Urgent repairs/strengthening to CGI shed and various mechanical/electrical works to be carried out at Lift Irrigation Scheme Unisoo Old.

Amount

Repairs/strengthening to the existing damaged CGI shed by way of earth excavation by manual means for all kinds of soil with required depth including removal of excavated soil, dressing of bed and sides ,dewatering of trenches if any and disposal of excavated soil as directed by engineer incharge all leads.

Providing and laying stone soiling tightly hand packed under foundation footing etc. including ramming and dressing and carriage of material from source to site of work complete in all respect.

Providing and laying in position cement concrete of grade 1:4:8.

Providing and laying in position cement concrete of grade 1:2:4 .

Providing form work of ordinary timber planking so as to give a rough finish incl. Centring, shuttering, strutting etc. including removal of same.

Strengthening of CGI shed using ISA 40× 40×05mm angle 80 feet long.

Providing and fitting of 25 gauge CGI sheets on the roof and side walls of the MS shed. The job includes providing with polymer coated J and L hooks, bolts and nuts and G.I limped washers. Including a cost of approved steel primer and two coats of approved paint on overlapping of sheets complete excluding the cost of purlin,rafters and trusses but including the cost of cutting.

Providing and fitting of suitable size M.S. hinges (08 no.), 03 no pull bolt lock, MS tower bolts (03no) suitable size and heavy duty lock.

Repairs/periodic maintenance of 200 mm foot valve at LIS unisoo old installed on suction by way of extraction of footvalve from their installed position by means of cutting damaged/rusted/worn out bolts The job includes reconditioning of hinges, hinge bolts, weight plate, valve seat, valve body by way of welding, patching, grinding etc. Providing and fitting of rubber insertion cloth replacing the rusted/damaged parts, nuts, bolts, hinges etc as per requirement, cutting the old damaged/rusted MS bars of strainer and providing and fitting of new MS bars. Re-fitting to suction line and testing on full load. The job includes to and fro carriage charges from site to workshop through across a lead of approx. 40 km.

Arresting of leakages to the 200 mm dia mild steel rising main at various spots (05 spots approx. weld length approx.= 500 cm ) by way of grinding, welding and plugging using 4mm thick MS strips with superior quality welding electrodes at site including minor manual earth excavation to facilitate welding at pipe bottom. Strengthening of CGI shed by way of cutting and welding works approximately (200 cm weld, 100 cm cutting) The above job includes cost on account of charges for transportation, welding set, DG set, labour, head load charges, unforeseen items and all tools and tackles required for completion of job.

Fabrication, providing and fitting of 04feet×03feet floor mounted LT panel board fabricated out of ISA 40×40×5 mm fitted with 19 mm ply board supported by two vertical posts in ISA 40×40×5 mm with each leg 04 feet height, one feet embedded in ground duly grouted in cement concrete M15 mix. The job includes providing and fitting of analogue type Voltmeter 0-500 V (01 no.). Ampere meter 0-200A (01 no.), neon type indicating lamps (06 no.) for incoming and outgoing circuits including wiring of suitable amperage as per site requirement including thimbling of reputed make on panel board. The job includes all cost of carriage of material, skilled labour, AC/DC welding set, DG set, nuts, bolts, unforeseen items, tools and tackles as required for completion of job at site.

Fabrication & providing of MS operator sleeping beds by way of cutting and electric arc welding of mild steel angle ISA-40x40x5 with height of 4 feet and each end length to be fitted with gusset plates of size 80mm x 80mmx5mm with following specifications a. 6 feet x 8 feet Intermediate horizontal (in plus shape) supporting fabricated out of ISA-40x40x5 Total length of ISA-40x40x5= 19mtrs@3kg/m= 57kgs Job includes fitting of 6’ X 8’ ply board (19 mm Thick ) to bed and applying of two coats of red oxide primer and two coats of enamel paint and then shifting of same to site after its fabrication at workshop. The Job also includes providing and fitting of Thermocol and versa matting of 48sft. The firm has also to provide bedding of size 6'x8' consisting of matress, two pillows, two bed sheets, two pillow covers, two matress covers. The Job also includes painting of bed in two coats of primer and one coat of enamel paint .

Illumination of pump house by way of: a. Providing and fitting of 09 watt LED lamps (08no.) with batten holders (08 no.) b. Providing and fitting of 1 mm2 Cu wire (30m) c. Providing and fitting of PVC conduit (20m) d. Providing and fitting of 02 no. separate 6-32A DP MCB 240 V 50 Hz control switch for indoor and outdoor lighting.

M/S EURO LIGHT ENTERPRISES

MEER ENGINEERS INDUSTRIAL ESTATE SOPORE