Special repair to Bldg No T-141, T-142, T-143, T-147, T-148 GE(Army) Central in Army area Jodhpur

Amount

Demolition pcc flooring (un reinforeced) of any description and any position as in flooring plinth protection etc

M/L for 20mm thick cement concrete type B-0 1:2:4 (using 12.5 mm graded crushed stone aggregate) complete all as specified and as directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:6 floor finished even & rough to recievr tiling/floor finish

M&L for non skid colour ceramic tiles of size( 400x400x7 to 8mm) thick joint free area exc 0.11 sqm but nexc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match& all as specified.

All as per item No 4 above but skirting/dado

M&L 50 mm thick PCC (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection

M&L for 10mm thick rendering in CM 1:3 over stone masonary surfaces incl finishing the surface fair & rough to receive tiling etc

M&L non skid / mat finish ceramic colour tiles of size 300 mm x 300 mm and 7 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster on stone masonry RCC surfaces, dado surfaces etc complete incl racking out joints, hacking for key scrubbing down with water

M&L for 15mm thick rendering in CM 1:6 finished even and smooth without using extra cement on stone wall surface all as specified.

M&L for glazed colour ceramic tiles of size 250x350x7mm/250x375x7mm thick laid in vertical surface dado/skirting joint free etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles.

M&L Green marble slab, 16-18mm thick machine cut as cooking platform or in any position, set and bedded in gray cement slurry over & including 15mm thick screed in cement mortar (1:4) and pointed in white cement with admixture of pigment to match the shade including cutting, polishing (mirror type) complete all as specified.

Dismantling of stone slabs laid dry but jointed & pointed in CM

M&L for Jodhpur stone roof slabs self faced 7.5cm to 10cm thick , 25cm to 35cm wide ,hoisted and set jointed and grouted in CM 1:6

M&L for Jodhpur stone roof slabs self faced 7.5cm to 10cm thick , 25cm to 35cm wide ,hoisted and set jointed and grouted in CM 1:6 but except stone slab.

M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified Including dismantaling of existing sheet complete all as directed.

S&F machine made precast cement concrete blocks (interlocking paves) colour rubberised of 60mm thick with 6mm top layers of ante abrasive material laid over 25mm thick sand cushion . The interlocking joints shall be filled with fine sand . The compressive strength of layer shall not be less than 350 kg/Cm2

M&L for anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws locking arrangement etc.completeallasspecified

Demolition of stone masonry built in cement mortar

M&L for squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6 all as specified and directed

All as per item No 20 above but except stone

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 all as specified.

M&L for Flush pointing to square rubble masonry Jodhpur type regular course in CM 1:3 all as specified.

M&L preperartion of newly plastered surfaces of wall and applying two coat of wall putty for even and smooth surfce and applying two coat of oil bound distemper complete

M&L preperartion of newly plastered surfaces of wall and applyin three coat of white wash complete

M&L preperartion of newly plastered surfaces of ceilling and applying three coat of white wash complete

M&L for one coat of white wash old wall surfaces incl preparation.

Taking down steel window/ventilator

Taking down of chowkats or frames w/o taking down shutters area nexc 1.50 Sqm

All as per item No 31 but area exc 1.5Sqm but not exc 4.00 sqm

Dismantling of boarding of any description and in any position complete all as specified.

M &L for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of syn enamel paint on int surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete all as per drg no CEBZ/TD/12/2008 sht 1/3 to 3/3

Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.

All as per item 35 above here-in-before but size 125x60mm with double rebate.

M & L for mild steel framed work as in brackets etc for coller stands etc framed steps/stairs etc complete using MS angle iron Steel bars gusset plate etc complete all as specified & directed complete.

S/F of 35mm thick factory made skeleton shutters, open rebated and prepared to receive wire gauze etc, edge of framing shall be plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc.,

S/F of 35mm thick factory made partly glazed and partly panelled shutters, open rebated and prepared to receive wire gauze etc, edge of framing shall be plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc.,

S/F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, all as specified..

M/L for solid PVC door frame of size 50x47mm made out of 5mm thick pvc sheet reinforced with MS square tube all as specified.

Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified (with or without cooler opening as directed by engr-in-charge)

Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified .(with or without cooler opening as directed by engr-in-charge)

Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified

S&F Flush shutters 35 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specifid and directed by engr-in-charge.

Supply and fabrication of Mild steel guard bars and welded to window frames all as specified.

S/F of aluminium anodized,tower bolt 200 mm long

S&F alum anodised handle extruded section of size 150mm long

S/F of aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete

S &F of stainless steel butt hinges 100 mm size.

S&F 100mm size single action door spring hinge complete

S&F floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 140mm long in repairs

M/L for two coat of synthetic enamel paint over a coat of pink primer on new wooden surface including preparation of surface, over 10Cm width or girth all as specified.

M/L for two coat of synthetic enamel paint over a coat of red oxide primer on steel surface including preparation of surface over 10Cm width or girth all as specified.

S/F for 3 mm thick plain sheet glass ordinary quality & glazing.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm

S&F MS with PVC coated decorative 25mm dia curtain rod with fixing brackets etc as in repairs

S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden cleats (Min weight 300 gms)

S&F soap dish of PTMT fixed with screws

S&F MS chromium plated peg set of five fixing with wall complete

Stainless steel ,1.00mm thick for kitchen or laboratory with plug ,washers waste pipe , cast iron cantilever brackets connecting union overall size 495mmx420mm with bowl size 410mm x 330mmx160mm as in repair

S&F stainless steel1 mm thick kitchen plate rack size 750X600X200mm complete fixed on wall.

S&F as in repairs of vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, flush pipe of 32mm dia HDPEpipe etc all as specified.

M/L Vitrous china wash basin , white flat back size 550x400 mm mm including 15 mm dia CP fancy type pillar tap , waste pipe, MS brackets and PVC connection 15 mm dia 450 mm long complete all as specified fixed in repair.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 100mm bore as directed

All as per item No 66 above but 75mm dia

S&F PVC (SWR) pipes single socketd in any length with rubber rings joints laid in trenches or in floors 110mm dia complete

All as per item No 68 above but fixed in wall

All as per item No 68 above but 75mm dia laid in trenches

All as per item No 70 above but fixed in wall

S&F PVC (SWR) branch pieces single socketed Y equal or unequal 110mm dia

S&F PVC (SWR) bends any radius 110mm dia

All as per item No 73 above but 75mm dia with oval acess door

S&F PVC (SWR) vent cowl 110mm dia

S&F PVC (SWR) vent cowl 75mm dia

S&F of PVC (SWR) floor trap plain grating including jointing with solvent cement 75mm dia

M&L PVC (SWR) guly trap 125/110mm setting and jointing with solvent cement

Taking down or up steel tubing and connection including cleaning for refixing or removal to site 25 mm dia

All as per item No 79 above but 20 mm dia

All as per item No 79 above but 15 mm dia

S/F of water tubing, medium grade, galvanized, with all fittings fixed to wall ceiling or laid in floor all as specified. 25 mm dia,

All as per item No 82 above but 20 mm dia

All as per item No 82 above but 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc complete.

S/F of chromium plated shower rose 15 mm dia 195 mm long with bend of 450mm with or with out swivel joints, any size, including fixing to steel pipe all as specified.

S/F as in repairs of stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia all as specified specified.

S/F as in repairs of 15mm dia angular stop cock with chromium plated long thread with flange complete

S&F 15mm dia chromium plated stop cock with flange complete

S&F 15mm dia chromium plated bib cock with flange complete

Supply only low level flusing cistern PVC 10 ltrs capacity with float valves (ISI Marked) white with inlet ball valve including float and includign pvc connection complete

Dismantling water tanks of capacity exc 250 ltrs but.nexc 500 ltrs and removing to site all as specified.

S&F rotational moulded polythene water storage tanks (cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part -I capacity of tank 500 ltrs including tank led cover complete with fixing arrangement

S&F 20mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms in repairs.

M&L PCC (1:2:4) type B1 using 20mm graded stone aggregate for water tank plinth all as specified 50 mm thick

M&L for MS TMT bars 6 to 8mm dia and over, cut to length , bent to shape required including cranking, bending & binding with MS wire (annealed ) not less than 0.9mm dia or securing with clips, as in stirrups also & all as specified.

Providing precast RCC 1:2:4 type B1 using 20mm graded stone aggregate as in cover slab for man hloes set in CM 1:6 .

M&L sand stone slabs in sunshades, chajjas, shelves, cills, landings cover stones templates etc n exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4 thickness of slab 5cm complete

M&L for roughly squared stone lintels hammer dressed on face and soffits hoisted set and pointed in CM (1:6) complete n,exc 3 m in length

M&L for PCC solid block 10 cm thick type B1 1:2:4 using 20mm graded stone aggregate set in cement mortar 1:6 complete all as specified and directed.

Excavation in trenches for fdn n.exc 1.5m wide and n.exc 1.5m in depth & getting out in soft /loose soil

Excavation in trenches n.exc 1.5 mtr wide and n. exc 1.5 mtr depth for foundation, forshafts, wells,cesspits, manholes, Pierholes etc n. exc 10 sqm on plan and n. exc 1.5 mtr in depth and getting out in hard dence soil.

All same as item No 101 above but exc 1.5 mtr and n.exc 3.0 mtr deep.

Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm thick

Removing excavated material n. exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified.

M & L cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate for 150 mm dia pipe complete all as specified and directed.

Supply & laying jointing and testing 150mm bore reinfirced conctete pipes class NP-2 laid and jointed in cement mortor 1:1 complete with collars or socket/spigot type laid jointed and haunching at side in cement complete all as specified and directed.

All as per item No 106 above supply and laying of RCC drain pipe 200 mm dia class NP-2 laid and jointed complete with collars.

Material and labour for plain cement concrete 1:3:6 type C-1 using 20mm graded crushed stone agg as in coping of manhole including necessary form work complete all as directed.

Writing letters or figures (Black Roman, Italic or Indian n. exc 30cm high with thick paint complete all as specified

Taking down existing old tar-felt from RCC roof, stone and other treatment (brick bat coba) etc. careully including cleaning roof surface by wire or coir brush and removing all grits ,stone,fungus,moss and finnaly washing down with water to the entire satisfaction of E in charge and removing debrish and rubbish out of the premises to a distance exc. 1.0 km but not exc 2.5 Km complete all as specified and directed.

M&L for PCC 1 : 2 : 4 Type B1 using 20 mm graded stone aggregate as in levelling course to the roof surface complete all as directed by Enginer-in-Charge.

M&L for carrying out water proofing treatment for roofs in the following stages. (i) M&L for rendering 10mm thick in 1:4 mixed with integral water proofing compound all as per mfr inst over conc surfaces finished even and smooth w/o using extra cement. (II) First coat of bitumen primer confirming to IS 3384 @0.40 Kg/Sqm over plastered surafces (III) Second coat of binding material using blown type bitumen confirming to IS -702 Grade 85/[email protected] kg per Sqm IV) Third layer of APP modified polymeric membrane centre core of 20 micron HMHDPE , other film 20 micron each thickness 2 mm having weight 2.25 Kg/sqm (V) Final coat of binding material using blown type bitumen confirming to IS 702 of Grade 85/25@ 1.2 Kg/Sqm (vi) Material and labour for 40 mm thick cement concrete type B-0 (1:2:4) using 12.5 mm graded stone aggregate padding over roof laid in slope grooves 6 mm wide and 10 mm deep at 1.2 m interval in both ways or part thereof and filled with mastic bitumen (1:1) proportion complete all as specified and as directed

Supply only Integral water proofing compund (ISI marked).

Taking down carefully copper/aluminium point wiring for light, fan, bell socket power slocket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose etc complete

Point wiring complete with 1.5 sqmm, single core, multi stranded, copper conductor, PVC (FRLS), insulated, unsheathed cable, confirming to IS-694, 1100 volts grade, ISI marked (class V conductor), in and including PVC concealed conduit (MMS), ISI marked not less than 20mm, with accessories fixed on surface of wall/roof/ceiling etc and including sunken pressed steel terminal boxes in wall but including 3mm thick plastic laminated sheet top cover (ISI marked hylem sheet Make Anchor and 1.50 sqmm PVC insulated unsheathed stranded copper conductor for common earth and connecting to earth dolly material and labour for :- One light point controlled by one, one way switch

All as per item No 116 abvoe but One fan /Exhaust fan, point controlled by one way switch.

All as per item No 116 abvoe but One socket outlet 3 pin 6 Amps on same board

All as per item No 116 abvoe but One socket outlet 3 pin 6 Amp on independent board

All as per item No 116 above but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board .

S&F switch flush type single pole one way 6 Amp ISI Marked

S&F switch flush type single pole one way 16 Amp ISI Marked.

S&F socket out let , 5 pin , 6 Amp FT.

S&F socket out let , 3 pin ,16 Amp FT. ISI Marked

S&F only bell push , FT 6 Amp ISI Marked.

S&F bell AC 230V , SP , ISI Marked.

supply and fix socketed stepped type electonic fan regulator flush type , ISI Marked.

S & F Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body

S&F insulated Batton lamp holder metal cased body of brass with back plate suitable for batton fittings including 9 watt LED Lamps ISI Marked.

S&F LED tube light fitting Box type 20 watt complete with all accessories such as bipin holders connector block, etc internally pre-wired , including LED lamp-1No, connectiong up with , multistranded copper conductor of size 1.00 sq mm flexible cable complete all as specified.

Supply and Fixing only Bldg security light fitting 30 watt LED , IP-65 protection, single peice pressure dia cast aluminium alloy housing high grade powder coated finish with heat resistant toughned clear glass cover for lamp and contror gear compartment with high voltage surge protection device, etc.

S&F distribution board in sheet metal with 200 Amps rated copper bus bar Confirming to relevant IS.SPN 8 way, Make;--Indo Asain/ STANDERD/Havells Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface.

S&F MCB Single pole 5 to 30 Amp, 10 kA, ISI Marked.

S&F MCB SPN 63 Amp, 10 kA, ISI Marked.

Supply and fix existing location and position SPEM 01, IS 13779 phase 2 wire , class 1, capacity 05-60 Amp rating electronic LCD display , optical port temper proof , LCD screen having scroll reading MAKE : HPL/SECURE/SIEMENS (NOTE. The rates are deemed to be included for providing pin type cable end connector at incoming and out going wire- 4 N

Supply and replac temper proof engineering plastic transparent poly carbonate enclosure having-2nos push button, having PVC gland for incoming & outgoing cables,earth, sealing and provision for box and meter both connecting cable from optical port to adaptor of approprate size, MAKE : HPL/SECURE/SIEMENS (NOTE. The rates are deemed to be included for sealing complete enclosure all as directed.

M&L for providing of exhaust fan 300 mm , 230 volt, 50 Hz , heavy duty electrically and mechanically by all means complete with fastner nut , bolts & washers with louvers made out of MS incld making hole and matching existing surface complete up to entire satisfaction of Engg-in-Change after completion of electrical work Make : CG cat part no. EXHD300-6-1 or equivalent in Usha/Bajaj.

M & L For Ceiling Fan 1200 Sweep (5 Star rated) complete with fixing arrangement etc. Complete Make : Cromption Greaves/Havells/Bajaj .

Supply and lay cable XLPE insulated screened meter PVC bedded gal vanized steel strip or wire armored , electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sq mm 4 core.

M/S JAGDAMBA ENTERPRISES

Om Trading Corporation

mahalaxmi enterprises

RISING ELECTRICALS

M/S KAUTILYA GARG

S.G.ENGINEERING COMPANY