Construction of a CC/White topping road from Tasmiya Property to Dr. Bholu on Fatehullahpur Road.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and Laying 12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand)

Supply /laying and stone ballast 53mm to 22.40mm All comp of work direction of Engineer charge ETC

Laying spreading and consolidation of 12 cm (loose) thick coat of stone ballast including screening material and rollers etc all complete as per the direction of engineer in charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level level1:2:4 (1 Cement : 2 coarse sand (zone-ill) derived from natural sources : 4 graded stone aggregate 40 mmnominal size derived from natural sources)

Construction of thin white topping with plain cement concrete (PCC-M40 ) pavement over existing surface with OPC 43 grade cement at 400 kg per cum and as per IRC:SP -76, course and fine aggregates confirming to IS 383, maximum size of aggregate not exceeding 25 mm, max water cement ratio is 0.4, mixed in a batching and mixing plant as per approved design, transported to site, laid with a fixed/ slip form paver, spread, compacted and finished in a continuous operation including provision of contraction joint, joint filler, sealant primer, joint sealant, admixtures as approved, curing compound, finished to lines etc. and grades as per drawing.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern.gs, balconies and access platform.

S/ fixing sign board at site +all comp of work