Loading…
Loading…
Tender Value
₹15.5 L
EMD Value
₹38,800
Closing Date
14 Aug 2026, 3:00 pmClosed
Divisional Engineer-(Elec-I), Tirupati
Tirupathi
Providing IEI & EEI to the Balance work of Re-construction of Sri Venkateswara swamy Temple at Yanam in Puducherry, UT
969818
108/DE(Elec.)-I/TTD/TPT/2026-27
OPEN - NCB
Electrical Works
TIRUPATHI
7 documents required · 7 mandatory
₹550
₹38,800
30 Jul 2026
30 Jul 2026
30 Jul 2026
Supply and Fixing of 32 X 12.5 mm P.V.C. Mini trunking with all accessories fixing on surface walls for surface wiring on Brick / stone walls, RCC roofings, Trusses channels including all labour charges etc., complete. (the rate for plastic frame anchor with countersunk, Tape, Sealant and adhesive for fixing of PVC trunking will be paid Separately) Make: Legrand / OBO Bettermann
Supply and Fixing of 80 X 50 mm P.V.C. trunking with all accessories fixing on surface walls for surface wiring on Brick / stone walls, RCC roofings, Trusses channels including all labour charges etc., complete. (the rate for plastic frame anchor with countersunk, Tape, Sealant and adhesive for fixing of PVC trunking will be paid Separately) Make: Legrand / OBO Bettermann
Supply and Fixing of ISI Mark 25mm outer dia medium grade (1.80mm thickness) with IS:9537 part -3 P.V.C. pipe with all accessories fixing on chromium plated metallic base saddles for surface wiring on Brick / stone walls, RCC roofings, Trusses, channels including all labour charges etc., complete. (If PVC Pipes are fixed on Trusses / Channels with MS Clamps, the rate for MS Clamps will be paid Separately) Makes: Sudhakar / Finolex / Polycab / Kumar / AKG / Indian-tubes / GM / Anchor / Nandi / Polyline / Gold Medal
Supply and Fixing of ISI mark 25mm outer dia medium grade (1.80mm thickness) with IS:9537 part -3 P.V.C. pipe for concealed wiring in new / existing brick building, walls, columns, beams duly cutting them to the required depth wherever necessary and fixing the pipes and specials with nails and plastering neatly with cement mortar and colour washing to match the finished surface and masonry work for light, fan and separate plug point including all labour charges etc., complete. Makes: Sudhakar / Finolex / Polycab / Kumar / AKG / Indian-tubes / GM / Anchor / Nandi / Polyline / Gold Medal
Supply and wiring with 2 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping with pilot ceiling rose, 6 Amp 1 Way Module Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Non-Residential Buildings. Grade-A: Wire Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI Grade-A: Modular Switch Makes: Legrand Arteor / Schneider Zen cello / Gold Medal / GIFA / L&T englaze / Crabtree - Murano / Amare / Ducor / GM Four-Five
Supply and wiring with 2 run of 14 / 0.3mm (1.0Sqmm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping without ceiling rose, 6 Amp 1 Way Module Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Non-Residential Buildings. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI Grade-A: Modular Switch Makes: LegrandArteor / Schneider Zen cello / Goldmendal / GIFA / L&T englaze / Crabtree- Murano / Amare / Ducor / GM Four-Five
Supply and run of 3 wire of 36/0.3mm (2.5 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI
Supply and run of 3 wire of 56/0.3mm (4.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI
Supply and run of 3 wire of 84/0.3mm (6.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe / PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI
Supply and run of 5 wire of 140/0.3mm (10 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI
Supply and fixing of 6 /10 Amps 1 way 1 module Modular Switch on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five
Supply and fixing of 6 /10 Amps 3 / 2 pin 2 module Modular Socket with shutter on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five
Supply and fixing of 16 /20 Amps 1 Way 1 Module Modular Switch on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five
Supply and fixing of 20 Amps 2 Module Modular Socket with Shutter on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five
Supply and fixing of 5/8" Angle / Batten Holder on the existing junction boxes/ T.W Board etc. and giving necessary connections. Makes: Anchor / Gold medal (Olive) / GM (G Home) / Havells ( Reo)
Supply and transportation of 16 Sq.mm 4 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.
Supply and transportation of 95 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.
Supply and fixing of 12 Way SP & N Distribution board as per IS 8623; IS 13032; IEC 61439-3. with IP-30 protection (Metal door) firmly concealed in the wall with neat plastering etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)
Supply and fixing of 4 Way VTPN D.Bs suitable for accomodating 125A / 160A 4 Pole MCCB as incomer and TP/SP MCBs as outgoing with IP-43 protection as per IS 8623; IS 13032; IEC 61439-3. (Metal door) firmly on the surface of the wall etc., complete. [Excluding Incomer & Outgoings] Grade-A: Make: Legrand (Ekinox 3)/Schneider-Acti9/Hager- Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)
Supply and fixing of 250A 4 Pole MCCB, Adjustable Confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 36/35 KA, with thermal magnetic release in the existing board including internal connections and Labour charges etc., complete. Grade-A: Makes: Legrand DPX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).
supply and fixing of 40 to 63 Amp TP MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).
Supply and fixing of 6 to 32 Amps range S.P MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).
Supply and fixing of 40 to 63 Amp SPN/DP MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).
Supply & fixing of 1 1/4" dia 'B' class GI pipe not exceeding 1.5Mtr long with necessary bending (120° to 135°) to the wall or to the pole as directed during execution duly grouting 2 Nos. of MS angles of 35x35x5mm having length 20Cm (grouted portion of MS angle into the wall 7.5cm) and fixing with 2 Nos. of MS clamps fabricated with 25mmx3mm MS flat with suitable holes and 4 Nos. of 3/8"x2" MS bolts, nuts & washers for fixing on the wall / 2 Nos. of suitable MS clamps with bolts, nuts for fixing to the pole etc., complete. A 16Amp fuse unit is to be fixed to the MS angle / clamp and giving necessary connections with 14/0.3mm PVC copper flexible wire from pole to the fuse unit and to the fitting or from Ceiling rose in the building to the fuse unit and to the fitting with link clips etc., and the GI pipe has to be painted with two coats of enamel grey paint over one coat of red oxide paint. Fixing charges including the cost of MS angle, MS clamps, bending of pipe, bolts, nuts, fuse units etc.,
Providing of Independent Chemical Earthing after excavating an earth pit of size1.5 m X 1.2 m X 3 m (Top 1.50 m X 1.20 m X 0.9m & bottom 1.20 m X 1.20 m X 2.10 m) with the following specification:
(a) The Earth Electrode, 40mm dia, wall thickness 3.25 mm, terminal Size 25x8 mm, terminal hole dia 12 mm, 3 meters long, galvanized, including 2 bags (50Kg to a bag) of Earth Life Compound, as per IS 3043, Base Metal: IS marked branded mild steel pipes. Makes: Potential / Shake Hands /Mars /Tirumala/Arshlok earthing.
b) The Earth Electrode shall be inserted into the ground for 2.75 Mtrs. Below the inspection chamber bottom 300mm all around this Earth Electrode shall be covered with 50 Kgs. Of Earth Life Compound.
(c) The excavated gap shall be back filled with excavated earth, and shall be properly consolidated with water.
(d) The top 0.25 m of Earth pipe shall be exposed into inspection chamber of Hume pipe . The all around inspection chamber shall be providied with 18" dia hume pipe. Earth connections shall be given to the Earth Elecrods with bolts, nuts & washers.
(e) A 65 mm dia PVC conduit is to be embeded through hume pipe at one side, to lay the Earth from the Earth bus to the Electrode through the PVC conduit and after laying the Earth, the pit entry PVC conduit is to be sealed with Bitumen compound.
(f) Necessary Meggar testing is to be done in the presence of the concerned Engineers, and the reading should be as per IE standards.
Supply and run of ' 8 ' SWG Copper wire for earth electrode to required places by Surface in walls, flooring including cost of all accessories and giving necessary connection with 3/8"x2" Brass Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete.
Supply of 48” (1200 mm) BLDC (Brush less Direct Current) Ceiling Fan Sweep : 1200 mm (48"), Rated Voltage : 230 V , Frequency : 48 - 52 Hz, Operating Voltage: 140-290v single phase AC. Power Factor : 0.99, Air Delivery : 235 CMM Rated Power : 28 W - 30 W, Motor Speed : 350 RPM with speed control, Bearing : Double Ball Bearing Down Rod Size :- 260 mm, Service Value :- 8.2 CMM/W, Operating temperature within 2 degree of ambient warranty :- 3 years on site, Speed Control: Regulator Compatible Conforming as per IS 374-2019 Latest. Make: TTD approved Brands Colour :- White / Ivory
Fixing of Ceiling fan including transportation and giving connections with twin core wire etc., complete.
Supply of 16" (400mm) Wall mounted Fan. Makes: Crompton High Flow / Bajaj Elite / Havells Swing Premia gold / Orient Wall 45/Halonix Krypton / G.M. (Bolt)
Fixing of Wall mounting fan / Air circulator 9" to 18" on wall with 3/8" x 4" bolts, nut & washers and giving connections in the existing plug & socket board / light point e.t.c, complete.
Supply of 16" (400mm) Pedestal Fan. Makes: Crompton PF High Flow LG / Bajaj Spectrum / Havells Swing / Orient Stand 32 / Halonix Krypton / Polycab / G.M. (Bolt)
Supply of 15" (375mm) ISI, 900 RPM Heavy duty exhaust fan with metallic blades with Mark. Makes: Crompton / Almounard / Havells Turbo Force/Halonix Krypton
Fixing of given (9" to 24") Exhaust fan on to the existing hole and giving necessary connections complete.
Supply and transportation of following LED Flood light Luminaire made of pressure diecast alluminium housing with powder coated,having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's System efficacy >100lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, Driver surge protection 4KV, In house additional Surge protection ≥ 10KV with wide/ Narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K, minimum CRI>70, etc., complete a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture / Crompton/ Bajaj /Greenlites / Havells/ Capart (Premium) /Halonix / Polycab /Keselec/ HPL/ Jaquar/ Eveready / Surya (Lumasmax / O Flood) / FortuneArrt(Fin) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG
Fixing of M.V / S.V / M.H luminaire / Halogen fitting on wall / pole cross arm / channel / stem pipe etc., including all labour charges and giving connections etc., complete.
Fixing of given Flood Light / Halogen fitting on wall / beams etc.,with 10mm x 75mm Anchor fasteners including all labour charges and giving connections etc., complete.
Supply of 75W LED Day light integral IP 66 street light / Road light fitting with pressure diecast aluminium body suitable for mounting to the existing poles with 50mm to 60mm outer dia bracket (adjustable stem pipe) with suitable capacity of isolation constant current driver. The luminaire shall be with Lense for distribution of lighting and suitable to operate on 230V, 50 Hz AC supply as per the following specification. Make: Philips / Osram / Havells / Crompton greaves / GE / Orkus 1. Output Luminious : 7500 Lumens + 5% 2. IP grade : IP 66 3. Material for glass : toughned glass 4. Meterial for LED engine: metal core PCB 5. Working temperature: 0 C to 50 C
6. Working humidity : 10% to 90% relative humidity 7. Working life: > 50000 hours 8. LED make: NICHIA (Japan) / OSRAM (German) / PHILIPS LIMITED / CREE (USA) / BRIDGELUX (USA) / SEOL / LEDNIM /EVERLIGHT / LED /EPISTAR / EDISON 9. LED operating current: 700mA 10. LED efficiency: >135 lm/w +/-5% 11. Luminaire effiency: Not less than 100 Lumens / W
12. Total system wattage:75W +/-5% 13. CCT: 5500K-6500K 14. CRI : >70 15. Input voltage and frequency :230-240V AC, 50 Hz +/- 3 Hz 16. Operating voltage: 140V-270V AC universal Electronic Driver
17. Input current : ≥300 mA 18. Power factor: >0.95 19. Driver efficiency : >90% 20. THD : < 10% 21. LED drive current : 700mA 22. IEC/ IS Applicable for Luminaire: IEC60529 Waranty : 5 Years
Supply and Fixing of 4 feet T5, 18W LED Batten type fitting with Internal driver with Polycarbonate housing & PC diffuser suitable to operate on 230V AC, 50 Hz power supply as per the following specification. Make: Philips / Osram / Havells / Crompton Greaves / GE / Orkus. Specifications: 1. Input Power: 18W ±5% 2. Input Voltage and Frequency: 230V ±5% AC, 50Hz. 3. Power factor : >0.95 4. THD %: <15% 5. Operating Voltage: 140 - 270 VAC 6. Surge Protection: ≥ 2.5 kV 7. LED make: Nichia (Japan) / Osram (German) / Philips Lumiled / Cree (USA) / Bridgelux (USA) / Seoul / Lednim / Everlight / Epistar / Edison. 8. Luminous Flux (Lumen): 1800 ± 5% 9. Luminous Efficiency (LM/W): 100 ± 5% 10. Colour Temperature (K): 5500K to 6500K 11. CRI: ≥ 80 12. LED Beam Angle : >150º 13. IP Grade: IP20 Warranty: 5 Years.
Supply and fixing of suitable out door type feeder piller box made with 14 SWG CRCA sheet after 7 tank process including S & F of Legrand / Schnieder / L&T make 40-63A FP MCB, 6 Nos SP MCB's, din chanel, bus bars, 6 Sqmm 3 core copper cable for internal wiring, contactor, connectors and provision for energy meter etc., complete for finished item of work.
Laying of U.G cables upto 50 Sq.mm and back filling of trench including labour charges etc., complete.
Laying of U.G cables size from 70 Sq.mm to 150 sq.mm and back filling of trench including labour charges etc., complete.
Supply and fixing of 2/3 Module Plastic surface box with Modular cover plate with frame on to the wall with all required accessories and all labour charges etc., complete. Make : Legrand Arteor/ Legrand Mosaic/ North west/ M.K./GM /L&T.
Suppty and fixing of 8 / 9 Module Horizontal / vertical plastic surface box with Modular cover plate with frame to the wall with all required accessories and all labour charges etc., complete. Make : Legrand Arteor/ Legrand Mosaic/ North west/ M.K./GM /L&T.
Suppty and fixing of 12 Module Horizontal / vertical plastic surface box with Modular cover plate with frame to the wall with all required accessories and all labour charges etc., complete. Make : Legrand Arteor/ Legrand Mosaic/ North west/ M.K./GM /L&T.
Supply and run of 4 core 4.0 Sq. mm FRLS PVC Insulated round copper cable of 1100V grade as per IS:694 / 1990 specification along with No.10 SWG GI bearer wire through PVC cleats / Porcelain reel insulators including fixing of suitable PVC pipes with bends and eye bolts and giving necessary connections including all labour charges etc., complete for service mains. Copper Wire Makes: Finelox / RR Kabel / Havells / Polycab / L&T / KEI PVC Pipe Makes: Sudhakar / Finolex / Polycab / Kumar / AKG / Indian-tubes / GM / Anchor / Nandi / Goldmedal / Polyline
Supply and fixing of 100 W Fan Step Regulator of 2 Module on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
108 Yanam IEI & EEI.doc
TENDER_DOCUMENT • 0.69 MB
108 BOQ.xls
TENDER_DOCUMENT • 2.91 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .