Repairing and maintenance work(s) of tube well and Installation of Submersible Pump with all fittings and necessary Pipe line work on existing Tube well at different Sansad under Ramkrishnapur Borhanpur Gram Panchayat

Amount

Supplies of G.I. pipes of TATA make. (ii) 40 mm dia. Medium quality

Supply of G.I. Sockets. (ii) 40 mm dia. Medium quality

Supply of PVC pipes & fittings (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).(Schedule 80) A) PVC Pipes (i) 40 mm dia

Supply of PVC pipes & fittings (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (Schedule 80) B) PVC Socket (i) 40 mm dia. Medium quality

Supply of UPVC pipes & fittings (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). A) UPVC Pipes (i) 40 mm dia

Supplying brass check valve (vertical). 25 mm Supplying brass check valve (vertical). 25 mm

Supplying brass check valve (vertical). 32 mm Supplying brass check valve (vertical). 25 mm

Supplying brass check valve (vertical). 40 mm Supplying brass check valve (vertical). 25 mm

Supplying Mark - II Hand pump complete set. (i) For 40 mm dia. tube well, cylinder type

Supplying of Guide Bush for Mark - II Tubewell

Supplying of 12mm dia. Piston rod.

Supplying ofcompleteCain set for Mark - II hand pump set.

Supplying of bearing for Mark - II hand pump set.

Supplying of 12mm dia. MS connecting rod including rod socket. 3.0m. Length.

Supplying of MS rod socket for 12mm dia. connecting rod including .

Supplying, fitting and fixing 65 mm dia. deep well brass cylinder with necessary fittings and accessories.

4" PVC Bucket

2.5" PVC Bucket for cylinder.

4" Lether Bucket

2.5" Lether Bucket for cylinder.

Planger with valve (Brass)

Planger rod.

White Zinc. 50 GM PACK

Seat Valve

Nut bolt required for TW

1/2" x 1 1/2 " Bush

2” x 1/2" Bush

1/2" x 3” Bush

2” Bearing

Shaft

Spandal

40 mm G.I. Short Piece

32 mm G.I. Short Piece

1/2" Washer

Construction of masonery platform 1.85 m.X 1.85 m. with 75 mm. thick cement concrete (4:2:1) with graded stone chips over a layer of picket jhama brick flat soling and 125 mm. x 75 mm. brick band on the edge, a circular pedestal to hold the tubewellrigidlycin position of size 200 mm dia and 150mm in ht. with concrete (4:2:1) including 15 mm. thick cement plaster (4:1) with neat cement finish to the exposed surface complete.

Supplying, fitting and fixing of Submersible (1 H.P.) Pump(Brand-Kirloskar/Crompton/C.R.I./ Greaves OR Equivalent) with all Electrical arrangements with upto 50 Ft. Electrical Wire with Switch Board.

Control Panel Box for Submersible

Waterproof Wire

1” x ½” Metal Elbow

1” x ½” Metal Tee

1” UPVC Elbow

1” UPVC Tee

1” Metal M.T.A.

1” Tank Connector

1” Socket

1” Ball Valve

Taplone

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (a) 1000 litre capacity

Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required

Bucket washing of 40/50 x 100 mm mark – II tubewell. Includes hire and labour charges of all necessary equipments including cost of Bleaching Powder,bucket etc. ,opening & re fixing and making the TW in running condition

Plumbing Mistry

Labour

M/S SAHA ENTERPRISE (BID ID -6460688)

OMBIA ENTERPRISE (BID ID -6465225)