PETTY REPAIRS/ DAY TO DAY MAINT WORK INCL REP/REPLACEMENT TO JOINARY, PLUMBING SANITARING , ROOF, PLASTERING AND OTHER ALLIED CONNECTED BLDG REPAIR WORKS IN AREA - IV AND OTHER AREA MD ACCN OF AGE B/R-II GE (NORTH) AMB

Amount

M & L for taking down cement of cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge

M&L for 15mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete surfaces of any description finished even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge

M&L for 15mm thick rendering in cement mortar 1:4 on other than fair faces brick or concrete surfaces of any description finished even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge

M&L for rendring 10mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces on ceiling complete all as specified and as directed by the Engineer-in charge.

M&L for preparing of new surface of walls, plastered or unplastered applying two oil bound distemper with roller over a coat of primer/chalk whiting complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparing new surface of ceiling, plastered or unplastered and three coat of white washing on undecorated surface of ceiling complete all as specified and as directed by the Engineer-in-Charge

M&L for preparing of new surface of walls, plastered or unplastered two coat of cement base paint, white or tinted complete all as specified and as directed by the Engineer-in-Charge

Demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified and as directed by the Engineer-in-Charge.

M & L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6mmean radius in built in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and as directed by the Engineer-in-Charge

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and as directed by the Engineer-in-Charge

Taking down shutters of any description exc 1 sq. m and not exc 2 sq. m each complete all as specified and as directed by the Engineer-in-Charge

Taking down shutters of any description exc 2 sq. m each complete all as specified and as directed by the Engineer-in-Charge

S & F steel window ( box type ) glazed and gauged using ERW hollow 'P' section double frame jointed internally with 25x3mm complete as per TD- 219(c) sheet 1/3 to 3/3 with side hung shutter including butt binges, steel handles and steel peg stay, towel bolt completes with glazing bars dovetailed or welded, including two coat of synthetic enamel ordinary tint paint over a coat of red oxide primerr complete all as specified and as directed by the Engineer-in-Charge

S&F box type ventilators glazed/gauged including MS grills of square section 8mm dia @ 100 c/c completes with glazing bars dovetailed or welded, including two coat of synthetic enamel ordinary tint paint over a coat of red oxide primerr complete all as specified and as directed by the Engineer-in-Charge

S & F for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, quality confirming to GDE Fe410-W(Gde E-250 quality-B) complete all as specified and as directed by the Engineer-in-Charge

S & F for 1.25mm thick mild steel, plain & black sheet in wall cladding, steel gates and similar work; cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc. as required complete all as specified and as directed by the Engineer-in-Charge

S & F 35mm thick, 2nd class HW, plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed by the Engineer-in-Charge

S&F35 mm thick, 2nd class Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified and as direced by the Engineer-in-charge.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge

S&F factory made solid PVC moulded door shutters with partical board core 28 to 30 mm thick 9styles) with 2, 4, or 6 raised panel design with 2 mm thick prelaminated moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face fixing in frame at site as per specification and drawing complete all as specified and as directed by the Engineer-in-Charge

S & F 100mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed by the Engineer-in-Charge

All as per item Sr No 1.22 as above but in repair, complete all as specified and as directed by the Engineer-in-Charge

S & F MS butt hinges 100 mm long medium weight and fixed complete all as specified and as directed by the Engineer-in-Charge

All as per item Sr No 1.24 as above but in repair, complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing for 300mm long aluminum alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter complete all as specified and as directed by the Engineer-in-Charge.

All as per item Sr No 1.26 as above but in repair, complete all as specified and as directed by the Engineer-in-Charge

S & F 150mm aluminium handles, cast type, anodised complete all as specified and as directed by the Engineer-in-Charge

All as per item Sr No 1.28 as above but in repair, complete all as specified and as directed by the Engineer-in-Charge

S & F 200mm long aluminium barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed by the Engineer-in-Charge.

All as per item Sr No 1.30 as above but in repair, complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing for 300mm long mild steel ordinary rat tail rod pattern springs for doors including roller and roller plate complete all as specified and as directed by the Engineer-in-Charge

All as per item Sr No 1.32 as above but in repair, complete all as specified and as directed by the Engineer-in-Charge

Small fitting such a brackets of any type ,latch and hinge block , shaped door and window stops and the like including all necessary labours articles n. exc200 Cu cm each complete all as specified and as directed by the Engineer-in-Charge.

S & F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 290 or Gde E-165 complete all as specified and as directed by the Engineer-in-Charge

M & L for providing cement concrete 1:2:4 Type B1 using 20mm graded aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by the Engineer-in-Charge.

S & F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvalinised wire staples complete all as specified and as directed by the Engineer-in-Charge

S& Fixed in repair mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire stapple, or complete all as specified and as direced by the Engineer-in-charge.

M & L for hacking out old broken glass exc 1.5 sq m (any thickness, size, quality or description) from metal frame including punching or drilling out glazing pins/springs clips and providing and fixing new ones complete all as specified and as directed by the Engineer-in-Charge

M & L for sheet glass 3.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and as directed by the Engineer-in-Charge

S & F for 3.0mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq m in each pane complete all as specified and as directed by the Engineer-in-Charge

Supply and fix in repair decorative type 25 mm dia MS powder coated curtain rod complete with fancy type caps and end brackets complete all as specified and as directed by the Engineer-in-Charge

M&L for prepration of new wooden surface and apply two coat of synthetic enamel paint over a coat of pink primer surface of any description , not otherwise described over 10cm width or girth complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new steel surface applying two coat of synthetic enamel ordinary tint paint over a coat of red oxide primer on steel or iron surfaces of description over 10cm in width or grith, not otherwise described complete all as specified and as directed by the Engineer-in-Charge.

M & L for running welding in repairs, Thickness of metal to be welded N exc 6mm, complete all as specified and as directed by the Engineer-in-Charge

S & F In repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 140mm complete all as specified and as directed by the Engineer-in-Charge

M&L for 16 to 18 mm thick MDF board prelaminated MDF board , exterier grade (grade-1) confirming IS 14587, fixed with nails for kitchen cupboard and cabinet ,self for cupboard , frame with door if required including 3mm thick 2nd class hardwood leeping patti on cut edge of boards in repair complete all as specified and as directed by the Engineer-in-Charge

S&F 30mm wide Continuous (piano) hinges, mild steel, bright finish or electrogalvanised fixing to wooden frame complete all as specified and as directed by the Engineer-in-Charge

S&F 100mm long fancy type Brass handles, cast type, polished bright complete all as specified and as directed by the Engineer-in-Charge.

S&F magnet catcher fixed in cabnet shutter (one portion) and wooden frame (other portion) with screw complete all as specified and as directed by the Engineer-in-Charge

M & L for taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by the Engineer-in-Charge

M & L for taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by the Engineer-in-Charge

M & L for 20mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by the Engineer-in-Charge

M & L for 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by the Engineer-in-Charge

M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick walls complete all as specified and as directed by the Engineer-in-Charge

S&F in repair vitreous china white wash hand basin flat back white in colour with pedestal ISI marked of size 550mm x 400mm with chromium plated waste coupling and PVC waste pipe fixed to walls with CI breckets 2 Nos embedded in CM 1:4 type complete all as specified and as directed by the Engineer-in-Charge

S & F in repair ISI marked waste coupling fittings 32mm dia of brass, chromium plated for glazed ware sink, basins etc. with long screwed shanks and fly nuts flange end bedded in red lead cement complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs of ISI marked fancy type Pillar Tap of 15mm bore dia, chromium plated, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed by the Engineer-in-Charge.

S & F in repair Swan Neck, Left Hand Operating Knob Pillar Tap of 15mm bore dia, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed by the Engineer-in-Charge.

S/F in repair WHB mixer brass chromium plated hot and cold complete all as specified and as directed by the Engineer-in-Charge of

S/F in repair wall mixer brass chromium plated hot and cold as specified and directed of

Supply and fixing in repair Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe). Squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and as direced by the Engineer-in-charge.

Supply and fixing repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe).Wash down water closet (Pedestal pattern), complete all as specified and as direced by the Engineer-in-charge.

fixing only Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe). Squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and as direced by the Engineer-in-charge.

fixing only Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe).Wash down water closet (Pedestal pattern), complete all as specified and as direced by the Engineer-in-charge.

Fixing only vitreous china white wash hand basin flat back white in colour with pedestal ISI marked of size 550mm x 400mm with chromium plated waste coupling and PVC waste pipe fixed to walls with CI breckets 2 Nos embedded in CM 1:4 type ccomplete all as specified and as directed by the Engineer-in-Charge

Supply only plastic water closet seat cover , black, white closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets .Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern. Flushing cistern and flushing pipe (exclusive of brackets), fixed in repairs complete all as specified and as direced by the Engineer-in-charge.

S & F in repairs of 15mm bore fancy type stop valve, chromium plated brass screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repairs of 15mm bore Stop valves, brass chromium plated screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated with long shank and cup (conncelaed type) complete all as specified and as direced by the Engineer-in-charge.

S&F for 15mm dia angular cock of brass chromium plated, with long shank and cup screwed down high pressure, with crutch or butterfly handle complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs 15mm bore dia stop valves of PTMT, any colour high pressure, screwed for iron pipe and fixed (minimum weight 90gms) complete all as specified and as directed by the Engineer-in-Charge

S&F in repair 15mm bore dia bip tap standard of PTMT any colour screwed for iron pipe and fixed (Minimum weight 15mm - 90gms/20mm-125gms) complete all as specified and as direced by the Engineer-in-charge.

S&F in repair for 15mm bore dia fancy type Bib taps, chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as direced by the Engineer-in-charge.

S&F in repair for 15mm bore dia fancy type Bib taps long body chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as direced by the Engineer-in-charge.

S/F in repair hand health faucet complete all as specified and as directed by the Engineer-in-Charge

S & F in repair 15mm size PVC connections with PTMP nuts of length 450mm complete all as specified and as directed by the Engineer-in-Charge

S & F in repair of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2, make : Zoloto / Leader for iron pipe of size 15 mm bore complete all as specified and as directed by the Engineer-in-Charge

S & F in repair of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2, make : Zoloto / Leader for iron pipe of size 20mm bore complete all as specified and as directed by the Engineer-in-Charge

S&F in repair jet spray CP with flexible pipe complete all as specified and as directed by the Engineer-in-Charge

S&F in repair PVC waste Pipe 32/40mm dia and fixed complete all as specified and as directed by the Engineer-in-Charge

S&F in repair CP Soap dish 100mmx50mm complete all as specified and as directed by the Engineer-in-Charge

S&F in repair Brass chromium plated shower rose 125mm size complete all as specified and as direced by the Engineer-in-charge.

S & F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by the Engineer-in-Charge

S&F in repair Kitchen plate rack of steel 1mm thickness size 900 x 900x 250mm Ofof weight not less than 8 Kgs complete all as specified and as directed by the Engineer-in-Charge.

S & F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; in-cluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connect-ing union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by the Engineer-in-Charge.

S/F in repair fancy type cabinet mirror complete all as specified and as directed by the Engineer-in-Charge

S & F in repair shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and as directed by the Engineer-in-Charge

M & L in repair 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by the Engineer-in-Charge

S & F in repair grating doom 100mm dia of PTMT (minimum weight 25gms) complete all as specified and as directed by the Engineer-in-Charge

M & L for dismantling water tanks exc 250 but not exc 500 Litres, and removing to store complete all as specified and as directed by the Engineer-in-Charge

M & L for dismantling water tanks exc 500 but not exc 1000 Litres, and removing to store complete all as specified and as directed by the Engineer-in-Charge

Material & Labour for 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top & FDA approved, tripple layer body, 100% UA stablised, rust proof) hoisted and fixed in position all as specified in SSR Part-I, complete, all as specified and as directed by the Engineer-in-Charge. Note : Water storage tank shall be White.

Material & Labour for 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top & FDA approved, tripple layer body, 100% UA stablised, rust proof) hoisted and fixed in position all as specified in SSR Part-I, complete, all as specified and as directed by the Engineer-in-Charge. Note : Water storage tank shall be White.

S & F of for ISI Marked 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed by the Engineer-in-Charge.

M & L for taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed by the Engineer-in-Charge

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed by the Engineer-in-Charge

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed by the Engineer-in-Charge

S & F 110mm bore PVC (SWR) bends of any radius, complete all as specified and as directed by the Engineer-in-Charge

S & F 75mm bore PVC (SWR) bends of any radius, complete all as specified and as directed by the Engineer-in-Charge

Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, fixing glass panes, minor adjustment of joinery, door etc. including petty repairs material like screws/nails, plug etc. to make it functional complete all as specified and directed by Engineer-In-Charge. Note : Any items required to be replaced shall be paid under respective items.

Checking of floor, plinth, plaster etc requiring masonry work and carrying out minor repairs such as edges, patches etc, including petty repairs material like sand, cement & aggregate to make it functional complete all as specified and directed by Engineer-In-Charge. Note : Any items required to be replaced or major repair shall be paid under respective items.

Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumber work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(shoot), M-seal, screws, nails to make water supply/ plumbing lines functional and leak proof complete all as specified and directed by Emgr-In-Charge. Note : Any items required to be replaced shall be paid under respective items.

Cleaning of sewage line upto first man holes blockage of WC, EWC, Bathroom, floor trap of WHB/Kitchen pipe etc complete all as specified and as directed by the Engineer-in-Charge

M & L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge

M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match inculding 15mm thick screed bed in cm 1:4.complete all as specified and as directed by the Engineer-in-Charge

do but on skirting on 10mm thick rendring in cm 1:4complete all as specified and as directed by the Engineer-in-Charge

M & L for Glazed Coloured Ceramic tiles in vertical surface exceeding 0.11 sqm but not exceeding 0.18 sqm thick set and joint in neat cement slury and pointed in white or colour cement to match incl 10 mm thick cement plaster in cm 1:4 complete all as specified and as directed by the Engineer-in charge.

M & L for 25mm thick cement concrete 1:2:4 type B-1, using 20mm graded aggregate complete all as specified and as directed by the Engineer-in-Charge

Demolation cement Concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as direced by the Engineer-in-charge.

M & L for providing PCC 1:2:4 type B1 using 20mm graded aggregate as in landings, precast cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete with joints to match, except blocks or slabs complete all as specified and as directed by the Engineer-in-Charge.

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge

Dismantling of cast iron or reinforced of cast iron or reinforced concrete drain pipes or SGSW pipes jointed in cement mortar and taking out of trenches floor and wall complete all as specified and as directed by the Engineer-in-Charge

Excavating in trenches n'exc 1.5 m width and n'exc 1.5 m in depth for foundation etc n'exc 10 sqm on plan and n'exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed by the Engineer-in-Charge

M & L for concrete bed in PCC 1:3:6 type C2 (using 20 mm graded stone aggregate) to drain pipes including packing under,and haunching against the sides of pipes, after they are laid and tested for 100 mm dia (internal) PVC (SWR) pipes complete all as specified and as directed by the Engineer-in-Charge (Pipes shall be measured & paid separately).

M & L 100 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by the Engineer-in-Charge

Returning filling in including spreading levelling and watering and well ramming in layers not exc 25 cm complete all as specified and as directed by the Engineer-in-Charge

Removing excavated material exc 250 m but n exc 500 m distance and depositing complete all as specified and as directed by the Engineer-in-Charge

Taking down and repair aluminum shutter with chowkat and replacing glass and fixing with rubber beading and cleats , and shutter lock resecuring aluminum shutter and chowkat of any size . (Glass and floor spring shall be paid separatly in respective item only).

M & L for tinted glass 5.5mm thick, ordinary quality and glazing with rubber beading complete all as specified and as directed by the Engineer-in-Charge

S & F in repairs double action floor spring, hydraulically regulated, made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed by the Engineer-in-Charge

Dismantling of plain or corrugated steel sheeting any gauge any thickness incl Nainital or similar pattern coverings, complete all as specified and as directed by the Engineer-in-Charge

S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa AZ, 150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by the Engineer-in-Charge

S&F Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I S.1161-1979 grade St.-240 including dismantling incuding wooden truss scantling and purlin complete all as specified and as directed by the Engineer-in-Charge.

S & F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick A Z 150 of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling complete all as specified and as directed by the Engineer-in-Charge

Preparation of old decorated brick/concrete, plastered / un--plastered surfaces of walls by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash over prepared surfaces of wall, pillar, cornices complete all as specified and as directed by the Engineer-in-Charge

Preparation of old decorated brick/concrete, plastered / un--plastered surfaces of walls by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of white wash over prepared surfaces of the walls pillars, cornices etc. complete all as specified and as directed by the Engineer-in-Charge

Preparation of old decorated brick/concrete, plastered / un--plastered surfaces of ceiling by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on ceiling complete all as specified and as directed by the Engineer-in-Charge

Preparation of old decorated brick/concrete, plastered / un--plastered surfaces of ceiling by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash on ceiling complete all as specified and as directed by the Engineer-in-Charge

Preparation of old decorated brick/concrete, plastered / un--plastered surfaces of ceiling by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of distemper oil emulsion on ceiling and using roller complete all as specified and as directed by the Engineer-in-Charge

Preparation of old decorated brick/concrete, plastered / un--plastered surfaces of walls by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper over prepared surfaces of the walls pillars, cornices etc. and using the roller complete all as specified and as directed by the Engineer-in-Charge

Preparation of old decorated brick/concrete, plastered / un--plastered surfaces of walls by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of oil bound distemper over prepared surfaces of walls pillars, cornices etc.using roller complete all as specified and as directed by the Engineer-in-Charge

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means complete all as specified and as directed by the Engineer-in-Charge

M&L for wall care putty (1 mm thick) and Preparation of surfaces complete all as specified and as directed by the Engineer-in-Charge.

M&L for Preparation of old decorated of wall two coat of plastic emulsion on interior with roller surface of any description over 10cm girth or width, not other wise described using the roller complete all as specified and as directed by Engineer-in charge .

Preparation of old decorated brick/concrete, plastered / un plastered surfaces of walls, pillars cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint on the walls pillars, cornices etc. complete all as specified and as directed by the Engineer-in-Charge.

M&L for applying two coat of cement base paint over a coat of alkali resistant primer on the walls pillars, cornices etc. complete all as specified and as directed by the Engineer-in-Charge.

M&L for Preparation of old decorated wooden Surfaces one coat of synthetic enamel (ordinary tint) any description, not otherwise, described, over 10cm width or girth complete all as specified and as directed by Engineer-in charge .

Preparing old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by the Engineer-in-Charge

Swami Enterprises

Sawhney Constructions

M/S M S BUILDER AND CONTRACTORS