Renovation of Sujlam Suflam Sub Division No.8 Office Building, Patan.

BILL OF QUANTITIES

Name Of Work: Renovation of Sujlam Suflam Sub Division No.8 Office

Building, Patan"

Percentage Rate Tender (Up to INR 50 Cr. )

It Description of Item (with brief Quantity Rate Amount

e specification and reference tobook Unit In

m of specifications) figure

1 Demolition of Brick work and stone

masonry including stacking of

serviceable materilas and disposal of 0.58 Cum. 562.84

unserviceable materials with all lead

and lift.(ii) In Cement Mortar.

2 Removing lime or cement plaster

including racking out joints 20 mm deep 50.52 Smt. 53.2

3 Excavation for foundation upto 1.50 m.

depth including sorting out and stacking

of useful materials and disposing off the

excavated stuff upto 50 m. lead (B) 38.94 Cum. 157.08

Dense or Hard soil

4 Providing and laying foundation

concrete of proportion as under by

using cement, sand and machine

crushed course aggregate laid in situ

including necessary temping, smooth 5.83 Cum. 4004

finishing, watering and curing as

directed with all leads and lifts etc

complete.(A) (P.C.C.) 1:3:6

5 Providing and laying CC 1:2:4 grade

using cement, sand & crushed metalin

cuding providing & erecting necessary

formwork, centering, vibrating,

smoothfinishing, watering & curing as 18.41 Cum. 5624

directed with all leads & lifts

etc.complete.(sub-structure & super

6 Providing TMT Bar FE 500D

reinforcement for R.C.C. work including

bending, binding and placing in position 1609.25 Kg. 77.29

complete.Floor upto two level

7 Providing burnt brick masonary 2nd

class incement mortar in1:5 proportion

for foundation & superstructure upto

6.00 mt.height including striking out 62.51 Cum. 4182

joints 20 mm deep curing watering,

finishing joints and providing scaffolding

as directed as comp.

8 Providing 20 mm thick double coat mala

cement plaster on interior brick /

concrete work for plastering comprising

of base coat of 12 mm thick cement

plaster in cement mortar (1 Cement :

coarse sand) in rough finishing and 8 539.01 Sqm. 284.33

mm thick top coat of cement mortar 1:2

(1 Cement : 2 Coarse sand) finished

with trovel including scaffolding curing

9 Providing 15mm thick cement plaster in 89.74 Sqm. 145.99

single coat on Rough (Similar)side of

single or half brick walls for interior

plastering upto floor two level and

finished even and smooth in (iii)

Cement mortar 1:6 (1-cement:6-sand)

10 Providing 10mm thick cement plaster in 76.07 Sqm. 125.32

single coat on brick/concrete walls for

interior plastering upto floor two level

and finished even and smooth in (ii)

Cement mortar 1:4 (1-cement :4-sand)

11 Applying two coats of putty & two coats 1639.2 Sqm. 40.59

of primer of approved brand and

manufacture on new wall surface to give

an even shade including thoroughly

brushing the surface free from mortar

dropping and other foreign matter and

sand papered smooth.

12 Wall painting (two coats) with plastic 1639.2 Sqm. 82.97

emulsion paint of approved brand and

manufacture on undecorated wall

surface to give an even shade including

throughly brushing the surface free from

mortar droppings and other foreign

matter and sand papered smooth

13 Providing and laying Vitrified tiles 8 to 27.35 Sqm. 1120.36

10 mm thick , 24'' x 24'' in flooring treads

of steps and landing laid on abed of

12mm thick cement mortar 1:3 (1-

cement :3-coarse sand ) finishing with

flush pointing in white cement.

14 Providing and laying Vitrified tiles 8 to 2.51 Sqm. 1195.02

10 mm thick , 24'' x 24'' in skrting risers

of steps and dedo on 10mm thick

cement plaster 1:3 (1-cement : 3-coarse

sand) and jointed with white cement

15 Providing and laying water proofing

tretment with chaina mosaic tiles

flooring over avg 40 mm C.C. 1:2:4 {1

Cement : 2 sand : 4 Kapachi / Gritt 6 to

12 mm size} bedding for maintaining

slope for plain and curve surface &

mm to 20 mm of broken piece of

seramic / glazed tiles ( one for more

color as directed ) to be laid over

cement mortar bedding of C M 1:3 (1

cement : 3 sand ) containg one Kg of 27.8 Sqm. 1079.69

water profing materials per bag of O P

C at plain or / and slopes and to be

tempered to bring mortar ceramic up to

surface with using white cement and

colour pigment including rounding of

junctions and extending them up to

cm along the wall and curing with bends

any patterns or design as per drawing

and cleaning by using oxalic acid etc

16 Anti-Termite System:Providing and laying

of permanent piping technology anti-termite

treatment before flooring work by installing

LLDP (Low linear density polyethylene)

tube of 8 mm O.D. & 6.4 mm 1.D. with

inbuilt pressure compensation chip every

30 cm interval in the tube, having working

pressure of 2 Kg/cm2 and release rate of

1.9 Itr/hour fixed by P-clips and nails. The

LLDP pipe shall be installed at the entire

periphery of the building and at internal

network of building at a depth of 20 to

mm under floor at every 2 to 3 mtr. c/c 25.96 Sqm. 134.33

distance (adjusted as per building layout ) &

Ends of loop pass through a PVC elbow of

minimum 32 mm ID at junction box of wall

and floor level, entering into a steel

reinforced grooved flexible pipe of minimum

22 mm ID leading into junction box and the

loops shall terminate in junction boxes &

test every junction during injecting

chemicals for termite control treatment. The

anti termite chemical Imidacloprid 30.5%

SC mix as per IS-6313 (part III) shall be

injected by the pressure pump diluted with

water @ 10.5 ml/5 ltr of water at the rate of

2 Kg/sq.cm @ 5 Ltr/SMT. The contractor

shall submit approved line plan for piping

system and junction boxes dully approved

by Engineer-in-Charge with bond of 5 year

warranty.(II)Anti Termite chemical injected

area (Chemical injecting incl. labour cost)

17 Providing and fixing complete sliding

shutter solid PVC window 25mm thick

factory made glazed solid PVC window

shutter consisting of frame made out of

M.S. tube of 19 gauge of size 15 x

15mm for styles top, bottom rail. M.S.

frame shall have a coat of steel primer

of approved make and manufacture,

M.S. frame shall be covered with 4mm

size 58mm x 25mm x 38 mm out of

which 8mm shall be bent at 90 degree

towards inner side on front face of the

window shutter forming stiles. For top

rail and bottom rails, M>S. frame shall

be covered with 4mm thick, 58mm wide

PVC sheet out of which 8mm shall be

bent at 90 degree towards inner side on

front face and 38mm wide PVC sheet

shall cover the M.S. frame at top and 4.32 Sqm. 2602.62

bottom rail on back side of window

shutter, 4mm thick 15mm wide cross

PVC sheet as gap insert for top and

bottom rail. PVC sheet beading of 8mm

thick (4mm x 2) to be stuck internally

with solvent cement adhesive in top and

bottom rails. Glass panel will be fitted

externally in the clear space available

between stiles & rails and fixed between

PVC sheet of stiles and rails bent at

shape outer PVC beading nailed on

stiles and rails at the back side so that

removed when required for replacement

of broken glass etc. complete as per

direction of etc. complete as per

direction of Engineer in charge and

18 Providing and fixing M.S. grills of

required pattern to wooden frames of

windows etc.with M.S. flats at required

spacings and frame alround, square or 62.58 Kg. 106.29

round bars with round headed bolts and

nuts or by screws

(A) Plain Grill.

19 Provoding and fixing flush door shutters,

solid core construction with frame of first

class hardwood with cross board and face

veneer or plywood face panels, including

anodised alluminium butt hinges with 3.52 Sqm. 1829.74

necessary screws. (B) Non-decorative type

and block board core anodised alluminium

butt hinges in flush door shutters (2) 35 mm

20 Providing and fixing standared extruded

of alluminium section of size 63.50 x

with colour anodized alluminium frame

with 5 mm thick transparent bronze 0.41 Sqm. 1175.56

colour tinted float glass with colour

anodized alluminium frame for

ventilation with 5 mm thick frosted glass

as details etc complete for.window

21 Providing and fixing Polished granite

stone 20 to 25mm thick black having 7.74 Sqm. 3525.41

half round edge for frame of doors and

22 Providing And fixing single layer water

proof gypsum board 12.5 mm thick

sections using water proof board of size

suspended by GI suspender channel of

size 25 mm x 3 mm with intermediate

channel og size 18 mm x 40 mm x

mm at 1220 mm center to center ceiling

section of size 40 mm x 35 mm x

mm at 457 mm c/c and perimeter 72.71 Sqm. 606.95

channel A of size 20 mm x 27 mm x

mm x 0.5 mm at edges & drops

incl.paper tap sand sofit cleat, anchor

fastener, scoch bolt connecting

cleat,joining compound top coat on

ceiling incl.making necy.opening for

light fitting,diffuser etc. comp. as per

detail drawing as directed

23 Prepairing Polish Kota Stone Cupboard

for file storage in office having box size

of 450 mm height, 1500 mm length and

450mm projection from wall including all

necessary cost for grooving machine, 36.22 Sqm. 782.75

binding liquid/Glue for stone and filling

remaing groove with white cement ,etc.

complete as per requirement.

24 Providing & Fixing Wooden Working L

ShapeTable - Size Length 2100mm X

25 Providing & Fixing Wooden Drawer(6 4 Nos 18553.7

No.) Table size 1200mm X 600mm X

26 Providing and Fixing PVC SWR pipes

for Soil, Waste And Rain water Of 75 24 Rmt. 191.9

27 Providing and fixing wash basin with

single hole for pillar tap with C.I or M.S

brackets painted white including cutting

cutting holes and making goods the

same include. C.P. brass waste and 1 Nos 2339.16

waste pipes (A) Vitreous china. (II) Flat

back washbasin 550 mm x 400 mm size

(I) in colour with 15 mm dia pillar cock

28 Providing and fixing screw down bib

taps of following size.(B) Brass

chromium plated screws down Bib Tap. 5 Each 186.83

29 Providing and fixing Urinal or approved

quality including conecting the Urinal

with waste pipe , tap etc.complete. (A) 4 Each 1557.42

White earthenware flat back or corner

type size 430mm x 260mm x 350mm.

30 Providing laying and jointing in true line

and level 25mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings

as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or 70 Rmt 91.84

shall be concealed as directed including

necessary fittings etc. including testing

of pipe and joints and fixing the same

with adhesive solvent, including cost of

31 Providing & erecting Approved make

Ceiling Fan with double ball bearing ISI

mark with Condenser 230 volt A.C.50

Hz 1200 mm sweep complete having

blades aluminium body and blade sets 5 Each 2311.89

having ornamental design shanks

canopy erected with earthing. [ Make

shall be approved by Engineer in

32 Supplying and erecting 19 / 20 mm.

nominal bore Medium Class M.S. Pipe

down rod erected duly painted for fan 8 Rmt. 108.07

complete with proper insulation without

leakage and earthing.

33 Supplying & erecting Fan Hook of

mm M.S. Round bar grouted in RCC

slab with Making the site as original. 4 Each 43.43

34 Point wiring for Light / Fan/ Bell/ Primary

Point with 2-1.5 sq. mm & earthwire of

1.5 sq. mm (green) both are of ISI

marked 1.1 kv grade FRLS PVC

insulated multistrand copper wires, in

following type of pipe to be erected

concealed in /flushed on wall/ceiling

complete with 6A Tissino Type ISI

marked flush type switch / bell push and 20 point 354.51

accessories erected on Metal / PVC s

Box covered with 3 mm thick

PC(Polycarbonet) /Acrylic sheet. with

necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (a) with

medium class Rigid PVC pipe and

35 Supplying & erecting approved make

HFHC Electronic ballast having

operation voltage range 120V to 300V 30 Each 249.47

at 0.95 power factor for (a) One No.

20/40 watt tube light Cat.II

36 Providing and erecting ISI mark Medium

class RIGID PVC PIPES of following

size complete to be erected on/in wall or

ceiling erected with necessary PVC

fittings & Junction boxes fixed with

adhesive solution & Clamps with

following dia of pipes, in approved

manner as directed

37 Providing and erecting Miniature circuit

breaker single pole 6A to 25A suitable

to operate on 240 V A.C. system and

having breaking capacity 10 KA to be 13.00 Each 112.11

erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

38 providing and erecting Approved make

ELCBs / RCCBs conforming to IS:

12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of

10 KA and suitable for operation on

single phase 240 V,50Hz. having 1 Each 2235.13

characteristic of quick action & tripping

with all advance feature & do not

incorporate any electronic component.

for following Max. rating erected as

(ii) 40Amps. DP Cat. III

39 Providing and erecting Sheet Steel

powder coated MCB distribution board -

flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs 1 Each 885.77

should be used of same company of

MCB to be used) suitable for

(A) single phase incoming and

horizontal single phase outgoing

(b) sheet steel double door (IP-43)

40 Providing following type of Modular

Type Accessories mounted with PVC /

metallic/Wooden box, single mounting

base frame covered with textured /

metallic/white front plate , modules

erected with necessary connections as

per site situation directed by Engineer In

(1)One No. SP 6 Amp. Cat.II 12 Each 125.24

(2) One No 5 pin plug Cat. II 8 Each 125.24

(3)Two Pin/RJ-11 Telephone socket For 2 Each 131.3

One Gang Cat. II

(7) Blank Plate Single. Cat.II 10 Each 16.16

(9) 16 Amp.SP one way Switch 6 Each 131.3

(10) 6/16Amp. Universal socket. Cat.II 4 Each 140.39

(12) 6A/16A Two Way switch Cat.II 4 Each 131.3

41 Providing & erecting Switch board for

Computer or electric apparatus

consisting of following modular type

accessories mounted with PVC /

Metallic concealed/open box with

single mounting base frame covered

with textured/metallic /white front 2 Each 1033.23

plate,modules erected with necessary

connections as directed

1 no. 6A/16A universal plug-switch

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

42 Providing 1.80 mm th FRP sheet as per

instruction and fixing on fabricated

shade with bolts or screws as per

situation with necessary washer in 104.4 Smt. 321.18

given size and slope incl covering joints

and ridge line with overlapping,

including making Eaves at sloping end

43 Steel work in welded in built up section

framed work incl cutting , hoisting,

fixiing in position and applying priming

coat of red lead paint and 2 coat of oil

paint (a) in beam and joist , channels,

angles, Tees, flats, with connecting 23.5725 Qtl. 9108.48

plates or angle cleats as in main and

cross beams hip and jack rafter , purlins

connected to common rafters and the

44 Providing and laying paver block for

open space sorrounding the office

including clearing site, preparing level

surface, spreading 40mm thick sand 455.2 Smt. 886.68

layer, P.C.C. of 75 mm thick and laying

paver block with edge sealed with

cement mortar ,etc. complete.

45 Applying general insecticide pest

control treatment to

floors, cupboards etc including labour

complete. Using Imidacloprid

SCas Per IS 6313 part-II( (0.075%

concentration by mass) is 114.83 Smt. 80.62

10.5ml chemical diluted with 5 liters of

water application

0.5 litre chemical /Sqm of surface is

I/We am/are willing to carry out the work .................. % above/below percent(Should

be written in figures and words) of the estimated rate mentioned above. Amount of my /our

tender works out as under.

Estimated amount put to tender Estimated amount put to tender

below Above (between

In words In words

1) The Rate of Service Charges (Contractor profit and overhead charges) shall be between

% to 7 % (including 3.85% & 7%).

2) The tender having the quoted rate for service charges (Contractor profit and overhead

charges) above 7 % or less than 3.85 % shall be rejected.

3) Above mentioned amount per unit is including EPF,ESI, Miscellaneous provision and & all taxes

4) Service charges means the C.P. & O.H. charges.