REP REPLACEMENT OF FLOORING, DADO, PLINTH PROTECTION AND CERTAIN MISC BR WORK AT DAD MD AND OTM ACCN AND REP TO WALL FENCING GATE AT PRC, MES, STN HQ, TEMPLE LANE AT RAMGARH CANTT

Amount

Dismantling stone slabs of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, and removal of debries from site complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20mm -25 mm thick of size not less than 575 mm X 575 mm, over laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing & polishing over & including 20 mm thick screed bed in CM (1:6) complete all as specifed & directed.

M&L for machine cut kota stone slab in skirtings,riser of steps ,dado & pillar 10 to 12 mm thick laid and jointed with grey cement slurry pointed with cloured cement to match the shade of the slab including grinding rubbing & polishing over 10 mm thick backing coat in CM (1:4) etc complete all as specifed & directed.

Grinding & mirror polishing of existing kota stone/ Terrazo /granite flooring, etc including treating the surface with beeswax polish where ever required to give high glossy finish complete all as directed by Engr-in-charge

M&L for 18 mm to 20 mm thick granite slab (or any type) table rubbed and pre mirror polished in steps,jambs, pillar,window cill,cooking platforms and like in cement mortar1:4, set & jointed in neat cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over & including 15 mm thick rendering in cement mortar(1:4) etc including dismantling of exsting slab complete all as specifed and as directed.

M & L for 25 mm thick (measured solid),providing precast cement concrete 1:2:4 ,type B-0 ( using 12.5 mm graded crushed stone aggregate ) as in louvres and jallies, including all mould- ings but excluding frame including setting in cement mortar 1:4 including necessary formwork & dismantling of existing one etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the all rubbish off from the premises complete all as specified and directed.

M&L for Vetrified ceramic coloured floor (dark shade ) tiles 10 mm thick (Square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc set & jointed in neat cement slurry and pointed in cloured cement to match the shade of tiles, over & including 15 mm thick screed bed in cement mortar (1:6) etc complete all as specified & directed.

M & L glazed ceramic coloured tiles of size 300 mm x 450 mm x7mm thick/350 mm x 250 mm x7mm thick ,as in vertical surface such as dado/skirting etc ,set and jointed in neat cement slurry and pointed in colour cement to match the tiles, over & including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M & L non skid coloured ceramic tiles 7 mm to 8 mm thick (sqaure/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc.,laid over and including 15mm thick screed bed in cement mortar (1:6) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.

M & L non skid coloured ceramic tiles 7 mm to 8 mm thick (sqaure/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc.,laid over and including 15mm thick screed bed in cement mortar (1:6) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.

Demolition of brick work of any description and in any position built in cement or cement lime mortar including all quoins, arches, pillars, including segregation of serviceable bricks for reuse & removal of rubbish out off from site etc complete all as specified and directed.

M&L for Brick work using Sub class "B" bricks old size , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 as in drain ,man holes etc complete all as specified & directed.

M&L for Brick work using Sub class "B" bricks old size , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified & directed.

M&L for Brick work but except bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 etc complete all as specified & directed. Note: old serviceable brick as retrieved from item No.12 of BOQ here-in before.

M&L for half Brick thick brick work using Sub class "B" bricks old size , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 etc complete all as specified & directed.

M&L for rendering 10 mm thick on other than fair face of brick masonry/concrete surface etc., in cement mortar 1:4, surface finished even & smooth without using extra cement complete all as specified and directed.

Taking down cement plaster on brick wall or concrete surface etc including raking out joints hacking for key scrubbing down with water etc & removing the debris from the premises upto 500 m from the MOD land complete all as specified and directed

M&L for rendering 15 mm thick on other than fair face of brick masonry/concrete surface etc., in cement mortar 1:4, surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on fair face of brick masonry/concrete surface etc., in cement mortar 1:6, surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying 2.0 mm thick wall care putty in two layers to make entire surface free from undulations complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

M&L for preparation of newly plaster surface of wall and applying two coats of cement base paint over a coat of alkali resistant primer including necessary scaffolding complete all as specified & as directed.

Demolition of plain cement concrete(un-reinforced ) in any description and removal of rubbish off from site complete all as directed by Engr-in-Charge.

M & L for 75 mm thick plain cement concrete (1:3:6) mix, type C-1 (using 20mm graded crushed stone aggregate ) as in plinth protection, finishing the surfaces even and fair without using extra cement, including 10 mm wide, 75mm deep joints made at 3.00 m in length and filled with bitumen 85/25 grade and sand in the ratio 1:3 including necessary form work , complete all as specified and directed.

M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base of flooring & mass concrete etc complete all as specified and directed.

M & L for 25 mm thick PCC (1:2:4), type B - 1 (using 20 mm graded crushed stone aggregate) as in sub base,levelling course of floor finishing,even & smooth using extra cement complete all as specified and directed.

M&L for providing pre-cast reinforced cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area not exceeding 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops including necessary form work complete all as specified & directed.

M&L for 60 mm thick factory made machine pressed pre-cast concrete coloured interlocking paver block of approved shade,laid in design & pattern as in footpath, light traffic parking etc, made by table vibratory method using PU mould of any shape and size conforming to IS-15658-2006 of M-35 grade laid over & including 50mm thick compacted bed over fine sand, compacting and proper embedding/ laying by vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for 100 mm thick plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in flooring/hard standing etc complete all as specified and directed.

Demolition of reinforced cement concrete as in chullah hoods, shelves, cover slab and platform, etc,and removal of rubbish off from site complete all as directed by Engineer-in-Charge.

M&L for precast /cast-in-situ reinforced cement concrete 1:2:4 ,type B-1 (using 20 mm graded crushed stone aggregate) as in kitchen platform, shelves ,man hole cover slab/ drain cover slab etc. including necessary formwork complete all as specified and directed. Note : Reinforcement will be measured & paid seperately under respective item of BOQ.

M&L for mild steel TMT bars 10 mm dia and over grade Fe -500 , as in reinforcement ,cut to length, bent to shape required, including cranking bending spirally for hooping for column,, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete etc all as specified and directed.

M&L for reinforced cement concrete( RCC )1:1.50:3 type A-1 (using 20 mm graded crushed stone aggregates) as in foundation, footing, foundation beams,plinth beams, bases for columns,pedestal, under reamed piles, mass concrete, etc complete all as specified & directed. (Note: Formwork and reinforcement shall be measured and paid seperately under respective items of BOQ).

M&L for use & waste of formwork to sides of rough finished surfaces of concrete foundations, footings, bases of columns, sides and sofits (if any) of foundations & plinths beams and similar work flat etc complete all as specified & directed.

M&L for mild steel TMT bars 08 mm dia grade Fe -500 , as in reinforcement ,cut to length, bent to shape required, including cranking bending spirally for hooping for column,, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete etc all as specified and directed.

M&L for mild steel TMT bar 8mm dia as in stirrups, cut to length bent to shape required including cranking bending spirally for hooping for column, hooking end binding with binding wire and including mild steel wire(annealed) not less than 0.9mm dia as in stirrups, complete all as specified & directed by Engineer in Charge.

Taking down chowkhats or frames with shutter (without taking off shutter from the frames) of any description not exceeding 1.5 Sqm each,including builders hardware etc & making good disturbed surface of wall with CM 1:3 complete all as specified and directed

Taking down chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frames) including builders hardware etc & making good disturbed surface of wall with CM 1:3 complete all as specified and directed

Taking down shutters of any description not exceeding 1.0 Sq m each and refixing in the same opening /other opening as directed by Engineer-in-Charge after necessary easing, adjustment etc., complete all as specified and directed by Engineer-in-Charge .

Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.0 Sq m each and refixing in the same opening /other opening as directed by Engineer-in-Charge after necessary easing, adjustment etc., complete all as specified and directed by Engineer-in-Charge .

S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tubes suppyling & fixing in opening as per specification & drawing complete all as spcefied and directed by Engineer-in-Charge.

S & F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. mild steel framed shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail &bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS framed welded/sealed to stiles & rails with suitable PVC sheet beading & joined together with solvent cement complete all as fixing in the frame at site as per specification and drawing complete all as specified and as directed.

S & F for steel windows or ventilators,fixed type with glazing/glazed bars complete including prepartion of new or previously untreated steel surface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified & directed.

M & L for 3mm thick plain sheet glass ordinary quality and glazing with oil putty not exceeding 0.50 Sqm in each pane,complete all as specified and as directed by Engineer-in-Charge .

M&L for framed work such as grills,gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railing; framework of water tanks and similar work conforming to Fe 290- Gde E -165 & for portions framed and hung as gates, including pintle hinges, stops,hand-made sliding bolts, etc.complete all as specified and as directed

M&L for prepartion of new or previously untreated steel surface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

M&L for prepartion of old painted of steel surface of any description , not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint (ordinary tint) any colour on old steel painted surface complete all as specified & directed.

M&L for preparation of newely plastered surfaces of wall and applying three coats of white wash on wall surface complete all as specified & directed.

M&L for preparation of old painted of wooden surface of any description , not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint (ordinary tint) any colour on old wooden painted surface complete all as specified & directed.

S & F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed complete all as specified & directed.

S & F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long complete all as specified & directed.

S&F 300 mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified & directed.

S&F mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

S & F in repair for aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete etc all as specified & directed.

S & F 150 mm (overall length of cover plate) floor door stopper with rubber shoes aluminium alloy body and tongue, anodised ,with hard drawn steel spring,fixed in floor complete all as specified and directed.

S & F Aluminium anodised handles of extruded section and fixed 150 mm long complete all as specified & directed.

S&F WC squatting pan " Orissa Pattern" of size 580 mm X 440 mm white with integral foot rest including cast iron "P" or "S" trap, front or back inlet and making connection to trap & to flushing cistern complete including taking down existing pan & making good disturbed surface complete all as specified & directed.

S&F in repair vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), fixing seat cover including connection to drain (or outgoing pipe, and to flushing pipe & antisyphonage pipe etc with plastic water closet seat closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S & F in repair vitreous China wash basin, any colour, flat back size 580 mm X 450 mm including 32mm brass chromium plated waste coupling , 32 mm bore PVC waste pipe, chromium plated Grating including cutting for & pinning in ends of bracket or errecting bracket & PCC 1:2:4 ,type B-1(using 20 mm graded crushed stone aggregate) for embedding brackets & making good disturbed surface with CM 1:3 complete all as specified and directed.

M&L for cleaning of PVC water storage tank of capacity 1000 ltr on existing bldgs with disconnecting of inlet and outlet pipe ,cleaning with brush/cotton cloth,removing of silt,dirt ,vegetation etc by applying bleaching powder ,lime and washing of water tank and re-connecting /re-fixing in same position complete all as per specified and directed by Engr-in-charge.

M&L for cleaning of PVC water storage tank of capacity 500 ltr on existing bldgs with disconnecting of inlet and outlet pipe ,cleaning with brush/cotton cloth,removing of silt,dirt ,vegetation etc by applying bleaching powder ,lime and washing of water tank and re-connecting /re-fixing in same position complete all as per specified and directed by Engr-in-charge.

S&F rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed type), triple layer construction, ISI marked, hoisted and fixed in position including 20 mm bore GI nipple and 25 mm bore ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) including taking down of existing tank complete all as specified and directed.

S&F rotational moulded polythene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed type), triple layer construction, ISI marked, hoisted and fixed in position including 20 mm bore GI nipple and 25 mm bore ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) including taking down of existing tank complete all as specified and directed.

Taking up or down steel tubing and connections of 15 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed.

Taking up or down steel tubing and connections of 20 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed.

Taking up or down steel tubing and connections of 25 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 15 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors including cutting chases for brick walls and making good the surface in cement mortar 1:3 complete all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 20 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors including cutting chases for brick walls and making good the surface in cement mortar 1:3 complete all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 25 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors including cutting chases for brick walls and making good the surface in cement mortar 1:3 complete all as specified & directed.

Refixing for 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)including all fitting as socket, elbow, nipple,union etc complete all as specified and directed .Note :G I Pipe obtained from item No.68 here-in -before.

Refixing for 20 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)including all fitting as socket, elbow, nipple,union etc complete all as specified and directed .Note :G I Pipe obtained from item No.69 here-in -before.

Refixing for 25 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)including all fitting as socket, elbow, nipple,union etc complete all as specified and directed .Note :G I Pipe obtained from item No.70 here-in -before.

S & F in repair 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repair 15 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair stop valve/cock 15mm bore chromium plated fancy type with long shank fancy type cast copper alloy, screwed down high pressure with crutch or butterfly handlt, screwed both ends for iron pipe or for brass ferrule fixed in wall etc complete all as specified and directed (Make- Shakti Cat Part No API-6106 or equivalent Cat Part No. of any make as per appendix 'A' to P.S as approved by GE).

S & F in repair pillar taps long body chromium plated, cast copper alloy with capstan head, chromium plated, screwed down with or without lettered 'Hot' or 'Cold' with long screw shanks and fly nuts, screwed for iron pipe and fixed for 15 mm bore complete all as specified & directed (Make- Shakti Cat Part No API-6108 or equivalent Cat Part No. of any make as per appendix 'A' to P.S as approved by GE).

S&F in repair stop valve/cock 15mm bore chromium plated fancy type with long shank fancy type cast copper alloy, screwed down high pressure, screwed both ends for iron pipe or for brass ferrule fixed concealed in wall etc complete all as specified and directed. (Make- Shakti Cat Part No API-6109 or equivalent Cat Part No. of any make as per appendix 'A' to P.S as approved by GE).

S & F 15mm bore bib taps ( weight not less than 400 gm) cast copper alloy, chromium plated fancy type(half/ quarter turn, with mini capstain headhandle screwed down, screwed for iron pipe and fixed to 15mm bore ipe after taking down of lod bib tap complete all as specified and directed (Make- Shakti Cat Part No API-6103 or equivalent Cat Part No. of any make as per appendix 'A' to P.S as approved by GE).

S & F in repair stainless steel kitchen sinks with drainage board for kitchen made of stainless steel 1.00 mm thick sheet with plugs, washers & waste coupling and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 1325 mm X 460 mm with double bowl of size 410 mm X 330 mm X 160 mm including 40 mm bore PVC flexible waste/flush pipe 800mm long with socket fixed with sink brass waste coupling complete all as specified and directed.

S & F in repair waste fittings, brass, chromium plated for glazed ware sinks, basins etc. with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixed waste coupling 40mm and waste pipe 40mm dia for sink etc complete all as specified and directed.

S & F in repair 15mm dia Sink tap cast copper ally chromium plated, fancy type (Half/Quarter turn with Swan neck) with mini capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed. ( Make -Shakti Cat Part No API-6107 or Equivalent Cat Part No of any approved Make-as per Appendix 'A' to PS)

S&F in repair for PVC connection 15 mm dia size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair towel rail brass chromium plated towel rail , 20 mm dia ,D-type 600 mm long between flanges fixed with and including chromium plated brass screw & wooden /plastic cleats complete set all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf, 15cm wide with chromium plated bracket guard and railing 60cm long complete set complete all as specified and directed.

S&F in repair chromium plated (CP) soap tray /dish of size 160 mm x 160 mm x 90mm fixed with brass screws complete all as specified and directed.

S & F in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float and handle, PVC flush pipe 32 mm bore & PVC connection 15 mm bore 450 mm long with PTMT nuts and brackets complete set & making good disturbed surface with CM 1:3 complete all as specified and directed.

S&F in repairs mild steel Peg set fancy type of six,hat and coat hooks, solid body, not less than 300 mm long complete all as specified and directed.

S&F in repair for 110 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor etc.,complete all as specified and directed.

S&F in repair for 75 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor etc., complete all as specified and directed.

S&F in repair PVC (SWR) junction single (single-T) equal or unequal 110mm bore provided with access door complete all as specified & directed.

S&F in repair PVC (SWR) junction single (single-T) equal or unequal 75 mm bore provided with access door complete all as specified & directed.

S & F in repair for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement with chromium plated grating with or without hole complete all as specified and directed.

S & F in repair Grating doom 100mm dia of PTMT (minimum weight 25gms) complete all as specified and directed by Engineer-in- Charge.

S&F in repair for 110 mm bore PVC(SWR) bends any radius with rubber ring joints complete all as specified and directed.

S&F in repair for 75 mm bore PVC(SWR) bends any radius with rubber ring joints complete all as specified and directed.

Dismantling post or struts (wood,steel or RCC) any position,including taking out embedded portion and making good disturbed ground, post embedded in concrete, brick work, masonry etc & removal of rubbish out off from site etc complete all as specified and directed. (Note- Only embedded portion of post or strut will be measured and paid)

Taking down chowkhats or frames with shutter (without taking off shutter from the frames) size not exceeding 1.5 Sqm each, complete all as specified and directed by Engr-in-charge.

Excavation in post holes (or similar holes) not exceeding 0.5 cum, getting out, & removing surplus soil material to a distance not exceeding 50 mtr & making good surface complete all as specified & directed.

M&L for plain cement concrete 1:3:6 ,type C-2 (using 40 mm graded crushed stone aggregate) as in foundations,filling & mass concrete for fencing posts, foundation of pole ,struts & stay assembly etc complete all as specified and directed.

M&L for mild steel flat iron etc work conforming to Fe.290.Gde-E-165 as in fencing posts & struts including cutting tops to shape as required, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) and embedding in concrete complete all as specified & directed.

Dismantling of chain link fencing wire mesh any size or type complete all as specified & directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including fixing of flat iron ,mild steel round bars & mild steel screws bolt and provision of binding wire complete all as specified & directed.

Supply only 3.15 mm dia GI wire 75 mm x 75 mm mesh (chain link fencing) made up to mattresses or cages lapped wired and laid in position including closing and tied with posts properly complete all as specified & directed..(NOTE:Unit weight of chain link fencing will be measured and paid as per BOO)

S & F angle iron as in support/struts/post/hanging for fencing including cutting to shape as directed including suitable size of hole for nut bolt/screw & washer & driling rivertin etc., and similar work conforming to Fe-290 Gde-E-165 complete all as specified & directed.

S&F mild steel round bars 10 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips conforming to Fe-410 W complete all as specified & directed.

Dismantling structural steel work of including doors ,gates but excluding framed trusses any description complete all as specified and as directed.

S&F in repairs Galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc all as specified and Directed (each line wire to be measured) complete all as specified & directed.

S&F for framed work as in ornament or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing conforming to Fe-410 W Gde-E-250 quality B complete all as specified & directed.

S & F 1.00 mm thick mild steel, plain, black sheet in covering to door shutters, covering to door chowkhats (frames) cut to size edges beaded if directed, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc., as required, complete all as specified and as directed.

M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling the existing plain or corrugated sheets of any gauge/any thickness complete all as specified and directed.

M&L plain cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) in for inserting hold fast of doors & window & similar work etc.including necessary form work complete all as specified and directed

M&L for plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in levelling course,kerb/ benching/ coping /window cill etc including weathering, slightly rounded or chamfered angle and throating including use & waste of necessary form work etc complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall including cornices, by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including filling the cracks and depressions with putty and applying one coat of white wash on wall surface at upto 10 Mtr height complete all as specified and directed. Note :Quoted rate shall be deemed to be included for work in building/structure( like stair case, mummty ,Over head tank (OHT), sump etc of any height including necessary scaffolding )

M&L for preparation of old decorated surfaces of wall including cornices, by brooming down or steel wire brushing to remove dust, dirt and loose scales and other foreign material, scrapping down, smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including filling the cracks and depressions with putty and applying one coat of cement base paint on wall surface at upto 10 Mtr height by applying by pump roller applicator complete all as specified and directed.

M & L for mild steel screw bolt (machine made 11mm to 15mm dia of neck with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fited with washers and one hexagonal or square nut, length of bolt not exceeding 5cm long complete all as specified and directed.

M & L for preparation of newly/untreated surface of wood of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M/s Popatlal A Rathod (BID ID -3337086)

M/S SHAMBHU SHARAN SINGH (BID ID -3339842)

Modernage Constructions Pvt. Ltd. (BID ID -3336006)

BEE ROMEN (BID ID -3337899)