38/2023-24/EDCR Increasing load capacity of overloaded Transformer, replacement of VCB, Jarjar wire construction of line under Business Plan, EDD-Bilaspur, Rampur.

Amount

Carriage of the following material from Store Centre, Rampur to work site including loading & unloading.

33 KV VCB 1250 Amp

Control Pannal I/C for 33 KV Double T/F

33 KV CTR 200/100/1-1A

STP 11 Mtr Long

PCC 8.5 Mtr Long

11/0.4 KVA T/F 250 KVA

11/0.4 KVA T/F 100 KVA

ACSR Rabbit (In Mtr)

11 KV XLPE Cable 3*185 sq mm

ACSR Weasal Conductor

LT PVC Cable 3.5*400 sq mm

LT PVC Cable 3.5*240 sq mm

CABLE AL. 3X300 SQ.MM. XLPE 11 KV

Polymeric 11 KV Pin Insulator

Polymeric 11 KV Disc Insulator

33 KV VCB 1250 amp set (Recived Back Site to Store)

11/0.4 KV 100 KVA T/F(Recived Back Site to Store)

33 kv CTR 200/100/1-1A (Recived Back Site to Store)

33 KV Bus Isolator 800 A (Recived Back Site to Store)

Dismantling of HT & LT connection & replace of follwoing capacity T/F from substation double poles/plinth by Healthy transformer(including connection) and loading and unloading with associated work at both ends within 70 kms.

overloaded 100 KVA trasnformer

Installing of Healty Transformer, connection HT & LT of follwoing capacity T/F at substation Single Pole/ double poles/plinth by Healthy transformer(including connection) and loading and unloading with associated work at both ends within 70 kms.

Increasing load capacity of overloaded by separate 100 KVA trasnformer

Increasing load capacity of overloaded by separate 250 KVA trasnformer

a) Single support Excavation of foundation Pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole), providing and laying of stone pad (300x300x75 mm) in the Bottom of the pit. Erection of support(pole) complete with fixing of 11 KV V-type cross-Arms and other accessories by providing clamps made of MS flat of size 65x65xc6 mm with Nuts & Bolts, as per RESPO Norms.

STP 11 Mtr long

8.5 Mtr long PCC Pole

b) Double pole structure Excavation of foundation pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole)Erection of support(pole) complete with providing and fixing of all clamps made of MS flat of size 75x8 mm. an other accessories . The work includes fabrication work and fixing of cross bracing sets 3.5 Mtr from MS Angle 65x65x6 mm/50x50x6 mm. The work includes cutting holes and providing MS Bolts of 16x40 mm size in the middle of the cross bracing with 1 No. sparing washer of proper size.

8.5 Mtr long PCC Pole

Grouting of support in CC 1:4:8(cement, sand & 40 mm. brick ballast) Grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with CC 1:3:6 (cement, course sand and stone grit) with muffing. The work includes back filling and proper ramming etc. a) Single support

STP 11 Mtr long

8.5 Mtr long PCC Pole

b) Double pole structure

8.5 Mtr long PCC Pole

Providing & Grouting of Stay Rods(20x1800)mm including all work of excavation, cement concrete in size of (0.60x0.60x0.30)M in the ratio of 1:4:8(cement, sand, 40mm brick ballast) including back filling of soil and proper ramming etc.

Providing and Fixing, tightening and nozelling of stay wire with stay rod with the pole of required tension by providing stay clamps.

Earthing of support with MS Earth Rod of (20x2500)mm long including excavation of pit and driving MS Rod 3.0 M apart from support and 0.5 M below the ground level and connecting below the earth electrodes with the help of GI wire No. 8SWG and earthing lugs (Earting complete( Rod and wire) will be provide by the contractor)

fixing of 11 KV Pin Insulator with Pin as per RESPO Norms and as per direction of Supervising Engineer.

fixing of 11 KV Disc Insulator with Fitting as per RESPO Norms and as per direction of Supervising Engineer.

laying ,stringing and binding of ACSR Weasal Conductor as per RESPO Norms and as per direction of Supervising Engineer.

laying ,stringing and binding of ACSR Rabbit Conductor as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of 11 kvXLPE cable 3*300 sq mm as per RESPO Norms and as per direction of Supervising Engineer.

laying 11 kvXLPE cable 3.5*185 sq mm as per RESPO Norms and as per direction of Supervising Engineer.

laying Underground 11 kvXLPE cable 3.5*185 sq mm as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding LT PVC Cable 3.5*400 sq mm per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of LT PVC Cable 3.5*240 sq mmSqmm per RESPO Norms and as per direction of Supervising Engineer.

Dismentling old 33 KV VCB 1250 Amp and Installing of 33 KV VCB 1250 Amp as per RESPO Norms and as per direction of Supervising Engineer.

Installing of Control Pannal I/C for 33 KV Double T/F as per RESPO Norms and as per direction of Supervising Engineer.

Dismentling old and jarjar CTR 33 KV CTR 200/100/1-1A and Installing of 33 KV CTR 200/100/1-1A as per RESPO Norms and as per direction of Supervising Engineer.

Providing and Installing of 33 KV Bus Isolator 800 A per RESPO Norms and as per direction of Supervising Engineer.

Providing and Installing lightening arrstor 33 KV per RESPO Norms and as per direction of Supervising Engineer.

Dismentaling of old damaged 33 KV Bus isolator 800 A as per RESPO Norms and as per direction of Supervising Engineer.

Construction of plinth for 250 KVA Transformer 2x2x1.5 M with fencing as per RESPO Norms and as per direction of Supervising Engineer (Material for plint and fencing will be provide by the Contractor)

Providing and laying of Control Cable 4*2.5 sq mm as per RESPO Norms and as per direction of Supervising Engineer

Providing and laying of Control Cable 2*2.5 sq mm as per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Stone pad

Providing and fixing 11 KV X Arm MS Angle 65*65*6 mm

Providing and fixing MS Channal (Dropper) 100*20*2028 mm

Providing and fixing MS Channal(Top) 125*65*2240 mm

Providing and fixing MS Angle 65*65*6*1200 mm with clamp & Bolt and Nut(T/F Base)

Providing and fixing MS Angle 65*65*6*1700 mm with clamp & Bolt and Nut(T/F Base)

Providing and fixing 11 KV cable jointing kit (3x300 sqmm)

Providing and fixing 11 KV cable jointing kit (3x185 sqmm)

Providing and fixing T-channel with Nuts and Bolts

Providing and fixing F-Bracket with Nuts and Bolts

Providing and fixing Clamp with Nut bolts

Providing and fixing Clamp with Nut bolts T/F base

Providing and fixing Clamp with nut bolts for Holding X- Arms

Providing and fixing Danger Board with Fixing Clamp

Providing and fixing GI wire 8 SWG

Providing and fixing Nut and bolt (off size)

Providing Red Oxiding and Painting

Providing Enamel paint(silver colour) and Painting

M/S MEGHA ENTERPRISES