SPECIAL REPAIR TO BLDG NO T 128 01 TO 04 OR MD ACCN PF 611 EME BN AND CERTAIN SANCTIONED WORKS AT AHMEDABAD CANTT

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specially provided for.

Roughening the surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust and brushing neat cement slurry with 3.0 kg of cement per Sqm complete all as specified and directed

M&L for 25 mm thick PCC type B-0 (1:2:4) using 12.5 mm aggregate as in floor finished even and rough to received top layer or tiling complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for non skid ceramic (colored) tile, 7 to 8 mm thick as in floor area of each tile exceeding 0.11 Sqm but n exceeding 0 .18 Sqm , set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed.

M&L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick as in dado or skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No 8 above but vertical surface, set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified and directed.

M&L machine cut Kota stone slab 18-20 mm thick as in flooring or trades of step incl half round moulding over and including screed bed 15 mm thick in CM (1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified.

M&L machine cut Kota stone slab 18-20 mm thick as in riser to step including 10 mm thick rendring in CM (1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified.

M&L Udaipur Green marble 20 mm thick laid and jointed with grey cement slurry over and including 20 mm thick CM 1:6 screed bed complete all as specified and directed.

Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed

S & F 500 ltrs rotational moulded polyethelene water storage tanks (cyclindrical vertical with closed top) incl connecting up pipes securing access covers etc complete all as specified and directed.

S&F 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth complete all as specified and directed

Taking up or down GI tubing 15mm bore pipe and connection including cleaning for refixing or removal from site as directed

S&F 15mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.

Refixing 15mm old steel tubing and connecting in new or old position (walls, ceiling, floors)etc, complete all as specified and directed.

Taking up or down GI tubing 20mm bore pipe and connection including cleaning for refixing or removal from site as directed

S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.

Refixing 20mm old steel tubing and connecting in new or old position (walls, ceiling, floors)etc, complete all as specified and directed.

Taking down cement plaster on wall of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.

M&L rendering 15 mm thick in CM (1:4) on brick work or concrete surfaces mixed with water proofing compound incl chajja, facia etc, finished the surfaces even and smooth without using extra cement complete all as specified.( WPC mesured separetly)

M&L for applying two coats of cement base paint on new plastered surfaces of wall over a coat of primer complete all as specified and as directed.

M&L for complete removal of existing treatment and applying two coats of cement base paint on old plastered surfaces over one coat of primer complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:6 on other than fair face of brick work or concrete surface complete all as specified and directed.

M&L for prepartion of newly plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying cement based wall putty 2 to 3mm thick to wall surface complete all as specified and directed.

M&L for prepartion of old plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying cement based wall putty 2 to 3mm thick to wall surface complete all as specified and directed.

M&L preparing newly plastered or unplastered surface of wall and applying three coats of white washing complete all as specified and directed.

M&L complete removal of existing treatment and applying two coat of white washing on wall surface complete all as specified and directed.

M&L for removing loose and broken concrete by chiselling/picking etc upto a depth of 10 to 15 mm from floor/beam/roof slab and simillar structural members cleaning the dismantaled portion with wire brush etc and remove debris to a distance not exc 50 m complete all as specifed.

M&L for application of high build polymer modified cement mortar (1:2:5) mixed with 3 kg SBR per bag to ceiling surfaces 10 to 20 mm thick in two layers to surfaces over a coat of bonding agent Nito Bond SBR @ (1 ltr SBR + 1 ltr water + 3 Kgs cement) applied as per manufactures instruction.

M&L for spraying curing compound as per manufactures instruction on freshly cast concrete surface all as specified Make: Concur WB white of Fosroc

M&L for rendering 5mm thick plastering in CM (1:3) on ceiling, soffits of slabs, chajjas, columns and beams etc and finished the plastered surface even and smooth without using extra cement complete all as specified and directed.

M&L preparing newly plastered or unplastered surface of ceiling and applying three coats of white washing complete all as specified and directed.

M&L complete removal of existing treatment of ceiling and applying two coats of white washing complete all as specified and directed.

Demolition of brick work built in cement mortar of any description including all quoins, arches, fillars etc complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks, straight or curved on plan and any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

M&L brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete all as specified and directed.

M & L for providing plain cement concrete type B-1, 1:2:4, (using 20 mm graded stone aggregate), as in benching, copings, bed block for filing hollow space of steel chowkhats, including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

M&L for 15mm thick rendering on vertical side of sunken floor of brick/ concrete surfaces in CM (1:3) mixed with water proofing compound as per manufacture instrution and finished even and smooth without using extra cement complete all as specified. (Note : WPC shall be measured and paid seperately)

M&L for PCC 1:1½:3 nominal mix type A-0 using 12.5 mm graded stone aggregate mixed with water proofing compound as per manufacture instruction on bottom of sunken portion with slope towards spout including applying two coat of polymeric base chemical in the top surface of PCC and side of sunken portion complete all as specified. (Note : WPC shall be measured and paid seperately)

M&L for PCC 1:5:10 type E-2 (using 40 mm graded brick aggregate) as in lean concrete in sunken floors complete all as specified and directed.

S&F 32mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall for spout etc complete including taking down old pipe complete all as specified and as directed.

Supply and fixed in repairs sinks with drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm all complete as specified and as directed.

S&F in repair 0.63 mm thick stainless steel plate rack of size 31"x42"x10" complete all as specified and directed. (Make - Blue Star or equivalent make)

S&F in repairs vitreous china wash basin, white, flat back, size 550x400m excluding taps, waste , chain & plug & porcelain stopper including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete all as specified and directed

S&F in repair 10 ltr capacity PVC flushing cistern low level white colour incl PVC connection PVC flush pipe of reqd length complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rest complete incl provision of lime concrete bedding.

S&F in repairs Bib taps (long body )fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected.

S & F in repair 15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and directed

Supply only 15 mm bore pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified.

S&F in repair 15 mm bore angle cock with flange complete all as specified and direcrted.

S&F in repairs stop valves fancy type cast copper alloy, chromium plated with long shank and cup (concealed type) for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union complete all as specified and as directed.

S & F in repairs 600 mm long tubular towel rail of PTMT (minimum weight 190 gram) fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and directed.

S&F in repair brass CP shower rose 125 mm size with or without swivel joint and fixing to steel pipe

S & F in repair Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms)

S& F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S& F gun metal globe or gate valve 20 mm dia with iron wheel head screwed both ends in iron pipe complete all as specified and directed.

S& F in repair for 100mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S & F in repair 40mm (HDPE) of pressure rating 6 Kg/f/CM2 fixed complete to walls ceilings or in floors etc

Dismaintling of 75mm to 100mm bore cast iron pipe jointed in cement mortar and taking out of trenches or any description and any position as required complete all as specified and directed.

S&F of 100mm bore cast iron soil , waste and vent pipe, sand cast, in any length , with or without ears , with cement joints in cement sand mortar 1:1 with spun yarn fixed to wall complete all as specified and directed.

Fixing only of 100mm bore cast iron soil , waste and vent pipe, sand cast, in any length , with or without ears , with cement joints in cement sand mortar 1:1 with spun yarn fixed to wall complete all as specified and directed.

S & F cast iron soil, waste and vent pipe, sand cast 75mm bore in any length, with or without ears, with cement joints in CM 1:1 with spun yarn fixed to over septic tank or soakage well complete all as specified and directed

S&F of 100 mm bore cast iron bend (any Radius) dismantling piece or lager (Large bore measured) complete all as specifed and directed.

S&F of 100 mm bore cast iron branch pipe , single (equal or unequal), ordinary or inverted (Spigot or Socket type ) or with parallel branches complete alla specied and directed.

S&F of 75 mm bore cast iron bend (any Radius) dismantling piece or lager (Large bore measured) complete all as specifed and directed.

S&F of 100 mm bore cast iron cast iron cowls complete all as specifed and directed.

Taking down chowkat with shutter exc 1.5 sqm and n. exc. 4.00sqm each (without taking off shutter from the frame) and removing from site.

Taking down chowkat with shutter n. exc. 1.5sqm each (without taking off shutter from the Frame).

Refixing shutter of any description but exc 1 sqm and n. exc. 2 sqm each in same opeining etc complete all as specified and directed.

M&L pressed steel frames of size 125x60 mm for door with one or more rebates incl necessary fittings, lugs, hinges, lock strike plate, flat iron hold fast etc complete as specified & as directed.

M&L pressed steel frames of size 105x60 mm for door with one or more rebates incl necessary fittings, lugs, hinges, lock strike plate, flat iron hold fast etc complete as specified & as directed.

S&F mild steel angle iron work as in doors frames, conforming to 410W(Gde E-250) quality-B including fixing of holdfast and hinges complete all as specified

S&F 30 mm thick flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both side etc complete all as specified and directed.

M&L for 2nd class hardwood glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauge, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash members, any numbers and mited beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20(a) supplied and fitted to chowkats

S & F stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed with screws or stainless steel wire staples in door and aluminium window complete all as specified and directed

S&F 200 mm long Aluminium anodised barrel tower bolts.

S&F 150 mm size aluminium anodised door handles.

M&L for sliding door bolt of 300mm long plate Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F 150 mm ordinary mild steel rat tail rod pattern spring incl roller and roller plate complete all as specified and directed

M&L for preparation of new wooden surface of any description n. exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer.

M&L for preparation of old wooden surface of any description over 10cm width or girth and applying one coats of synthetic enamel paint

S&F PVC door/CB shutter 30 mm thick consisting of frame made out of MS tube for top and bottom rail with PVC sheet strip 20 mm width suitable PVC sheet bedding complete fixing to frame etc all as specified.

S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing complete as directed.

S&F stainless steel butt hinges medium weight 100 mm long complete all as specified and directed

S&F 125 mm long Aluminium anodised barrel tower bolts complete all as specified and directed.

S & F aluminium anodised powder coated window with shutter and frame of aluminium section three track, one track with stainless steel wire cloth of 0.36mm dia of wire and average width of aperture 1.4mm and two track having 5mm thick plain glass as per following specifications with and including aluminium handles, locking arrangement, etc. and as directed at site: - (a) WINDOW FRAME: - Section not less than 90 X 30 X 1.5 mm for complete frame. (b) WINDOW SHUTTER: - Top rail, Bottom rail and side rail not less than 38 X 16 X 1.5 mm thick shall be used. (c) The rate included fixing of glass pane, wire mesh, jointing clips, glazing clips, rubber packing, screws etc.and also taking down old existing window and plastering/finishing the surface after fixing of new window complete all as specified and directed.

S & F aluminium anodised powder coated window with one side hung shutter and one fixed gauge shutter and frame of approved make. Side hung glazed shutter shall be suitable for 5 mm thick glazing and fixed shutter shall be suitable for fixing of wire mesh of stainless steel of 0.36 mm dia of wire and average width of aperture 1.40 mm including necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangements etc, section of frame and shutter of window should be not less than 1.5 mm thick including taking down existing window complete all as specified and directed. (Note :Rates include all glazing/aluminium wire cloth, rubber packing, jointing cleats, glazing clips, aluminium snap beading, locking arrangements, handle, plastering and finishing the surface to match the exisiting surface after fixing of window.)

S&F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.5mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including taking down existing vantilator complete all as specified and directed. (Note :Rates include all glazing/aluminium wire cloth, rubber packing, jointing cleats, glazing clips, aluminium snap beading, locking arrangements, handle, plastering and finishing the surface to match the exisiting surface after fixing of vantilator.)

S & F of mild steel work such as window guard bars and similar work conforming to Fe – 290 Grade – E 165 complete all as specified and directed.

S&F in repair repair 25 mm dia drapery rod fancy powder coated fixed to wall with bracket & knobs complete.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection/footpath using 40mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including impression and glass strip or bitumen filling in two panel etc complete all as specified and as directed.

M&L for cement concrete type C-2 1:3:6, 40mm graded aggregate as in surface channel.

Extra for forming fair finished drain as in channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition complete all as specified and directed

M & L for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs,chajjas and similar work n. exc. 200 mm thick horizontal or slopping in fair finished surface of concrete flat complete all as specified and directed.

M & L for use and waste of form work to edges of concrete flats, treads, sides of RCC slab, RCC / PCC bends in walls or similar work thickness not exc. 20 cm in fair finished surfaces complete all as specified and directed.

M & L for providing reinforced cement concrete 1:1½:3 (Nominal Mix) type A-1, using 20 mm graded stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed.

S&F MS TMT bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, quality conforming to IS 1786 - 1985 complete.

All as per item No 105 above but 8 mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified.

Removing of existing unserviceable water proofing treatment with PCC padding, taking down cement plaster etc of any description and cleaning of top surfaces of cement concrete flushing out junction of parapet walls and washing down with water complete.

M&L for water proofing treatment to non assessible RCC roofs by providing 10mm thick screed in CM 1:3 mixed with & including water proofing compound @3% by weight of cement & applying one coat of bitumenous primer @ 0.30 kg/sqm & laying APP based polymeric modifed membrane with polyster non woven reinforced of weight not less than 3kg/Sqm of 3 mm thick with polythene finished sealing with side overlaps of 75mm & 100 mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint as per the makes approved by the Engr-in-Charge.

Dismantling timber scantlings 40 sq. cm and over in section, in any position unframed work complete all as specified and directed.

Dismantling of boarding, any description and fixed in any position fixed with screws complete all as specified and directed.

M & L for 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cubboard door/shelves complete all as specified and directed

S & F 75 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for.

S&F rolled mild steel sections as in framing for cladding, glazing, framing for chajja and the like fixed with angle cleats and connecting plates, etc. conforming to Fe-290 (Gde E- 165) complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-290 (Gde E- 165)complete all as specified and directed.

Fixing only roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) complete.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards/slabs/blankets, any thickness, including cover fillets

S&F Tee grid suspension system of size 600 mm x 600 mm type-1 made out of roll framed hot dipped galvanised steel zinc coated of not less than 120 gm/Sqm, main runner 0.3 mm thick of section 24 mm x 33 mm crross runner 0.30 mm thick of section 24 mm x 25 mm, wall angle shall be 0.63 mm thick of section 24 mm x 24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyester coated in off white/white in colour complete with material, fixing, jointing etc., all as per manufacturers instructions and direction.

S&F Coloured textured designer ceiling board (Everest) 4mm thick of size 595 x 595 mm fixing with screws/clips complete all as per manufacturers instructions and direction

Dismantling asbestos cement (corrugated or semi corrugated, etc)sheets in roof covering complete all as specified.

S&F Pre-painted galvalume aluminium zinc coating corrugated steel sheet 0.60mm thick of green colour as approved by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fied with self tapping screws incl necessary rubber end closers in corrugations on external end supports as specified

S&F Pre-painted galvalume aluminium zinc coating plain steel sheet 0.60mm thick of colour as approved by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fied with self tapping screws as specified

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts complete all as specified.

Refixing of asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts complete all as specified (Note - The rate included taking down and refixing of sheet in same position with necessary builder hardware)

S&F 6mm thick asbestos cement, serrated ridge for corrugated or semi corrugated sheets complete all as specified.

S & F 0.80 mm thick plain galvanised iron (PGI) sheets having zinc coating @ 120 gram per sqm inclusive of both sides, as in ridges, hips, valley gutters, drip, straight flashing etc., fixed in any pattern complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F vitreous china wash basin, white, flat back, size 550x400m excluding taps, waste , chain & plug & porcelain stopper including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete all as specified and directed

Supply only 15 mm bore pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified.

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil including forming surface etc to required slope complete all as specified and directed.

Excavation in trenches n.exc 1.5 M wide & n.exc 1.5 M in depth in hard/dense soil for foundation etc n.exc 10 Sqm on plan and getting out completeall as specified and directed.

Excavation in post holes or similar holes nexc 05 cum each in soft/ loose soil , getting out returning filling in and ramming with earth or broken rubble around in layers not exc 25 cm watering etc and removing surplus soil to 50 m distance and making good surface. complete all as specified and directed.

M&L for cement concrete 1:5:10 type E-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in hard/dense soil complete.

Removing surplus excavated soil to a distance n.exc 50 Mt & depositing where directed at a level n.exc 1.5 Mt above the starting point complete.

M&L 40 mm thick PCC 1:2:4 type B 0 (using 12.5 mm graded agg) as in Damp proof course to horizontal or vertical surfaces including necessary form work mixed with water poofing compound @ 2% weight of cement complete all as specified and directed.weight of cement complete all as specified and directed (Note:- Water proofing compound will be measured and paid separately)

M&L RCC 1:2:4 type B-1 (using 20 mm graded stone agg) as in scismic and other similar bands, lintel,coping, bed block or similar work including necessary form work complete all as specified. Note:- Reinforcement shall be measured and paid separately.

M&L Hard core of gauge n.exc 63mm deposited spread and leveled in layers n.exc 15cm thick, watered and rammed to a true surface.

M&L 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone agg as in sub base finishing the surface even and rough to receive floor finishes complete all as specified and directed.

M&L 100mm thick PCC (1:2:4) type B2, (using 40 mm graded stone aggregate) as in floors/paving finish even and smooth without using extra cement . complete all as specified.

S&F 75 mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified

S&F 75 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints laid in trenches or in wall complete all as specified and directed.

S&F 110 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints laid in trenches or in wall complete all as specified and directed.

S&F 75mm bore PVC (SWR) bend any radius including jointing with solvent cement complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend any radius including jointing with solvent cement complete all as specified and directed.

S/F PVC (SWR) vent cowl, 110 mm dia

M&L for precast cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in louvres and jallies 25 mm thicK (measured solid ) including all moulding set in cement mortar 1:4 complete all as specified and directed.

M&L for pre polished chequered cement concrete tiles 30cm x 30cm x25mm thick on horizontal surfaces,set, jointed and pointed in neat cement slurry in floors incl 15mm thick screed bed CM 1:6 all as Specified.

S&F Bib taps (long body )fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule complete all as specified and as dierected. (Make : ESSCO/Marc).

S&F Vitreous China urinals, half stall urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.

S&F PTMT tubular towel rail of 'D' type 60cm long between flanges complete all as specified and directed.

S&F Water Closet (squatt pattern) of vitreous china squatting pan of pattern "ORRISA" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cirstern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including trap set in and incl concrete complete all as specified and directed.

S & F polymer white (polypropylene Delrin and ABS) low level flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, flush pipe, brass screws, handle etc complete having BIS description mark with IS: 7231 and making all connection complete all as specified and directed.

S & F 15 mm bore angle valve, brass chromium plated, complete all as specified and directed.

S&F 15mm bore PVC connection 450mm long with two brass chromium plated brass nuts and PVC washers complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 40mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed.

M&L for Brickwork with subclass‘B’ bricks, straight or curved on plan exc 6m mean radius built in,cement mortar 1:4 complete all as specified and directed.

M&L for PCC 1:2:4 type B-I using 20 mm graded stone aggregate as in coping .including weathering and throating including necessary form work etc, complete all as specified and directed.

M & L for PCC 1:2:4 type B1 using 20mm graded stone agg as in precast cover slab for main holes, drains, channels etc set in cement mortar 1:4 including necessary form work all as specified and directed

M&L Cement concrete in foundations, filling and mass concrete (PCC) Type D2 1:4:8 (40 mm graded aggregate) etc complete all as specified & as directed by Engineer-in-Charge

M&L, cement concrete type D-2, 1:4:8 (40 mm graded agg.) 100 mm thick as sub base in foundation etc all as specified and directed by engineer- in- charge

M&L 40mm thick PCC (1:2:4) type B1, (using 20 mm graded stone aggregate) finish even and smooth with using extra cement complete all as specified.

Providing prrecast cement concrete Type B1 1:2:4 (20 mm graded aggregate) in appex stone/kerb stone with plain fair faces including chamfers, weathering throating etc and set in cement mortar 1:4 complete with joints to match size and shape as approved by engr-in-charge

M&L sand filling 50 mm thick under floor/over floor or in foundations including well ramming

M&L 60 mm thick coloured interlocking PCC tiles in approved design/colour set laid over compacted sub soil / sand all as specified and directed.

Supplied and fixed glass dividing strip 3mm thick and 38mm wide insert in position to confirm the design wide all as specified.

M&L Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes

M&L rendering 15mm thick in CM 1:3 on fair faces of brick work or concrete surfaces mixed with water proofing compound , finished the surfaces even and smooth without using extra cement , (Water proofing compound shall be mesured and paid separately )

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conf to Fe-410-w or E -250 quality A... complete all as specified and directed.

S/F factory made flyproof mesh panel pvc door shutter 30 mm thick (Style) consisting of frame made out of M.S. frame shall be covered with heat moulded wood grain printed PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, all as per specification & drawing and SS wire gauzed i.e. panel will be of SS wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be screwed to M.S. tubes. The wire gauge shall be stretched to tighten firmly, all as directed by Engr-in-charge.

S & F anodised Aluminium alloy sections sliding windows with frames Series-C (20mm) and , 3 track sliding shutters duly fitted with neoprene beading, glazing clips, shutters with tinted glass 5mm thick and stainless steel wire cloth 0.35mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed.

Suply and fix Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F for butt hinges 100mm size medium weight cold rolled mild steel .

M&L 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F gun metal or gate valves with iron wheel head screwed both ends for iron pipe and fixed to 20 mm dia.

S&F Ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to 20 mm dia pipe.

S&F, 32 mm dia low density polythelens (LDPE) pipes of prerssure rating 6 Kgf/Sq cm

Supplied and fixed vitteous chinaware EWC padestal type closet with white seat & cover with flat bottom with hinging device all as specified and directed.

Supplied and fixed brass chromium plated tubular towel rail, 20 mm dia, D type 60 cm long between flanges

M&L Salt-glazed stoneware drain pipes 150 mm dia laid in trenches and jointed grade 'A' complete all as specified and directed.

M&L Cement concrete type D2, 1:4:8 using 40mm graded aggregate concrete bed to drain pipe of dia 150 mm including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

M/L for PCC 1:2:4 type B1 using 20mm size graded stone aggregate as in bed blocks/ coping /benching in manhole etc including making drains and necessary form work finishing even and smooth with using extra cement all as specified and directed

S&F , 18mm thick PVC sheet one side prelaminated of approved texture (Celuca ply of Rajshree make or equivalent in Sintex as approved by GE ) as in cabinet ( with shelves and partitions ) including required beading and necessary fittings and fixtures as per manufacturers instructions complete all as specified and directed by Engr-in-Charge.

S&F telescopic (Hattich) channel for drawer fixed with steel screws all as specified and directed

S&F100mm extruded brass handle fabricated type polished complete all as specified and directed by Engineer in Charge

S & F Continuous (piano) hinges, brass, bright finish or electrogalvanised

M&L for PCC(1:3:6) type C-2(Using 40mm graded stone aggregate) to bed of drain pipe incl. packing under and haunching against the pipe after they are laid and tested for 150mm bore complete all as specified & directed.

M&L for laying and jointing Reinforced concrete pipes 150mm, class NP3, laid and jointed complete with collars laid in trenches & jointed in cement mortar 1:1 complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends complete all as specified and directed . (Note- Inner girth only shall be measured)

M & L Pre cast reinforced cement concrete 1:2:4 type B1 (Using 20mm graded stone aggregate) set in cement mortar 1:4 for man holes cover slab all as specified and directed by engineer charge

M&L for providing mild steel steps/rungs for manhole including cut to length bent to shape fixed in concrete as required all as directed

M&L for cutting into existing manholes for connecting new drain pipe making good to pipe & rendering cutting out existing benching for and forming branch channel(1/2 round or ¾ in section) in cement concrete 1:2:4 type B-1 smooth finish and reforming benching as required complete for 250mm internal dia pipe all as directed.

Taking down carefully surface aluminium or copper point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete.

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete.

Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators complete for the following :-

One light point controlled by one switch.

One fan point controlled by one switch.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

One bell point controlled by one bell push.

Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete.

S&F switch piano flush button single pole one way 6 amp complete.

S&F switch piano flush button single pole one way 16 amp complete.

S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete.

S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete.

S&F hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete.

S&F bell push, flush type, 6 amp 240 volts complete.

S&F door bell, AC, 240 volts, single pole complete.

S&F ceiling rose 6 amp, 3 plates polycarbonate body complete.

S&F LED batten (1.2 m) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not more than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make : Philips cat ref no. ENDURALED BATTEN " BN 108C LED 20S PSU CDL WH " or equivalent in Wipro or C & S Elect as approved.

S & F LED fixtures 10 watt including connection as per Wipro Trim LED NEO cat ref no. LL20-111-XXX-65 -NE 6500 or equivalent in Philips or Havells as approved.

S&F angle holder, insulated polycarobonate body with back plate complete.

S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable as required all as per Philips cat ref no. WT202W LED6S CW PSU S1 PC or equivalent in Wipro or Bajaj or Havells as approved.

M&L for pipe in pipe chemical earthing with GI pipe electrode 3.0 m long having outer pipe nominal dia 80 mm & inner pipe nominal dia 50 mm duly filled with highly conductive and anti corrosive compound of required quantity having chemical composition Bentonite 40%, copper sulphate 20%, Gypsom 5%, Graphite 10%, Alum 5%, Zinc sulphate 10%, Aluminium sulphate 10% burried in ground by digging a bore of 150 mm dia surrounded by soil friendly backfill compound non soluble in water including connection with galvanised earth wire 4 mm dia from pit to main MCB DB protected in 15 mm GI pipe light grade, making PCC pit of size 0.3 m x 0.3 m x 0.3 m (inner size) in mix 1:3:6 type C1 with RCC 1:2:4 type B-1, 40 mm thick cover reinforced with 8 mm dia MS bars 3 Nos both ways with lifting hook made out of 8 mm dia bar and testing on completion to achieve value not more than 1.0 ohm complete.

M&L for earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work complete.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour 20 mm dia along with accessories of nominal sizes :-

2x4 sqmm + 1x2.5 sqmm earth continuity conductor in 20 mm dia conduit..

2x6 sqmm + 1x4.0 sqmm earth continuity conductor in 20 mm dia conduit..

S&F MCB distribution board ETPN, 415 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F MCB distribution board SPN, 240 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

Single pole 6 to 16 amp. Make - Legrand DX3 cat ref no. 408587 to 408592 or equivalent in Schneider or Hager as approved.

Double pole 32 amp. Make - Legrand DX3 cat ref no. 408636 or equivalent in Schneider or Hager as approved.

Four pole 63 amp. Make - Legrand cat ref no 408702 or equivalent in Hager or Schneider as approved.

S&F Exhaust fan 300 mm sweep, Metral body, with bird protector heavy duty motor, double ball bearings, 510 CMH,single phase, 1350 rpm, powder coated metalic finish blade 3 Nos, noise level 45-50 dB, 230V, 50 Watt, 50Hz, sturdy steel bird guard with louver shutter and mounting acessories including making openings for exhaust air through brick/PCC wall and making good by plastering, rendering, white washing etc around the wall openings complete all as directed. Make : Havells / Bajaj /Crompton as approved

S&F ceiling fans 1200 mm sweep, white colour single phase, 5 star BEE rating ISI marked including connection with PVC insulated and sheathed 3 core copper conductor canle of size 0.5 sqmm complete. Make- Havells/ Almonard/ Crompton as approved

Taking down Ceiling Fan of any make, type and sweep by disconnecting Electric Connection and keeping in safe castody for repair.

Dismantling of ceiling fan from existing location any sweep, any make, cleaning throughly servicing of fan motor and parts fitted their in oiling, greasing to brush/ bearing, replacement of unserviceable parts required applying two coats of white synthetic enamel paint over one coat of primer on fan blades any body, reassembling, testing at site as directed.

S&F steel tubes light grade galvanised with all fittings fixed to walls / floors / poles / road crossing etc of 40 mm bore complete.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core complete. Make - Havells / Polycab / Finolex as approved.

M&L for sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete.

Supplying and laying old size bricks, common burnt clay building bricks sub class 'B' designation 75 laid in trenches over sand for cable protection complete.

Cutting existing steel tubing for alterations or aditions of pipe size 40/50 mm bore and screwing complete.

M&L for stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 20 mm bore complete.

M&L for gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe 50 mm bore complete.

scon engineers & contractors

Shree Builders

ARTI CONSTRUCTION

Ramdev and Sons

GIRNAR CONSTRUCTION