Construction of Govt. College at Raipur Rani in Distt. Panchkula (Pdg. 11 KV Sub Station only) (Recall).

Amount

1 ( c ) Moulded case Circuit breakers. 31.12 Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections.(Make: Schneider/ L&T / Legrand). 15 Amp..to 60 Amp.. 415 V ,10 KA 3-phase. 31.12 c (i)

100 Amp..to 220 Amp..415 V,10 KA 3-phase. 31.12 c (ii)

2 Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. 31.21(xxx) PVC pipe 120 mm dia. 31.21(xxx) (a)

PVC pipe 80 mm dia. 31.21(xxx) (b)

3 (Q) Earthing 31.22 Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. 31.22(iii)

Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) comlete as required. 31.22(iv)

Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode. 31.22(v)

Pdg. and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required . 31.22(x)

Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required . 31.22(xi)

Pdg. and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required with all labour and material. 31.22(xiv)

Pdg. and fixing 25 mm x 5 mm G.I. Strip on surface or in recess for connections etc. as required with all labour and material. 31.22(xv)

Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. stapples of same size. 31.22(xix)

Supply and erection of 20 mm x 3 mm thick copper tape fixed with suitable copper staples of same size. 31.22(xx)

4 (R) Lightning conductor (a) Copper. 31.23 Supply and erection of copper tape 32 mm x 6 mm thick from earth electrode directly in ground and surface , fixed with suitable copper stapples of same size. 31.23 (vii)

5 Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . ( Make: Havells/ Polycab/ RR Kabel). 31.26 25 Sq. mm 3.5 Core Armoured Cable. 31.26 (xxv)

50 Sq. mm 3.5 Core Armoured Cable. 31.26 (xxvii)

70 Sq. mm 3.5 Core Armoured Cable. 31.26 (xxviii)

95 Sq. mm 3.5 Core Armoured Cable. 31.26 (xxix)

150 Sq. mm 3.5 Core Armoured Cable. 31.26 (xxxi)

6 Supply and erection of suitable compression type brass cable glands for underground Cable. 31.28 25 Sqmm to 50 Sqmm Cable 2 to 4 Core. 31.28 (iii)

70 Sqmm to 95 Sqmm Cable 3 to 3.5 Core . 31.28(iv)

120 Sqmm to 185 Sqmm Cable 3 to 3.5 Core 31.28 (v)

Street Light 31.3 7 Supply and erection of prestressed cement concrete pole as per IS : 1678-1960. 31.30 (VI) 11 metres long 152 mm x 203 mm at top and 152 mm x 368 mm at bottom with working load of 360 Kg. burried 2.20 m in ground. 31.30 (VI) (iii)

11 metres long 152 mm x 203 mm at top and 152 mm x 368 mm at bottom with working load of 360 Kg. burried 2.20 m in ground. 31.30 (VI) (iii)

8 Supply, Installation, Testing and Commissioning of wall / free standing floor mounting dust & vermin proof compartmentalized cubical panel made out of 2 mm thick CRCA sheet, required hardware 3 mm thick bakelite sheet provided all along the bus bar and cable tray separating switches compartment and supporting suitable channel duly painted by 2 coat zinc / red oxide primer followed by 2 coats of powder coating in grey or required shade after rising. the panel having PU / Neoprene rubber gasket of not less than 3 mm thickness separate detachable gland plate MS base channel hinged door with inter locking arrangement for equipments / switch wear. 31.63 Transport acrylic sheet shall be provided in front of bus bar compartment to prevent direct access to bus bar bakelite sheet 3 mm thick for separately cable alley to BBC from switch chamber extended solid copper bars up to cable alleys shall be provided for outgoing connection which shall be paid as extra items. Side walls and cable alley compartments shall be having bolted type doors with detachable extension type structure. The Panel will be complete with control wiring (Copper) and fuse protection. (Only outer area on all sides shall be measured).Make: Varindavan Electrical/ Kalyani Switchgear/ Unitech Power Systems.

9 Supply and Fixing of copper bus bar duly tinned by means of SMC / DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending, cutting in required shape and size and insulation with color coding heat shrinkable PVC insulation complete in all respect. 31.64

11 Supply and Fixing of rotary handle for ON / OFF operation of existing MCCB in the LT panel including fixing the same in position with all labour and material to required to complete the job in all respect. 31.66 Rotary Handle above 125 Amp.., MCCB ( ii )

12 S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 Mtr. Below ground level including digging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in charge of work. 31.67 HDPE 63/50 mm outer dia / inner dia ( i )

HDPE 90/75 mm outer dia / inner dia ( ii )

13 S/E of XLPE (E) 11 KV HT aluminum conductor armoured cable ISI mark laid in existing pipe /trenches/surface with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. (Make: Havells / CCI / KEI ). 31.71 95 sqmm 3 core XLPE Cable iv)

14 Supply, installation, testing & commissioning of 11KV Oil type Outdoor type transformer 315 KVA capacity, 3Phase, 50Hz alongwith spefication i.e. Copper Double Wound, Oil Immersed, Naturally Cooler, Core type Transformer confirming to IS : 1180, with Latest efficiency level with first filling of Oil as per IS : 335. Output- 200 KVA, No load voltage ratio at rated voltage & frequency - 11 / 0.433 KV, Cooling type- ONAN, Off Load tap changer, taping range & step (Plus/ Minus/ Step) - (5%/ 10%/ 2.5%), vector group- Dyn-11, Temp rise at rated load on Ambient- 50 Deg C, Paint Shade to IS : 5 (Epoxy) alongwith rating & diagram plate, earthing terminal (2Nos.), lifting lugs, air release hole with plug, dehydrating silica gel breather, prismatic oil level guage, oil filling hole with plug on conservator, oil conservator with drain plug, thermometer pocket, jacking lugs, bottom drain cum filter valve, top flter valve, 4Nos. bi directional rollers, explosion vent with diaphram, marshelling box, 100mm OTI with alarm & trip, WTI with alarm & trip, buchholz relay with alarm & trip, shutt off valves for buchholz relay (2Nos.) Magnetic Oil level gauge, Radiator - fixed & cable box - HV/ LV side complete in all respect upto the entire satisfaction of Engineer- in- charge of work. Make: Kirloskar, Crompton, Schneider, Voltamp. NS-1

15 Supply and erection of heat shrinkage type end termination jointing kit outdoor/indoor type suitable to accommodate 3 core 11 KV XLPE aluminum cable/ ABC cable complete with all the kit contents including earth continuing connection along with 3 nos. crimpling type aluminum lugs of suitable capacity including making joining etc complete in all respect. (Make Denson) and equivalent make. NS -2 Indoor for 95 sqmm , 3 - core (end termination tapex model) (i)

Outdoor for 95 sqmm , 3 - core (end termination tapex model) (ii)

16 Supply & erection of 11KV gang operated switch Rashtriya / Jayshree / BHEL make conforming to IS with latest amendment including suitable size of copper blade erection of same on the existing 'H'pole with the help of 3 Nos. channels of size 75mmx40mmx6mm, 1.8M long fixed with suitable size of MS clamp, nuts and bolts including cost of 6 Nos. 11KV insulator with GI pin, RD fuses and painting with 2 coat of approved paint and one coat of red oxide material required to complete the job in all respect up to entire satisfaction of the Engineer-in-Charge of the works. NS-3

17 Supply & erection of lighting arrestor model ALPRO / Alastom/ LEMCO make suitable for 11KV 3 Phase 50 HZ ground neutral system comprising of spare gape type queen gap type in series with non linger resistar element house in Horizontally scale poreclam bushing with line and ground terminal along with mounting clamps conforming to ISS 3070 (Part-I) of 1985 with latest amendment with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works. NS -4

18 Supply of 11KV Pin Insulator Brown colour with 11KV GI Pin Jay Shree make with Disc fitting T&C type complete in all respect with erection of the same upto the entire satisfaction of the Engineer in Charge of work NS -5

19 Supply & Erection of Rubber mat of size 2mX1m & 12 mm thick suitable for 11 KV complete in all respect. NS -6

20 Supply , Erection , testing & comissioning of 11 KV indoor type HT Metering panel complete with CTs , PTs cubical and electronics Meter with accuracy class 0.2 to 0.5 as per requirement / approved by UHBVN. Panchkula Electrical Supply consisting of following : NS -7 i) Cubical panel free standing floor mounting type made of sheet steel 14 G SWG CRCA sheet with channel iron base frame spray painted with strong synthetic grey channel paint as per size & design approved by UHBVN. PANCHKULA Electrical Supply.Out door Type with outer canopy. i) ii) 3 nos. 11 KV CTs of rating as approved by UHBVN Panchkula. Chandigarh Electrical Supply for indoor installation of approved make of UHBVN Panchkula Electrical Supply. ii) iii) 1 no. 11 KV PTs 11000/110 volts 10 VA burden 0.2 to 0.5 accuracy oil filled suitable for indoor installation of approved make of UHBVN Panchkula Electrical Supply . iii) iv) Digital electronics meter 3 Phase 4 wire 11000 / 110 volts 10 VA burden 0.2 to 0.5 accuracy for recording reading of KWH of make and rating approved by UHBVN Panchkula Electrical Supply with push button display operating system for different kind of readings . iv) vii) The cubical panel will be complete in all respect including interconnections , internal wiring with PVC copper cable its testing / approval of all items by UHBVN Panchkula Electrical Supply with a gurantee of one year from the date of commissioning including cost of all labour & material required to complete the job in all respect upto entire satisfaction of Engineer-in-charge of work.. vii)

21 Supply and erection of MS channel 100x50x6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge. NS -8

22 Supply and erection of MS angle 50x50x6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge. NS -9

23 Supply and erection of MS flat 50x6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge. NS -10

24 Supply, Commissioning , Testing of Stey Set complete with stey wire & disc insulator as per specification complete in all respect upto the entire satisfaction of Engineer -in - charge of work. NS -11

27 Supply, Installation, Testing & Commissioning of Capacitor Panel 150 KVAR / 415 Volt of Havell's make (Cat. No. QHKTCD5150X0) complete in all respect upto the entire satisfaction Engineer-in-charge of work as per approved list. Make-Havell's and equivalent approved make NS -14

28 Supply, Installation, Testing & Commissioning of MCCB Enclosure upto 200A complete in all respect upto the entire satisfaction Engineer-in-charge of work as per approved list. Make-ABB/ Siemens / Schneider NS -15

29 Construction of platform and fencing for substation complete with all petty material required to complete the job in all respect (as per PWD specifications) NS -16

M/S PANJETA ELECTRICALS

M/S Mohan Lal Gupta