repairs to toilets and bathrooms electrification doors windows paingitn flooring at govt BC College boys hostel payakarao peta mandal in anakapalli district

Dismantling of Old cement mortar plaster inculding all material labour charges etc

Providing and laying five layers waterproofing cum heat reflective treatment over the old / new roof slab/terrace, all as directed by Department Engineer-in-charge with the following specification and should be complain with the following technical parameters for the system - Density: 1.3 Gm/cc, Solids content: 68% ± 2% by weight, Elongation at break ASTM D 638: 200% (for the system), Adhesion to substrate ASTM D 4541: >1.5 N/mm2, Water penetration DIN 1048: no leak at 7 bars, Tear resistance ASTM D 1004-76: 17N/mm2, Tensile strength ASTM D 412- 87:6.0N/mm2 (APSS No. 402)

Ornamental plastering to ceiling with CM (1:3), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete.

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300mm x 300mm and thickness between 7-8 mm and 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC Roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand, water and tiles etc., complete for finished item of work.

Dadooing to walls with glazed red or white full body ceramic wall tiles of size 200 x 300 mm and thickness between 6-8 mm 1st quality, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work.

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. Door Frame section of 63.5x100 MM . The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 no.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member. Providing and fixing 28-30 MM thick solid Wood Polymer Composite (WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work.

Painting to walls with two coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls

Painting to walls with two coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer of exterior grade-2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls.

Painting to iron works with two coats of synthetic enamel paint of approved brand and shade over one coat of red oxide primer of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work

Providing 110 mm Dia ISI marked PVC down water take pipes with socket, 2.5mm thick 4.0 kg/sq.cm pressure of ISI marked including cost of necessary PVC Bends, shoes, iron/ PVC clamps and all other accessories and fixing in position including cost and conveyance of all materials, operational & incidental charges including all labour charges for fixing at site etc., for finished item of work.

Providing 75 mm Dia ISI marked PVC down water take pipes with socket, 2.5mm thick 4.0 kg/sq.cm pressure of ISI marked including cost of necessary PVC Bends, shoes, iron/ PVC clamps and all other accessories and fixing in position including cost and conveyance of all materials, operational & incidental charges including all labour charges for fixing at site etc., for finished item of work.

Supply and Transportation of 1.00 HP Single phase open well submersible motor pumpset confirms to IS 14220 : 1994. Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/PSG/ Aryen Varsha

Supply and Fixing of Premium make CPVC 22.20 mm OD Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2") Ashirvad Flowgurard SDR 11 and SDR 13.5 for Hot and Cold Water including cost and conveyance of all materials, operational & incidental charges including all labour charges for fixing at site etc., for finished item of work.

Supplying & Fixing 12.7mm N.P bib tap Indian make heavy duty including cost and conveyance of all materials, operational & incidental charges including all labour charges for fixing at site etc., for finished item of work.

Supplying & Fixing Indian Pattern White glazed W.C. 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 580 mm long.

Supply and fixing of 20W,2000 lumens T8, , not less than 1100 mm length LED retrofit tube light with aluminium anodised body, input voltage AC 220 -260 Volts with PF>0.9, Surge protection:2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc.,complete. as per IS 10322 (Part 5/ Sec 1)..2012Makes : As per list of recommended brands as category I.

Supply of 48" (1200mm) Sweep star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator. Makes : As per list of recommended brands.

Supply of stepped type electronic Regulator

Labour charges for fixing of ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.

Wiring with 2 runs of 14/0.3mm (1. Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm tick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential buildings.

Supply and run of 1 of 14/0.3mm (1.5 Sq.mm) F.R. P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete.

Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R. P.V.C. insulated flexible copper cable in existing pipe for mains including all labour charges etc., complete.

Supply and fixing of 6A 3 pin wall plug socket with a 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.

Supply and fixing of 16A 3pin flush type switch socket combined (2 in 1) duly recessed in wall with wooden deep box of 6"x8"x21/2" size covered with hylam sheet including earth connections and all labour charges etc., complete.

Supply and fixing of 25mm dia 1.8mm thick P.V.C. pipe (ISI Mark) concealed in wall with all required accessories including masonary work and labour charges etc., complete.

Supply and transportation of 1x60W LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass, supply input voltage 120 - 270V AC, P.F > 0.90, high power LEDs having System Efficacy >= 100 lumens/watt and junction temperature < 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. complete.

Fixing of 60W street light luminaire to the wall with 1.0 Mtr., 25mm dia GI pipe bracket and anti tilting MS flat etc., including giving connections and labour charges etc., complete.

Supplying, fitting and placing MS grilled door, windows including cost and conveyance of all materials and all labour charges etc., complete.

Estimated Contract Value (ECV) put in to Tender in Rs.

The Total Tender Contract Value (ECV) items (01) to (28) of the work "Repairs To Toilets & Bathrooms , Electrification Doors & Windows , Painting , Flooring at Govt . B C College Boys Hostel , Payakaraopeta of Payakaraopeta Mandal in Anakapalli Dist" is for Rs.12,73,506 /- (Rupees Twelve Lakhs Seventy Three Thousand Five Hundred and Six only)

Dismantling of Old cement mortar plaster inculding all material labour charges etc

Providing and laying five layers waterproofing cum heat reflective treatment over the old / new roof slab/terrace, all as directed by Department Engineer-in-charge with the following specification and should be complain with the following technical parameters for the system - Density: 1.3 Gm/cc, Solids content: 68% ± 2% by weight, Elongation at break ASTM D 638: 200% (for the system), Adhesion to substrate ASTM D 4541: >1.5 N/mm2, Water penetration DIN 1048: no leak at 7 bars, Tear resistance ASTM D 1004-76: 17N/mm2, Tensile strength ASTM D 412- 87:6.0N/mm2 (APSS No. 402)

Ornamental plastering to ceiling with CM (1:3), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete.

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300mm x 300mm and thickness between 7-8 mm and 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC Roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand, water and tiles etc., complete for finished item of work.

Dadooing to walls with glazed red or white full body ceramic wall tiles of size 200 x 300 mm and thickness between 6-8 mm 1st quality, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work.

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. Door Frame section of 63.5x100 MM . The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 no.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member. Providing and fixing 28-30 MM thick solid Wood Polymer Composite (WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work.

Painting to walls with two coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls

Painting to walls with two coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer of exterior grade-2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls.

Painting to iron works with two coats of synthetic enamel paint of approved brand and shade over one coat of red oxide primer of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work

Providing 110 mm Dia ISI marked PVC down water take pipes with socket, 2.5mm thick 4.0 kg/sq.cm pressure of ISI marked including cost of necessary PVC Bends, shoes, iron/ PVC clamps and all other accessories and fixing in position including cost and conveyance of all materials, operational & incidental charges including all labour charges for fixing at site etc., for finished item of work.

Providing 75 mm Dia ISI marked PVC down water take pipes with socket, 2.5mm thick 4.0 kg/sq.cm pressure of ISI marked including cost of necessary PVC Bends, shoes, iron/ PVC clamps and all other accessories and fixing in position including cost and conveyance of all materials, operational & incidental charges including all labour charges for fixing at site etc., for finished item of work.

Supply and Transportation of 1.00 HP Single phase open well submersible motor pumpset confirms to IS 14220 : 1994. Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/PSG/ Aryen Varsha

Supply and Fixing of Premium make CPVC 22.20 mm OD Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2") Ashirvad Flowgurard SDR 11 and SDR 13.5 for Hot and Cold Water including cost and conveyance of all materials, operational & incidental charges including all labour charges for fixing at site etc., for finished item of work.

Supplying & Fixing 12.7mm N.P bib tap Indian make heavy duty including cost and conveyance of all materials, operational & incidental charges including all labour charges for fixing at site etc., for finished item of work.

Supplying & Fixing Indian Pattern White glazed W.C. 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 580 mm long.

Supply and fixing of 20W,2000 lumens T8, , not less than 1100 mm length LED retrofit tube light with aluminium anodised body, input voltage AC 220 -260 Volts with PF>0.9, Surge protection:2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc.,complete. as per IS 10322 (Part 5/ Sec 1)..2012Makes : As per list of recommended brands as category I.

Supply of 48" (1200mm) Sweep star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator. Makes : As per list of recommended brands.

Supply of stepped type electronic Regulator

Labour charges for fixing of ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.

Wiring with 2 runs of 14/0.3mm (1. Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm tick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential buildings.

Supply and run of 1 of 14/0.3mm (1.5 Sq.mm) F.R. P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete.

Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R. P.V.C. insulated flexible copper cable in existing pipe for mains including all labour charges etc., complete.

Supply and fixing of 6A 3 pin wall plug socket with a 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.

Supply and fixing of 16A 3pin flush type switch socket combined (2 in 1) duly recessed in wall with wooden deep box of 6"x8"x21/2" size covered with hylam sheet including earth connections and all labour charges etc., complete.

Supply and fixing of 25mm dia 1.8mm thick P.V.C. pipe (ISI Mark) concealed in wall with all required accessories including masonary work and labour charges etc., complete.

Supply and transportation of 1x60W LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass, supply input voltage 120 - 270V AC, P.F > 0.90, high power LEDs having System Efficacy >= 100 lumens/watt and junction temperature < 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. complete.

Fixing of 60W street light luminaire to the wall with 1.0 Mtr., 25mm dia GI pipe bracket and anti tilting MS flat etc., including giving connections and labour charges etc., complete.

Supplying, fitting and placing MS grilled door, windows including cost and conveyance of all materials and all labour charges etc., complete.