Construction of Govt. Ayurveda Dispensary building at Konmelkunda village in Bhalki taluka Bidar Dist. BDR252213203. (SC Reserved)

Ground floor - civil

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying inposition Cement Concrete for all Sub structures of building, Irrigationworks,Substructureworksofbridges,Drainworks&other parallelworks from 0.50m to 3.50m height. Thegranite/tra...

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 0cm in depth, consolidating each deposited layer by ram...

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as dire...

Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as dire...

Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as dire...

Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as dire...

Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as dire...

Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as dire...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Aldrop 16mm dia, 300mm

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Handles 200mm

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Tower Bolts 200x10mm

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS hinges 125 mm

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm ...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Providing& fixingof 3-track x 2-panel sliding windows madeout of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(TitaniumDioxide) at 6PHR with TPE (Thermo Plastic Elastomer) ...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth re...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in require...

Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made o...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

First Floor - Civil

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as dire...

Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as dire...

Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as dire...

Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as dire...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Aldrop 16mm dia, 300mm

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Handles 200mm

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Tower Bolts 200x10mm

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS hinges 125 mm

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm ...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Providing& fixingof 3-track x 2-panel sliding windows madeout of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(TitaniumDioxide) at6PHRwithTPE(ThermoPlasticElastomer) andlea...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth re...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Water supply and Sanitary work

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

P/F BRASS BIBCOCK

PProviding and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class Premium . item no 14.55 B...

P/F BRASS ANGLE VALVE

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 ( item no 13.16 ) page no 117 Volume-2 KPWD SR-2023-24

P/F BRASS STOPCOCK CONCEALED

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. ( item no 13.15 ) page no 117 Volume-2 KPWD SR-2023-24...

Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ( item no 14.22B ) page no 135 Volume-2 KPWD SR-2...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement 600 mm long towel rail with total length of 6...

P/F SOAP DISH HOLDER

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g ( item no 13.26 ...

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and mak...

PVC connection pipe

Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length ( item no 13.8.2.1 ) page no 116 Volume-2 KPWD SR-2023-24

P/F MIRROR WITH FRAME

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved qualit complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screw...

WATER CLOSET EUROPEAN TYPE

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cister...

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe32 mm dia ( item no 14.28.2.1 ) page no 136 Volume-2 KPWD SR-2023-24

EARTH WORK EXCAVATION

Earth work excavation In ordinary/soft rock without blasting upto 1.5 m depth for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical spec...

BRICK MASONRY FOR INSPECTION CHAMBER

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with fr...

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 ...

200mm P/F UPVC FOAM CORE PIPE

Supplying UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and low...

SEVER PIPE LINE 75MM

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints c...

SEVER PIPE LINE 110MM

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints ...

Water supply and Sanitary work - FF

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

P/F BRASS BIBCOCK

PProviding and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class Premium . item no 14.55 B...

P/F BRASS ANGLE VALVE

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 ( item no 13.16 ) page no 117 Volume-2 KPWD SR-2023-24

P/F BRASS STOPCOCK CONCEALED

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. ( item no 13.15 ) page no 117 Volume-2 KPWD SR-2023-24...

Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ( item no 14.22B ) page no 135 Volume-2 KPWD SR-2...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement 600 mm long towel rail with total length of 6...

P/F SOAP DISH HOLDER

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g ( item no 13.26 ...

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and mak...

PVC connection pipe

Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length ( item no 13.8.2.1 ) page no 116 Volume-2 KPWD SR-2023-24

P/F MIRROR WITH FRAME

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved qualit complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screw...

WATER CLOSET EUROPEAN TYPE

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cister...

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe32 mm dia ( item no 14.28.2.1 ) page no 136 Volume-2 KPWD SR-2023-24

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...

Electrical Work

Concealed conduit system : Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running befo...

Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement...

Point wiring using Copper wire with switch : Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi st...

Point wiring using Copper wire with switch : Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi st...

Point wiring using Copper wire with switch : Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi st...

Supplying and fixing 32Amps security and energy saving DP switch with key tag suitable to operate suitable to operate on 230 Volts, 50Hz AC supply & completely wired on existing box. ( Page No.9, Item...

Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required no's of machine screwes, bolts, nuts etc., complete on the existing...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Using Group " A" Materials 6Amps one way. ( Page No.9, Item No.3.6.1 of Vol ...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Using Group " A" Materials Stepped Fan regulator. ( Page No.9, Item No.3.6.4...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying & Fixing of 70-150 Watts lamp holder 2 Pin ( Page No.52, Item No.12.46 of Vol -VI of PWD Electrical SR 2023-24)

Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power fac...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles, Single phase AC supply conforming ot ISS-374-1979 and with double bal...

Fixing all types and all capacities of fluorescent/false ceiling/spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twin twisted PVC insulated wires, required Nos ...

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessar...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/ panel using necessary nuts, bolts and washers etc., complete 32 Amps (Item No 5.7.2 Page No.14 of Vol -VI of PWD Electrica...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and "C" Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc. with provision for fixing suitable type capacity MCB's single phase/3 Pha...

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood/ panel board.25 amps 2 pole (Page No.18, Item No. 5.20.1 of Vol -VI of PWD Electr...

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter.(Page No. 19, Item No. 5.30 of Vol -VI of PWD Electrical SR 2023-...

Fabricating supplying and mounting MS box made out… SWG suitable for floor/ wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...