Special repairs to Bldg Nos T 10 T 11T 15 T 25 T 26 T 27 T 28 T 29 T 34 T 36 T 37 T 38 OTM Accn and T 166 OR toilet block of 7 Sikh Li under GE NORTH Ambala Cantt

Amount

SCHEDULE A PART I (B/R WORKS)

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings or wall cladding and removal of dismantled material outside defence land complete all as specified and directed.

Supply and fixing of pre-painted galvalume, aluminuim zinc coating, GI based corrugated (SINOSUIDAL PATTERN) steel sheet, 0.50mm thick, conforming to IS-15961, of any colour, having tensile strength of 550 MPa, as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note- The sheets shall have super durable polyester quality paint of approved colour, 150 gm/sqm total on both sides, suitable for exterior application conforming to IS-15965.

Supply and fixing for pre-painted galvalume, aluminuim zinc coating, GI based Plain steel sheet, 0.50mm thick, of any colour, having tensile strength of 550 MPa, as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note- The sheets shall have super durable polyester quality paint of approved colour, 150 gm/sqm total on both sides, suitable for exterior application conforming to IS-15965.

Dismentling structural steel work of any description including doors, gates but excluding framed truss etc complete all as specified and directed.

Material and labour for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and as directed.

Material and labour for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., conforming to Fe-290.Gde-E-165 complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insula tion boardsl slabsl blankets, any thickness, including cover fillets, aluminium frame of any description complete all as specified and directed.

Material and labour for anodised aluminium snap grid frame powder coated work of size 605mmx605mm for false ceiling including fixing of arrangement including hanging. The snap grid shall be consist of aluminium main/cross tee of size 24mm x 32mm x 0.30mm and wall grid angle 15mm x 32mm x 0.30mm thick. The snap grid frame shall be fixed to ceiling with supporting hanger consisting of 4mm dia GI wire with necessary bolt and nuts andf washers including adjustable fastner, including laying 4mm thick designer decorative type asbestos cement ceiling board (E board) including two coats of acrylic emulsion paint over a coat primer all as specified and directed. Make: Armstrong or equivalent make as mentioned in Appendix 'B'. Make of AC board: Everest or equivalent make as mentioned in Appendix 'B'.

Demolition of concrete in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregates), 75 mm thick, as in sub base of floors, finished rough and even to receive floor topping complete all as specified and as directed.

Material and labour for machine cut kota stone slab 18-20 mm thick ( size of each stone not less than 55cm x 55cm), laid in flooring, over and including cement screed bed 15mm thick in cement mortar (1:4) base and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) complete all as specified and directed.

Material and labour for machine cut kota stone slab 16-18 mm thick laid on verticle surface or skirting over and including 10mm thick plaster in cement mortar (1:3) on brick work or concrete surfaces and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) complete all as specified and directed. Note:- Size of slab shall be cut as required.

Material and labour for PCC 1:3:6 type C-1 (using 20 mm graded mechanically crushed stone aggregate), 50mm thick, as in plinth protection/PCC path and paving, laid in panels of area not exceeding 1.20 sqm with 12mm wide joints filled with mastic (using bitumen and sand mixture applied hot in the ratio of 1:3 by weight) formed at the end of each panel and change in direction of plinth protection/PCC Path and paving and finishing the top surface even and smooth without using extra cement complete all as specified and as directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc, complete all as specified and as directed.

Material and labour for brickwork, with old size bricks, straight or curved on plan to any radius, in half brick thick walls, built in cement mortar 1:4 complete all as specified and as directed.

All as above Item No 1.14 but except bricks complete all as specified and as directed. Note: Old serviceable bricks as obtained from serial item No 1.56 hereinbefore shall be reused after cleaning the tiles. The rate quoted shall include for cleaning the tiles also.

Taking down cement or cement lime plaster, of any description, on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without extra cement all as specified and as directed.

Material and labour for for rough cast plastering including 15mm thick rendering in cement plaster 1:3 complete all as specidied in SSR Part-I clause 14.22 as given. Note: Rough cast finish: After applying under coat of cement mortar 1:3 not less than 10mm thick and while still it is in platic state the rough cast mixture consisting of crushed stone or fine gravel aggrigate. Which is generally of size between 6 to 12 mm depending on texture required mixed with coarse sand and cement in the ration 1:1 shall be applied complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

Material and labour for preparation of newly plastered wall surfaces and applying two coats of cement base paint over 2mm thick wall putty over a coat of primer complete all as specified and as directed.

Material and labour for preperation of newly plastered surfaces of walls and applying two coats of oil bound distemper with painting roller over 2mm thick wall putty complete all as specified and as directed.

Material and labour for complete removal of existing treatment on old/existing wall surfaces by using appropriate technique as approved by Engr-in-charge and applying two coats of cement base paint over 2mm thick wall putty over a coat of primer complete all as specified and as directed.

Material and labour for complete removal of existing treatment on old/existing wall surfaces by using appropriate technique as approved by Engr-in-charge and applying two coats of oil bound distemper with painting roller over 2mm thick wall putty over a coat of primer complete all as specified and as directed.

Taking down chowkats or frames with shutter, area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.

Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (without taking off shutters from frame) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.

Supply and fixing of factory made UPVC white powder coated sliding window two track made of extrudedprofiles with wall thickness of 2.3mm (+- 0.2mm), window profile with hollow section with multi chamber, frame (88mm x 52mm), sash (42mm x 67mm), sliding interlock (one vertical length in each shutter) (45.5mm x 28mm), glazing bed (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including drilling holes for fixing hardware and drainage of water etc. Making arrangement for fixing of hardware, EPDM gasket, 12+-0.2mm thick galvanised steel frame (30mm x 18mm) 2 nos., sliding sash (30mm x 18mm), sliding mesh sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fastners, hardware: touch lock of Zinc alloyed (white powder coated), steel roller system, aluminium track on bottom rail for two track sliding frame wool pine for sliding Sash and interlock complete, all as specified and as directed. Note: (i) The unit rate quoted by the contractor includes all other connected accessories for completion of this item. (ii) Net opening shall be measured. (iii) Wire gauge shall be measured and paid separately.

Supply and fixing of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and /or reiveted, or gorget into spike, framed guard bars, barred iron doors, ladders, framed baluster, walk ways, railings, framework of water tanks/cooler stand and similar work conforming to Fe 290, Gde-E-165 complete all as specified and directed.

Supply and fixing of factory made UPVC white colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm (4-0.2mm). Window profile withhollow section with multi chamber, Frame (60mm x58mm). Sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion selded at all cornders, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of h ardware. EPDM gasket. 1.2 0-2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm), T Profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 10 mm long fasteners. hardwar: (Casement dooe handle made of zinc alloyed (White powder coated), Corner striker, Sccondary Strikers. Cylinder, Door transmission gear made of mild steel with multi point locking system with strikers. 3D Hinges of zinc alloyed (white powder coated) complete, all as specified and as directed. Note: The unit rate coated by the contractor includes all other connected accessories. Net opening will be measured for payment purpose.

Supply and fixing of sheet glass, 5mm thick tinted, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm. in each pane complete all as specified and directed.

Supply and fixing of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Material and labour for preparing new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of approved colour synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Material and labour for preparation of new steel surfaces, of any description not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint, over a coat of red oxide zinc crome primer complete all as specified and as directed.

Supply and fixing in repairs of curtain rod, 20mm dia, brass chromium plated and fixing with decorative brackets and finial at the end complete all as specified and directed.

Material and labour for preparation of old steel surfaces, of any description not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint, over a coat of red oxide zinc crome primer complete all as specified and as directed.

Demolition of reinforced cement concrete in roof, floors (other than ground floor), beams, stair case, landing, chhajas and similar suspended work complete all as specified and directed.

Material and labour for reinforced cement concrete (1:2:4) type B-1, using 20mm graded stone aggregates, as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Demolition of unreinforced cement concrete of any description and in any position such as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

Material and labour for PCC (1:2:4) type B0 (using 12.5mm graded stone aggregates) as in coping, benching, bed blocks and the like including necessary form work and weathering, slightly rounded or chamfered angles and throating and finishing exposed surfaces of concrete fair and even complete all as specified and as directed.

Material and labour for mild steel TMT bars, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for mild steel TMT bars, 8mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for use and waste of formwork to sides and soffits of roof beams, cantilever, bressummers lintels, shelves including supports and similar work for rough finished flat surfaces of concrete complete specified and directed.

Material and labour for use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide, for rough finished, flat surfaces of concrete complete all as specified and as directed.

Material and labour for premium quality, joint free, non skid coloured ceramic tiles (Square/rectangular), area of each tile exceeding 0.18 sqm and not exceeding 0.36 sqm and 7 to 8 mm thick, laid in floor over and including cement screed bed 15mm thick in cement mortar (1:4) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface complete all as specified and directed.

Material and labour for premium quality, printed glazed coloured ceramic tiles of size 350 x 450 x 7mm thick on vertical surfaces of walls over and including 10mm thick rough finished plaster in cement mortar (1:3), set, jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

Taking up or down 20mm bore, steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 15mm bore, steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Supply and fixing of GI tubing, ISI Marked, 20mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and fixing of GI tubing, ISI Marked, 15mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and fixing of stop valves, 15mm bore, fancy type, chromium plated, with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. Note : Weight of stop valve shall not be less than 0.575 Kg

Supply and fixing of stop valves, 15mm bore, fancy type, chromium plated, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. Note : Weight of stop valve shall not be less than 0.575 Kg

Supply and fixing of bib taps, 15mm bore, long body, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule or union and fixed complete all as specified and as directed. Note : Weight of bib tap shall not be less than 0.575 Kg

Supply and fixing of PVC connections, 450 mm long and 15mm dia with brass nuts and PVC washers on both ends complete all as specified and directed.

Supply and fixing in repair, vitreous china wash hand basin, white colour, flat back, of size 550x440mm, ISI marked, with 2 Nos.CI brackets embedded in cement mortar 1:4, PVC waste pipe, 45cms long, fixed to walls, 15mm dia PVC connections and chromium plated waste coupling, etc., complete all as specified and directed.

Supply and fixing in repairs of 15mm bore pillar tap, chromium plated, cast copper alloy with capstan head, screwed down, high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks complete all as specified and directed.

Supply and fixing in repairs, vitreous china squatting pan of Orissa pattern, size 580mmx440mm, white (Ist quality) with ‘P’ or ’S’ trap, with front or back inlet and integral foot rests of any pattern including provision of lime concrete bedding for fixing complete all as specified and directed.

Supply and fixing in repairs of 10 litre capacity, virgin polypropylene cistern, ISI marked, coloured, low level, valveless syohonic action type, complete with PVC bend/flush pipe and making all connections including making good the disturbed surface to match with the existing surface complete all as specified and directed.

Supply and fixing in repairs of PVC floor trap, 100mm size, with CP grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete all as specified and directed.

Supply and fixing of 110mm dia UPVC soil, waste, drain pipe, type ‘B’, conforming to IS 13592-1992, single socketed, in any length, with rubber rings joints or jointed with solvent cement, fixed to walls complete all as specified and as directed. Note- Rubber rings for pipes and fittings shall conform to IS 5382-1985.

Supply and fixing of PVC (SWR) bends,110mm bore, of any radius complete all as specified and directed.

Dismantling overhead water tanks of capacity exceeding 250 litres and not exceeding 500 litres complete all as specified and directed.

Supply and fixing in repair, water storage tank of 500 ltr capacity, HDPE double layer, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore complete all as specified and directed. Note:- Make of tank shall be engraved on the tank.

Supply and fixing of ball brass valves, 20mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Supply and fixing of stop valves, 15mm bore, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply and fixing of stop valves, 20mm bore, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4 ) type B-1 smooth finished, and reforming benching as required for pipes of internal dia of 100mm complete all as specified and directed.

Supply and fixing of brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth and getting out in soft/loose soil for foundation etc of manholes, cess pits, shaft wells, etc complete all as specified and as directed.

Returning filling in, in soil, including spreading leveling watering and well ramming in layers not exceeding 25 cm each complete all as specified and as directed.

Removing excavated spoil/materials to a distance not exceeding 50 metre and depositing where directed at level not exceeding 1.5 above the starting point complete all as specified and as directed.

Material and labour for hardcore of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick (compacted thickness) rolled, watered and well rammed to a true surface complete all as specified and as directed.

Material and labour for PCC (1:4:8), type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

Material and labour, for vibratory compacted, precast cement concrete rubber moulded, coloured (except grey colour), interlocking designer paver blocks in milano shape, confirming to IS-15658-2006 of 60mm thickness, M-35 grade, as in path, hard standing, etc. laid over and including 50 mm thick screed or bedding layer of sand, complete all as specified and directed.

Material and labour for precast cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregates, in window or door cills, lintels, bressumers, string courses, copings, kneelers, apex stones, pier caps, colunms, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling) corbels, brackets, etc. (of any section indicated), with plain fair faces, mcludillg chamfers/weatherings, throating etc. and setting in mortar cement mortar (1:4) with joints to match and set in complete all as specified and directed.

Supply and fixing of 110mm dia UPVC soil, waste, drain pipe, type ‘B’, conforming to IS 13592-1992, single socketed, in any length, with rubber rings joints or jointed with solvent cement, laid in trenches complete all as specified and as directed. Note- Rubber rings for pipes and fittings shall conform to IS 5382-1985.

Material and labour for plain cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregates, as in coping/paving including use and waste of formwork complete all as specified and directed.

Material and labour for plain mild steel wire, 4mm dia, galvanised class 3, in fencing including straining and fixing to wood, concrete steel posts and/ or to Supply and fix straining bolts, including securing with and provision of galvanised iron tying wire, gaIvanised. iron staples or steel pins, etc. as directed (each line of wire to be measured) complete all as specified and as directed.

Material and labour for rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.

Material and labour for mild steel rag lewis bolts, with 12mm dia of neck, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged lewised, exceeding 30cm long complete all as specified and directed.

Material and labour for cutting holes into or through brick walls, built in cement mortar, of required superficial area not exceeding 150 sq. cm, and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

Supply and fixing of door closer hydraulically regulated, universal type, designation No. 03, suitable for door shutter of weight 60 to 80 kg and fixed complete all as specified and directed.

Supply and fixing of 12mm thick prelaminated particle board fixed to UPVC shutter inclusive of rubber board/UPVC beeds as required complete all as specified and directed.

SCHEDULE A PART II (E/M WORKS)

Taking down carefully any type of point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, regulators, sockets, tube light fittings with all accessories etc., and/or drawing out from existing conduit/batten and removal of materials from site and making good the disturbed surfaces of wall, floors, ceiling etc to match with the existing surfaces with matching OBD/White wash/Distemper complete all as specified and as directed.

Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLS-H, 1100 volts, ISI marked, PVC insulated and unsheathed stranded cable drawn through and including non metallic, medium grade PVC concealed conduit not less than 20mm dia and its fittings including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes, ISI marked including mild steel sunken boxes, made out of 1.6mm thick mild steel sheet, with earth dolly, coated with two coats of anti corrosive paint over a coat of red oxide primer internally, covered with modular decorative cover plate for fixing of switches, socket outlets, fan regulators etc. including 1.5 sqmm single core PVC insulated and unsheathed FRLS-H cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dolly with suitable size of lugs complete all as specified and directed for one light point/ bell point/Wall mounted fan/ceiling fan/exhaust fan controlled by one switch complete all as specified and as directed. Notes :- (i) Switch, socket and fan regulators to be measured and paid for separately. (ii) PVC Conduit conforming to IS 9537 part I & III. (iii) All chases will be cut by chase cutter only. Make of PVC Conduit- Finolex, Polycab, Kalinga Premium Make of PVC wire- Finolex, Polycab, Havells

Description all as per Srl item No.2.02 here in before but for one 3 pin socket outlet point 5 Amp on Independent board.

Description all as per Srl item No.2.02 here in before but for one 3 pin socket outlet point 5 Amp on same board.

Description all as per serial item No.2.02 above, but with 4 Sqmm PVC, FRLS-H, unsheathed, multistranded cable, for one socket point 15 Amps, 1100 volts grade, ISI marked, including 4 Sq mm size, green colour, PVC insulated FRLS-H, continuous copper earth wire and connected to common earth dolly complete all as specified and as directed. Note- Switch, Socket shall be measured and paid separately and Steel junction boxes shall be used wherever junction boxes are to be fitted.

Supply and fixing of switch, modular, 6 Amp, one way, one module, 230 volt complete all as specified and as directed. Make: Legrand(Arteor)/ Schenider (Zencelo)/ Hager(Insista).

Supply and fixing of switch, modular, 16 Amps, one way, one module, 230 volt, complete all as specified and directed. Make:Legrand(Arteor)/ Schenider (Zencelo)/ Hager(Insista).

Supply and fixing of socket, modular, 2/3 pin, 5 Amps, one way, two module, 230 volts complete all as specified and directed. Make: Legrand(Arteor)/ Schenider (Zencelo)/ Hager(Insista).

Supply and fixing of socket, modular, 2/3 pin, 6/16 Amps, combined, one way, two module, 230 volts complete all as specified and as directed. Make: Legrand(Arteor)/ Schenider (Zencelo)/ Hager(Insista).

Supply and fixing of electronic fan regulator, modular, 100 watt, two module suitable for ceiling fan, any type/make/sweep complete all as specified and as directed. Make:Legrand(Arteor)/ Schenider (Zencelo)/ Hager(Insista).

Supply and fixing of ceiling rose surface bakelite 65x50mm, two to three terminals complete all as specified and as directed. Make: SSK/Anchor/Fine

Supply and fixing of lamp holder, insulated body, with back plate for angular batten fittings with one PVC block of size 75mm x 75mm for mounting the fittings with and including one LED 9 watt lamp complete all as specified and as directed. Make: Anchor/Fine/SSK. Make of LED Bulb: Siska/Philips/Crompton

Supply and fixing of MCB, single pole, 240 volts, 50Hz, breaking capacity 10KA, 'C' curve, 6 to 40 Amps, ISI marked including taking down and removal of old unserviceable MCB of any capacity and type complete all as specified and as directed. Make- Siemens/Schenider Acti 9/Hager Nevello Plus/Legrand

Supply and fixing of RCBO, 40 Amps capacity , 2 module, 300mA (HI immunity) sensitivity, 230 volts, 50 Hz, ISI marked including taking down and removal of old unserviceable RCBO of any capacity and type complete all as specified and directed. Make- Siemens/Schenider Acti 9/Hager Nevello Plus/Legrand

Supply and fixing in repair of over voltage release, 230 volts, single phase, in one module suitable for single phase complete all as specified and directed. Make- Legrand/Schenider/Hager Cat Part No. MZ209

Supply, insatallation, commissioning and testing of distibution board for MCBs, SPN, 8 way, acrylic double door, IP 43, as per IS 8623, 240 volts, with and including 200 amps fully insulated copper bus bar fixed on wall duly grouted in solid block wall with and including copper lugs/thimbles duly crimped for connection including taking down and removal of old unserviceable MCB DB of any capacity, size and type complete all as specified and directed. Make- Siemens/Schenider Acti 9/Hager Nevello Plus/Legrand

Supply and fixing of DB, vertical type, 4 way, TPN, double door, powder coated with and including 200 Amps rated bus bar suitable for and including MCCB TPN 100 Amps including wiring for fixing MCB and connecting using of copper timbles/lugs of rating of MCB TPN complete all as specified and directed. Make- Siemens/Schenider Acti 9/Hager Nevello Plus/Legrand

Supply and fixing of indoor decorative surface mounting LED tube light fitting, batten type, with poal diffuser, high efficient aluminium housing body in CRCA body suitable for LED tube, high efficient, AC 220-240 volts, 50 Hz with and including 18/20 watt LED tube rod luminaries (warm/cool as per site requirement), environment friendly, high efficient, T8 with aluminium extrusion, heat sink and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light fitting including disconnecting and taking down of existing light fitting and removal complete all as specified and as directed. Make: Havells Cat Part (Fitting)- REGAL BATENT8 4TPO 1x22WSSBSWH, Tube: CRYSTAL 1213 T8DSTL 20WLED865SGLASS, Wipro Cat Part (Fitting) No-WI0921208, Tube: LC13181, Philips Cat Part (Fitting) No--TMC501 1xT-LED 22W P3241, Tube: 20W865 T8 INDI-2100Lm

Supply and fixing mirror light, 9/12 Watt LED wall fixture light luminaire, compact and energy efficient, epoxy powder coated, CRCA sheet including disconnecting and taking down of existing light fitting and removal complete all as specified and as directed. Make: Havells Cat Part No- LUMILINEBS9WLED830SPCWH, Wipro Cat Part No-LL20-111-XXX-65-NE, Philips Cat Part No--BN 021 LED10S-6500 PSU GR S1

Supply and fixing of LED security light luminaire 45 watt , made up of die cast aluminum housing with black epoxy powder coatingwith cover heat resistant glass, safety input voltage range 170 to 270 Volts, IP66 protection, including service brackets of GI pipe 32mm bore medium grade of length 0.90 metre with MS clamps, bolts, nuts and washers and suitable reducer for connecting to GI pipe as required at site and making all required electrical connections using cable including disconnecting and taking down existing light fitting and removal complete all as specified and as directed. Make: Havells Cat Part No ENDURAPEARLNEOSL40WLED757PASYTOPC, Wipro Cat Part No LRO2-45I-XXX-57-XX, Philips Cat Part No BRP409LED 040CWHOMRFGSIPSUGR

Supply and fixing in replacement of recess mounting LED 15/18 watt circular down lighter/spot light designer COB panel with aluminium die cast housing, high efficiency diffuser, 240 volts, 50 Hz, AC supply complete with all accessories, internally prewired including connecting with 3 core flexible copper conductor cable from from ceiling rose to connector of light including disconnecting and taking down existing light fitting and removal complete all as specified and as directed. Make: Havells Cat Part No- EDGEPRORDDLR18WLED840SS, Wipro Cat Part No- LD71-161-SML-65-XX or equivalent in Philips as directed

Supply and laying of cable, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty), 1100 volts grade, with stranded aluminium conductor of size 2 core, 10Sqmm and laying in trenches including disconnecting and taking down of old unserviceable existing cable and removal complete all as specified and as directed. Make of cable: Gloster/Finolex/Havells/Polycab

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth and getting out in soft/loose soil for laying of cable complete all as specified and as directed.

Returning filling in, in soil, including spreading leveling watering and well ramming in layers not exceeding 25 cm each complete all as specified and as directed.

Removing excavated spoil/materials to a distance not exceeding 50 metre and depositing where directed at level not exceeding 1.5 above the starting point complete all as specified and as directed.

Material and labour for fine and dry sand, cushioning for underground cable, by providing a layers of sand 8cm deep before laying and 15cm deep after laying the cable including stretching the cable and punning sand cushioning complete all as specified and as directed. Note - Punned thickness of sand layer shall only be measured and paid to contractor.

Supply and laying un-reinforced, precast concrete cable cover, class LV type 1, Flat, with peak, size 250 mm x150 mm x40 mm complete all as specified and as directed.

Supply and fixing of light grade, GI tubing, of size 40mm dia, for cable protection and fixed with clamp to pole and wall with nuts and bolts complete all as specified and as directed. Make of GI pipe: Jindal/Tata/Zenith/Oswal/Prakash

Material and labour for new earthing complete with galvanised earth plate electrode 600mm x 600mmx 6mm thick surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level, connected to 4.00 mm GI wire earth lead by means of bolts, nuts, checks nut and washers made out of galvanized iron or steel, earth wire protected by galvanized steel pipe 15mm dia (medium grade) and connected to main switch or main control board all as shown in Electrical Plate No.3 of SSR Part-I & including necessary excavation and earth work in any type of strata, PCC (1:3:6) type C1 in pit, RCC cover slab 50mm thick in 1:2:4 type B-1 using 8mm dia TMT bars @10cm c/c both way with one 8mm dia bar as handle for lifting, 20mm dia GI medium grade watering pipe, funnel, wire wesh, charcoal or coke & salt in alternate layers, etc.all as indicated including testing on completion complete all as specified and directed.

Taking down ceiling or wall fan, sealing cable end, dismantling blades and removing fan and spray painting including filling cavities with filler with two coat of white duco paint after cleaning all dust, writing MES No with black colour permanent marker etc. complete all as specified and as directed.

Hanging only ceiling/wall fan and connecting up including provision of three core flexible cable 23/ 0.0076 size from ceiling rose to connector of fan complete all as specified and directed.

Note:- Amount of credit of Rs. 2,58,348.00 for retrieved materials is mentioned in Schedule of Credit Page Nos.100 & 101 of tender documents in pdf form which will be deducted offline while acceptance of tender.

M/S SHANTI CONSTRUCTION

Bairagi Builders

M/s Mangal Construction Co.

Gupta Enterprises

Sham Sunder Bansal