SPECIAL REPAIR TO ORs MARRIED ACCN

Amount

Taking down existing complete roof /parapet treatment any thickness including mud phuska, plastering, brick tiles, leaping plaster of any thickness cuting & up rooting tree roots/Vegitable growth & removing the debris from the premises upto 500m from the MOD land including cleaning/washing down and keeping surfaces clean complete all as specified and as directed.

M & L for brushing neat cement slurry (@ 3 Kg of cement per Sqm) mixed with water proofing compound in the proportion ,water proofing compound, water and cement (1:4:7) or as per manufacturer's instructions for bonding of old concrete surface to new concrete, complete all as specified and as directed.(Note:Water proofing compound shall be measured and paid seprerately under respective item of "BoQ")

M & L for PCC (1:2:4) ,type B-0 (using 12.5mm graded crushed stone aggregate),mixed with integral water proofing chemical compound, mixed in proportion 200 milli litre per 50 Kg of cement as in padding, benching, sunken portion, correcting/making proper slope on roof, etc.,complete all as specified and directed. Note: Water proofing compound will be measured & paid separately under respective item of BOQ

M & L for cutting 75 mm wide and 65 mm deep in brick wall/PCC block/RCC surface any location shaping horizontal face groove filled with PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) with and including chemical compound mixed in proportion 200 mili litre per 50 Kg of cement , laid when concrete is still green, complete all as specified and as directed. Note:Water proofing compound will be measured and paid seprerately under respective item of "BoQ".

M & L for application of water proofing treatment using APP modified roof membrane over non accessible/ non approachable RCC roof slab / chajjah / canopy / parapet wall( horizontal/vertical surface) to be executed through approved applicator of the membrane manufacturer/authorized applicator of the manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly with wire brush & apply 10 mm thick plaster /rendering in cement mortar (1:3) mixed with integral water proofing chemical compound, mixed in proportion 200 milli litre per 50 Kg of cement. (b) Cleaning of roof surface & Applying approved bituminous based primer( conforming to IS: 3384-1995) @ 0.50 litre / Sqm manufactured by the same agency as that of APP membrane with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface (c) Laying not less than 3mm thick APP (Atactic polypropylene Polymer modified prefabricated membrane) modified water proofing membrane weighing not less than 3.00 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gms/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Physical property of membrane shall be as under :- (i) Membrane weight not less than 3.00 Kg/Sqm. (ii) Non woven polyester weight not less than 160 gms/Sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 150 Kg / Sqcm and transverse not less than 450 Kg /Sq.cm at 230 degree Celsius. (v) Tear strength - longitudinal not less than 300 N & transverse not less than 250N. (vi) Elongation of reinforcement not less than 30%. (vii) Impermeability under water pressure not less than 3 Kg/Sqcm. (d) APP modified polymeric membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Applying two coat of bituminious based Aluminium Paint @ 0.3 Kg /sqm over APP Membrane.

M & L for application of water proofing treatment using APP modified roof membrane over accessible/ approachable RCC roof slab / chajjah / canopy / parapet wall( horizontal/ vertical surface) to be executed through approved applicator of the membrane manufacturer/authorized applicator of the manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly with wire brush & apply 10 mm thick plaster /rendering in cement mortar (1:3) with WPC as per manufactures instructions(Note:Water proofing compound will be measured and paid seprerately under respective item of "BoQ") (b) Polymer modified liquid cleaning of roof surface & Applying approved bituminous based primer( conforming to IS: 3384-1995) @ 0.50 litre / Sqm manufactured by the same agency as that of APP membrane with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface (c) Laying not less than 3mm thick APP (Atactic polypropylene Polymer modified prefabricated membrane) modified water proofing membrane weighing not less than 3.00 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gms/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Physical property of membrane shall be as under :- (i) Membrane weight not less than 3.00 Kg/Sqm. (ii) Non woven polyester weight not less than 160 gms/Sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 150 Kg / Sqcm and transverse not less than 450 Kg /Sq.cm at 230 degree Celsius. (v) Tear strength - longitudinal not less than 300 N & transverse not less than 250N. (vi) Elongation of reinforcement not less than 30%. (vii) Impermeability under water pressure not less than 3 Kg/Sqcm. (d) APP modified polymeric membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) A coat of hot blown bitumen @ 1.2 Kg per square meter applied over polymeric membrane with lean dry sand @ 0.5Kg per meter square.

M & L for machine pressed polished factory made cement concrete tiles 25cmX25cm X 22mm thick/ 30 cm x 30 cm x 22 mm thick, set, jointed and pointed in neat cement slurry with grey cement and no pigment ,laid over and including 20 mm thick cement screed bed in cement mortar (1:4) mixed with chemical compound as per manufacturers instructions & tiles laid with 3mm wide joints filled with chemical like tile grount as per manufacturers instructions complete all as specified and directed.

Supply only water proofing compound ISI marked. complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frames) of any description not exceeding 1.5 Sqm each & complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frames) of any description exceeding 1.5 Sqm but not exceeding 4.0 Sqm each & complete all as specified and directed.

S&F for 1.25 mm thick pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including plain cement concrete 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in filling in pressed steel door complete all as specified and directed. Note: The quoted unit rate under this item shall deemed to be included (i) one shop coat of primer (ii) a coat of bitumen paint of inner side of pressed steel door frame before filling of PCC.

S&F for 1.25 mm thick pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including plain cement concrete 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in filling in pressed steel door complete all as specified and directed. Note: The quoted unit rate under this item shall deemed to be included (i) one shop coat of primer (ii) a coat of bitumen paint of inner side of pressed steel door frame before filling of PCC.

S& F 32 mm thick,factory made flush shutters factory made, kiln seasoned and ASCU treated solid core construction, with block board core and ply wood face panels, commercial type on both sides decorative face with lipping/ frame complete all as specified and directed.

S & F 35 mm thick, factory made, IInd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (divided into squares with plain, chamfered or rounded, mitred and rebated sash bars any number size of members), beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); kiln seasoned & chemically pressure treated etc complete all as specified and directed . (Note:- (i)Glass / wire cloth shall be measured & paid separately.(ii) Sample of shutter in sample room of GE office.)

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors , windows , ventillators and partitions (fixed portions ) with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to ISS :733 and IS : 1285 , fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions , i.e. at top, bottom and sides with required EPDM rubbeer/neoprene gasket etc .Aluminium sections shall be smooth, rust free, straight , mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/paneling ,CP brass/stainl;ess steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

M & L for 4mm thick plain sheet glass ordinary quality and glazing with oil putty not exceeding 0.50 Sqm in each pane,complete all as specified and as directed by Engr-in-Charge .

S&F 3.0 mm thick frosted glass pin headed type in squares/ rectangular not exceeding 0.5 Sqm in each pane glazing with oil putty or aluminium frame/shutters with rubber neoprene beading complete etc all as specified & directed.

S & F for Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for framed work such as grills,gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railing; framework of water tanks and similar work conforming to Fe 290- Gde E -165 & for portions framed and hung as gates, including pintle hinges, stops,hand-made sliding bolts, etc.complete all as specified and as directed

S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tubes suppyling & fixing in opening as per specification & drawing complete all as spcefied and directed by Engineer-in-Charge.

S&F mild steel cupboard shutter with frame as Godrej pattern ,made out of 22 gauge mild steel sheet including chromium plated mild steel handle with proper locking arrangement (brass mortice lock vertical type size 65mm ,4 livers with escutcheon plates & two keys )with and including two coats of spray painting with synthethic enamel paint of approved tint over a coat of red oxide primer including fixing with 6 Nos 12 mm dia bolts 150mm long grouted in brick wall /concrete including makng good the disturbed surface as original complete all as specified and directed by Engineer-in-Charge.

S & F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tube for top and bottom rails. mild steel framed shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS framed welded/sealed to stiles & rails with suitable PVC sheet beading & joined together with solvent cement complete all as fixing in the frame at site as per specification and drawing complete all as specified and as directed.

S & F 100mm size butt hinges medium weight cold rolled stainless steel (SS) complete all as specified and directed .

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed.

S&F 125 mm long aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed.

S&F 125 mm aluminium alloy handles of extruted section type, anodised complete all as specified & directed.

S&F 300 mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repair mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

S & F 150 mm (overall length of cover plate) floor door stopper with rubber shoes aluminium alloy body and tongue, anodised ,with hard drawn steel spring,fixed in floor complete all as specified and directed.

M&L plain cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) in for inserting hold fast of doors & window & similar work etc. including necessary form work complete all as specified and directed

S&F in repair Harrison rails, mild steel chromium plated,fixing with bracket etc., complete all as specified and as directed by Engr-in-Charge.

S & F in repair brass CP fancy type bracket for fixing of curtain rod, suitable for 20 mm dia curtain rod of any approved colour and design complete all as specified and as directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the all rubbish off from the premises complete all as specified and directed.

Demolition of plain cement concrete(un-reinforced ) in ground floors, terrazo tiles floor & paving not exceed 15cm thickness (below or above ground level) and removal of rubbish off from site complete all as directed by Engr-in-Charge.

M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., over and including 15mm thick screed bed in cement mortar (1:6) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.

M & L glazed ceramic coloured tiles of size 300 mm x 450 mm x7mm thick ,as in vertical surface such as dado/skirting etc ,set and jointed in neat cement slurry and pointed in colour cement to match the tiles, over & including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for 10mm thick coloured vitrified ceramic tiles( light shade) polished area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm as in floors,set & jointed in neat cement slurry and pointed in coloured cement to match, over & including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

M & L for 10mm thick coloured vitrified ceramic tiles( light shade) polished area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm ,as in vertical surface such as dado/skirting etc ,set and jointed in neat cement slurry and pointed in colour cement to match the tiles, over & including 10 mm thick rendering in cement mortar 1:3 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20mm to 22 mm thick ( size not less than 575 mm X 575 mm), laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing with beeswax polishing into mirror finish over & including 20 mm thick screed bed in CM (1:4) complete all as specifed & directed.

M& L for machine cut Kota stone slab 18 mm to 22 mm thick as in vertical surfaces such as skirting/dados in narrow width,riser of steps, laid and jointed with grey cement slurry pointed with cloured cement to match the shade of the slab including grinding rubbing with beeswax polishing into mirror finish over 10 mm thick backing coat in CM (1:4) etc complete all as specifed & directed.

M & L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust,etc.complete with & including brushing neat cement slurry (@ 3 Kg of cement per Sqm) for bonding of old concrete surface to new concrete, complete all as specified and as directed.

M & L for machine cut kota stone slab flooring 40-50mm thick, laid over 20mm screed bed in cement mortar (1:4) as in step tread in one piece in one step,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing with beeswax polishing into mirror finish complete all as specified and directed.

M& L for machine cut white marble stone 16 mm to 18 mm thick as in border etc at at kota stone flooring , laid and jointed with grey cement slurry pointed with cloured cement to match the shade of the slab including grinding rubbing with beeswax polishing into mirror finish over 20 mm thick backing coat in CM (1:4) etc complete all as specifed & directed.

M&L for 18 mm to 20 mm thick granite slab (or any type) table rubbed and pre mirror polished in steps,jambs, pillar,window cill,cooking platforms and like in cement mortar1:4, set & jointed in neat cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over & including 15 mm thick screed base in cement mortar(1:4) etc including dismantling of exsting slab complete all as specifed and as directed.

M & L for 75 mm thick plain cement concrete (1:3:6) mix, type C-1 (using 20mm graded crushed stone aggregate ) as in plinth protection, finishing the surfaces even and fair without using extra cement, including 10 mm wide, 75mm deep joints made at 3.00 m in length and filled with bitumen 85/25 grade and sand in the ratio 1:3 including necessary form work , complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in kerb/benching/ copings including weathering, slightly rounded or chamfered angle and throating including use & waste of necessary form work etc complete all as specified and directed

Demolition of cement concrete reinforced as in chullah hoods, shelves, cover slab and platform, etc,including removal of rubbish out off MOD land etc complete all as specified and directed

M&L for precast reinforced cement concrete 1:2:4 ,type B-1 (using 20 mm graded crushed stone aggregate) as in kitchen platform, shelves ,man hole cover slab, etc. including necessary formwork complete all as specified and directed. Note : Reinforcement will be measured & paid seperately under respective item of BOQ.

M&L for mild steel TMT bars 08 mm dia and over grade Fe-500, cut to length, bent to shape required, including cranking bending spirally for hooping for column,, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete etc all as specified and directed.

M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n.exc 10 cm girth in brick wall complete all as specified and as directed.

M& L for machine cut cudappah stone slab 20-25mm thick over cement screed base, as in steps, cooking platform and other similar work, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M & L for rounding of edges of Kota/Cuddapah stone slab one edge, such as in steps, cooking platform and other similar work, complete all as specified and as directed.

Taking up or down steel tubing and connections of 15 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 15 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors including cutting chases for brick walls and making good the surface in cement mortar 1:3 complete all as specified & directed.

Taking up or down steel tubing and connections of 20 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 20 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors including cutting chases for brick walls and making good the surface in cement mortar 1:3 complete all as specified & directed.

Taking up or down steel tubing and connections of 25 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 25 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors including cutting chases for brick walls and making good the surface in cement mortar 1:3 complete all as specified & directed.

S&F rotational moulded polythene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed type), triple layer construction, ISI marked, hoisted and fixed in position including 20 mm bore GI nipple and 20 mm bore ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) including dismantling/ taking down of existing tank complete all as specified and directed.

S & F in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float and handle, PVC flush pipe 32 mm bore & PVC connection 15 mm bore 450 mm long with PTMT nuts and brackets complete set & making good disturbed surface with CM 1:3 complete all as specified and directed.

S&F in repair for PVC connection 15 mm dia size with PTMT nuts of length 450 mm for WHB & FLUSHING CISTERN complete all as specified and directed.

S&F in repairs 15mm dia bore angle stop valve , cast copper alloy fancy type, chromium plated with long shank and cup screwed down high pressure with crutch or butterfly handle screwed bot ends for iron pipe or for unions complete all as specified and directed

S & F in repair 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repair 15 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair stop valve 15mm bore chromium plated with long shank fancy type cast copper alloy, screwed down high pressure, screwed both ends for iron pipe or for brass ferrule fixed concealed in wall etc complete all as specified and directed.

S&F in repair 15mm bore long body (weight not less than 400 gm)bib tap, cast copper alloy, CP fancy type with crutch or butterfly handle, screw down, screwed for iron pipe or for brass ferrule including flange complete all as specified and directed

S & F in repair pillar taps long body chromium plated, cast copper alloy with capstan head, chromium plated, screwed down with or without lettered 'Hot' or 'Cold' with long screw shanks and fly nuts, screwed for iron pipe and fixed for 15 mm bore complete all as specified & directed

S & F in repair brass chromium plated shower rose with swivel joints, 125 mm size in square with CP long shank arm including fixing to steel pipe or union complete all as specifed & as directed.

S & F in repair vitreous China wash basin with padestal, any colour, flat back size 550 mm X 400 mm with full pedestal including 32mm brass chromium plated waste coupling , 32 mm bore PVC waste pipe, chromium plated Grating including cutting for & pinning in ends of bracket or errecting bracket ,fixing of pillar tap & PCC 1:2:4 ,type B-1(using 20 mm graded crushed stone aggregate) for embedding brackets & making good disturbed surface with CM 1:3 complete all as specified and directed.

M&L vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), fixing seat cover including connection to drain (or outgoing pipe, and to flushing pipe & antisyphonage pipe etc with aluminium hinging device including plastic seat cover & taking down existing pan & making good disturbed surface complete all as specified & directed.

S & F in repair health faucet(ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connection & fixed in position complete all as specified & directed.

S & F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300 gms), complete all as specified and as directed.

S&F kitchen sinks made of stainless steel 1.00 mm thick sheet with plugs, washers & waste coupling and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm X 460 mm bowl size 410 mm X 352 mm X 178 mm including 40 mm bore PVC flexible waste/flush pipe 800mm long with socket fixed with sink brass waste coupling complete all as specified and directed.

S & F in repairs stainless steel Kitchen plate rack of size 24"X36"X10" with steel shelves and hanging arrangments for utensil, complete all as specified and directed. (MAKE : Bluestar/Javana/Prayag)

S&F in repair towel rail brass chromium plated towel rail , 20 mm dia ,D-type 600 mm long between flanges fixed with and including chromium plated brass screw & wooden /plastic cleats complete set all as specified and directed.

Demolition of brick work of any description and in any position built in cement or cement lime mortar including all quoins, arches, pillars including segregation of serviceable bricks for reuse & removal of rubbish out off from site etc complete all as specified and directed.

M&L for Brick work with using old size sub class "B' bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 etc complete all as specified & directed.

Taking down cement plaster on brick wall or concrete surface etc including raking out joints hacking for key scrubbing down with water etc & removing the debris from the premises upto 500 m from the MOD land complete all as specified and directed.

M & L for rendering 15mm thick in cement mortar 1:4 on concrete/brick surfaces with liquid water proofing compound @ 200 ml/50 Kg of cement , finished even and smooth without using extra cement complete all as specified and as directed. (Note:Water proofing compound will be measured and paid seprerately under respective item of "BoQ")

M&L for 15mm thick rendering on brick or concrete surface in cement mortar 1:6, finishing surface even and smooth without using extra cement complete all as specified and directed.

M & L for 5 mm thick rendering in cement mortar (1:3) on concrete surfaces of ceiling surface finishing even and smooth without using extra cement, complete all as specified and as directed.

S&F in repairs bevelled edge mirror 600 mm x 450 mm x 5mm thick of any size mounted on commercial type plywood or AC sheets and fixed to wooden plugs with chromium plated screws including PVC beading complete all as specified and directed.

S & F in repair 110 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed on wall including PVC clamp properly with PCC 1:2:4 complete all as specified and directed

S & F in repair 75 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed on wall including PVC clamp properly with PCC 1:2:4 complete all as specified and directed

S & F in repair PVC (SWR) bends for 110mm bore PVC pipes with rubber ring joints complete all as specified and directed.

S&F in repair PVC (SWR) bends 75mm bore of any radius all as specified and directed

S&F in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

M&L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement with chromium plated grating with or without hole complete all as specified and directed.

S & F in repair 110 mm dia PVC(SWR) WC connector with lip ring, complete all as directed and as specified.

M&L for prepartion of new or previously untreated wooden surface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

M&L for prepartion of new or previously untreated steel surface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

M&L for complete removal of old/existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with preparation of plastered surfaces and apply two coats of distemper oil emulsion (OBD) over a coat of alkali resistant primer and a layer of wall care putty (not less than 2.0 mm thick )applying by pump roller applicator of any shade or tint complete all as specified & directed.

M&L for preparation of old decorated surfaces of ceiling including cornices, by brooming down or steel wire brushing to remove dust, dirt and loose scales and other foreign material, scrapping down, smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including filling the cracks and depressions with putty and applying one coat of oil bound distemper on ceiling surface at any height applying by pump roller applicator of any shade or tint complete all as specified & directed.

M&L for prepatation of newly plastered surface on wall and applying two coats of distemper oil emulsion (OBD) over a coat of alkali resistant primer (from same manufacturer of OBD) and a layer of wall care putty (not less than 2.0 mm thick )complete all as specified and directed.

M&L for prepatation of newly plastered surface on ceiling surface and applying two coats of distemper oil emulsion (OBD) over a coat of alkali resistant primer (from same manufacturer of OBD) complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 mg /lit and UV resistance as per IS:15489:2004 ,smooth exterior paint of required shade,alkali & fungal resistance, dirt resistance including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm complete all as specified and directed.

M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with preparation of plastered surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 mg /lit and UV resistance as per IS:15489:2004 ,smooth exterior paint of required shade,alkali & fungal resistance, dirt resistance including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm ,applying by bump roller applicator complete all as specified and directed.

Excavation in trenches in soft/loose of soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope/gradient for laying cables/pipes,foundations,laying of cable, shafts, well, cesspits, manholes etc. complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering & well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated soil not exceeding 50 m & depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Demolition and breaking up drain pipes of 150mm dia (SGSW/AC/RCC) set in cement mortar including bed concrete and removal of debris to low lying area of distance not exceeeding 100 mtr complete all as directed by Engr-inCharge.

M & L for 100 mm thick Concrete bed to 150 mm bore drain pipe including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) including necessary shuttering and tested of pipes complete all as specified & as directed

S & F 150 mm bore Reinforced concrete drain pipes of class NP-2 laid and jointed with collars in trenches and jointed complete all as specified and as directed.

S&F 18mm thick brand factory made WPC railing combining WPC board fancy designer type grating and WPC frame 100% solid WPC (Wood polymer composite) railing of required length and 2' to 2.5' height , comprising of virgin PVC resin of K value 58-60(Suspension geade) calcium carbonate and natural fibre (wood powders/ rice husk/ wheat husk) and non toxic additives made from single extrusion process, WPC foam board with having minimum density 780 kg/m3 manufactured by an ISO 9001-2015 certified company having good screw holding capacity (screw withdrawl strength of 2000N (face) and 1100N (edge) minimum comprising of 50N/Sqmm modulus of elasticity 850N/Sqmm and resistance of speed of flame of class a category with property of being termite/borer free water/ moisture proof and fire resistance . For WPC railing WPC jali to be fixed with 3"x3" GI "L" SS cleats to support vertical frame length including demolition of existing RCC jalies with frames complete all as specified and as directed.(Note: (a) The siad item shall be fixed over boundary walls/roof tops and in any other position as required at site .(b) MS Frame for fixing WPC jalli will be measured and paid separately

Dismantling loose/disintegrated portion of RCC Chajjas, Bands ,shelves , beams and similar works including provision of supports if required and dubbing ( also necessary repair) with PCC( 1:1.5:3) using 6mm to 12 mm thick graded stone aggregate in any portion of 15mm to 50mm including cleaning of visible reinforcement & treating with cement slurry, complete all as specified and directed.

Taking down carefully unserveciable/damaged copper/aluminium surface (batten/coduit or casing-N- caping) point wiring any length for light/fan/socket or power including unscrewing from board (fitting and fixture such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets ,light fittings etc) and removing material from site and making good to the disturbed surface to match with existing finish etc complete all as specified and directed.

M&L for point wiring for following point controlled by one way switch with using with FRLSH PVC insulated PVC unsheathed electric cable conforming to IS:694, 1100V grade AC single core having multi stranded copper conductor of size 1.5 Sq.mm nominal cross sectional area for phase & neutral and including non metallic rigid PVC conduit ISI marked heavy duty not less than 20 mm dia with all conduit accessories in concealed wiring system & 1.5 Sqmm green PVC insulated unsheathed multistranded copper conductor as a earth wire connected to earth dolly by providing lugs including sunken type GI pressed steel sheet terminal box made out of 1.6mm thick of suitable size,60 mm deep with earth dolly duly ,covered with modular white cover plate with inner frame suitable for modular switches for mounting fittings/junction boxes for housing/fixing switches etc., complete all as specified and directed. Note: Proper colour coding to be adopted:-

(a) One light point/ fan point /exhaust fan point controlled by one one way switch.

(b) One bell / buzzer point controlled by one, one push button on independent with cable .

(c) One 3/5 pin socket outlet 5 Amp on the same board with other swithes.

(d) One 3/5 pin 5 Amps socket outlet on indepandant board.

Ditto all as per item No. 109 here-in-before with 2.5 Sqmm (nominal area) FRLSH cable PVC for 15 Amp 3/5 pin socket power point including 2.5 Sqmm Copper Conductor for earth continuity all as specified & completed.

S & F switch piano flush button single pole one way 5 Amp, complete all as specified and as directed.

S & F Switch socket combination 2 in 1, 3 pin, 5Amp & 15/16 Amp, flush type, universal, complete all as specified.

S & F Switch socket combination 2 in 1, 3 pin, 5Amp flush type, universal, complete all as specified & as directed

S & F scoket outlet polycarbonate 2 in 1, 3 pin, 5 Amp flush type, universal, complete all as specified & as directed .

S & F ceiling rose three terminals PVC/ Polycarbonate, isolated body complete all as specified & as directed

S & F bell push flush type 5 amp AC 230 volts, single pole complete all as specified.

S & F in repair Bell electric, Ding- Dong AC, 230 volts, single pole complete all as specified and as directed.

S&F fan regulator electronic, step type hum free, socket type, suitable for ceiling fans of any capacity, pre wired 230 volts AC 50 HZ supply 100/120 Watt complete all as specified & as directed

S & F lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings (ISI marked), complete all as specified & as directed

S & F LED bulb of capacity 10 watt , lumen out put (950)lm ,length 113 mm dia 60 mm , base cap B22 (ISI mark) ,three star rated lamp with all accessories complete all as specified and as directed by Engineer-in-Charge.

S & F Inverter LED bulb of capacity 12 watt , lumen out put (1200)lm ,length 140 mm dia, 70 mm , base cap B22 (ISI mark) ,three star rated lamp with all accessories complete all as specified and as directed by Engineer-in-Charge.

Taking down ceiling fan/exhaust fan of any sweep after disconnecting all necessary electrical connctions from ceiling rose to fan complete all as specified and directed.

Labour only for the refixing ceiling fan/exhaust fan after servicing /repairing/overhauling by cleaning/greasing /oiling etc. including provision of connecting ceiling fan/exhaust fan to ceiling rose including three core flexible copper cable of size 1.5 sqmm not less than 0.5 mtr long for connection and preparation of old rusted surface of ceiling fans of any sweep by cleaning to remove only dust etc. and applying one coat of synthetic enamel (white shade) paint and marking MES number with non erasable marker pen with black colour complete all as specified & directed by Engineer-in-charge.

S & F for LED batten fitting 1x20W, 220 volt-surface mounting including connecting up with two core flexible copper conductor cable of suitable size with flexible pipe from ceiling rose to fitting of any size complete all as specified & directed

S & F in repair LED mirror type light fittings 1 x 9/10 watts integral slim LED batten with high out put diffuser 2 feet long ,220 volt ,AC decorative type with driver holder & LED lamp & all other accessories duly pre wired and making connection with and including two core flexible copper conductor cable and flexible pipe of suitable size from connector to ceiling rose not less than 1 mtr fixed on wall with plastic gutties complete all as specified & directed.

S& F 1X9 W/1X10 W watt LED Bulkhead fitting with IP 65 environmental frendly, ultra modern, energy saving mounted decorative oval bulk head edge lit LED luminaire comprising of high brightness LED 230 Volts AC circuit including light connecting up with two core flexible copper conductor cable and flexible pipe of suitable size from ceiling rose to fitting, complete all as specified and as directed by Engineer-in-Charge.

S & F building security lights with new generation energy saving & environment friendly long life versatile pressure die-cast aluminium IP65 roadway luminaries with high power LEDs as light source & exclusively designed polycarbonate cover along with electronic driver type street light fitting 35/36 watt capacity LED and including all necessary accessories duly pre-wired, fixing on bracket with nut, bolts & washers as required at site for fixing of street light on LT pole/ wall complete including taking down old / unserveciable security lights fitting any type and description complete all as specified and directed.

S& F Decorative wall mounted luminaires made out of polycabonate with unbreakable globe suitable for LED bulb and provisions of LED bulb 10 watts complete including LED light driver holder connecting up with two core flexible copper conductor cable and flexible pipe of suitable size from ceiling rose to fitting, complete all as specified and as directed by Engineer-in-Charge.

S & F sheet metal enclosures for DBs when MCBs to be used in single pole and neutral (SPN) double door 240 volts, 8 way, with magnetic locking system including necessary provision for inserting the the DBs in wall & suitable rated amp bus bar and neutral link (ISI marked) complete all as specified and as directed.

Supply and fixing miniature circuit breaker (MCB) of single poles and neutral (SPN), 'B' Curve, 240 Volt, breaking capacity 10 KA and current carrying capacity 32 Amp in the MCB DB with connection testing and commissioning complete all as specified and as directed.

S&F miniature circuit breaker (MCB) 240V, breaking capacity 10KA 'B' curve of single poles (SP) and current carrying capacity 6 to 32 Amp with breaking capacity 10 kA,IP 20 transperented lebel holder fully insulated safety shutters suitable for cable up to 35 sq mm cross sectional area in the MCB DB with connection testing and commissioning complete all as specified and as directed.

M & L Sub main wiring with two runs of single core 6.0 Sqmm PVC insulated FRLSH multistanderd copper conductor cable and one run of 6.0 Sqmm PVC insulated unsheathed FRLSH multi stranded copper conductor cable for earth wire drawn in & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 20 mm dia/appropriate dia with accessories & fittings complete and making good disturbed surface wall including taking down existing sub main wiring complete all as specified and as directed. Note : - Two runs of 6.0 Sqmm cable and one run of earth wire 6.0 sqmm & conduit shall be measured as one unit length and extra length of cable required for connection to MCBs shall be deemed to be include in unit rate quoted by bidder.

S&F in repair Rigid non-metallic PVC conduit 20mm dia (ISI marked) heavy duty & exclusive of boxes (junction/ terminal) but its accessories inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and such as couplers, lock nuts, saddles, pipe hooks etc.including taking down existing conduit complete all as specified and as directed.

M/S CHAUHAN CONSTRUCTION (BID ID -3130420)

M/s Kundu Enterprises (BID ID -3132415)

Ranchi Construction Company (BID ID -3133841)

M/s friend enterprises (BID ID -3130079)

M/S ABHAY KUMAR AND BROTHERS (BID ID -3134000)

M/S PARAS NATH SINGH (BID ID -3131907)

simplex infra project (BID ID -3130598)

JP ENTERPRISES (BID ID -3133258)

AASHIRWAD ENTERPRISES (BID ID -3133603)

M/S SHAMBHU SHARAN SINGH (BID ID -3132838)

upadhyay engineers and consultant (BID ID -3130495)