REPAIRS AND RENOVATION OF QTR NO.246 IN CF ESTATE

Amount

Demolition of Brickwork or stone/ boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles - only portions ordered to be demolished.

Demolition of Brickwork or stone/ boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles as directed.

Dismantling timber scantlings fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section

Removing and Relaying of Roof tiles, Mangalore pattern, interlocking at side joints, laid dry as directed.

S&F Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6

Dismantling of Plain or corrugated steel sheeting, Any gauge, thickness.

Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete Type C1 1:3:6, built in CM 1:6

Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

Cement concrete type B-1, 1:2:4 (20mm graded aggregate), 70mm thick and finished with cement concrete surface even and smooth using extra cement.

Demolition of reinforced cement Concrete of any description and in any position. (Demolition of existing Cooking platform / other miscellaneous structures / Chimney etc)

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

S/F of Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (incl. for sink made of cuddappah slab)

S/F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heatmoulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F of Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, 100 mm.

S&F of Aluminium anodised, barrel tower bolts of extruded section and fixed 150mm.

S&F of Extruded aluminium alloy handles fabricated type anodised 100 mm.

M&L for Non - Skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl. screed bed in CM 1.6, 15mm thick.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl. screed bed in CM 1.4, 15mm thick, including taking down existing cement or cement lime plaster from the existing surfaces.

Taking down and refixing of Chowkhats or frames exc 1.5 sq.m but n.exc 4 sq. m each in other openings including with shutters (without taking off shutters from the frame) as directed.

S & F vitreous China Squatting pan "Orissa" pattern size 580X440 mm white with integral foot rests, P trap etc completes including proven of time concrete bedding etc. as directed.

S & F PVC (SWR) pipes 110mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors.

S & F PVC (SWR) bends 110 mm dia.

S & F PVC (SWR) bends 110 mm dia with access door.

S & F Reinforced concrete pipes (150 mm), class NP2, laid and jointed complete with collars.

S & F PVC (SWR) multi floor trap (75 mm), plain with grating including jointing with solvent cement as directed

S & F PVC (SWR) pipes (75 mm bore) single socketed, in any length with rubber ring joints, laid in trenches or in floors as directed

S & F PVC (SWR) bends 75 mm dia.

S & F PVC (SWR) bends 75 mm dia with access door.

S & F 15mm Bore dia. chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S&F of Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, fancy type, chromium plated, 15mm.

S & F 15mm Bore dia. Tubes, 'Medium Grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.

S & F of Tubular towel rail, 20mm dia, D type, 60cm long between flanges. (Brand: Johnson, Parryware, Hindware or Equivalent)) as directed.

S&F of Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded.

S&F of Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded.

S&F of Steel ventilator with top hung shutter including hinges, steel peg stay, complete

S&F of glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m, 4mm thick, in each pane for windows and ventilators as directed.

S&F of Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, 0.80mm thick.

M&L for Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, thickness 30mm, using 2nd class hardwood as directed.

M&L for Painting on steel surfaces of any description, over 10cm in width or girth,not otherwise described with one coat of Zinc chorme primer and 02 coats of synthetic enamel paint including preparatory works as directed.

M & L for white washing two coats on old decorated surfaces of walls including preparatory works as directed.

M&L for Painting on Wooden surfaces of any description, over 10cm in width or girth,not otherwise described with 2 coat of synthetic enamel paint including preparatory works (new surfaces) as directed.

M&L for Painting on Wooden surfaces of any description, over 10cm in width or girth,not otherwise described with 1 coat of synthetic enamel paint including preparatory works (old surfaces) as directed.

M & L for white washing two coats on old decorated surfaces of walls including preparatory works as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces, including preparatory works.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding1.5 m in depth for foundation and getting out in hard /dence soil.

Excavating in trenches, not exceeding 1.5 m wide and exceeding 1.5 m in depth for foundation and getting out in hard /dense soil.

M&L for Cement concrete type D-2, 1:4:8 (40mm graded aggregate), 100mm thick as directed.

M&L for Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius, using old size bricks, in CM 1:6.

M&L for Rendering 15mm thick on fair faces of brick work or concrets surfaces in cement plaster 1:4 finished even and smooth using extra cement.

S & F PVC (SWR) vent cowl 110 mm bore as directed.

Providing precast cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves, lintels and similar articles with plain faces as directed. (Mix:1:2:4)

M&L for TMT bars 10mm dia and over cut to length, bent to shape, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

Removing debris, excavated earth etc to a distance of exc. 250 m but n exc. 500 m and depositing where directed.

Taking down carefully copper/aluminium wiring by un screwing from boards/outlets boxes,fittings and fixtures such as switches,sockets,lamp holders, brackets, ceilings fittings, energy meters and regulators(except existing tube light fittings, calling bell and MCB DB ) etc, removing materiels to store for taking credit and making the good disturbed surfaces of walls, floors,etc.as directed by the site incharge

Supply and Fixing of open wiring in PVC heavy duty conduit (minimum 20 mm dia) ISI marked including all accesories with PVC Insulated FRLS copper stranded conductor cables of size 1.5 sqmm 1100 V grade for each One light point or one fan point or bell point etc controlled by one switch, switch board to be mounted flush as directed by site incharge. Make. Havells / L&T / Finolex / v-guard/philips

Supply and Fixing of open wiring in PVC heavy duty conduit (minimum 20 mm dia) ISI marked including all accesories with PVC Insulated FRLS copper stranded conductor cables of size 1.5 sqmm 1100 V grade for additional light point on the same switch /circuit, switch board to be mounted flush as directed by site incharge. Make. Havells / L&T / Finolex / v-guard/philips

Supply and Fixing of wiring for circuit/submain wiring in steel conduit alongwith earth wire ( 2x4.0 sq. mm + 1x2.5 sq. mm earth wire) of FRLS PVC insulated copper conductor, single core cable in surface as required. as directed by site incharge

Supply and Fixing of open wiring for one 3 pin socket outlet, 15/5 amps, independent in PVC conduit heavy duty(20 mm dia) ISI marked including all accesories with PVC Insulated FRLS copper stranded conductor cables of size 2x2.5sqmm and 1x1.0sq mm, 1100 V grade for each power circuit etc from SDB to individual sockets, switch board to be mounted flush as directed by site incharge. Make. Havells / L&T / Finolex / v-guard/philips

Supply and Fixing of ISI marked Switch piano, flush type single pole, one way, 5 Amp. Make: Anchor/ philips/ Minor .as directed by site incharge

Supply and Fixing of ISI marked switch & Sockets combinations 2 in 1, 5 Amps, Flush type, 5 holes type. .as directed by site incharge Make: Anchor/ philips/ Minor

Supply and Fixing of ISI marked switch & Sockets combinations 2 in 1, 3 pin, 5 and 15 Amp, flush type universal. .as directed by site incharge Make: Anchor/ philips/ Minor

Supply and Fixing of ISI marked lamps holders slanting type insulated body,suitable for Baynet cap type lamps as directed by site incharge Make: Anchor/ philips/ Minor

Supply and Fixing of ISI marked Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body .as directed by site incharge Make: Anchor/ philips/ Minor

Supply and Fixing of LED light fitting, 1x9 w /1*10w bulk head luminaries, with lamp holders, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ. .as directed by site incharge

Supply and fixing of bell 230 V AC Single pole Make . Anchor, philips,Minor

Supply and Fixing of ISI marked Bell push, flush type, 5 amp. .as directed by site incharge Make . Anchor, philips,Minor

ACE PROMOTERS

DURAISAMY&CO