AME for preparation of ornamental designs for electrical illumination during Srivari Annual and Navarathri Brahmotsavams and Fairs and festivals etc, in ESD-East,Tirumala for the year 2026-27

Supply of copper wire suitable for LED’s connection purpose.

Supply of 30A water proof SMPS box with fan motors etc., complete with one year warranty

Supply of 25W, 230V (LED) soldering gun

Supply of LED serial sets consisting of 50 to 60 Nos of lamps with copper wires and operated at 220V, 50Hz, AC supply. Colours: Green, Red, Blue, Yellow and white.

Fabrication Charges for preparing ornamental designs with given 6mm / 8 mm / 10 mm Steel duly cutting, bending and welding as per the Drawing drawn on the floor & welding shall be done on the sides of design. Note:-1. Welding Machine Should be Provided by the Fabricator at his own cost. 2. Necessary power supply will be given by Department at free of cost 3. Welding rods will be supplied by departmentally at free of cost. 4. The above rates excluding GST

Fabrication charges for providing necessary back support with 8mm / 10mm / 12mm steel to the design/Cut out duly cutting, bending and welding as directed during execution. Welding shall be done on both sides of design. Note:-1. Welding Machine Should be Provided by the Fabricator at his own cost. 2. Necessary power supply will be given by Department at free of cost 3. Welding rods will be supplied by departmentally at free of cost. 4. The above rates excluding GST

Charges for drawing of figures of Deities, Arches, Various designs through an Artist as directed during execution. Note:-1. Welding Machine Should be Provided by the Fabricator at his own cost. 2.Necessary power supply will be given by Department at free of cost 3.Welding rods will be supplied by departmentally at free of cost. 4.The above rates excluding GST

Only Labour charges for painting the Ornamental designs, cut outs fabricated with steel (Red oxide and Enamel paint will be supplied by departmentally). Note:-1. The rate including the cost of Red Oxide and Enamel paint 2. The above rate excluding GST

Supply of Man mazoors for tying of sets to designs and transportaion of ornamental designs to site etc., works

Supply of 6mm MS Steel

Supply of 8mm MS Steel

Supply of Welding Electrodes 4 mm dia

Supply of Red-oxide primer paint for iron works Grade -I

Supply of ready mixed Synthetic Enamel paints in all shades Gr- I having VOC(volatile organic compound) content less than 50 grams / lit

NOTE (i)The rates are of basic rates excluding GST. (ii) The applicable GST will be reimbursed/paid as per actuals on production of proof. (iii)Statutory deductions will be made as per norms, if applicable. Any modalities imposed on GST by the Government from time to time, the same will be implemented.

Supply of copper wire suitable for LED’s connection purpose.

Supply of 30A water proof SMPS box with fan motors etc., complete with one year warranty

Supply of 25W, 230V (LED) soldering gun

Supply of LED serial sets consisting of 50 to 60 Nos of lamps with copper wires and operated at 220V, 50Hz, AC supply. Colours: Green, Red, Blue, Yellow and white.

Fabrication Charges for preparing ornamental designs with given 6mm / 8 mm / 10 mm Steel duly cutting, bending and welding as per the Drawing drawn on the floor & welding shall be done on the sides of design. Note:-1. Welding Machine Should be Provided by the Fabricator at his own cost. 2. Necessary power supply will be given by Department at free of cost 3. Welding rods will be supplied by departmentally at free of cost. 4. The above rates excluding GST

Fabrication charges for providing necessary back support with 8mm / 10mm / 12mm steel to the design/Cut out duly cutting, bending and welding as directed during execution. Welding shall be done on both sides of design. Note:-1. Welding Machine Should be Provided by the Fabricator at his own cost. 2. Necessary power supply will be given by Department at free of cost 3. Welding rods will be supplied by departmentally at free of cost. 4. The above rates excluding GST

Charges for drawing of figures of Deities, Arches, Various designs through an Artist as directed during execution. Note:-1. Welding Machine Should be Provided by the Fabricator at his own cost. 2.Necessary power supply will be given by Department at free of cost 3.Welding rods will be supplied by departmentally at free of cost. 4.The above rates excluding GST

Only Labour charges for painting the Ornamental designs, cut outs fabricated with steel (Red oxide and Enamel paint will be supplied by departmentally). Note:-1. The rate including the cost of Red Oxide and Enamel paint 2. The above rate excluding GST

Supply of Man mazoors for tying of sets to designs and transportaion of ornamental designs to site etc., works

Supply of 6mm MS Steel

Supply of 8mm MS Steel

Supply of Welding Electrodes 4 mm dia

Supply of Red-oxide primer paint for iron works Grade -I

Supply of ready mixed Synthetic Enamel paints in all shades Gr- I having VOC(volatile organic compound) content less than 50 grams / lit

NOTE (i)The rates are of basic rates excluding GST. (ii) The applicable GST will be reimbursed/paid as per actuals on production of proof. (iii)Statutory deductions will be made as per norms, if applicable. Any modalities imposed on GST by the Government from time to time, the same will be implemented.

(Rupees Eighteen lakhs sixty two thousands one hundred ninety two and paise fifty six only)