Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance S F NO 472 C3 VINAYAGA GARDEN SUKKALIYUR KARUR 639 003 | KARUR | KARUR | TAMIL NADU | 639003 | Admitted-Finance |
| 2 | Admitted-Finance 2 2F NORTH SALAPATTI THIRUVELLARAI VIA MANACHANALLUR TK TRICHY DT | MANACHANALLUR | TRICHY | TAMIL NADU | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹15,000
Closing Date
4 Dec 2020, 2:00 pmClosed
The Superintending Engineer/ TEDC/ Metro/ Trichy
Office of the Superintending Engineer, Trichy Electricity Distribution Circle, Metro, Mannarpuram, Trichy-20.
Modification and improvement of existing control room for accommodating control panels, installation of 110 v batteries, construction of cable ducts, new store room, water supply to earth pits in Gunaseelam 33 / 11 kV SS.
2020_EB_185913_1
Specification No.32/2020-21
Open Tender
Civil Works
Works
90 days
GUNASEELAM
REFER TENDER SPEC
2 documents required · 2 mandatory
₹0
₹15,000
Yes
14 Dec 2020
24 Nov 2020
5 Dec 2020
24 Nov 2020
4 Dec 2020
24 Nov 2020
24 Nov 2020 - 3 Dec 2020
Amount
Dismantling and clearing away from site to the designated place as directed by the engineer at site including labour, lead and lift etc., complete.
B.W in CM
Floor finish in cement mortar with tiles
Earthwork excavation &depositing on bank with initial lead of 10m & initial lift of 2m in sand, silt or other loose soil, wet sand not under water and ordinary soil including cost of all labour, lead,lift,etc.,complete. (SS 20A)
Supply and filling with Msand for foundation including watering, consolidation etc.,complete.
PCC 1:4:8 using 40m HB stone for foundation including cost of al materials and labour etc., complete
RCC 1:1.5:3 using 12- 20mm HB stone with form work for Raft including cost of all materials lead and lift etc., complete
RCC 1:1.5:3 using 20mm HB stone with form work to RCC column portions Including cost of all materials lead and lift etc., complete
RCC 1:1.5:3 using 20mm HB stone with form work for grade beam Including cost of cement all materials lead and lifts etc., complete
RCC. 1:1 1/2:3 mix using 12 mm to 20mm HBS metal(machine crushed) for sunshde with formwork including cost of all labour, materials, lead, lift, etc, complete but excluding cost fo steel reinforcement (by using mixer machine).
Sill slab
Sunshade
RCC. 1:1 1/2:3 mix using 12 mm to 20mm HBS metal(machine crushed) for Lintel / Roof Beam with formwork including cost of all labour, materials, lead, lift, etc, complete but excluding cost fo steel reinforcement (by using mixer machine).
RCC. 1:1 1/2:3 mix using 12 mm to 20mm HBS metal(machine crushed) for Roof Slab with formwork including cost of all labour, materials, lead, lift, etc, complete but excluding cost fo steel reinforcement (by using mixer machine).
RCC 1:1.5:3 using 20mm HB stone with form work for wall Including cost of cement all materials lead and lifts etc., complete
RCC 1:1.5:3 using 20mm HB stone with form work for precast slab Including cost of cement all materials lead and lifts etc., complete
Providing steel reinforcements for RCC works inducing cost of steel, binding wire and labour for cutting bendng tying and placing in position etc., complete.
Brick Work in Cement mortar 1:5 using chamber burnt bricks of standard size including cost of all materials, labour, lead, lift, etc., complete.
Plastering in CM 1:3, 15mm thick for ceiling including cost of all materials labour charges etc., complete.
Plastering the walls with CM 1:5,12mm thick including cost of all materials,labour,lead,lift etc complete.
Special type of ceiling plastering with CM 1:3 - 10mm thick by using special bonding agent and repair material including chipping of concrete, cost of materials,curing, labour, lead,lift etc., complete.
Special type of Wall Plastering with CM 1:5, 12 mm thick including chiping ,cost of all materials ( Repair material, bonding agent etc., ) curing, lead, lift etc., complete.
Flooring with good quality double charged vitrified tiles/Non slippery tiles of size 600mmx600mmx8mm in CM 1:3 of approved quality and colour including cost of all materials lead,lift etc complete,
Flooring with good quality ceramic tiles/Non slippery tiles of size 305 mmx 305 mmx 6mm laid over 20mm thick CM 1:3 of approved quality and colour including cost of all materials lead,lift etc complete,
Dadooing walls with glazed tiles of size 300 x 200 x 6 mm laid in cement mortar 1 : 2 , 10 mm thick and pointing with white cement using 0.4 Kg / m2 including finishing the joint and pointing flush with tiles surface etc., complete.
Flooring with good quality of solar reflective ceramic Tiles with a size 305x 305 x7 mm of approved make laid with proper slope to drain off water in CM 1:2,min 20 mm thick including cutting the tiles to the required size wherever necessary, laying in position and pointing with white cement as per instructed by engineer at site including all lead,lift etc.,complete.
Replacing the damaged water closet with new one including supplying and fixing in postion Indian Water Closet (Oriya Type) of approved quality, colour with all accesories including cost of all materails, labour, lead, lift etc., complete.
Supplying, fixing and laying of 110 mm dia PVC pipe 6 Kg/cm2 for sanitary arrangements including cost of all materials labour lead,lift etc complete.
Supply and fixing PVC down fall pipe of 4 Kgf 110 mm dia with necessary coupling grating , shoes, bends, clamp etc., complete including cost of all materials labour lead ,lift etc., complete.
Supplying and fixing of wash hand basin of size 550mm x 400mm with all accessories such as brackets , waste coupling, waste pipe, etc., including cost of all materials, labour lead, lift, etc., complete.
Supplying cuddapah slab polished both sides for Cup-Board 40mm thick including cost of all materials, leads and lifts and fixing in position, including one coat of black paint in both side, etc., complete as per standard specification.
Fabrication, supply and fixing of MS steel door and window grills using required angles, flats and square bars including cost of all necessary fittings,painting with two coats of enamel paint, cost of all materials, labour, lead, lift etc., complete as instructed by the Engineer.
Painting two coats with Ready mixed paint over old Grill work for the existing window including cleaning preparing the surfaces, cost of all labour, lead, lift etc., complete.
Through Scrapping of old Plastered surface,including labour,materials,lead,lift, etc.,complete.
White washing two coats with white cement including cost of all materials,labour lead,lift etc complete
Interior painting with two coats with approved quality distember on application of one coat of distemper primer including cost of all materials,lead,lift etc complete
Exterior painting with two coats of approved exterior emulsion over one coat of primer for wall including cost of all materials, labour, lead, lift, etc., complete.
Providing PVC door of suitable size as instructed by the Engineer at site including cost of all materials, labour, hinges and other furniture fittings , lead, lift etc., complete.
Supplying, fixing and laying of PVC pipe 10 Kg/cm2 for water supply arrangement including cost of all materials, labour, lead, lift etc complete.
63 mm / 6 Kg/cm2
Supply and fixing of Anodised Aluminium Towel Rail 60cm long and 20mm dia with Brackets including cost of all materials, labour lead, lift, etc., complete.
Supply and fixing of PVC / Fibre Glass Framed 5.5mm thick Mirror, Shelf Type with Hard Board Backing size of 600mm x 450mm including cost of all materials, labour lead, lift, etc., complete.
Supplying and fixining of Brass Chromium Plated Pillar Tap (Heavy Type) - 15 / 12mm dia including cost of all materials lead, lift, labour etc., complete
Supplying and fixing of PVC screw down tap including cost of all materials, labour lead, lift, etc., complete.
M & F in position of anodized aluminium glazed sliding window of size 1.20 x 1.35m as per ISS 1038-1958 (1245 ISS) using aluminium sections window frame bottom two track sliding 61.85 x 31.75 x 1.50mm @ 0.909 Kg / m, top & side 61.85 x 31.75 x 1.50mm @ 0.784 Kg / m shutter plain out side 40 x 18 x 1.55mm @ 0.547 Kg /m shutter inner lock 40 x 18 x 1.45 mm @ 0.607 Kg /m shutter runner top & bottom 40 x 18 x 1.55mm @ 0.547 Kg / m with glazing clips rubber gaskets sliding wheel & 5mm thick sun cool glass panelling including cost of all materials, locking arrangements labour, lead, lift, etc., complete.
Repairing the existing damaged Aluminium door/glass windows by replacing the broken glass panels, placing in position, providing necessary fittings as instructed by the Engineer at site including painting , cost of all labour, lead, lift etc., complete.
T GOVINDARAJAN
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .