Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹3.1 LAccepted-AOC | 1 | Accepted-AOC LOW RATE | |
| 2 | 2₹3.1 L+₹1,676.48 (0.54%)Rejected-Finance | 2 | Rejected-Finance HIGH RATE | |
| 3 | 3₹3.2 L+₹4,029.57 (1.29%)Rejected-Finance | 3 | Rejected-Finance HIGH RATE |
| Sl No | Description | Qty | Unit | K V PRADEESH L1 | KCN CONSTRUCTION LLP L3 | Ajith E P L2 |
|---|---|---|---|---|---|---|
| 1.00PARKING SHED | ||||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 0.23 | cum | 307 ₹69.08 Lowest | 312.91 ₹70.4 | 310.56 ₹69.88 |
| 1.00 | 4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.23 | cum | 6,652.92 ₹1,496.91 Lowest | 7,454.01 ₹1,677.15 | 7,398 ₹1,664.55 |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 479.32 | kg | 197.09 ₹94,469.97 Lowest | 200.88 ₹96,286.61 | 199.4 ₹95,577.21 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 385.05 | kg | 159.64 ₹61,469.38 Lowest | 162.71 ₹62,651.49 | 161.5 ₹62,185.58 |
| 1.00 | OD442956/2025-2026:Providing and fixing Alu Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge)
0.40 mm (+0.05%), thickness . Sheet should have protective guard film of 25 microns minimum to avoid scratches
during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The
sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch
in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size
and shape wherever required. (MOD 12.50 of DSR ) | 95.76 | sqm | 492.4 ₹47,152.22 Lowest | 501.87 ₹48,059.07 | 498.1 ₹47,698.06 |
| 1.01 | OD442957/2025-2026:Providing and fixing 150 mm half cut PVC pipe over flat iron brackets 20x5 mm size | 15.2 | metre | 400 ₹6,080 | 217.14 ₹3,300.53 | 215.5 ₹3,275.6 Lowest |
| 1.01 | 50.18.9.8.2:Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching and refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 4 Kgf/cm2 | 6 | metre | 289.31 ₹1,735.86 Lowest | 322.98 ₹1,937.88 | 320.55 ₹1,923.3 |
| 2.00NAME BOARD | ||||||
| 2.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 12.94 | kg | 160.63 ₹2,078.55 Lowest | 162.71 ₹2,105.47 | 161.5 ₹2,089.81 |
Tender Value
₹3.4 L
EMD Value
₹8,470
Closing Date
3 Mar 2026, 12:00 pmClosed
ASSISTANT ENGINEER
KURUMATHUR GP
PRO317/25-26 CONSTRUCTION OF PARKING SHED FOR BAVUPARAMBA PHC
2026_LSGD_839632_1
AE/KMTR/TN/09/2025-26
Open Tender
Civil Works - Buildings
Item Rate
180 days
KURUMATHUR GP
Please refer Tender documents.
9 documents required · 9 mandatory
₹750
Yes
₹8,470
Yes
7 Jul 2026
24 Feb 2026
4 Mar 2026
24 Feb 2026
3 Mar 2026
24 Feb 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1PARKING SHED | |||||
| 1.001 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | - | cum | - | - |
| 1.002 | 4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
| 1.003 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 0.6 | kg | - | - |
| 1.004 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - |
| 1.005 | OD442956/2025-2026:Providing and fixing Alu Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge)
0.40 mm (+0.05%), thickness . Sheet should have protective guard film of 25 microns minimum to avoid scratches
during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The
sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch
in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size
and shape wherever required. (MOD 12.50 of DSR ) | - | sqm | - | - |
| 1.006 | OD442957/2025-2026:Providing and fixing 150 mm half cut PVC pipe over flat iron brackets 20x5 mm size | 1 | metre | - | - |
| 1.007 | 50.18.9.8.2:Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching and refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 4 Kgf/cm2 | - | metre | - | - |
| 2NAME BOARD | |||||
| 2.001 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1 | kg | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1415111.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.58 MB
BOQ_1415111.xls
BOQ • 0.31 MB
viewsbd.pdf
Tender Documents • 1.81 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .