Sardar Sarovar (Narmada) Project

Item Rate in

specification and reference to book of Quantity Unit Amount

No. figures

specifications)

Providing and supplying in standard length ISI

mark rigid unplasticised PVC pipes suitable for

potable water with ring fit joint including cost

of rings, as per IS specification no. 4985/1988

Including all local and central taxes.

transportation, freight charges, octrol,

Inspection charges, loading, unloading,

conveyance to the departmental stores and

Including cost of jointing meterial etc.

complete. Test pressure 4 kg/cm2

a) 250 mm Dia 345.00 Rmt 699.00

b) 280 mm Dia 650.00 Rmt 886.00

Lowering, laying, fixing and jointing

PVC/uPVC/CPVC pipes and specials of

following class and diameter including cost of

conveyance from stores to site of works

including cost of labour, materíal, cement

solvent, giving satisfactory hydraulic testing as

per ISI code.

a) 250 mm Dia 345.00 Rmt 51.00

b) 280 mm Dia 650.00 Rmt 60.00

Excavation in all sort of strata and formations

incl. depositing the unuseful excavated stuff as

and where directed incl sorting and stacking

3 useful materials as directed upto 30 mt lead 1000.00 Cum. 167.00

etc.complete incl. dewatering and backfilling..(

Depth 0 TO 3.0 mt) (For all type canal &

foundation trenches of C.D. works)

Prov. & Laying in position controlled cement

concrete using cement, sand and crushed

aggregate by machine mix for R.C.C/CC work

incl. necessary formworks centering

4 scaffolding compaction by mechanical 2.21 Cum. 3822.00

vibrator,curing as directed with all lead & lift

etc complete Excluding the cost of

reinforcement. 2/A) Concrete grade M-15 and

Prov. and Laying in position Controlled cement

concrete using cement, sand and crushed

aggregate by mass and machine mix for

R.C.C/CC work including necessary formworks

centering scaffolding compaction by

mechanical vibrator,curing as directed with all

lead & lift etc complete Excluding the cost of

reinforcement.

FOR SLABS AND LOFTS

14/A) Concrete grade M-25 and MSA-20mm

Providing,Cutting,bending,binding and fixing in

position as per drawing TMT

bar,reinforcement for R.C.C. works and anchor

bars incl cost of black annelead 16 to 18 BWG

M.S wire etc. completed with all lead and lift

Providing and supplying ISI mark CI D/F Sluice

Valves as per IS:14846 (Latest Edition) of

following class and diameter including all

7 taxes, insurance, transportation, freight

charges, octroi, inspection charges, loading,

unloading. conveyance to departmental stores,

stacking etc complete

a) 250 mm 6.00 Each 16866.00

b) 800 mm 1.00 Each 451389.00

Providing, supplying&Fixing of T-Valves

atTurnout wells where subminors are executed

by using uPVCpipes, Including all necessary

jointing materials such as uPVCpipe of 160 mm

dia.,Elbow,PVC TEE (fo rmaking offtakepoint

from uPVC subminors), nuts, bolts, rubber ring,

double flanged GI pipe of required length or

UPVCunion/ flange, includingblind flange etc.

complete (As per old taxation process before

applicable of G.S.T.)

(a) on 250 mm Dia. Sub-Minors 10.00 Each 13914.85

TOTAL=

I/We am/are willing to carry out the work at… ....................... % above/below percent(Should

be written in figures and words) of the estimated rate mentioned above. Amount of my /our

tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

(B) For Item Rate Tender (For above INR 50 Cr.):

Item Description of Item Quantity Unit Rate Amount

No (with brief specification

and reference to book of In In

specifications) figures Words

(A) Total Tendered Amount

(B) Rebate on above tendered amount (if any) % (in figure) ………………………………

(in words)………………………………………………….………………………………………………...

(C)Net Tendered Amount (A-B) (in figure) ………………………………

(in words)………………………………………………….………………………………………………...

1 The Contractor shall exhibit a board with detailed specification and details of work as

directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payment of bills

4 In all P.C.C./R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as

per vernacular office letter no. 04 of 2024, Dt. 20/01/2024 of The Chief Engineer, Quality

Control (SSNNL) as stated in S.O.R. therefore in P.C.C./R.C.C. items where there is a change

as per Nominal mix the cost of difference of cement consumption have been deducted from the

rate of original item at the rate of input rate (i.e. 5448.53 Rs / MT for OPC) in all the tender.