TENDER NO 49/EDCL/2025-26

Amount

Carriage, Loading and unloading of following and other materials which are included in the estimate from Store centre to work site materials and its stacking. Distance approx (0-50) Kms. EDD Mitauli.

PCC pole 8.5/9 Mtr long

STP Pole 9/11 Mtr. long.

PCC pole 11 Mtr. long.

Line Material. i.e. cross arm/ pin insulator/stay/earthing rod/Ms Channel/MS Angle/ Disc Fitting/Disc Insulators etc.

T/F 10/16/25KVA

T/F 63/100 KVA

ACSR Rabit/Dog /Racoon/Weasel conductor

ABC( 3x120/95/70/25/16) Sqmm.

11 KV XLPE Cable (3x35/70/120/185/240)

11 KV Pilfer proof Metering cubical and CT PT Unit

DP Box 3 Phase

Fabrication, erection of sub-station type double pole on 8.5 mtr long PCC/11 Mtr. Long ST pole along with fixing of necessary hardware of double pole alongwith necessery pin insulators as per RESSPO Norms.

Dragging of ST/PCC pole to pit site, digging of pit erection and grouting (As per RESSPO Normsnorms) of 11KV 9/11/8.5 mtr long ST/PCC pole with fixing of necessary items, such as V-type X-arm, F-bracket, 11KV Pin/Disc insulator, guarding angle(1.8 mm65x65x6) with nut & bolts its ramming as per RESSPO Norms.

Dragging of ST/PCC Pole from dump store to pit site, digging of pit erection & grouting (As per Cost Data Book) of LT support suitable for laying of ABC line on 8.5mtr long PCC pole by providing of necessary eye hook/LT shackle insulator with clamps and its accessories etc. as per RESSPO Norms. Only Pole will be provided by the department.

Fabrication, erection T-Off pole single section pole along with T-Off channel clamp disc fitting & pin accessories, grouting in 1:4:8 cement sand and brick ballast as per RESSPO Norms.

Providing and fixing of 11 KV DO fuse set along with clamps & nut bolts on existing of double pole.

Fixing of 11 KV TPMO along with clamps & nut bolts on existing of double pole.

Ordinary earthing by MS earth Rod 2500mm long as per RESSPO Norms. Only GI wire& Earth rod shall be supplied by the department.

Grouting and Nuzzling of stay set complete including fixing of necessary clamps. Accessories required including its grouting by civil material (Sand: brick ballast: cement). Only stay rod and Stay wire shall be supplied by the Department.

Laying and sagging of 3 phase 3 wire 11 KV line on ACSR weasel/rabbit/Raccoon/Dog conductor as per RESSPO Norms.

Providing and fixing of guarding angle on existing 11 KV support with clamp and nut bolts.

Cradle guarding of HT line by GI wire. GI wire shall be supplied by the department.

Erection & commissioning of (3x120/95/70/25/16 Sq.mm) Aerial Bunched Conductor.

Laying of cable 11 KV XLPE cable (3x35/70/120/185/240) sqmm in pakka road by boring method laying cable as per RESSPO Norms.

Laying of cable 11 KV Through piping .

Hoisting of 11 KV XLPE Cable will be passed through MS pipe of required size duly clamped with pole at the bottom, middle and top of the pole.

Supply and fixing of 11 KV Cable joining kit O/D and I/D.

Installation of 11 KV CT/PT on double pole connected with metering unit along with providing and fixing of all accessories such as S/S base, MS flat, clamps, nut and bolts its jumpering and commissioning.

Dragging of 11 KV Pilfer metering cubical inside the metering room, its installation and commissioning.

Fixing of 3 phase distribution box/kiosk on the LT poles including all clamps and material required for mounting connections and sealing.

Making section of 11 KV line by fixing of All necessaries accessories such as T-Off channel disc insulator with fitting pin insulator with pin along with sagging jumpering and binding etc only insulator shall be provided by the dept.

Cutting and chopping of tree branches for clearance of HT/LT Line. After clearance line throughout pieces of tree branches of site.

Safe installation & energisation of 10/16/25/63/100 KVA T/F on double pole by providing and fixing of L-piece, Lugs making HT/LT connections and its commissioning. Only Transformer shall be supplied by the deppt.

Safe installation & energisation of 250 KVA T/F on double pole by providing and fixing of L-piece, Lugs making HT/LT connections and its commissioning. Only Transformer shall be supplied by the deppt.

Construction new Fencing of 100/250 kVA distribution Transformers installed under EDD-Mitauli by MS Sqaremesh fabricated on MS angles of size 50X50X6mm and MS strip having overall dimension complete with one no gate with provision of hinges roller & lacking arrangement properly grouted and painted with one coat of Red Oxide primer and two coasts of Bus Green Super enamel Paint.

Construction new plinth of 100/250 kVA Distribution transformer of size 5x5x4 Fit with first class bricks, cement and coarse sand as per RESSPO Norms alongwith cost of materials.

Work for earthing of Distribution Transformer with G.I. Pipe type earthing pipe size 3cm dia from ground up-to the water level (Minimum 20 feet deep) as per standard practice (All materials shall be provided by the contractor) in work area of EDD-Mitauli

Supply of top Droper T-off clamp

Fabrication T-Off, Top, Droper, S/s Base, Gaurding Angal

Supply of Net-Bolt i-type

Supply of 16 kva T/F Holding Clamp

Supply of LT Clamp for PCC/ST Pole

Supply of Holding Clamp for PCC/ST Pole

Supply of F-Clamp

Supply of Stay Clamp

M/S NEW STAR TRADERS (BID ID -5764429)

Affinity Infracon (BID ID -5764474)