Annual Rate Contract For Repairing, Maintenance and new work of footpath & watertable, divider, chainlizer, traffic island, activity area, P.C.C and laying cement concrete Guard Stone and Setting/Resetting stone paving/ Pever block. work in Sub Zone-2 in South Zone-A (Udhana)

Name of Work:- Annual Rate Contract For Repairing, Maintenance and new work of footpath & watertable, divider, chainlizer,

traffic island, activity area, P.C.C and laying cement concrete Guard Stone and Setting/Resetting stone paving/ Pever block

work in Sub Zone-2 in South Zone-A (Udhana)

Sr. Item Quantity Rate Unit Amount

1 Box cutting the road surface to proper slop and camber for road work including a base for road

work including removing the excavated stuff depositing on the road side 525.00 109.41 CM

to a slop as directed up to 50.0 mt. Lead. (SOR 2024-25)

2 Preparation of subgrade with compacting. levelling and consolidation of subgrade with

mini roller/plate vibrator machine including watering and filling in depression which occur

during the process. including labour,machinery, equipments required to execute this item 1281 5.03 SM

etc. complete as detailed in tender specification & as directed by engineering charge.(SOR

3 Providing & Laying C.C 1:5:10 (1cement :5coarse sand :10 graded stone agg.

40 m.m Nominal size )& curing comp. excl. cost of from work in :Foundation & 80.00 2606.92 CM

Plinth (SOR 2024-25)

4 Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg

20m.m Nominal size)&curing comp. excl. cost of form work in :(a) foundation 290.00 3095.26 CM

& Plinth (SOR 2024-25)

5 Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand: 3 graded

stone agg. 20 mm nominal size) finishing smooth curing etc. comp. Incld.

Cost of form work but excl. Cost of reinforcement for R.C.C. Work in : Up to 45.00 8174.41 CM

G.L./P.L.(A) BEAM :(ii) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt (SOR

6 Supplying and filling fine sand (Pana/Stone Dust/Crush sand) in 25/75 mm Avg.)

compacted thickness over the base including necessary compaction, watering etc.

complete. item includes levelling by using mini rollar/plat vibrator machine and as per 740.00 480.00 CM

details in tender specification & as directed by engineer in charge.(SOR 2024-25)

7 Providing 100mm thick readymade C.C. kerb of strength M-20 (size 300mm

x 380mm) purchased from SMC's approved paverblock manufacturer &

setting in line, level and in truly vertical position, including filling joints in C.M.

1:1 (1 part of cement : 1 part of stone dust) smooth pointing in C.M. 1:1 (1

part of cement : 1 part of coarse sand) including watering etc. complete and

as directed by engineer in charge.(SOR 2024-25)

(A) For rounding at edge of footpath( For fanning portion) 475.00 274.00 RM

8 Providing and fixing C.C M 20 Grade Pre cast finshed surface Kerb stones of approved

design including the cost of form work (as directed by enginner in charge),curing

etc.complete. The rate shall also inclde for errecting and fixing the pieces in position with

necessary equipments and materials and include the flush pointing in CM 1:2 for all joints

of the kerb stones.( Sample must be approved) (SOR 2023-24)

Kerb type A 400.00 90.90 No.

Kerb type D 300.00 65.65 No.

9 Providing interlocking type Rubber moulded cement concrete paver block

of approved shape, design & colour having 60mm thickness (M-35)

purchased from SMC's approved paverblock manufacturer only & fixing of

fine sand bedding. Item includes levelling by using vibratory plates compacted machine.

Item also includes all materials, labour, equipments, tools, plants, watering, cleaning etc.

complete. Without colour (SOR 2024-25)

With colour 850.00 524.00 SM

With Colour (Produced by C&D waste) 0.00 517.00 SM

Without Colour (Produced by C&D waste) 0.00 481.00 SM

10 Providing & fixing interlocking type Cement Concrete paver block of approved shape &

design having 60 mm thickness (M-40) purchased from SMC's approved paverblock

manufacturer only on fine sand bedding. Item includes leveling by using vibratory plates

compacted machine. Item also includes all materials, Labour, euipments, tools, plants, 750.00 553.00 SM

watering, cleaning etc. complete. (SOR 2024-25)

For Road Junction 80 mm thick (M-50) 220.00 714.00 SM

11 Removing and resetting Existing paver block, including all watering leveling, cleaning,

labour & Equipments chagres etc. complete as per details in tender 520.00 102.00 SM

specification & as directed by engineer in charge. MR

12 Dismantling of structures on roadways, including disposal of unserviceable material free

of cost in permanent work as directed by the engineer with all leads and lifts etc. 540.00 639.72 CM

complete.(A) Unreinforce Cement Concrete (SOR 2024-25)

13 Demolition including stacking of serviceable materials and disposal of unserviceable

materials with all lead and lift (i) RCC work (SOR 2024-25) 350.00 1110.75 CM

14 Providing & fixing IS Mark TMT Bar FE 500D reinforcement for R.C.C. work

incl. bending, binding & placing in position etc. comp. Upto G.L./P.L. (SOR 2024- 210.00 76.21 KG

15 Providing and fixing rebar of following diameter using chemical grout of

Swanchore/Hilti/Fischer or equivalent make including cost of all equipments,

tools, material, labour, etc. Standard procedure as mentioned in

manufacturer's specifications shall be strictly followed, which shall be

submitted and got approved from the authority prior to start of work. The rate

shall also include cost of drilling of hole of required diameter and depth as

mentioned in manufacturer's specification, cleaning the hole with required air

blower and other necessary tools and tackles, positioning, providing and

grouting chemical, allied fixtures and fasteners, etc. but excluding the cost of

reinforcing bar etc. complete. Item includes necessary scaffolding, staging,

labour, tools and equipments, etc. complete as directed by the engineer-incharge. (SOR

16 Excavation for 27 cm wide and 25 cm deep Gishi in Ashpalt Bitumeneous road for erection of

concrete wall as a road devider and removal of all excavated materials /

asphalts etc. from the site as per details in tender specification & as directed by engineer in 250.00 29.25 RM

charge at the cost of contractor. (M.R)

17 Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4 graded stone

agg. 20 mm nominal size)& curing comp. Includ.cost of form work but exclu.

Cost of reinforcement for reinforced concrete work in : (A) Foundation, 340.00 3741.69 CM

footing, Base of columns and Mass concrete. (SOR 2024-25)

18 Applying Priming coat over new steel and other metal surface after over and including

preparing the surface by throughly cleaning oil, grease dirt and other foreign matter and

scoured with brushed fine steel wool, scrapers and sand paper with ready mixed priming paint 310.00 35.00 SM

brushing red lead.(SOR 2024-25)

19 Painting two coat (excluding priming coat) on new steel and other metal surface

with synthetic enemal paint, burshing to give an even shade including cleaning the 280.00 65.31 SM

surface of all dirt, dust and other foreign matters.(SOR 2024-25)

20 Painting one coat (excluding priming coat) on Previously Painted steel and other

metal surface with synthetic enemal paint, burshing to give an even shade including 200.00 38.03 SM

cleaning the surface of all dirt, dust and other foreign matters.(SOR 2024-25)

For every subsequent coat Extra over item no.above 100.00 38.18 SM

21 Painting two coats of enamel paint over priming coat (including priming coat) on

wall after removing entire surface dirt, dust foreign matter & also incl. preparing the

surface even & sand papered smooth etc. comp.(M.R.)

22 Painting two coats of enamel paint (Excluding priming coat) over previously painted

wall after removing entire surface with even shade & surface after removing dirt, dust 270.00 60.00 SM

foreign matter etc. comp.(M.R.)

23 Providing & applying two coats of weather shield max paint (3 coats may be required

in case of darker colours.)of ICI Dulux or Apex Ultima of Asian Paint including applying

exterior acrylic primer coat as per manufacturers specification and directions in shade and

colour approved by architects, on exterior surfaces of the building including scaffolding,

preparing the surface, watering, curing etc. complete and as directed by the architects and

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae

and flaking paint. This can be achieved by brushing with a wire/ stiff coir brush, followed by 180.00 82.00 SM

water jetting if required. Fill up all minor cracks and defects with white cement and sand

mixture in the ratio 1:3. For application on previously painted wall, previous coatings of paint

must be thoroughly scraped off and Clean the surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5 hours. Application of

putty is not recommended. Minimum 4-6 hours duration is required between each coat of

weather shield max paint (M.R.)

24 Filling in foundation and plinth with murrum or selected soil in layers of 20cm.

thickness including watering, ramming and consolidating etc. complete. (SOR 2024-25) 210.00 301.78 CM

25 Providing & fixing M.S.Grills of required pattern to wooden frames of windows

etc. At all floor levels with M.S. flats at required spacing & frame around

square or round bars with round headed bolts & round headed bolts and nuts 25.00 109.41 KG

or by screws incl. Priming coat of Red lead paint etc. comp. (A) Plain grill For

all Floors.(SOR 2024-25)

26 Providing & laying cement concrete 1:4:8 (1 cement:4 coarse sand:8 graded

stone agg. 40 mm nominal size) & curing comp. excl.cost of form work in (A) 230.00 2769.69 CM

Foundation and Plinth (SOR 2024-25)

27 Providing and laying chequered precast concrete tiles 22mm thick with

aggregate of sizes upto 6mm in floors treads of steps and landing on 20mm

thick bed of C.M. 1:6 (1 cement : 6 sand) or L.M. 1:1.5 (1 Lime putty : 1.5 140.00 545.76 SM

sand) jointed with neat cement slurry with pigments to match the shade of the

tiles. (SOR 2024-25)

28 Removing & resetting existing readymade c.c. kerb stone of required size & thickness in

line level and in truly vertical position including filling joints in C.M. 1:1 (1 part of cment :

1 part of coarse sand) incliding watering etc. complete and as directed by engineer in 370.00 56.00 RM

29 Providing and setting 35 to 50 mm thick rough kotah stone paving for work in line, level

and in proper gradient includng 25mm thick bedding in

C.M. 1 : 6 (1 part of cement : 6 part of coarse sand ) with sufficient ramming

consolidation.providing joints in C.M.(1part of cement :3 part of coarse sand) and smooth 150.00 312.57 S.M

pointing in C.M.1:1(1part of cement :1 part of coarse sand) including watering etc

complete.(SOR 2023-24)

30 Providing and setting 50 to 60 mm thick rouge kotah stone water table in line, level and in

required gradient including 25 mm thick beddcing in C.M. 1:6 (1 Part of cement : 6 Part of

coarse sand) with sufficient ramming consolidation. Providing joints in C.M. 1:3 (1 Part of

cement : 3 Part coarse sand) and smooth pointing in C.M. 1:1 (1 Part of Cement, 1 Part of

coarse sand) including watering etc. complete and as per details in tender specification & as

directed by engineer in charge.(SOR 2024-25)

Size : 1' x 1'(40 to 50 mm thick) 180.00 125.88 R.M

31 Removing & resetting existing ready made C.C.Kerb of strength of required size &

thickness in line,level and truly vertical position ,including filling joints in C.M.1:1(1part of

cement 1 part of coarse sand) smooth pointing in C.M.1:1 350.00 56.00 R.M

(1part of cement : 1 part of stone dust )including watering etc.complete as directed by

engineer-in-charge.(MR)

32 Removing and resetting rough kotah stone for work in line, level and proper gradient

including 25mm thick bedding in C.M 1 : 6 (1 part of cement : 6 part of coarse sand )

with sufficient ramming consolidation.providing joints in M.(1part of cement :3 part of 400.00 155.51 S.M

coarse sand) and smooth pointing in C.M.1:1(1part of ement :1 part of coarse sand)

including watering etc complete.(SOR 2023-24)

33 Removing and resetting existing rough kotah stone water table for footpath in line, level

and proper gradient including 25 mm thick bedding in CM 1:6 (1 Part of Cement, 6 Part of

coarse sand) with sufficient ramming, consolidation, Providing joints in C.M. 1:3 (1

Cement : 3 Coarse sand) and smooth pointing in C.M. 1:1 (1 Cement : 1 Coarse sand) 580.00 63.89 R.M

including watering etc. complete as per

details in tender specification & as directed by engineer in charge.(SOR 2024-25)

34 Providing and fixing in position readymade cement concrete Water Drain Channel (

x 300 x 80 mm ) M- 30 Grade with all labour, material, testing charge etc. complete as per

details in tender specification & as directed by engineer in charge.(SOR 2024-25) 120.00 189.00 R.M

Readymade water drain channel (600x300x100) 110.00 353.00 R.M

35 Providing and laying cement concrete cast-in-situ Guard Stone (1:1/2:3) (1 cement : 1/2

coarse sand : 3 graded stone aggregate of 20 mm nominal size) including cost of form

work including, curing labour,machinery, equipments

required to execute this item etc. complete.(SOR 2024-25)

36 Providing and laying cement concrete cast-in-situ Guard Stone (1:2:4) (1 cement : 2 coarse

sand : 4 graded stone aggregate of 20 mm nominal size) including cost of form work

including, curing labour,machinery, equipments required to execute this item etc.

complete.(SOR 2024-25)

37 Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3 graded

stone agg. 20 mm nominal size)& curing comp. Includ.cost of form work but

exclu. Cost of reinforcement for reinforced concrete work in : (A) Foundation, 30.00 4250.50 C.M

footing, Base of columns and Mass concrete.(SOR 2024-25)

38 Providing and laying Granular Sub Base (drainage layer)conforming to grading V of

Table 400-1 of each layer not exceeding 200mm thickmess and compacted thickness as per

design & drawing with specified graded stone metal and sand mixed in pugmill and laid

with mechanical means spreading with motor grader and compacting with vibratory roller

having minimum 80-100 kN static weight to

achieve desired density of 98% of MDD including all materials,abour,achinery,tests 300.00 1488.88 C.M

required to be carried out with all leads and lifts etc.,omplete as per details in tender

specification & as directed by engineer in charge.(SOR 2024-25)

39 Providing and fixing C.C. M-25 grade pre-cast Vaccume pressured finished surface

kerb stones of approved design including cost of formwork and mould (as directed by

engineer incharge), curring etc. The rate shall also including for eracting and fixing the

pieces in position with necessary.(SOR 2023-24)

Tree guard ID 500mm, 800 x 800 x 75 mm (Type D) (Set 4) 200.00 672.00 No.

40 Dismantling of structures of roadways, including disposing off unserviceable material free of

cost which will be the owenrship of contractor or as directed by the Engineer with all leads

and lift etc. Including labour, machinery & equipments required to complete this item

etc.(SOR 2024-25)

(A) R.C.C. Pardi 130.00 1110.75 C.M

(B) Removing existing Kotah Stone 95.00 50.11 S.M

(C) Brick / Stone Masonary 70.00 577.92 C.M

(D) Plain Concrete 80.00 639.72 C.M

(E) Bituminious Pavement 62.00 288.65 C.M

(F) Non Bituminious Pavement 80.00 155.25 C.M

41 Providing and laying/fixing cement concrete cast-in situ/Precast kerb in M-20 grade as per

drawing and as per details in tender specification, Purchsed from SMC's approved

manufactures list. Setting in line, level and in truly vertical position, including filling joints

10mm width in C.M. 1:1 (1 Part of cement 1 part of coarse sand) smooth pointing in C.M. 1:1

(1 Part of cement : 1 Part of stone dust) including watering, test required to be carriedout etc.

complete and as directed by Engineer-in-charge). including all leads, lifts, loding & unloding,

watering, labour, tests required to be carried out, machinery, equipments required to execute

this item etc. complete. (HHeight, W-width, t- thickness)(SOR 2024-25)

B Size in mm (H 480 X W 300 X T150) 25.00 380.00 R.M.

42 Supplying and fixing RCC collar (300 mm dia) for tree plantation including all taxes,

carting, loading, unloading etc. complete.with all labour, material charge etc. complete as

per details in tender specification & as directed by engineer in charge.(SOR 2024-25) 30.00 60.00 No.

43 Dismantling of structures on roadways, including disposal of unserviceable material free of

cost in permanent work as directed by the engineer with all leads and lifts etc. 20.00 155.25 C.M

complete.(A) Metalled road (SOR 2024-25)

(B) Asphalt road (SOR 2023-24) 20.00 288.65 C.M

Executive Engineer,

South Zone-A (Udhana)

Surat Municipal Corporation.