Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹4.2 LAccepted-AOC | 1 | Accepted-AOC L1 | |
| 2 | 2₹4.4 L+₹17,536 (4.14%)Rejected-Finance | 2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | P. SHIHABUDHEEN L1 | MUHAMMED NOUFAL K P L2 |
|---|---|---|---|---|---|
| 1.00Building Improvement Work | |||||
| 1.00 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | 614.94 | sqm | 74.26 ₹45,665.52 Lowest | 80 ₹49,195.28 |
| 1.00 | 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 645.03 | sqm | 158.79 ₹1,02,423.68 Lowest | 160 ₹1,03,204.16 |
| 1.00 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 36.49 | sqm | 151.43 ₹5,526.29 Lowest | 200 ₹7,298.8 |
| 1.00 | 50.6.1.7:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete | 7.7 | cum | 6,512.6 ₹50,147.02 Lowest | 8,000 ₹61,600 |
| 1.00 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 63.25 | sqm | 339.63 ₹21,481.6 Lowest | 339.63 ₹21,481.6 Lowest |
| 1.01 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 250.4 | kg | 171.81 ₹43,021.22 Lowest | 171.81 ₹43,021.22 Lowest |
| 1.01 | OD231067/2025-2026:providing and fixing 150mm semi circular pvc 4kgf/cm2 rain water gutter pipe with iron bracket with 25X 5mm size flat, screws ad washers etc including making necessary connections | 10 | per metre | 400.48 ₹4,004.8 Lowest | 400.48 ₹4,004.8 Lowest |
| 1.01 | OD231068/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with
zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy
primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have
protective guard film of 25 microns minimum to avoid scratches during transportation and
should be supplied in single length up to 12 meter or as desired by Engineer-in-charge. The
sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal,
complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting to size and shape wherever required. | 30 | sqm | 572.91 ₹17,187.3 Lowest | 572.91 ₹17,187.3 Lowest |
| 1.01 | 50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood | 5.67 | sqm | 3,101.93 ₹17,587.94 Lowest | 3,101.93 ₹17,587.94 Lowest |
Tender Value
₹4.2 L
EMD Value
₹10,588
Closing Date
30 Aug 2025, 4:00 pmClosed
ASSISTANT ENGINEER
AE OFFICE
Annual Plan-337/25-26-Pokottil Anganwadi and Women Empowerment -completion
2025_LSGD_789796_2
02/AE/LID-EW/KZTR/2025-26
Open Tender
Civil Works - Buildings
Item Rate
POOKKOTTIL ANGANVADI
Please refer Tender documents.
10 documents required · 10 mandatory
₹935
Yes
₹10,588
Yes
22 Apr 2026
22 Aug 2025
1 Sept 2025
22 Aug 2025
30 Aug 2025
22 Aug 2025
Amount
Building Improvement Work
13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
50.6.1.7:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD231067/2025-2026:providing and fixing 150mm semi circular pvc 4kgf/cm2 rain water gutter pipe with iron bracket with 25X 5mm size flat, screws ad washers etc including making necessary connections
OD231068/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood
50.9.4.1:Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood
OD231111/2025-2026:Supplying and providing PVC door with frame 50X 40X 2mm and shutter with shutter frame 60mm wide and 25mm thick pvc hollow panels including all charges
18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.
17.7.4:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
OD231520/2025-2026:Providing and laying interlocking cabbles 60 mm thick (premium )min strength 4kg/cm2 over a bed of 6mm metal in 50mm average thick and compacting using earth hammer/ compacting machine hand operated including cost,conveyance and labour charges.
OD231155/2025-2026:Providing and fixing Granite of any colour and shade for Name board, of required size laid over base of cement mortar 1:4 ( 1 cement : 4 coarse sand), including all charges etc. complete at all, levels, including lettering & fixing
MUHAMMED NOUFAL K P (BID ID -2317510)
Bidder Name
MUHAMMED NOUFAL K P
P. SHIHABUDHEEN
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1301347.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.39 MB
viewnit.pdf
Tender Documents • 0.03 MB
BOQ_1301347.xls
BOQ • 0.31 MB
viewsbd.pdf
Tender Documents • 1.79 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .