REPAIR MAINT OF SOLAR WATER HEATER CHLORONOME PLANTS VALVE PITS DG SETS AT WATER SUPPLY INSTALLATIONS AND SEWAGE INSTALLATIONS AND MISC ITEMS AT SECTOR C UNDER GE UTILITY AMBALA CANTT

Amount

Periodical Maintenance such as replacement of Engine Oil, Oil filter, Air filter and diesel filter, cleaning of air filters, replacement of water hose, cleaning of filter housing etc. Make: Kirloskar diesel engine generating sets, including replacement of rusted and defective nuts, bolts, and washers etc as required at site of following capacity,one in a quarterly duration all as specified and directed. Note: (i) Spares (Oil and filters) required for maintenance of DG set will be measured and paid seperately. (ii) Periodical maintenance/ servicing of DG Set shall be carried out at every 250 hrs or every six months whichever is earlier shall be done to maintain the serviceability of DG Set. (iii) Payment for each servicing shall be considered after each service satisfactorily.

SUPPLY ONLY SPARE PARTS FOR 500 KVA KIRLOSKAR DG SET

Fuel filter

Lub Oil filter

Air filter

Fan Belt

Fuel pipe kit

Coolant

Engine oil

SUPPLY ONLY SPARE PARTS FOR 400 KVA DG SET Make -KIRLOSKAR

Diesel filter

Lub Oil filter

Air filter

Fan belt

Diesel Pipe kit

Hose pipe kit

Coolant

Engine oil

SUPPLY ONLY SPARE PARTS FOR 125 KVA DG SET Make -KIRLOSKAR/Cummins

Diesel filter

Lub Oil filter

Air filter

Fan belt

Diesel Pipe kit

Coolant

Engine oil

Material and labour for caliberation of fuel injection pump by authorised dealer with replacement of worn out parts, testing and commissioning complete including alignment, plunger, packing kit, spring delivery valve etc. required to make the pump serviceable of DG set capacity 500 KVA to 400 KVA. (The item rate includes transportation of pump from site to dealers workshop and back).

Material and labour for caliberation of fuel injection pump by authorised dealer with replacement of worn out parts, testing and commissioning complete including alignment, plunger, packing kit, spring delivery valve etc. required to make the pump serviceable of DG set of capacity 125 KVA. (The item rate includes transportation of pump from site to dealers workshop and back).

Material and labour for removing the radiator after disconnecting from engine, opening the parts of radiator for servicing and repairing/ replacement of unserviceable minor parts including brazing/ welding complete of DG set of capacity 500 KVA to 400 KVA. (The item rate includes transportation of radiator from site to wksp and back and refixing the radiator in position).

Material and labour for removing the radiator after disconnecting from engine, opening the parts of radiator for servicing and repairing/ replacement of unserviceable minor parts including brazing/ welding complete of DG set of capacity 125 KVA. (The item rate includes transportation of radiator from site to wksp and back and refixing the radiator in position).

Supply and fixing in replacement of Turbo Charger Assy of DG set of capacity 400 KVA to 500 KVA incl taking down old u/sTurbo Charger complete all as specified.

Supply and fixing in replacement of Turbo Charger Assy of DG set of capacity 125KVA incl taking down old u/sTurbo Charger complete all as specified.

Material and labour for repair of self starter of 500 KVA DG set including taking out burnt out winding, rewinding the same and replacment of burn out parts carbon brush, brushes etc (Note: The items rates incl transpotation of self startor from site /store to workshop and back to site /store.

All as per ser. item no 11 here in before but for 400 KVA.

All as per ser. item no 11 here in before but for 125 KVA.

Supply and fixing in replacement of Water Pump Assy of DG set of capacity 500 KVA to 400 KVA incl taking down old/UNSV.

Supply and fix in replacement of flywheel ring gear for 500 KVA to 400 KVA DG set incl taking down old/UNSV.

Supply and fix in replacement of lead acid power pack unit (battery bank) maintenance free 12 volts 180AH capacity Make Exide/Amron including taking down existing battery pack unit.

Supply and fix in replacement of electric heating element of 3 KW suitable for thermostat housing of Solar water heater of 200 litre capacity.complete all as specified and directed.

Supply and fix in replacement of thermostat switch for Solar water heater of 100 LPD to 2000 LPD capacity.complete all as specified and directed.

Material and labour for opening the collector and providing chemicals for descaling the system with proper equipment complete and refixing the same for 100/200 LPD as specified and directed by Engr-in-Charge. Note: Here one job is considered as one complete solar water heating system and quoted rate must include the same thing.

Description all as per item No. 19 here in before but solar water heating system of 300/400/500 LPD capacity.complete all as specified and directed.

Description all as per item No. 19 here in before but solar water heating system of 800/1000 LPD capacity.complete all as specified and directed.

Material and labour for brazing/welding to hot water storage tank of solar water heater of 100 LPD to 500 LPD litre capacity made of stainless steel (IA SI-304) 1.6 mm thick.

Description all as per item No. 22 here in before but solar water heating system of 800/1000/2000 LPD capacity.

Supply and fixing in Replacement of PVC hose pipe for Solar water heating system of 100 to 2000 LPD capacity including clamps , washers, bolts etc where-ever required.

Supply and fixing in replacement of aluminum sheet 1mm thick for repairing of Hot water tank of any capacity Solar water heater system including nuts, bolts etc. all as specified and directed.

Supply, laying in replacement & testing in trenches GI pipe medium grade ISI marked with all fittings including earth work and fixing under PCC or wall complete all as specified for 20 mm bore.

Supply and fix in replacement of GI nipple 20mm bore 8" long for Hot water tank of solar water heating system of capacity 200 litres.

Supply and fix in replacement of anchor bolt 12mm x 100mm long complete all as specified and directed

Material and labour in replacement of solar flat plate collector with all necessary accessories complete all as specified and directed.

Material and labour for solar heating stainless steel tank of size 100/200/300 LPD capacity with heat exchanger including necessary connections, fittings incl taking down complete all as specified and directed.

Material and labour for solar heating stainless steel tank of size 500/800/1000 LPD capacity with heat exchanger including necessary connections ,fittings incl taking down complete all as specified and directed.

Material and labour for Glass wool /Rock wool for insulation of solar water heater complete all as specified and directed.

Material and labour for Lagging to pipes used in internal water supply or plumbing all round with,25min thick bonded mineralwool preformed ‘SNAP ON’pipe sections of density 144 Kg/cum conforming to IS aluminium cladding for insulation of solar water heater complete all as specified and directed.

Material and labour for Mild steel framed work for SWH stand, (made out of rolled section), cut to shape including bending and welding as necessary with complete accessories required for fixing of solar water heater hold fast conforming to Fe-310-O including tarring to the surface come in contact with the concrete or masonry work complete all as specified and directed.

Supply and fixing in replacement of 20 Watt LED fitting surface and wall mounted, extruded Alumininum housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver including flexible wire for electrical connection and testing complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of MCCB 4P, 415 Volts, 250 Amp, 25 KA complete all as specified and directed.

All as per item No 36 here in before but of 200 Amp,

All as per item No 36 here in before but of 100 Amp,

Supply & fixing in replacement of Neopin gasket .

Material and labour for replacement of make up steel tank of cap 5 ltr suitable for existing system as per specified and directed by Engr-in-charge.

Material and labour for dismantelling and opening of Gravity feed type chloronome plant for repairing and making the same functional including installation, testing & commisioning complete all as specified and directed by Engr-in-Charge. Note: Spare parts shall be measured and paid separately.

Supply & fixing in replacement of Teflon pipe 9.5mm dia with PVC nuts and nipple 5 mtr length

Supply & fixing in replacement of Primary filter with moisture nut and tube

Supply & fixing in replacement of Chlorine secondary filter with glass N.R.V

Supply & fixing in replacement of Glass Moisture trap

Supply & fixing in replacement of Rubber Washer for moisture trap tube

Supply & fixing in replacement of water Chlorine mixing chamber

Supply & fixing in replacement of PVC solutioniser as per existing

Supply & fixing in replacement of PVC Fitting Tee

Supply & fixing in replacement of water Bend

Supply & fixing in replacement of Glass bend with glass N.R.V

Supply & fixing in replacement of Solutioniser out let

Supply only synthetic rubber insulation mat of size 2mtrx1mtrx25 mm all as specified and directed by Engr-in-charge.

Supply only PH and chlorine testing kit suitable for testing with O-Tolidine solution for regular test including solution, in the packing 500 ml complete all as specified and directed by the Engineer-in-Charge. Make: NICE or equivalent as approved.

Supply and fix in replacement of Ammeter as per existing size, 0-200 Amp digital type with CT complete set all as specified and as directed by Eng-in-Charge.

Supply and fix in replacement of volmeter as per existing size, 0-500 Amp digital type with PT complete all as specified and as directed by Eng-in-Charge.

Supply and fix in replacement of ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 800 Amps complete all as specified and directed. Make havells or equivalent as per existing.

Supply and fix in replacement of ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 630 Amps complete all as specified and directed. Make havells or equivalent as per existing.

Supply and fix in replacement of ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 200 Amps complete all as specified and directed. Make havells or equivalent as per existing.

Supply and fix in replacement of defective aluminium bus bar(set of four) of rating upto 400 Amps including nut , bolts, washers, etc complete all as specified and directed.

Supply and fix in replacement of defective phase indicators (set of three red, green & yellow) of ratings 240 volts, single phase complete all as specified and directed.

Material and labour for repairs to panels by replacing broken hinges, thimbles of suitable size ,corroded nut, bolts etc including welding, drilling, cuttings etc complete and painting the panel by preparing the surfaces, applying two coat of synthetic enemelled paint, including making danger mark , supply and fix aluminium busbar set of four of suitable amperage as per requirement etc complete all as specified and directed.

Supply and fix in replacement of DOL starter for motor pump set upto 5HP all as specified and directed by Engr- In- charge

Checking and examining of existing decrin doser/chloronome plant (Full Vacuum Chlorinator type Make : Toshcon Jesco) installed at various water supply installation under GE (U) Ambala Cantt regularly as and when required & rectify the defects immediately as and when noticed in plants. Note: (i) Replacement of spare parts of same make and type shall be measured and paid separately. (ii) Payment should be made to contractor after satisfactory completion.

Supply & fix in replacement of maintenance kit for non return valve (back stop) consisting of 2 ‘O’ ring and 1 ball all as directed by Engineer-in-charge. .

Supply & fix in replacement of maintenance kit for vacuum chlorinator without inlet valve consisting of main diaphram alongwith disc to O rings 1 screw complete all as specified and directed by Engineer-in-charge.

Supply & fix in replacement of PVC measuring glass holder (wall mounting) with measuring glass range 25-500 gms all as directed by Engr-in-Charge.

Supply and fix in replacement of HDPE water tank of 500 ltrs 3 layer complete all as specefied and directed by engr in charge.

Supply & Fix in replacement of standrad venturi system suitable for cylinder mounted chloronome plants with fixing arrangement PVC TEE for fixing in the pipe line complete all as directed by Engr-in-Charge.

Supply & fix in replacement of Non Return Valve for cylinder mounted gaseous chloronome plant all as directed by Engr-in-charge.

Supply & fix in replacement of housing bottom with bush made of brass all as directed by Engineer-in-charge.

Supply & fix in replacement of housing cover with bush of brass all as directed by Engineer-in-charge.

Material & labour for dismantling, opening & rewinding of 3 phase 415 volts electric motor of capacity 3 to 5 HP with super enamelled copper winding wire as per existing gauge, cotton tape, leatherised strips, varnish, complete including testing after installation at site complete all as directed by Engineer-in-charge.

Dismantling & opening of booster pump for repairing, making the same functional including installation & testing, complete all as specified and directed by Engineer-in-charge. Note: Spare parts required shall be measured and paid separately as supply only under the respective items .

Supply only shaft bush of booster pump suitable upto 5 HP

Supply only ball bearing suitable for pump upto 5 HP.

Supply only bronze impeller

Supply and fix in replacement of rubber coupling complete with CI part of booster pump of capacity upto 5 HP all as directed by Engineer-in-charge.

Supply and fixing of LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete and making electric connection with PVC insulated copper conductor (multistrand) cable of 1.5 sq mm size complete including taking down all as specified and directed by Engr-in-Charge.

Repair/replacement of D.G. Exhaust pipe line of DG 500 KVA in syl by using SEAMLESS CS Pipe ,heavy class long radius bends of matching diameter along with necessary nut, bolt, washers and U-clamps etc thereon as required welding to be done as per best engineering practise by following high standard welding procedure, complete in all respect all as directed by Engineer-in-charge.

Supply and fix in replacement of ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 320 Amps complete all as specified and directed. Make havells or equivalent as per existing.

Supply, installation, testing and commissioning LT panel in replacement of suitable size as per IE rule and latest IS, factory made dust and vermin proof indoor type made out of 2 mm thick CRCA sheet including seperate compartment for each MCCB & for cable and busbar, mounted on frame of MS angle iron 40mmx40mmx6 mm with front and back openable door with lock & Key including necessary grouting and double coat powder coated of grey colour painting complete with following accessories.The degree of protection of panel shall be IP-54. Note:- (i) Above item 71 rate incl all items required for supply, installing , testing and commissioning of LT panel such as any no of contactor of suitable capacity required in star delta starter, time relay, single phase preventor, single pole MCB required for safety , thimbles, end joining kit etc complete all.The quoted rate shall include minor items such as lugs, nuts & bolts, washers, top insulators, sleeves, provision of extra holes in bus bar etc. (ii) All internal wiring shall be done with suitable size of PVC insulated solid copper conductor FRLS cable conforming to IS-694. (iii) Panel drawing shall be got approved before placing of order from Engr-in-Charge/GE. (iv) The bus connection for cable from main bus bar to outgoing MCCB will be connected through suitable rating bus bar strip type duly insulated. (v) Cable will be entered in panels through gland. (vi) Cost of marking description and matter on the front door as specified and directed by Engr-in-Charge is incl in quoted rate.

INCOMING: (i) 4 pole MCCB 320 Amp, 36 KA rupturing capacity - 1 No

(ii) Aluminium bus bar 3 phase 4 strip suitable for 500 Amps current carrying capacity complete with post insulators and heat shrinkable sleeves.

(iii) 320 amp on load changeover 4pole, 415 volt

(iv) Phase indicating lights & control fuses -1 Set

OUTGOING: (i) 4 pole, MCCB 200 Amps,25 KA breaking capacity with automatic star delta starter provided with suitable size contactor, over load relay , single phase preventor etc suitable for 60HP pump set complete - 03 Nos

(ii) 4 pole, MCCB 200 Amps,25 KA breaking capacity (1 spare)

(iii) 4 pole, MCCB 100 Amps,16 KA breaking capacity - 01 Nos

(iv) 4 pole, MCCB 32 Amps,16 KA breaking capacity with DOL starter - 01 Nos

(v) 4 pole, MCB 32 Amps,16 KA breaking capacity - 02 Nos (01 Spare)

(vi) RYB indication lamp -06 No.

Servicing/Repair of DG set capacity 160/125 KVA from authorised Service Centre of existing make Removing tappet cover and cylinder heads from DG set, grinding and polishing of cylinder heads, grinding of valve sets, grinding of inlet and exhaust valve after fixing new seats, calibration of injector, refitting cylinder head and tappet cover, changing of oil and replacement of defective parts including replacing all type filters and testing the DG sets on load. Note: (a) Only Original Spare parts shall be measured and paid separately under respective items as supply only. (b) Labour is included in this job for replacing following parts.

Supply only FUEL FILTER PAPER ELEMENT

Supply only OIL FILTER S/F GESNSET

Supply only SAFETY FILTER-SERVICE

Supply only PRIMARY FILTER-SERVICE

Supply only POWEROL SUPER PREMIUM COOLANT 5LTR

Supply only FUEL SPILL PIPE

Supply only FILTER CARTRIDGE & WATER SEPERATOR BOWL

Supply only POWEROL VALVOLINE SUPER PREMIUM OIL 20LT

Supply only POWEROL SUPER PREMIUM ENGINE OIL 6.75LTR

Supply only V-BELT DRIVE 1420

Supply only DOOR LOCK-BP IND.

Supply only FUEL RETURN TUBE S/F GENSET

Supply only ALTERNATOR TYPE SMR 100_1250KVA MOSFET

Supply only ASSY, WATER PUMP S/F 6 CYL

Supply only HOSE, RADIATOR - WATER INLET/OUTLET CONN

Supply only CLAMP SAE J1 508 TYPE SLTB - SAE NO.-40

Supply only VENT HOSE ( EPDM) FOR GENSET.

Supply only GASKET,INTAKE MANIFOLD ASSLY

Supply only TURBOCHARGER / RADIATOR ELBOW

Supply only INTAKE VALVE

Supply only INLET VALVE SEAT

Supply only GUIDE VALVE-INTAKE & EXHAUST

Supply only SEAL VALVE STEM - NEF

Supply only LINER -6 CYLINDER GENSET

Supply only PISTON- 6 Cylinder genset

Supply only PISTON RING SET

Supply only LOWER BEARING SHELL

Supply only UPPER BEARING SHELL

Supply only CYLINDER HEAD GASKETS 1.4(DEF.EPMB)

Supply only in replacement of TURBOCHARGER FOR MECH. GENSET as per cat part No of Mahindra 0305GAV00280N Note for Ser item No 72.01 to 72.30. Spare parts shall be used for 160/125 KVA DG Sets as required.

Servicing/repair of DG set capacity 82.5/62.5 KVA from authorised Service Centre of existing make DG set. Removing tappet cover and cylinder heads from DG set, grinding and polishing of cylinder heads, grinding of valve sets, grinding of inlet and exhaust valve after fixing new seats, calibration of injector, refitting cylinder head and tappet cover, changing of oil and replacement of defective parts including replacing all type filters and testing the DG sets on load. Note: (a) Original Spare parts of existng makes DG set shall be measured and paid separately under respective items as supply only. (b) Labour is included in this job for replacing following parts. (c) Payment should be made after satisfactory completion.

Supply only Service Kit For Elements Of Fuel Filter

Supply only Filter (Engine Oil)

Supply only 4Di Engine Solenoid Electral

Supply only Powerol Super Premium Coolant 5Ltr

Supply only Fan Belt

Supply only Primary Air Element - 75 Hp

Supply only Safety Air Element - 4575Gm

Supply only Emergency Push Button With 1No+1Nc Conta

Supply only Hinge With Temper Proof Hardwar Mak B.P.

Supply only Fuel Spill Pipe

Supply only Fuel Return -Pipe

Supply only Powerol Super Premium Engine Oil 6.75Ltr

Supply only Powerol Super Premium Engine Oil 1 Ltr

Supply only Pipe 4 Cyl. Nef Filter To Fip

Supply only Hose By Pass

Supply only Clip For Radiator(Green Passiv )

Supply only Hose Radiator Outlet

Supply only Hose Radiator Inlet

Supply only Hose Clip Worn Drive

Supply only Hose Oil Cooler

Supply only Hose Waterpump

Supply only Battery Cable +Ve

Supply only Battery Cable -Ve

Supply only Door Lock-Bp Ind.

Supply only Fuel Pump Repair And Calibration Charges

Supply only Injector Reparing & Caliberation

Supply only Canopy Repaire Charges

Supply only Avm Pad Mount (Ph-3E)

Supply only 62.5-75Kva_Ewh_Cpcbii

Supply only Gcu1211 Controller For Retail Dg

Supply only Liner For 88.9 Bore 110 Stroke

Supply only Piston For 88.9 Bore Long Stroke

Supply only Valve- -Exhaust

Supply only Valve Intake-Chrom.Flash-Multi

Supply only Piston Ring Set

Supply only Oil Seal

Supply only Bearing Conrod Cyl Upper & Lower

Supply only Socket Hexagonal Pipe Plug

Supply only Fuel Filter - 6 Cyl - (Sc - Fine)

Supply only Oil Filter 6 Cylinder

Supply only Water Pump 6 Cylinder. Note for Ser item No 73.01 to 73.41. Spare parts shall be used for 82.5/62.5 KVA DG Sets as required.

Servicing/repair of DG set capacity 50/40 KVA from authorised Service Centre of existing make dg set Removing tappet cover and cylinder heads from DG set, grinding and polishing of cylinder heads, grinding of valve sets, grinding of inlet and exhaust valve after fixing new seats, calibration of injector, refitting cylinder head and tappet cover, changing of oil and replacement of defective parts including replacing all type filters and testing the DG sets on load. Note: (a) Original Spare parts of existing make DG set shall be measured and paid separately under respective items as supply only. (b) Labour is included in this job for replacing following parts.

Supply only Service Kit For Elements Of Fuel Filter

Supply only Filter (Engine Oil)

Supply only Nef Engine Solenoid Electral

Supply only Powerol Super Premium Coolant 5Ltr

Supply only Fan Belt

Supply only Primary Air Element - 75 Hp

Supply only Safety Air Element - 4575Gm

Supply only Emergency Push Button With 1No+1Nc Conta

Supply only Hinge With Temper Proof Hardwar Mak B.P.

Supply only Fuel Spill Pipe

Supply only Fuel Return -Pipe

Supply only Powerol Super Premium Engine Oil 6.75Ltr

Supply only Powerol Super Premium Engine Oil 1 Ltr

Supply only Pipe 4 Cyl. Nef Filter To Fip

Supply only Pulley Drive Main

Supply only Hose By Pass

Supply only Clip For Radiator(Green Passiv

Supply only Hose Radiator Outlet

Supply only Hose Radiator Inlet

Supply only Hose Clip Worn Drive

Supply only Hose Oil Cooler

Supply only Hose Waterpump

Supply only Bearing Ball (35X72X17)

Supply only Bearing Ball (35X62X14)

Supply only Oil Seal 1L 41.10X72X8.00

Supply only Gear Hydraulic Pump - Din 9

Supply only Door Lock-Bp Ind.

Supply only Fuel Pump Repair And Calibration Charges

Supply only Injector Reparing & Caliberation

Supply only Battery Cable +Ve

Supply only Battery Cable -Ve

Supply only Controller Dse -4520-R1

Supply only Avr Model No. Mp -05

Supply only Avm Pad Mount (Ph-3E)

Supply only Valve Hsg Cover 4Di

Supply only Valve- -Exhaust

Supply only Valve Intake-Chrom.Flash-Multi

Supply only Turbocharger_3385Tcigm

Supply only Pump Water Assembly (Mdi)

Supply only Hose Pipe To Int.Manifold-P858 H1

Supply only Hose Intercooler Inlet

Supply only Sleeve Cylinder - 432 Cyl Di

Supply only Piston For 88.9 Bore Long Stroke

Supply only Piston Ring Set Nef Indigenize

Supply only Bearing Connecting Rod

Supply only Gasket Cylinder Head- 4 Cyl . Note for Ser item No 74.01 to 74.46. Spare parts shall be used for 50/40 KVA DG Sets as required.

Servicing/ repair of DG set capacity 30/20 KVA from authorised Service Centre of existing make dg set Removing tappet cover and cylinder heads from DG set, grinding and polishing of cylinder heads, grinding of valve sets, grinding of inlet and exhaust valve after fixing new seats, calibration of injector, refitting cylinder head and tappet cover, changing of oil and replacement of defective parts including replacing all type filters and testing the DG sets on load. Note: (a) Original Spare parts of existing make DG set shall be measured and paid separately under respective items as supply only. (b) Labour is included in this job for replacing following parts.

Supply only Avm Pad Mount (Ph-3E)

Supply only Service Kit For Elements Of Fuel Filter

Supply only Filter (Engine Oil)

Supply only Powerol Super Premium Engine Oil 6.75Ltr

Supply only Outer Air Element

Supply only Powerol Super Premium Engine Oil 1 Ltr

Supply only Powerol Super Premium Coolant 1Ltr

Supply only Door Lock-Bp Ind.

Supply only Fuel Pipe

Supply only Fuel Return -Pipe

Supply only Hose Air Intake

Supply only Battery Cable +Ve

Supply only Battery Cable -Ve

Supply only Gcu1211 Controller For Retail Dg

Supply only Fuel Cap With Lock & Key

Supply only Cover Valve Housing 4Di

Supply only Pump Water Assembly (Mdi)

Supply only Gasket Cylinder Head -Imported a

Supply only Gasket Oil Pan - 3 Cyl

Supply only Valve Exhaust

Supply only Valve Intake-Chrom.Flash-Multi

Supply only Sleeve Cylinder - 432 Cyl Di

Supply only Piston For 88.9 Bore Long Stroke

Supply only Piston Ring Set Nef Indigenize

Supply only Bearing Connecting Rod

Supply only Waterpump

Supply only Gasket Cylinder Head- 4 Cyl.

Supply only Turbocharger_3385Tcigm. Note for Ser item No 75.01 to 75.28. Spare parts shall be used for 50/40 KVA DG Sets as required.

Supply only Exide Express 150Ah 12V Battery with charger maintenace free complete all as specified and directed by Engr-in-Charge

Description all as per srl item No 76 here in before but of capacity 130 Ah 12 V .

Description all as per srl item No 76 here in before but of capacity 80/90 Ah 12 V .

Disconnecting and removing the self starter from 20 to 50 KVA DG set and transporting to the workshop & to carry out the repair/overhauling including replacement of the worn out parts and reassembling the same with DG set and testing complete all as specified and directed by Eng-in-Charge.

Description all as per srl item No 79 here in before but of capacity 62.5 to 82.5 KVA.

Description all as per srl item No 79 here in before but of capacity 125 to 160 KVA.

Dismantling/disconnecting the worn out winding of stator of the alternator of capacity 20 to 50 KVA DG set by moving and shifting the stator to the workshop including winding the stator with super enammeled copper conductor wire of existing gauge including insulating material and varnish etc complete all as specified and as directed by Eng-in-Charge. Note:- Winding shall be carried out only in workshop approved by Accepting Officer.

Description all as per srl item No 82 here in before but of capacity 62.5 to 82.5 KVA.

Description all as per srl item No 82 here in before but of capacity 125 to 160 KVA.

Supply and fix in replacement of battery pulse 24 V 32 Ah suitable for DG set omplete all as specified and directed by Eng-in-Charge.

Supply and fix in replacement of battery pulse 12 V 32 Ah suitable for DG set omplete all as specified and directed by Eng-in-Charge.

Material & labour Earthing complete with galvanised iron steel plate electrode 600x600x6 mm burried directly in ground vertically in the pit of depth not less than 2.25 mtr below normal ground level with top edge of the plate not less than 1.5 mtr below normal ground level surrounded from all sides with mixture of charcoal and comman salt in alternate layers and electrode connected to galvanised iron strip 25x4 mm by means of nuts bolts. The earth strip protected by 40 mm light grade GI pipe upto test point complete all as shown in electrical plate NO 3 of SSR part I incl 20 mm bore medium grade GI pipe for waterring incl PCC chamber on the top of the earth complete all as specified and directed. Note: (i) Cost of excavation, earth work, concrete etc is inclusive in the rate quoted for this item. (ii) Earthing shall be tested and payment will be made only after desired results.

Material & labour for attending any type DGs/Starters complaint at Sewage pump houses and rectify the same, rates are also included for replcement of thimbles any type and any size with nut-bolts and spare parts with all connected items all as specified by the Engr-in-Charge. Note: 1. Complaint should be rectify within 04 Hrs otherwise a penalty of 250 Rs per day will be imposed. 2. Spare parts will be measured and paid seperately.

Note:- Amount of credit of Rs. 102911.00 for retrieved materials is mentioned in Schedule of Credit attached in tender documents in pdf form which will be deducted offline while acceptance of tender.

sanjeev enterprises

kulwant singh govt contractor

M/s badrinath Traders