Construction of New Sub Center Building at Village: Amdada, Ta & Dist: Bharuch under CSR initiative by DGVCL 2025-26

Name Of Work :- Construction of New Sub Center Building at Village : Amdada, Ta & Dist : Bharuch under CSR

initiative by DGVCL 2025-26.

SR. NO. ITEM DESCRIPTION Total Qty UNIT TOTAL AMOUNT

SR. NO. ITEM DESCRIPTION Total Qty UNIT TOTAL AMOUNT

Excavation for foundation upto 1.50 mt depth including sorting out and

1 stracking of usefulmaterials and disposing the excaveted stuff upto 50 mt lead 50.00 203.83 Cu.Mt

(A) Loose or Soft soil.(Executed with Manual labour)

Excavation for foundation for depth from 1.50 to 3.00 mt including sorting out

2 and stracking of usefulmaterials and disposing the excaveted stuff upto 50 mt 40.00 224.95 Cu.Mt

lead . (A) Loose or Soft soil. (Executed with Manual labour)

Filling available excavated Earth (Excluding Rock ) in trench plinth side of

3 foundation etc. in layer not excluding 20 cm in depth consolidation each 147.00 130.39 Cu.Mt

deposited layer by ramming and watering etc. complete

Filling in plinth with sand under floors including watering

4 ramming,consolidating, and dressing etc comp. 8.00 460.19 Cu.Mt

Filling foundation and plinth with murrum or selected soil in layer of 20 cm in

5 thickness including ramming watering and consolidating and dressing etc. 53.00 289.06 Cu.Mt

Add extra for disposing off the excavated stuff with all lead and lift. upto 400m -

Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 hand

7 broken stone aggregate 40mm nominal size and curing comoplete excluding cost 14.00 2650.31 Cu.Mt

of form work in (a) Foundation and plinth.

Providing and laying ordinary cement concretee 1:2:4 (1 Cement : 2 Coarse

sand : 4 grded stone aggregate 20mm nomial size) and finishing smooth with

curing etc. complete including the cost of form work but excluding the cost of

reinforcement for RCC work In Plinth slab having 10cm thickness.

Providing and laying controlled cement concrete M250 work with curing etc.

complete including the cost of from workbut excluding cost of Reinforcement for

9 RCC work in (A) Foundation footing base of columns and mass concrete. 6.00 4097.57 Cu.Mt

Providing and laying controlled cement concrete M250 work with curing etc.

complete including the cost of from workbut excluding cost of Reinforcement for

10 RCC work in (Up to plinth level ) (B) Columns. 6.00 7806.29 Cu.Mt

Providing and laying controlled cement concrete M250 work with curing etc.

complete including the cost of from workbut excluding cost of Reinforcement for

11 RCC work in (Up to plinth level ) (C) Gr. Beam, Plinth Beams. 6.00 6485.21 Cu.Mt

Providing and laying controlled cement concrete M-200 with curing etc.

complete including the cost of form work but excluding the cost of reinforcement

12 for R.C.C. work in column for up to floor two level. (G.F.) (B) Columns. 3.97 8358.76 Cu.Mt

Providing and laying controlled cement concrete M-200 with curing etc.

complete including the cost of form work but excluding the cost of reinforcement

13 for R.C.C. work in column for up to floor two level. (F.F.) (B) Columns. 4.00 8358.76 Cu.Mt

Providing and laying controlled cement concrete M-200 with curing etc.

complete including the cost of form work but excluding the cost of reinforcement

14 for R.C.C. work in column for up to floor two level. (S.F.) (B) Columns. 2.00 8396.84 Cu.Mt

Providing and laying controlled cement concrete M-200 with curing etc.

complete including the cost of form work but excluding the cost of reinforcement

15 for R.C.C. work in Beam for up to floor two level. (G.F.) (C) Beam. 5.61 6421.58 Cu.Mt

Providing and laying controlled cement concrete M-200 with curing etc.

complete including the cost of form work but excluding the cost of reinforcement

16 for R.C.C. work in Beam for up to floor two level. (F.F.) (C) Beam. 6.00 6421.58 Cu.Mt

Providing and laying controlled cement concrete M-200 with curing etc.

complete including the cost of form work but excluding the cost of reinforcement

17 for R.C.C. work in Beam for up to floor two level. (S.F.) (C) Beam. 2.00 6459.66 Cu.Mt

Providing and layingcontrolled cement concretee M-200 for RCC

Lintel/Copping including finsing sooth with curing etc. complete including the

18 cost of form work but excluding the cost of rainforcement (G.F.). 10.00 5983.24 Cu.Mt

Providing and layingcontrolled cement concretee M-200 for RCC

Lintel/Copping including finsing sooth with curing etc. complete including the

19 cost of form work but excluding the cost of rainforcement (F.F.). 3.00 5983.24 Cu.Mt

Providing and laying controlled cement concretee M-200 for Chajjas not

20 exceeding 10 cm thickness up to floor two level including the cost of form work 2.00 6506.42 Cu.Mt

and curing complete excluding cost of reinforcment (G.F.) .

Providing and laying controlled cement concretee M-200 for Chajjas not

21 exceeding 10 cm thickness up to floor two level including the cost of form work 2.00 6506.42 Cu.Mt

and curing complete excluding cost of reinforcment (F.F.) .

Providing and laying controlled cement concrete M-200 with curing etc.

22 complete including the cost of form work but excluding the cost of reinforcement 2.00 5132.82 Cu.Mt

for R.C.C. work up to floor two level (G.F.) (D) Stair case.

Providing and laying controlled cement concrete M-200 with curing etc.

23 complete including the cost of form work but excluding the cost of reinforcement 2.00 5132.82 Cu.Mt

for R.C.C. work up to floor two level (F.F.) (D) Stair case.

Providing and laying controlled cement concrete M-200 with curing etc.

24 complete including the cost of form work but excluding the cost of reinforcement 6.00 6389.26 Cu.Mt

for work for any thickness of Slab etc. complete. (G.F.).

Providing and laying controlled cement concrete M-200 with curing etc.

25 complete including the cost of form work but excluding the cost of reinforcement 6.00 6389.26 Cu.Mt

for work for any thickness of Slab etc. complete. (F.F.).

Providing and laying controlled cement concrete M-200 with curing etc.

26 complete including the cost of form work but excluding the cost of reinforcement 2.00 6427.34 Cu.Mt

for work for any thickness of Slab etc. complete. (S.F.).

Providing T.M.T. FE 415 (Thermo Mechanically Treated bars) bar reinforcement

for RCC work including binding and plassing in position complete for all floor

Brick work using common burnt clay conventional building bricks having

crushing strength not less than 35 Kg/ Sq.Cm. In foundation and plinth in

28 cement mortar 1:6 (1 Cement: 6-Fine sand) with curing etc. (b) 18.00 4021.02 Cu.Mt

Brick work using common burnt clay conventional building bricks having

crushing strength not less than 35 Kg/ Sq.Cm. In Super Structure above plinth

29 level up to floor two level (G.F.) in cement mortar 1:6 (1 Cement: 6-Fine sand) 30.00 4289.33 Cu.Mt

with curing etc. (b) Conventional.

Brick work using common burnt clay conventional building bricks having

crushing strength not less than 35 Kg/ Sq.Cm. In Super Structure above plinth

30 level up to floor two level (F.F.) in cement mortar 1:6 (1 Cement: 6-Fine sand) 52.00 4329.82 Cu.Mt

with curing etc. (b) Conventional.

Half brick masonry in common burnt clay conventional bricks having crushing

strength not less than 35 Kg/ Cm2 in cement mortar 1:4 (1 cement : 4- Coarse

31 sand) in super structure above plinth level up to floor two level (G.F.) (b) 36.00 640.33 Sq.Mt.

Half brick masonry in common burnt clay conventional bricks having crushing

strength not less than 35 Kg/ Cm2 in cement mortar 1:4 (1 cement : 4- Coarse

32 sand) in super structure above plinth level up to floor two level (F.F.) (b) 45.00 646.33 Sq.Mt.

Provoding and fixing flush door shutters, solid core construction with frame of

first class hardwood with cross board and face veneer or plywood face panels,

33 including anodised alluminium butt hinges with necessary screws. (B) Non- 9.00 1797.77 Sq.Mt.

decorative type and block board core anodised alluminium butt hinges in flush

door shutters (2) 35 mm thick.

Providing & fixing window having extruded Aluminum Colour anodized section

frame main outer size 63.50 x 38.10 x 1.95 mm (of Jindal Section no. 4605, @

Wt. 1.094 kg/Rmt),horizontal two track member size 61.85 mm x 31.75 mm x

1.20 mm (of Jindal Section no. 8687, @ Wt. of 0.695 kg/mt), vertical member of

size 61.85 mm x 31.75mm x 1.30 mm (of Jindal Section no. 8758, @ Wt. of

0.659 kg/mt) with sliding shutters of horizontal member size 40mm x 18 mm x

1.29 mm (of Jindal Section no. 8949, @ Wt. of 0.456 kg/mt), vertical member of

size 40 mm x 18 mm x 1.29 mm (of Jindal Section no. 8947, @ Wt. of

kg/mt/section 8948, @ Wt. 0457 kg/mt) with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc complete for

Providing and fixing of fully glazed solid PVC panel PVC door along with solid

OVC door frame 30 mm thick FACTORY MADE FULLY GLAZED SOLID PVC DOOR

SHUTTER consisting of frame made out of M.S. tube of 19 gauge thickness and

size of 19mmx19mm for style and 15mm x 15mm for top, lock and bottom rail.

M.S. frame shall have a coat of steel primer of approved make and manufacture.

M.S. frame shall be covered with 5mm thick heat mouled PVC "C" channel of

size 75mmx30mmx50mm out of which 10mm shall be bent at 90 degree

towards inner side on front face of the door, M.S. frame at lock rail shall be,

covered with 125mm wide PVC sheet out of which 0mm on both the edges shall

be bent at 90 degree on front face of the door and 7mm wide PVC sheet shall

be bent at 90 degree on front face of the door and 7mm wide PVC sheet shall

cover the M.S. frame at top, lock and bottom rail on back side of door, 5mm

thick 20mm wide cross pvc sheet as gap insert for top and bottom rail PVC sheet

beading of 15mm thick (5mmx3) 15mm wide to be stuck internally with solvent

cement adhesive in stiles and rails. Glass panel will be fitted externally in the

clear space available between the stiles and rails and fixed between PVC.

Providing and fixing 25 mm thick shutters for cupboards etc. including anodised

36 alluminium butt hinges with necessary screws. (A) Indian teak wood. (i) Fully 7.00 3064.44 Sq.Mt.

Providing & fixing standared extruded of Aluminium Section of size 63 mm x

38.10 mm x 1.2mm (Jindal Section 2434, @ Wt. 0643 kg per mt) with colour

37 anodized alluminium frame for ventilation with 5 mm thick frosted glass as 2.00 1175.56 Sq.Mt.

details etc complete for Ventilation.

Providing and fixing M.S. grills of required pattern to wooden frames of windows

etc. with M.S. flats at required spacing in and frame alround, square or round

38 bars with round headed bolts and nuts or by screws. (A) Plain Grill. (12MM 406.00 102.62 Kg

SQUARE BAR 3INCH C/C WITH 25MMX6 MM FLATS FRAME).

Providing and fixing Godrej Type Steel cupboards in wall withsteel frames and

shutters using 18 gauge M.S. steel sheet including necessary fixtures , fastening

39 like locks handles, hinges with approved shade of sparay painting etc complete 5.00 23230.00 Sq.Mt.

Providing and Laying 24"x24" (600mm x 600mm) Vitrified 8 mm thick tile

flooring over 20 mm (average) base of cement mortar 1:6 (1 cement : 6 corse

sand ) on new surface or fixing on existing flooring by adhesive material

40 including dismentaling of existing flooring and jointed with colour cement slurry 75.00 1415.77 Sq.Mt.

including finished with flush pointing & cleaning the surface etc. complete for

light shade. For Full Body Tiles / Double Charged.

.Providing & laying polished Kota stone slab flooring over 20 mm (average)

thickbase of cement mortar 1:6 (1 cement : 6 coarse sand) or L.M. 1:1.5 laid

41 over and jointed with gray cement slurry mixed with pigment to match the 63.00 976.72 Sq.Mt.

shade of slab including rubing & polishing etc. complete. (A) 25 mm thick.

Providing. & laying polished kota stone slab 25 mm th. in risers of steps, skirting

dedo and pillars laid on 10mm thick cement mortar 1 : 3 including edge

42 moulding laid on 10 mm th. Cement mortar 1:3 (1 cement : 3 coarse sand)and 14.00 1121.48 Sq.Mt.

jointed with gray cement slurry mixed with pigment to match the shade of slab

including rubbing & mirror polishing etc. complete

Providing and laying polished Kota stone slab flooring over 20mm (Average)

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-

43 Lime putty :1.5 - coarsesand) laid over and jointed with grey cement slurry 4.00 976.72 Sq.Mt.

mixed with pigment to match the shade of slab including rubbing and polishing

etc. complete. (A) 25mm thick

Providing and laying ceramic tiles 6 mm thick in flooring treads of steps and

44 landing laid on a bed of 12 mm. thick cement mortar 1:3 (1 cement : 3 coarse 7.00 957.63 Sq.Mt.

sand) finishing with flush pointing in white cement.

Providing and laying Coloured glazed tiles of the size 300 mm x 200 mm x 8 mm

/ 300 mm x 450 mm x 8 mm in Skirting, risers of steps and dedo on 10 mm.

45 thick cement plaster 1 : 3 (1 cement : 3 coarse sand) & Jointed with white 113.00 1417.36 Sq.Mt.

Providing and laying marble stone slab flooring over 20mm (average)base of

cement mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 -

46 coarse sand) laid and jointed with gray cement slurry including rubbing and 29.00 2134.79 Sq.Mt.

polishing complete. (A) Marble slab 25mm thicke.

Providing and fixing sandwiched granite and kota as Kitchen platform, pantry,

Basin counter etc. 20mm thick granite of approved color + 30mm Cm in 1:4 +

47 20mm kotah stone one side polished in one piece for kitchen / platform. The 5.00 4490.46 Sq.Mt.

joint shall be filled with.....

Providing and laying broken chine mosaic flooring using brick bats 25 to 100mm

size with 50 % of C.M. 1:4 ( 1 cement : 5 coarse sand ) admixed with water

proofing compound for terrace using 12 mm to 20 mm broken pieces of glazed

tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to

creme out upto surface using white cement including rounding off junctions and

extending them upto 15 cm along the wall,clearing with water and oxalic acid

etc. as directed.

Providing and fixing pre cast Rubber Dye inter locking concrete block 60 mm

thick with grade of concrete M200 pnumatic compressed by mechanically

49 pressed and as per approved design including 75 mm Sand layer for levelling 26.00 685.42 Sq.Mt.

and filling the joint with sand in proper line and level etc complete.

Providing 10 mm thick cement plaster in single coat on fair side bricks/concret

walls for interior plastering up to floor two level (G.F.) finished even and smooth

50 in cement mortar 1:4 (1 cement : 4 sand) including finishing with a floating coat 65.00 174.19 Sq.Mt.

a neat cement Slurry.

Providing 10 mm thick cement plaster in single coat on fair side bricks/concret

walls for interior plastering up to floor two level (F.F.) finished even and smooth

51 in cement mortar 1:4 (1 cement : 4 sand) including finishing with a floating coat 78.00 199.01 Sq.Mt.

a neat cement Slurry.

Providing 15 mm. thick cement plaster in single coat on fair side of

Brick/concrete walls for interior plastering upto floor two level and finished even

52 and smooth in : [ii] Cement mortar 1:4 [1 cement: 4 sand) 187.00 235.92 Sq.Mt.

Ground Floor….. with a floating coat of neat cement slurry

Providing 15 mm. thick cement plaster in single coat on fair side of

Brick/concrete walls for interior plastering upto floor two level and finished even

53 and smooth in : [ii] Cement mortar 1:4 [1 cement: 4 sand) 288.00 261.85 Sq.Mt.

Ground Floor….. with a floating coat of neat cement slurry

20mm.thick sand faced cement plaster (Gutaka Plaster) on walls upto height

10 meters above ground level consisting of 12mm. Thick backing coat of C:M

54 1:3 (1-cement:3-sand) and 8mm.thick finishing coat of C:M 1:1(1-cement:1- 335.00 329.29 Sq.Mt.

sand) etc.complete.

Providing & Making Drip patta to protect water from chajja to make in cement

55 plaster. 38.00 41.00 Rmt.

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly

56 brushing the surface free from mortar dropping and other foreign matter and 732.00 40.59 Sq.Mt.

sand papered smooth.

Distempering (Two coats) with Oil bound distemper of approved brand and

manufacture and of required shade on wall surface to give an even shade, over

and including a priming coat with distemper primer and Primer of approved

57 brand and manufacture after thoroughly brushing the surface free from mortar 732.00 71.90 Sq.Mt.

droppings and pther foreign matter and also including preparing the surface

even and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface (two

coats) to give an required shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose powdered materials etc

Providing and laying jointing in true line and level 15 mm dia U.P.V.C. pipe

(SCH - 40) for cold water including fittings make Prince

/Supreme/Astral/Finolex or equivalent as approved by Engineer In charge.

59 Pipe shall be fixed on the wall the help of clamp at every two meter C/C or shall 10.00 72.65 Rmt

be concelled as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost of all

Providing and laying jointing in true line and level 25 mm dia U.P.V.C. pipe

(SCH - 40) for cold water including fittings make Prince

/Supreme/Astral/Finolex or equivalent as approved by Engineer In charge.

60 Pipe shall be fixed on the wall the help of clamp at every two meter C/C or shall 25.00 91.84 Rmt

be concelled as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost of all

Providing and fixing C.P. brass towel rail comoplete with C.P. brass bracket fixed

61 to wooden plug with C.P. brass screws (B) 600 x 20 mm size 2.00 603.19 No.

Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass

62 mounted on 6 mm thick A.C. sheet or ply wood sheet and fixed to wooden plug 2.00 833.73 No.

with C.P. brass screw and washer

Providing and fixing screw down bib taps brass chromimum plated screw down

63 bib tap (I) 15 mm dia. 5.00 186.83 No.

Providing and fixing gun metal check or non return full way wheel valve.(C)

Providing erecting and fixing double coated Syntex or equivalent PVC. (ISI) mark

65 water tank of reqd capacity each with all necessary fittings & connection etc. 2000.00 3.95 Ltr

comp on terrace

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with special

66 falnge compression type fittings, wall clipsetc. including making good the wall 28.00 336.24 Rmt

ceiling and floor.(G)110 mm

Providing and laying jointing in true line and level 110 diameter U.P.V.C. (Type

B) conforming to IS 13592 - 1992 with one end plain and other end socketed

with rubbering & fitting conforming to ISI 14735 - 1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other with rubber

67 lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160mm 18.00 835.15 Rmt

diameter x 210 mm length x 196 mm heigh at every 2000 mm center to center

or shall be concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type

B) conforming to IS 13592-1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm

68 diametre x 210 mm length x 196 mm heigh at every 2000 mm center to center 20.00 831.22 Rmt

or shall be concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with adhesive

cement including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In Charge.

69 Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or 2.00 195.67 No.

shall be concealed as directed including necessary fittings etc. including testing

of pipe and joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or

70 shall be concealed as directed including necessary fittings etc. including testing 2.00 148.12 No.

of pipe and joints and fixing the same with adhesive solvent, including cost of all

Providing and fixing PVC SWR Nahni Trap IS 14735 for drain 75 mm diameter

with jali of the following nominal diameter of self cleaning design with C.I.

71 Scread down or hinged grating including the cost of cutting and making good 5.00 558.36 No.

Providing & fixing S.W. Gully trap with C.I grating brick masonary chamber &

water tight C.I cover with frame of 300mmx300mm size ( inside ) with standard

72 weight having square mouth trap having size of 150mmx100mm . 4.00 1246.92 No.

Const. of brick masonary chamber for under ground inspection chambers &

bends with brick having crushing strength not less than 35 Kg. / cm² in C.M. 1:5

precast R.C.C. top slabs with 1:2:4 (1-cement, 2-course sand : 4-graded stone

73 aggregate 20 mm nominal size) foundation concrete 1:5:10 in side plaster 15 2.00 2932.93 No.

mm thick with C.M. 1:3 finished smooth with floating coat of neat cement on

walls & bed concrete, inside dimension (i) 455 x 610 mm and 450 mm deep for

single pipe line.

Providing and fixing wash down water closet (European type, W.c. pan) with

integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1 :

74 1 (1 cement: 1 fine sand) with coloured plastic seat cover with C.P. brass hinges 2.00 3648.13 No.

and ruber buffers including cutting holes in wall and making good the same etc

Providing and fixing flat back wash basin 550 mm x 400 mm size of

HINDWARE,SONA,CERA of first grade, white in colour with single hole for pillar

trap with CI or MS brackets painted with including cutting holes and making

good the same including providng and fixing CP brass waste coupline 32mm dia

75 including providing and fixing MI washer union 32mm dia including providing 2.00 2053.48 No.

and fixing 15mm dia pillar tap capsten head screw down high pressure with

screws, shanks and back nuts including providing and fixing waste pipe 15mm x

600mm PVC inlet connection, 15mm brass screw down stop tap with necessary

fittings etc comp.

Providing sock pit of specific volumn of 13.00 cum volumn including excavating

pit upto 5.0mt depth, on base of P.C.C. honey comb brick masonary work

0.23mt thick upto 0.30mt below G.L. One 6"th copping is provided (including

reinforcement) on parifare of brick masonary work. Dry brick masonary work is

provided 0.30mt above G.L. At Top 0.15mt thick R.C.C. 1:2:4 Slab is provided,

including Cast iorn cover 455mm x 610mm Size and out side 15mm smooth

plaster is provided on expose surface. Providing 2.00mt Internal Dia.

Construction Septic Tank with R.C.C. slab in C.C. 1 : 2 : 4 including excavating

filling bed concrete C.C. 1 : 4 : 8 , 0.15 mt. thick buffer wall with Outer periferial

77 brick masonary wall 0.23 m thick in C m 1 : 6 Including finishing with cement 1.00 35198.50 No.

plaster 15 mm thick in C M 1 : 4 With C I main hall cover as per details drawing

size 2.50x 1.25 x 1.50 Mt.

Providing and fixing post and pipe railing as per detailed drawing including

coats of painting to steel works complete

Applying general insecticide pest control treatment to floors, cupboards etc.

including labour material etc complete. Using heptachloride 20 EC. As per

6113 pests Consentration Weight 0.50 percent is recommended one litre

79 chemical emulsion dillute with 39 litre of water will give. Total dillute 56.00 40.89 Sqmt

concrentration will be 40 litre inclusive of one litre chemical emulsion application

0.5 litre chemical /Sqmt. of surface is recommended as per I.S.

Carring out plinth treatment to post construction/existing structure by spraying

chemical solution for termite control treatment including labour and material

consistment with I.S.I Specification. Using Chlordene and chiropurfiles 20 EC As

80 per 6113 peret - II Consentration Weight one percent is recommended i.e. one 23.30 34.36 Sqmt

litre 20 EC chemical emulsion with 19 litre give 1 % concrentration inclusive of

one litre chemical emulsion application at the rate of 5 litre chemical / Sq.mt of

surface is recommended as per I.S.

Carrying out plinth treatment to post construction / existing structure by

spraying chemical solution for termite control treatment including labour and

81 material consistent with I.S.I. specification….. 173.00 81.20 Sq.Mt.

Supplying, Carting and Spreading of graded stone aggregate of following sizes

82 (for W.B.M Road ) (2) Hand broken stone aggregates 40mm to 63mm Size. For 10.00 1340.27 Cu.Mt.

Supply,Spreading binding or road crust filling the gaps in metal and levelling to

83 gradient and camber as directed. (i) Quarry dust. 10.00 1234.22 Cu.Mt.

Providing and drilling of 300mm pilot bore hole in alluvial Strata by directed

rotary rig & remaining bling lowering housing casing of print bore hole 450mm

dia including assembling lowering housing casing strainer pipe casing pipe of

84 200 mm dia screens pipe of 20mm dia with a = 4mm to 6mm best quality of 30.00 3419.86 Rmt

sevalia gravel lowering the submersible mortor of 2HP along with flat PVC cable

panel board of 3HP single phase 230 volts etc.

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth continuity of following

85 type, erected on PVC / Metallic/Wooden box, single mounting base frame 35.00 485.81 Pt.

covered with textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete. Cat.III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected with 6A Modular type switch

and hum free EME four or more step type electronic fan regulator with

separately mounted and accessories with earth continuity of following type

86 erected on PVC / Metallic/Wooden box, single mounting base frame covered with 7.00 674.68 Pt.

textured/metallic/white front plate modules erected on / in wall / ceiling as per

pipe erected. with necessary ceiling rose / H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete. Cat.III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to

10 mtr length, in below type of pipe erected complete with Modular type switch

& 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate

87 front plate modules erected on / in wall / ceiling as per pipe erected with 5.00 510.05 Pt.

following type of accessories.[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm

Cu. Wire from nearby switchboard/mcb db board (f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling complete. Cat.III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin

88 socket erected on PVC / Metallic/Wooden box, single mounting base frame 12.00 257.55 Pt.

covered with textured / metallic/white front plate modules erected on / in wall

/ ceiling with following type accessories Cat.III

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

89 metallic/white front plate , modules erected with necessary connections as per 7.00 180.79 Ea.

site situation directed by Engineer In charge.(9) 16 Amp. SP one way switch.

90 (10) 6/16Amp. Universal socket 7.00 199.98 Ea.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected

91 concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS 170.00 82.82 Mtr.

PVC insulated stranded wire of green colour for earth continuity of following

size. (A) with medium class Rigid PVC pipe and accessories. (b) 2 wire 2.5 sq.

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on

92 wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded 60.00 112.11 Mtr.

wire of green colour for earth continuity of following size (A) with medium class

Rigid PVC pipe and accessories. (a) 2 wire 4 sq.mm

93 Decorative call bell Ting-tong box type 250 volts complete erected 2.00 71.71 Ea.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V,Power Factor more than 0.9, THD < 15 %,

CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED LED driver

efficiency>85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA /

SEOUL/Bridgelux make LED used for luminaire. ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the

ranges shown.) (A) Tube Light with integral driver (c) 16-20 Watts, Surge -

2KV,IP-20, 4 feet. Cat.III

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink extruded aluminium

with diffuser and Polycarbonate optics/ lenses with company mark/name

engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD <

%, CCT 3000 K to 5700K, Uniformity ratio >0.45, Luminaire efficacy>

95 lumens/watt . LED driver efficiency > 85 %.CREE / OSRAM / PHILIPS Lumileds / 4.00 3345.12 Ea.

NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. ( fittings

required LM-79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A) Street Light (IP-65), Surge

protection -4KV integral and Light must have 440VAC line supply with over-

voltage protection. (i) above 36 to 48 watts. Cat.III

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

96 operate on 240 V A.C. system and having breaking capacity 10 KA to be erected 20.00 113.23 Ea.

in existing box. confirming to IS 8828/1996 with ISI Mark

Providing & erecting 240 V MCB double pole switch for motor & inductive load

97 (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box 3.00 330.27 Ea.

having following capacity (B) 40 Amp. Cat.III

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve)

98 having 10 KA breaking capacity & confirms to IS : 8828 in existing box having 3.00 295.93 Ea.

following capacity. (B) 40 Amp. Cat.III

Providing and erecting Sheet Steel powder coated MCB distribution board - flush

/ surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate

99 nos. of MCBs.(The DBs should be used of same company of MCB to be used) 2.00 1492.78 Ea.

suitable for (A) single phase incoming and horizontal single phase outgoing (b)

sheet steel double door (IP-43) (iv)12 way

providing and erecting Approved make ELCBs / RCCBs conforming to IS:

and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA

100 and suitable for operation on single phase 240 V,50Hz. having characteristic of 2.00 2235.13 Nos

quick action & tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as directed. (ii)

40Amps. DP Cat.III

101 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 5.00 794.87 Kg.

Supplying & erecting earth pit of minimum bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made

of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having

80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy duty cover.(approved

make OEM has to submit test certificate) & having back filling compound of (B)

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable to retain

moisture for long time Necessary test report must be submitted. (a) For

Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand /

103 Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps 100.00 140.39 Mtr.

or in existing trench / pipe of following size of cables. (c) 4 core 10 Sq. mm

Making trench in soft soil of suitable width of 90 cm deep for laying cable or

104 locating the fault all over the run and back filling the same and making the 40.00 74.74 Mtr.

surface as normal ground.

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm

105 sweep complete having 3blades with aluminium blades with , canopy & 30 cm. 7.00 1948.29 Ea.

down rod erected with earthing.(Make shall be approved by Engineer in charge)

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the

106 RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S. 7.00 108.07 Ea.

box / Heavy Duty PVC box complete erected concealed in Ceiling with necessary

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box.

Supplying & erecting approved make SMC press moulded composite FRP. loop-

in, loop-out approx. 2mm thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged doors as per requirement

108 having locking arrangements with mounting clamp with nuts, bolts & washers 4.00 898.90 Ea.

suitable for erection on pole with cable clamps& earth bolt of following size of

box. (a) 300mm x 200mm x 100mm [deep]

Supplying and erecting Street light pole bracket comprising main B Class MS

pipe of 4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve

tubing of approx. 45cms.length and suitable for 76.5mm/80mm/require size of

pole top having nuts and bolts for fixing the brackets and having spread of

109 mtr. Length with 110 deg.with vertical plane and suitable welded stiffener 4.00 450.46 Ea.

reducer and nipple with check nut complete painted with one coat.of Red oxide /

PU base primer and two coats of Aluminium / PU paint. paint with following nos

of arms. [A] Single Arm bracket 0.5 Mtr

Providing Water proof straight Joint in PVC insulated flat flexible copper cable by

110 using insulating material, water proofing material, & making the joint complete. 2.00 189.88 Nos.

Supplying and erecting Direct-On-Line Starter with 18A. Rating contactor and

with 3.5 Amp. 18A range directly operated in totally insulated elegant enclosure

111 for single phase operation up to 3 HP as per IS 13947 complete erected on P.W. 1.00 2121.81 Nos.

Block with necessary connection.

Supplying of single phase submersible pump set suitable for 100 mm size or

more dia bore well having motor capacity and discharge as under with necessary

112 panel box © Motor rating 2 HP (17 stage) pump having capacity of 106 LPM at 1.00 18386.04 Nos.

40 mtr head suitable for 32 mm dia. delivery pipe Cat.-II

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible

113 Submersible copper cable approved make of following Size. (B) 3 core x 2.5 150.00 104.03 Mtr.

Miscellaneous contingences for any work not specified in tender or any excess in

114 specified items if required during execution of work as per instruction opf EIC. 1.00 101000.00 Job

(Rates shall be decided from lowest of 3 quotations and shall be approved by

EIC before carrying out work).

consultancy 3% if required Carrying out structural design including required

testing and getting BUC approval from govt. /local authority including

115 preparation plan and submision of proposal to govt. /local authority for getting 1.00 Job

permission etc. complete as per EIC . (@3% of total cost)

Total Amount In Rs. :-

Total Amount In Rs. :-

Add 18% CGST Rs.:-

Total Amount in Rs. With GST : -

Total Amount in Rs. With GST : -

"All royalties, toll tax, local tax, development charges, and any other taxes etc., in respect of this contract and also any statutory variation in future

towards above mentioned taxes & any other taxes if levied in future by statutory authority applicable to the this contract shall be payable by the con-

tractor and DGVCL will not entertain any claim whatsoever in this respect.

The Contractor has to pay 1% Labour Welfare Cess of Bill amount to the concern Government Department.

The contractor shall also produce the receipt of payment of 1% welfare cess from the respective Govt., Department.

The proof of payment made by the contractor to the appropriate department shall be submitted to DGVCL, failing which appropriate amount shall be

withheld on getting information/instruction from the concerned department.

Addl. Chief Engineer (P)