X2' WITH DRAWER as shown on Drawing complete all as specified and as directed.

Material & Labour removing/scrapping old worn out Paint from TABLE 3'X2' WITH DRAWER as per Drawing by Sand Paper/ Scrapper and applying one Coat of , Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Charpoy MS Tubing with plywood top (FD/MAP-II/01)

Material & Labour for Plywood TOP 12mm thick BWR grade confirming to IS-303, ISI marked and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP as shown on Drawing including taking out unserviceable Plywood Top, complete all as specified and as directed.

Material & Labour Complete removing/scrapping old worn out Paint on Steel Surfaces of CHARPOY MS TUBING WITH PLYWOOD TOP as per Drawing by Sand Paper/Scrapper and applying One Coat of Synthetic Enamell Paint (as approved) by Spray Painting Machine complete all as specified and as directed.

Charpoy GI Pipe with Nylon Newar (FD-220)

Removing of unserviceable Ply Wood/MDF from Charpoy GI Pipe tightening of loose components of (i.e.complete charpoy ).S&F Plywood 12MM Thick BWR Grade confirming to IS-303 of required size (out of 7’x3’). all as specified and as directed by Engr-in-Charge.

Removing of U/S MS Flat Iron Stiffner of GI Charpoy Plytop. S&F new flat MS Stiffner of size 900 x 50 x 5mm and fixed with Nut & Bolt of size 75 x 6MM as directed by Engr In Charge.

M&L Complete Removing/taking down existing nylon newar from G.I. pipe charpoys and tightening before weaving with and including approved new white or light colour nylon newar (not made out of recycled nylon) 50 mm wide weight 140grams per 10 runnning metere, closely knitted on both sides and end of newar stiched around, weight of newar in each charpoy not less than 1.50. kg complete all as directed

Locker Bed Side Steel (FD-257, 1029 & Built In)

Material & Labour for SHELF made out of 1.0mm thick Mild Steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing applying two coats of Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed.

Material & Labour for DOOR made out of 1.0mm thick Mild Steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing applying two coats of Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Door, complete all as specified and as directed.

Material & Labour LEG made out of 1.0mm thick Mild Steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-257 & FD-1029, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Leg, complete all as specified and as directed.

Material & Labour aluminum HASP & STAPPLE of size 100mm for LOCKER BED SIDE STEEL and fixed as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Hasp & Stapple, complete all as specified and as directed.

Material & Labour Chromium plated Mild Steel HANDLE (as approved) of LOCKER BED SIDE STEEL and fixing to Almirah as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Handle, complete all as specified and as directed.

Material & Labour Mild Steel HINGE (as approved) 50mm in size suitable for LOCKER BED SIDE STEEL and fixing to Almirah as shown on Drawing including taking out unserviceable Hinge, complete all as specified and as directed.

Material & Labour Complete removing/scrapping old worn out Paint from LOCKER BED SIDE STEEL by Sand Paper/Scrapper and applying two Coat of , Synthetic Enamell Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed. Outer side of front doors of Locker Shall be painted in blue/brown colour and remaining portion shall be painted in Light Grey/Off White colour.

Table 900x 900x760 mm steel (FD-1009)

Material & Labour for TOP of TABLE 3'X3' WITH OUT DRAWER of Prelaminated post forming MDF Board 18/19 mm thick duly round edges, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHID), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing including taking out unserviceable Top, complete all as specified and as directed.

Material & Labour for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE 3'X3' WITH OUT DRAWER as shown on Drawing No. FD-1009, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

Material & Labour removing/scrapping old worn out Paint from TABLE 3'X3' WITH OUT DRAWER as per Drawing by Sand Paper/ Scrapper and applying Two Coats of , Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Material & Labour welding (full round on pipe as a one spot) of broken part of TABLE 3'X3' STEEL as shown on Drawing rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

Bed Hard steel (FD/E6/MAP/08R)

Material & Labour for HEAD SIDE BOARD of BED HARD MS TUBING of Prelaminated Particle Board 18/19mm thick, exterior grade, ISI marked and fixing as shown on Drawing including taking out unserviceable Head Side Board, complete all as specified and as directed.

Material & Labour for FOOT REST BOARD of BED HARD MS TUBING of Prelaminated Particle Board 18/19mm thick, exterior grade, ISI marked and fixing as shown on Drawing including taking out unserviceable Foot Rest Board, complete all as specified and as directed.

Material & Labour for Plywood TOP 12mm thick BWR grade confirming to IS-303, ISI marked and fixing to BED HARD MS TUBING as shown on Drawing including taking out unserviceable Plywood Top, complete all as specified and as directed.

Material & Labour for MIDDLE STIFFENER made out from Mild Steel Square Tube/Pipe 25x25mm of 1.6mm wall thickness, adjusting existing 2 No. Stiffeners and fixing to BED HARD MS TUBING and fixing as shown on Drawing applying two coats of Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer, complete all as specified and as directed.

Material & Labour Mild Steel CLIT of size 25x25x6mm with single hole on Short Rails for Support of Plywood Top and fixing to BED HARD MS TUBING and fixing as shown on Drawing applying two coats of Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer, complete all as specified and as directed.

Material & Labour Complete removing/scrapping old worn out Paint on Steel Surfaces of BED HARD MS TUBING by Sand Paper/Scrapper and applying One Coat of Synthetic Enamell Paint (as approved) by Spray Painting Machine complete all as specified and as directed.

Form with Back (FD-78)

Material & Labour SEAT of FORM WITH BACK made of single plank of teak wood of size 1800x255x25mm as shown on Drawing including taking out unserviceable seat, complete all as specified and as directed.

Material & Labour BACK of FORM WITH BACK made of single plank of teak wood of size 1800x150x19mm as shown on Drawing including taking out unserviceable seat, complete all as specified and as directed.

Material & Labour for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm x1.6 mm thick(as required) for FORM WITH BACK as shown on Drawing complete all as specified and as directed.

Material & Labour removing/scrapping old worn out Paint from FORM WITH BACK by Sand Paper/ Scrapper and applying Two Coats of , Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Material & Labour welding (full round on pipe as a one spot) of broken part of FORM WITH BACK as shown on Drawing No. FD-78, rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

Teapoy Varandha (Fd/E6/MAP/18, FD 383 & FD-255)

Material & Labour for TOP of TEAPOY VARANDHA of Prelaminated postforming MDF Board 18/19 mm thick, exterior grade ISI marked duly round edges(MAKE : GREEN PLY/CENTURY/ARCHID), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing including taking out unserviceable Top, complete all as specified and as directed.

Material & Labour for Welding of Broken Leg with Mild Steel Square Pipe of size 18mm x 1.6 mm thick / 20 mm round pipe 1.6 mm thick (as required) for TEAPOY VARANDHA as shown on Drawing, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

Material & Labour removing/scrapping old worn out Paint from TEAPOY VARANDHA by Sand Paper/ Scrapper and applying one Coat of Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Material & Labour welding (full round on pipe as a one spot) of broken part of TEAPOY as shown on rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

Chair School with Hand Board (FD/E6/MAP/05)

Material & Labour Moulded PVC/wooden seat and back of CHAIR SCHOOL WITH HAND BOARD as shown on Drawing including taking out unserviceable seat back, complete all as specified and as directed.

Material & Labour for Welding of Broken Leg with Mild Steel Round Pipe of size 20mm x 1.6 mm thick (as required) for CHAIR SCHOOL WITH HAND BOARD as shown on Drawing necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

Material & Labour for hand board for CHAIR SCHOOL WITH HAND BOARD repalce with Prelaminated POST FORMING MDF board, Make - Greenply/Century/Archidply as shown on Drawing all as specified and as directed.

Material & Labour removing/scrapping old worn out Paint from CHAIR SCHOOL WITH HAND BOARD as per Drawing by Sand Paper/ Scrapper and applying one Coat of , Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Material & Labour welding (full round on pipe as a one spot) of broken part of CHAIR SCHOOL WITH HAND BOARD as shown on Drawing rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

S&F HARD RUBBER/PVC SHOE superior quality (as approved) fixing to Leg of CHAIR SCHOOL WITH HAND BOARD as shown on Drawing including taking out unserviceable Shoe, complete all as specified and as directed.

Rack shoe steel (FD/E6/MAP/02 (R) )

Material & Labour removing/scrapping old worn out Paint from Rack shoe steel Drawing by sand paper/Scrapper and applying Two Coats of Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

S&F HARD RUBBER/PVC SHOE superior quality (as approved) fixing to Leg of Rack Shoe steel as shown on Drawing including taking out unserviceable Shoe, complete all as specified and as directed.

Computer Table various size (TP,FD/E6/MAP/03)

Material & Labour for replacement of old/broken table top of COMPUTER TABLE with new table top made out of prelaminated post forming MDF Board 18/19 mm thick duly rounded edges, exterior grade ISI marked (Make : GREENPLY/CENTUARY/ARCHID) all as shown in drg and as per the direction of Engr -in-Charge

Material & Labour for replacement of broken key board tray of COMPUTER TABLE with new key board tray made out of 18mm thick prelaminated exterior grade MDF Board (Make : GREENPLY/CENTUARY/ARCHID) all as shown in drg and as per the direction of Engr -in-Charge

Material & Labour for replacement of telescopic piano type hinges of broken key board tray of COMPUTER TABLE with new telescopic piano type hinges all as shown in drg and as per the direction of Engr -in-Charge

Table 2100x900x760 mm (FD-1013)

Material & Labour removing/scrapping old worn out Paint from Table 2100x900x760 mm as per Drawing by sand paper/Scrapper and applying Two Coats of Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

Material & Labour removing old top from Table 2100x900x760 mm and replace with new top of prelaminated post forming MDF board 18 mm, Make- Greenply/Century/Archidply as per Drawing complete all as specified and as directed.

Table bedside (FD/E6/MAP/15R)

Material & Labour removing old top from Table bedside and replace with new top of 18/19 mm thick exterior grade prelaminated partical board , Make- Greenply/Century/Archidply as per Drawing complete all as specified and as directed.

Material & Labour removing old drawer with knob from Table bedside and replace with new drawer with knob of 18/19 mm thick exterior grade prelaminated partical board with knob Make- Greenply/Century/Archidply as per Drawing complete all as specified and as directed.

Material & Labour removing old box from Table bedside and replace with new box of 18/19 mm thick exterior grade prelaminated partical board, Make- Greenply/Century/Archidply as per Drawing complete all as specified and as directed.

Material & Labour removing back from Table bedside and replace with new back of18/19 mm thick exterior grade prelaminated partical board, Make- Greenply/Century/Archidply as per Drawing complete all as specified and as directed.

Material & Labour removing/scrapping old worn out Paint from Table bedside Drawing by sand paper/Scrapper and applying Two Coats of Synthetic Enamell Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

DEEKSHA BUILDERS

SK INDUSTRIES

M/S CHANDER SHEKHAR

PRAFUL ENTERPRISES

Surendra Singh

Shri Maruti Trading Co.