SPECIAL REPAIR REPLACEMENT OF MECHANICAL LAUNDRY PLANT AT IMA DEHRADUN

Amount

Taking down old unserviceable Industrial Washer Extractor Machine after disconnect the electric connection, water inlet/outlet pipe line etc complete all as required at site and directed by Engineer-in-Charge.

Supply installation testing and commissioning of Industrial Washer Extractor Machine with loading capacity 30 kg dry weight per change, front loading open pocket havy duty, high spin, top suspension, full stainless stell cabinet, powder/liquid detergent compartment, electrically heated, stainless steel inner cylinder, outer drum loading door, front stainless steel, Inner basket having three lifter design, single motor with variable frequency inverter drive for various speeds for wash, distribution low, normal and high spin, Turned suspension for vibration less performance, fully programmable miero processor Control (PLC) for preset processes system, solenoid operated water inlet valve, electrical operated drain valve, operates on 415 volt 3 phase 50 Hz AC supply complete all as directed. Make:- A One Engineering Works/Sagun Enterprises/ Sterifag/ Fabcare

M&L for PCC 1:3:6 type C-1 (using 20 mm graded granite stone aggregate) as in coping/foundation including necessary form work complete all as specified and directed.

M&L for Cross arms, bracings, supports,clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sq mm 3.5 core (From main panel to distribution panel) complete all as specified. Make:- Polycab, SCI, Havells,Gemscab

Supply and fix in replacement, PVC insulated,un-armoured, heavy duty electric power cable 16 Sqmm 4 core copper conductor, 1100 volts grade, etc complete all as specified and directed.Make:- Polycab, SCI, Havells,Gemscab

Supply and fix in replacement, PVC insulated,un-armoured, heavy duty electric power cable 10 Sqmm 4 core copper conductor, 1100 volts grade, etc complete all as specified and directed. Make:- Polycab, SCI, Havells,Gemscab

Supply and fix in replacement Non Return Valve of Industrial Washer Extractor Machine as per existing type and size.

Supply and fix in replacement Main motor pulley of Industrial Washer Extractor Machine as per existing type and size.

Supply and fix in replacement temp sensor with cable of Industrial Washer Extractor Machine as per existing type and size.

Supply and fix in replacement Water level sensor with pipe of Industrial Washer Extractor Machine as per existing type and size.

Supply and fix in replacement water solenoid valve of Industrial Washer Extractor Machine as per existing type and size.

Supply and fix in replacement Chemical valve of Industrial Washer Extractor Machine as per existing type and size.

Supply and fix in replacement Water inlet hose pipe of Industrial Washer Extractor Machine as per existing type and size.

Supply and fix in replacement Contactor 32 Amps for Industrial Washer Extractor Machine as per existing type and size.

Supply and fix in replacement Heating element 6.6 KW for Industrial Washer Extractor Machine as per existing type and size.

Supply and fix in replacement Belt front and back (Set of two) of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

Supply and fix in replacement Power supply control unit of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

Supply and fix in replacement I/o cord/PLC of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

Supply and fix in replacement Contactor 32 Amps for Dryer of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

Supply and fix in replacement Contactor 40 Amps for Dryer of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

Supply and fix in replacement Heating element for dryer (Set of six) for Dryer of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

Supply and fix in replacement Supporting roller for Dryer of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

Supply and fix in replacement Sealing felt for Dryer of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

Supply and fix in replacement CPU Controller Unit for Dryer of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

Supply and fix in replacement Door switch for Dryer of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

Supply and fix in replacement Door gasket for Dryer of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

Supply and fix in replacement Bearing for Dryer of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

Supply and fix in replacement Vaccume switch for Dryer of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

Supply and fix in replacement Transformer for Dryer of industrial Tumble dryer-T5675 of Electrolux- as per existing type and size.

M&L earthing with galvanized iron earth plate of size 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to galvanized earth lead iron strip 32 x 6mm dia by means of volts, nuts, check nuts and washers of galvanized iron or steel including excavation/earth work in any type of soil, returning filling in removal of surplus soil, to a distance upto 50 mtr PCC 1 : 3 : 6 type C-1 earth pit, RCC cover with suitable handle for lifting, water pipe, funnel etc complete all as shown in electrical plate No 5 of SSR part-I all as specified including testing on completion.

Supply and fix in replacement Male brass threaded adaptor (MTA/MBTA) 20 mm outer dia

Supply and fix in replacement Male brass threaded adaptor (MTA/MBTA) 25 mm outer dia

Supply and fix in replacement female brass threaded adaptor (FTA/FBTA) 50 mm outer dia

Supply and fix in replacement female brass threaded adaptor (FTA/FBTA) 25 mm outer dia

Supply and fix in replacement CPVC pipe 20 mm outer dia.

Supply and fix in replacement CPVC pipe 25mm outer dia

Supply and fix in replacement CPVC pipe 50 mm outer dia

Supply and fix in replacement CPVC union 20 mm outer dia.

Supply and fix in replacement CPVC union 25mm outer dia

Supply and fix in replacement CPVC union 50 mm outer dia

Supply and fix in replacement Wall mounting industrial socket 63 amp cap 5 pin ,3P+N+E 415 volts,AC splash proof IP 67 protected make C&S cat part No CS 63249 or equivalent in ABB,Legrand complete all as directed.

Supply and fix in replacement Wall mounting industrial plug 63 amp cap 5 pin ,3P+N+E 415 volts,AC splash proof IP 67 protected make C&S cat part No CS 61048 or equivalent in ABB,Legrand complete all as directed.

Lucky Engineering Works

Deven Associates

VIJAY ENTERPRISES

Electromech Engineers

RAMAPATI ENGINEERING SERVICES

M/s Anamika Enterprises