REPAIR TO INTERNAL WATER SUPPLY, TILLING, SANITARY FITTING AND OTHER CONNECTED REPAIRING WORKS IN TECH AREA AT AF STN JAMNAGAR UNDER GE (AF) JAMNAGAR NO 1

Amount

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified as directed by Engineer in Charge.

S&F false ceiling of Non asbestos fiber cement building boards, manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 600mmx 600mmx 4mm thick fixed over and including anodised aluminium powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T Section (main & cross member) of size 25mm x25mmx1.5 mm thick in square pattern of grid size 600x600mm. The aluminium frame work will supported on side wall with the used of alumminium 'L' section of size 25x25x1.5mm angles etc. Snap grid shall be supported with hangers of 4mm dia, galvanised iron wire adjusting level fixed to roof slabs/truss etc by means of ceiling cleats made out of galvanised iron flat of size 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified as directed by Engineer in Charge.

Taking down chowkhats or frames n.exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified as directed by Engineer in Charge.

S&F of solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing complete all as specified as directed by Engineer in Charge.

S&F of factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified as directed by Engineer in Charge.

S&F 100mm long aluminium anodised barrel tower bolt of exturded section complete all as specified as directed by Engineer in Charge.

S&F of Aluminium handles, cast type anodised 100 mm complete all as specified as directed by Engineer in Charge.

S&F for Butt hinges, medium weight, cold rolled mild steel, and fixed, size of hinges in 75 mm, etc complete all as specified as directed by Engineer in Charge.

Demolition of brickwork or stone/ boulder masonry / PCC block masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified as directed by Engineer in Charge.

M&L Precast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in block masonry with soild bocks, exc 10cm width and set in cement mortar 1:6complete all as specified as directed by Engineer in Charge.

M&L rendering 15mm thick in cement plaster in CM 1:6 on fair faces of brick or concrete, external surfaces of walls finished the surface fair and even without using extra cement complete all as specified as directed by Engineer in Charge.

Taking down cement plaster on brick wall, ceilings etc, racking out joints, hacking for key & scrubbing with water complete all as specified as directed by Engineer in Charge.

M&L rendering 10mm thick in CM 1:4 on fair faces of brick or concrete, internal surfaces of walls finished the surface fair and even without using extra cement complete all as specified as directed by Engineer in Charge.

M&L for preparation of newly plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer incl a coat of cement based wall care putty complete all as specified as directed by Engineer in Charge.

Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc exc 250 lit and not exc 500 liters and writing date of cleaning with white paint on each tanks complete all as specified as directed by Engineer in Charge.

Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc exc 500 lit and not exc 1000 litere sand writing date of cleaning with white paint on each tanks complete all as specified as directed by Engineer in Charge.

S&F in repair PVC ball valve 20 mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plasic ball screwed for iron pipe and fixed (minimum weight 15 gms- 142 gms) complete all as specified as directed by Engineer in Charge.

Dismantling of PVC water tanks exc 250 ltrs n exc 500 ltrs,Complete all as specified and directed by Engr-in-charge.

Dismantling water tank any type and any position from site of capacity 1000 litres complete all as specified as directed by Engineer in Charge.

S&F 500 ltr Rotaional moulded polyethylene water storage tanks cylindrical vertical with closed top hoisted and fixed in position complete all as specified as directed by Engineer in Charge.

S&F 1000 Ltr Rotaional moulded polyethylene water storage tanks cylindrical vertical with closed top hoisted and fixed in position complete all as specified as directed by Engineer in Charge.

Taking down 15mm bore steel tubing and connections in any position,Complete all as specified and directed by Engr-in-charge.

Taking down 20mm bore steel tubing and connections in any position,Complete all as specified and directed by Engr-in-charge.

S&F GI tube 15mm dia midium graded with all fitings to wall, celing or laying in floor/ trenches complete all as specified as directed by Engineer in Charge.

S&F GI tube 20mmdia medium grade galvanised, with all fitting and fixed to walls and ceilings or laid in floors complete all as specified as directed by Engineer in Charge.

Supplying and laying of 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors/ trenches complete all as specified as directed by Engineer in Charge including taking down old pipes.

S&F in repair Vitreous china wash basin, white flat back , size 550x400mm with padestal excluding taps, waste pipe but including waste cupling of PTMT of 32mm bore dia incl brackets etc complete all as specified as directed by Engineer in Charge.

S&F in repair pillar tape 15 mm CP fancy type with capstan heads , screwed down high pressure with or with out lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipes and fixed complete all as specified as directed by Engineer in Charge.

S&F in repair vitrious squating pan orrisa pattern Size 580 x 440 mm white with integral foot rest including P or S trap and connection to pipe, complete all as specified as directed by Engineer in Charge.

S&F in repairs for vetrious china wash down water closet pan of padestal pattern white with P or S trap including seat cover etc complete all as specified as directed by Engineer in Charge.

S&F in repair Toilet paper holder of vitreous china coloured fixed to walls with chromium plated (CP) brass screws, complete all as specified as directed by Engineer in Charge.

S&F in repairs plastic water closet seat, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified as directed by Engineer in Charge.

S&F in repair PVC valve less syphonic action low level flushing cistern 10 Ltr capacity complete all as specified as directed by Engineer in Charge.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified as directed by Engineer in Charge.

S&F in repair Bib taps 15 mm chromium plated long body complete all as specified as directed by Engineer in Charge.

S&F for Bib taps, chromium plated with fancy type, screwed down, screwed for iron pipe or for brass ferrule, Bore of pipe 15 mm, etc complete all as specified as directed by Engineer in Charge.

S&F in repairs stop cock chromium plated fancy type15 mm dia complete all as specified as directed by Engineer in Charge.

S&F in repair Angle Stop valves fancy type brass chromium plated with crutch or butterfly handle, screwed both ends for iron pipe or for unions 15mm dia pipes, complete all as specified as directed by Engineer in Charge.

S&F in repair 20mm bore dia Gun metal Gate valve with iron wheel head screwed both ends for iron pipe or for union, complete all as specified as directed by Engineer in Charge.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified as directed by Engineer in Charge.

S&F in repair tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of Aluminium anodised complete all as specified as directed by Engineer in Charge.

S&F in repair Vitreous China half stall urinals, (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified as directed by Engineer in Charge.

S&F in repair Waste coupling of PTMT suitable for urinals, (Minimum weight 32mm-45gms complete all as specified as directed by Engineer in Charge.

S&F in repair Kitchen sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including necessary PVC outlet pipe and coupling complete all as specified as directed by Engineer in Charge.

S&F in repair s/s Grating 100mm dia complete all as specified as directed by Engineer in Charge.

S&F in repair 75mm dia Cast iron Floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified as directed by Engineer in Charge.

S&F in repair s/s Grating 75mm dia complete all as specified as directed by Engineer in Charge.

S&F in repair waste Pipe (32/40mmdia) suitable for urinals,Wash Basin and Sinks complete all as specified as directed by Engineer in Charge.

S&F in repair hand shower (Health Faucet) CP with inner flexible tube with wall hook complete all as specified as directed by Engineer in Charge. (Model No ALD-CHR-593 of Make Jaquar or equivalent model of Marc/Kohlar)".

S&F in repair plastic sheet covers for water tank, black,closed pattern complete all as specified as directed by Engineer in Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified as directed by Engineer in Charge.

M&L non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, over 15 mm thick cm (1:6) in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles complete all as specified as directed by Engineer in Charge.

M&L for dark shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm laid over 15 mm thick cm (1:6) bedding in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified as directed by Engineer in Charge.

M&L glazed ceramic tiles in vetical surfaces 350x 250x7mm/ 450X 350X 7mm thick set and joint in neat cement slurry on 10mm thick plastering in CM 1:4 and pointed in white or colour cement to match complete all as specified as directed by Engineer in Charge.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like set and jointed in cement paste including backing coat in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified as directed by Engineer in Charge.

S&F PVC (SWR) pipes 110 mm bore, single socketed in any length with rubber ring joints fixed to walls including taking down old pipe complete all as specified as directed by Engineer in Charge.

S&F PVC (SWR) pipes 75 mm bore, single socketed in any length with rubber ring joints fixed to walls including taking down old pipe complete all as specified as directed by Engineer in Charge.

RACON CONSTRUCTION (BID ID -3342329)

suvidhiconstruction (BID ID -3344344)

nasreenenterprise (BID ID -3344299)

High Tech Consruction (BID ID -3344400)

Sagathiya Builders (BID ID -3343928)

DWARKADHISH ENTERPRISE (BID ID -3343926)