Renovation of Veterinary Colony Park, 4th Division in Circle-3 area.Rc.E3.PD3(Parks)-109135/2026

Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS Two coats -Plastered Surface(Internal Walls)

Two coats -Plastered Surface(External Walls)

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational incidentalm labour charges such as shoring, sheeting, planking, struting, etc, complete for finished item of work including seigniorage exclduing dewatering charges etc, as per SS - 20 B (APSS 308)

Collection and Supply of Dust for filling including Cost and coneyance charges, Spreading, Sectioning etc., complete.

Supply . Delivery, laying and jointing of high strength precast concrete blocks interlocking reflecting designer (Rubber Mould) 60mm for paving of M-40 grade and top 10mm thickness shall be for imported colour pigmentation with approved colours and white cement to get reflecting as per drawings and technical specifications as directed by departmental authorities

Brick Masonry work in CM (1:6) proportion with manufactured Fal-G Blocks of size 290 x 200 x140mm using flyash of 80kgs, cement of 15kgs. Gypsum of 5kgs. And stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compresive strength not less than 50kg/sqm for walls for Superstructure walls.

Plastering for walls in CM (1:4) 12mm thick including cost and conveyance of all materials, labour charges for mixing of mortor watering curing etc. complete.

Painting with Synthetic Enamel Paints -Two coats -for Old Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. 160 mm dia PVC pipe 8 Kgs/cm2

Labor charges for providing of filter point by cutting slots to 160mm PVC pipe but excluding cost of pipe etc., complete as directed by the departmental authorities

Supply and delivery of 160mm dia PVC dummy including cost and conveyance of work site etc., complete as directed by the departmental authorities

Providing Solvent Cement / Gum 1000ml for the pipe joints and as directed by the departmental authorities.(BMW-G.149)

Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 200/225/300 /350/450 mm hole (for insertion of 110/140/160/180/200mm PVC Pipe / 175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burried channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebullied pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, clamps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per ISI specification used for rotary tube well. The117 pebbled gravel packing should be carried out in such a way that the theoritical quantity consumed completely. The entire work to be carried out as per I.S. 2800 Part - I & II of 1979 and including cost of all materials and all labour charges and excluding all taxes etc.,Drilling of Bore well 350/450mm dia for insertion of pipe dia of 160/175/200 mm

Supply and delivery of Bentonite powder including cost and conveyance of all materials as per SS M-071, MAT-00235

Supply and Transportation of ………..,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding, pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 240V ± 10% , Single Phase 50 Hz AC supply, etc complete for 4" Bore well. Makes: As per list of recommended brands as category II. MAT-03648 2.00HP 25 Stage

Supply of ……...ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. Makes: As per list of recommended brands as category I 3 core, 2.5 Sq mm MAT-02773

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) OD 40 mm 10.0 kg/ sqcm MAT-07310

Supply and fixing of MS clamp set (2 Nos) suitable for 32mm dia pipe with 8Nos nut & bolts

S& F31.75mm dia GI bend Ist quality MAT-01840, BMW-F.09

S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 40 mm NB Size MAT-01849, BMW-F.25

Supplying & fixing Gunmetal (GM) Horizontal Check (Non return) Valve as per IS-778 I-class heavy duty - 40 mm NB Size MAT-01855, BMW-F.37

S& F 40 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete. MAT-05247, BMW-F.87

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)

)41.30mm ODPipe - SDR 13.5 - MAT-02316

28.60mm ODPipe - SDR 13.5 - MAT-02314

22.20mm ODPipe - SDR 13.5 - MAT-02313

Supply of 20mm PPR Ball Valve conforming to DIN Standards 8077/8092 MAT-02495

Supply of 40mm x 25mm PPR Reducer conforming to DIN Standards 8077/8092 MAT-02398

Supply of 25mm x 20mm PPR Reducer conforming to DIN Standards 8077/8092 MAT-02394

Supply of 40mm PPR Standards 8077/8092 Ball Valve conforming to DIN MAT-02498

Fabrication , transportation and supply of suitable size panel board for single phase submersible motor 2 to 3HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of complete.,. Makes: As per list of recommended brands

Fabrication , transportation and supply of Syntex Box for Starter Board including all fittings etc., complete as directed by the departmental authorities

Manufacturing, Supply, Delivery and fixing of M.S. Iron Gate , MS Grill using with M.S. Angulars, M.S. flats including cost and conveyance of all materials and labour charges for cutting, welding, grinding and fixing etc., , complete.as directed by the departmental authorities.

Painting with Synthetic Enamel Paints -Two coats -for New Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS