STRUCTURAL CONSULTANCY SERVICE FOR THE WORKS 1 CONSTRUCTION OF GROUND SUPPORT EQUIPMENT SHED FOR MIG 29K/KUB AIRCRAFT AIR ENGINEERING DEPT AT INS DEGA 2 PROVISION OF STORE ROOM TOILET AT NISC T 122

Amount

Structural consultancy job for subject work for the following buildings. (a) Store Room - 15m x 11m = 165 Sqm (i) Scrutiny of soil investigation report and reporting inconsistencies if any. Site visit for understanding the topography and other features critical to structural design. Submission of FEM Model using design software STAAD PRO connect Edition Version 22.10.0.153 (Latest version or higher) with load chart for entire structural components and DBR for approval (ii) Preparation of tables reflecting forces and moments all members aganist all load combinations as applicable for limit state of strength and limit state of serviceability. Grouping the members optimally and designing individual group for limit state of strength and limit state of serviceability. Submission of structural drawings and complete design folder containing structural analysis and design calculations in respect of entire structural components, viz., walls, coloumns, beams, slabs etc. The structural drawings shall be signed by competent structural Engineer duly reflecting his/her qualifications, designation, address etc. The structural drawings and design folder shall be vetted by IIT/ NIT/ AndhraUniversity. The vetting shall be done by structural Engineering faculty duly reflecting his/her qualifications. The vetted documents shall affixed with Institution seal apart from faculty seal (iii) Incorporation of amendments in structural drawings as and when pointed out with missing details / matches / inconsistences up to a period of 3 years from the date of completion of consultancy job, including submission of vetting of amendments by the original vetting Institution in case of major structural alterations.

(b) Preparation and submission of self-sufficent Detailed Architectural Drawings in Auto CAD for the buildings mentioned in Col. 2 as per sound architectural practices / as per NBC Norms / Zonal Specifications and as per approved conceptua]/]lineplans plans shall be of: (a) RCC Framed structure. (b) Roof shall be of RCC. (c) Wall shall be of 200 th PCC block masonry, partition walls shall be of 100th PCC block masonry. (d) Plinth height 450 mm & ceiling height shall be 3200 mm. (e) Flooring shall be of PCC &finishes as per schedule of finishes/ as approved/ as directe.

(A) Structural consultancy job for subject work for the following buildings. (a) Store Room - 48.00 Sqm (b) Toilet Block -41.25 Sqm (i) Scrutiny of soil investigation report and reporting inconsistencies if any. Site visit for understanding the topography and other features critical to structural design. Submission of FEM Model using design software STAAD PRO connect Edition Version 22.10.0.153 (Latest version or higher) with load chart for entire structural components and DBR for approval (ii) Preparation of tables reflecting forces and moments all members aganist all load combinations as applicable for limit state of strength and limit state of serviceability. Grouping the members optimally and designing individual group for limit state of strength and limit state of serviceability. Submission of structural drawings and complete design folder containing structural analysis and design calculations in respect of entire structural components, viz., walls, coloumns, beams, slabs etc. The structural drawings shall be signed by competent structural Engineer duly reflecting his/her qualifications, designation, address etc. The structural drawings and design folder shall be vetted by IIT/ NIT/ AndhraUniversity. The vetting shall be done by structural Engineering faculty duly reflecting his/her qualifications. The vetted documents shall affixed with Institution seal apart from faculty seal (iii) Incorporation of amendments in structural drawings as and when pointed out with missing details / matches / inconsistences up to a period of 3 years from the date of completion of consultancy job, including submission of vetting of amendments by the original vetting Institution in case of major structural alterations.

(b) Preparation and submission of self-sufficent Detailed Architectural Drawings in Auto CAD for the buildings mentioned in Col. 2 as per sound architectural practices / as per NBC Norms / Zonal Specifications and as per approved conceptua]/lineplans plans shall be of: (a) RCC Framed structure. (b) Roof shall be of RCC. (c) Wall shall be of 200 th PCC block masonry, partition walls shall be of 100th PCC block masonry. (d) Plinth height 450 mm & ceiling height shall be 3200 mm. (e) Flooring shall be of PCC &finishes as per schedule of finishes/ as approved/ as directe.

IDDC Engineers Private Limited