SPECIAL REPAIRS TO RACQUET AND SPORT COMPLEX BUILDING NO P-23 AT ND SCHOOL, NAVAL BASE KOCHI

Amount

Dismantling plain or corrugated steel sheeting, any guage, thickness including Nainital or similar pattern roof covering complete all as specified and as directed.

Dismantling structural steel work such as brackets for rain water pipe, gutter, gate etc. complete all as specified and as directed.

M&L for Rolled sections Fe -410W Gde 250 bend to shape (Tublar sections) as in main and cross beams, hip and jack rafters; purlins , wall framing ,where connected to common rafters and fixed with angle cleats or other connecting plates etc. complete all as specified and as directed.

S&F prepainted galvalume zinc coating GI based corrugated steel sheet 0.50 mm (TCT) thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws (Anticorrossive screws of make corroshield or equivalent ) all as specified and as directed.

S&F prepainted galvalume zinc coating GI based plain steel sheet 0.50 mm thick (TCT) of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws (Anticorrossive screws of make corroshield or equivalent ) all as specified and as directed.

Taking down eaves gutters and rain water pipes of any size or any pattern including all fittings all as specified and as directed.

S&F 180 mm dia of half round or 180mm width retacangular PVC SWR ready made eaves gutter of pressure rating 6 Kg/cm2 of approved make including necessary fitting like bend fixed with MS clips etc complete all as specified and as directed.

S&F 150 mm dia of PVC (SWR) pipe single socketed in any length with rubber joints including necessary fitting like bend fixed with MS clips etc fixed on walls complete all as specified.

Taking down cement plaster on brick/ concrete walls incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for cement plaster 10 mm thick in cement mortar 1:6 finished even and smooth without using extra cement for internal faces of walls complete all as specified and as directed.

M&L for cement plaster 15 mm thick in cement mortar 1:4 in two coats (10+5) using WPC finished even and smooth without using extra cement for external faces of walls complete all as specified and as directed.

Supply only integral water proofing compound.

M&L for preparation newely plastered internal surfaces and applying two coats of Interior Emulsion (Asian Rayale interior emulsion or equivalent of Berger / Nerolac) over a coat of primer and allowed to dry overnight and applying 3mm thick wall care putty before applying 1st coat of interior emulsion etc complete all as specified and directed. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction. Approval of PMG /user shall be obtained before proceeding to next coat,such as preparation of surface ,primer,emulsion paint Ist coat, 2nd coat etc . Before application of primer coat, the moisture of the wall surface shall be checked with a moisture meter .

M&L for preparation new plastered external surfaces and application of one coat of primer and allowed to dry overnight and applying 3mm thick wall care putty before applying first coat of acrylic exterior emulsion complete all as specified and as directed. Note :- Before application of primer coat, the moisture of the wall surface shall be checked with a moisture meter .

M&L for application of first coat of acrylic exterior emulsion paint ( Asian paint apex ultima proteck or equivalent of Berger /Nerolac )on primed wall surface using rollers made from foam or synthetic fibres,to get a smooth and tint free surface and allowed to dry for at least 8 hrs/ overnight to receive second coat of acrylic exterior emulsion paint complete all as specified and as directed.

M&L for application of second coat of acrylic exterior emulsion paint ( Asian paint apex ultima proteck or equivalent of Berger /Nerolac ) on primed wall surface using rollers made from foam or synthetic fibres,to get a smooth and tint free surface complete all as specified and as directed.

M&L for complete removal and preparation of plastered internal surfaces and applying two coats of Interior Emulsion (Asian Rayale interior emulsion or equivalent of Berger / Nerolac) over a coat of primer and allowed to dry overnight and applying 3mm thick wall care putty before applying 1st coat of interior emulsion etc complete all as specified and directed. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction. Approval of PMG /user shall be obtained before proceeding to next coat,such as preparation of surface ,primer,emulsion paint Ist coat, 2nd coat etc . Before application of primer coat, the moisture of the wall surface shall be checked with a moisture meter .

M&L for complete removal and preparation of plastered external wall surfaces and applying two coats of exterior Emulsion (Asian paint apex ultima proteck or equivalent of Berger / Nerolac) over a coat of primer and allowed to dry overnight and applying 3mm thick wall care putty before applying 1st coat of exterior emulsion etc complete all as specified and directed. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction. Approval of PMG / user shall be obtained before proceeding to next coat,such as preparation of surface ,primer,emulsion paint Ist coat, 2nd coat etc . Before application of primer coat, the moisture of the wall surface shall be checked with a moisture meter . Note for Item No. 13 to 18:- (i) The distempering /Antifungal painting /emulision painting on walls,chajjas,external ceiling,roof projection,steel surfaces,wooden surfaces,stair case and all other parts of building as mentioned in BoQ shall be carried out by OEM /authorised applicator of OEM using modern tools and techniques. (ii) Approval of GE for OEM /auhorised applicator of OEM shall be taken by the contractor within 15 days of acceptance of the contract

Dismantling wall and ceiling boards or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed .

Supply, providing and fixing suspended false ceiling consisting of 8mm thick calcium silicate seamless board suspended on GI framework with staggered joints, GI framework to consist GI perimeter channel 25mmX20mm of 22 gauge along perimeter of false ceiling. Channel section of 50X25mm of 22 gauge and at 300 mm Centre to Centre throughout one way fixed with screw/nut bolt and other direction 40x15 mm 22 gauge channel provided with interlocking with GI cleat and expansion fasteners including hangers 6 mm dia GI fixed to roof truss, boards are to be joined and finished so as to have a flush look which includes finishing the tapered and square edges of the gypsum board with joining compound paper tape and two coat painting with emulsion paint over one coat of primer and one layer of putty 3mm thick in three layers suitable for calcium silicate board( as per the recommendations/ practice) including necessary scaffolding and shuttering complete all as directed as specified

S&F stainless steel towel ring complete complete all as specified and as directed.

M&L for preparation of new surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of anti corrosive Epoxy paint over a coat of Epoxy primer, over a coat of red oxide on steel surfaces complete (Make-Asian Apcolite or Equavalent of Berger, Nerolac)

Taking down chowkats with shutter n.exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified and as directed.

Taking down chowkats with shutter exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutters from the frame) complete all as specified and as directed.

Supply and fixing factory made uPVC (any colour )Casement window double panel with provision for fixing grill with S.S. friction hinges (300 x 19 x 1.9 mm), made of (big series) frame not less than 65 x 80 mm & sash not less than 58 x 118 mm both having thickness of 2.3 ± 0.2 mm and single glass pane glazing bead of appropriate dimension (Area of window upto 1.5 sqm.) comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed . (Glass /decogrill shall be measured and paid separately) Make :-M/s Poly windows , M/s Rajshri plastiwood ,M/s Madhu Industries ,M/s Accura Polytech Pvt Ltd,M/s Finesta building systems.

Supply and fixing factory made uPVC (any colour) Two track two panels sliding window with provision for grill fixing upto 1.50 m height made of (big series) frame not less than 65 x 50 mm & sash not less than 45 x 72 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window upto 2.20 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh /decogrill shall be measured and paid separately) Make :-M/s Poly windows , M/s Rajshri plastiwood ,M/s Madhu Industries ,M/s Accura Polytech Pvt Ltd ,M/s Finesta building systems.

S & F Powder coated anodised aluminium 10mm dia hexagonal channel (decogrill) for grill fixed to upvc window/ventilator frame with aluminium bidding complete all as specifed and as directed. Make : JINDAL or equivalent section from HINDALCO /INDAN A1 COMPANY

S&F 7 to 8 mm thick tinned glass, and glazing with oil putty / beeding in squares exceeding 0.5 sqm each pane fixed to upvc joinery complete all as specified and as directed. Make: M/s Hindustan Pilkinton glass Works Ltd/ M/s Modiguard/M/s Saint Gobin

S&F stainless steel soap dispensor complete all as specifed and as directed.

Supply and fixing factory made uPVC any colour Casement door with 3D hinges made of (big series) frame not less than 67 x 64 mm & sash 67 x 100 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. (Glass shall be paid separately) Make :-M/s Poly windows , M/s Rajshri plastiwood ,M/s Madhu Industries ,M/s Accura Polytech Pvt Ltd, M/s Finesta building systems.

S&F polycarbonate sheet 3 mm thick bend to any shape including aluminum beading with rubber gasket fixed to structural steel frame work (Measured separately) using necessary anticorrosive screws and connectors,filling the gap between frame and wall with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and as directed.

S&F fibre cement board/sheet of any colour design pattern of thickness not less than 10 mm fixed to structural steel frame work (Measured separately) using necessary anticorrosive screws for fasia/eaves board complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification complete all as specified and asdirected.

S&F factory made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile) with wood free EPS, with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, fixed in frame at site as per specification all as specified and as directed.

S&F extruded aluminium alloy handles, 150 mm long fabricated type anodised all as specified and as directed.

S&F alluminium, anodised, barrel tower bolts of extruded section of size 150 mm long all as specified and as directed.

S&F aluminum anodoised sliding door bolt of size 300mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts etc complete all as specified and as directed.

S&F 125mm stainless butt hinges,with stainless steel hinge pin etc complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete and as directed.

M&L for anti-skid rectified ceramic tile of size 400x400x8 mm thick over cement screed 10 mm thick in CM 1:4 with WPC as per manufacturer's instruction over 25 mm thick PCC type B0 1:2:4 levelling course on RCC slab complete and as directed. (Note-WPC shall be measured and paid separately)

M&L for Glazed ceramic tiles in vertical surface 600x300x 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering CM 1:3 complete and as directed.

M&L for mirror polished kota stone slab flooring 20-25mm thick over 15mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 15mm thick cement screed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for 100 mm thick PCC 1:4:8, Type D-2 using 40 mm graded stone aggregate complete all as specified and as directed.

M & L for heavy duty vitrified tiles of any colour design and fixing pattern as approved of size 30x30cmx 10 to 12 mm thick set jointed and pointed in neat cement slurry in floors/steps including screed bed or bedding layer of morter 15mm thick in cm 1:4 complete all as specified and as directed. Make :- Endura of Johnson or equivalent of Kajaria /cera

M&L for providing cement concrete Type B0, 1:2:4 (using 12.5mm graded aggregate) as in kerb including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

S&F PVC (SWR) pipes in 75mm in wall/floor Dis single socketed, in any length with rubber ring joints,fixed to wall / floor complete all as specified and directed.

S&F PVC (SWR) pipes (110mm) single socketed, in any length with rubber ring joints, fixed to wall/floor complete all as specified and directed.

PVC (SWR) bends with acces door any radius 110mm complete all as specified and directed.

PVC (SWR) bends with acces door any radius 75 mm complete all as specified and directed.

S & F for 110mm dia PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and directed.

S & F for 75 mm dia PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and directed.

S & F for 110mm PVC (SWR) vent cowl complete all as specified and directed.

PVC (SWR) junction single, (Single 'T') equal or unequal 110mm with access door complete all as specified and directed.

PVC (SWR) junction single, (Single 'T') equal or unequal 75 mm with access door complete all as specified and directed.

S&F PVC (SWR) couplers 75mm complete all as specified and directed.

S&F PVC (SWR) couplers 100 mm complete all as specified and directed.

S&F in repairs Counter top Basin (Self Rimming) for hand wash flat back of size 550 x 445mm (Make - Parry ware, Cat No.C0131 Counter top or equivalent) fixed on granite platform including all necessary fittings with and including chromium plated hawk E-tap (Make - Parry ware, Cat No.T-7184A1 or equivalent in Jaguar / marc/ Cera/ Kohler) complete all as specified and as directed

S&F in repairs CP brass towel rail 60 cm long fixed complete all as specified.

S&F Electronic flushing system range (Integrated EPS AC with power source) vitreous china urinal white along with waste coupling including fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinals to plugs 60mm long brass screws pointing around urinal back in cement complete all as specified and as directed. • Make: Parry ware, Code- C08097 (Electronic flushing system range) or its equivalent in jaguar / Kohler / Roca.

S&F in repairs Chinaware partition for urinal of size 90 x320 x720 mm all as specified and as directed. Make :- Cera (Cat No:S4090101 or equivalent of Parryware /Hindware.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern), white including plastic water closet seat, cover and mild steel chromium plated or aluminised hinging device, fixing bolts, with ceramic valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float & handle including brackets, PVC connections 15mm size with PTMT nuts of length 600 mm and Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed. Make-(EWC) Parry ware (Cat No-C0258 White) or Cera (Cat No-Cat. No. S1013129 White

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S&F in repairs brass chromium plated bottle trap with inlet or outlet screwed for pipe for connection including necessary packing, union and cap (32 mm bore). make Parryware Cat No- T3203A1/Johnson Cat No- T0060C/Jaguar Cat No- ALD-769L300x190

M&L for providing, 75mm thick cement concrete, Type C1, 1:3:6 (using 20mm graded aggregate) for plinth protection complete all as specified and as directed.

M&L for 10mm thick Bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, for joints between bays complete all as specified and as directed.

M&L for granite slab 18-20 mm thick machine cut , bedded and jointed with grey cement slurry and pointed with white cement admixture of pigment to match the sade of granite stone incl grinding and polishing such as steps, cills ,platform, counter and other similar work including screed bed or bedding layer of mortar 15mm thick in cm 1:4 complete including demolition of existing stone slab etc complete all as specified and asdirected

M&L for demolition of concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) etc complete all as specified and asdirected

M&L for demolition of hardcore of any size and depth in ground floors and pavings all as specified and as directed.

Demolition and breaking up AC drain pipes set in cement mortar all as specified and as directed.

Labour only for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and as directed. ( Hard core retreved from Item No.76 above shall be reused.)

Demolition of brick work built in cement mortar including disposal of debries all as specified and as directed.

Excavating in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation etc n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc 25 cm in soil all as specified and as directed.

Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point all as specified and as directed.

M&L for Cement concrete as in foundations, filling and mass-concrete in PCC 1:4:8,type D2,using 40 mm graded stone aggregate all as specified and as directed.

M&L for Cement concrete in surface channels and drains in pcc 1:2:4 type B1 ,using 20mm graded stone aggregate all as specified and as directed.

Use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed

M & L for RCC 1:2:4 (20mm graded stone aggregate) in walls or retaining walls,basement walls , etc any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed

S&F mild steel TMT bars 10mm dia and over cut to length, bend to shape required including cranking, bending spirally or hooping for column, hooking ends ad binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and directed .

S&F mild steel TMT bars 6mm to 8mm dia cut to length, bend to shape required including cranking, bending spirally or hooping for column, hooking ends ad binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and directed .

M&L for rendering 15 mm thick on brick or concrete surface in cement mortar 1:4, finished even and smooth without using extra cement all as specified and as directed.

M&L for precast cement concrete 1:3:6 type C1 using 20mm graded stone aggregate solid block masonry built in cement mortar 1:4, exc 10 cm in width all as specified and as directed.

M&L for plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregates coping including necessary form work all as specified and as directed.

M&L for 10 mm thick cement plaster with cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as dircted.

S & F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 and hung as gates, including pintle hinges, stops, hand-made sliding bolts included for ornamental and intricate design etc complete all as specified and as dircted.

Demolitioin of reinforced cement concrete of any description and in any position(reinforcement cut to facilitae demolition) and sagregating steel reinforcement to issue under schedule of credit etc complete all as specified and as dircted.

Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified

M & L for reinforced cement concrete Type B1 1:2:4 (20mm graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete in all as specified

Use and waste of formwork to sides of pillars posts ,struts, piers, columns etc all as specified

M & L for reinforced cement concrete Type B1 1:2:4 (20mm graded aggregate) in columns, etc. complete in all as specified and as directed.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde- E- 250) quality- A complete in all as specified and as directed.

M & L for Providing, cement concrete type B1 1:2:4 (20 mm graded stone aggregate rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directedin slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in kitchen shelves and the like beams, cantilevers, lintel etc complete all as specified and as directed .

M&L for fixing mini MP tiles in CM 1:4, 15mm thick complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, in soft/ loose soil complete all as specified and directed.

S&F MS post and struts in fencing including cutting tops to sharp as directed, drilling holes, notching for wire etc and confirming to similar work Fe-290 grade E-165 complete all as specified and directed.

M&L for Plain cement concrete 1:2:4, type B2 (using 40mm graded aggregate) as in foundation, filling & mass concrete complete all as specified and directed.

Supply only Chain link MS galvanised fencing, including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including binding wire complete all as specified and directed.

S & F for MS Tie bars with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches, fencing post and similar work etc. king rods and straining bolts conforming to Fe 290 Gde E-165 complete all as specified and as directed.

M & L for Preparation of new steel surface of any description n.exc 10cm in width or girth and applying 2 coat of anti corrosive Epoxy paint over a coat of Epoxy primer on steel surfaces complete (Make-Asian Apcolite or Equal from Berger, Nerolac)

M&L for fixing brass coated letters of size 10cm in stainless steel and thicknes of 2mm as per the directions of Engineer-in-charge

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. all as specified and as directed.

M&L point wiring using proper colour coding complete with 1100 volts grade 1.5 Sqmm PVC insulated unsheathed FRLSH grade,confirming to IS-694 multistranded single core copper conductor cable in PVC concealed conduit rigid non metallic medium grade of suitable size with all conduit accessories on wall except beam, column and RCC roof and chases cutting incl 2 mm thick MS sheet pressed terminal box (recessed) with 3mm thick laminated hylem top cover incl 1.5 Sqmm PVC insulated copper conductor earth continuity wire green colour for one light/fan point controlled by one switch etc. all as specified and as directed.

All as per item No 105 above but for one 5 pin 5 amps socket outlet on the same board

All as per item No 105 above but for one 5 pin 5 amps socket outlet an independent board.

All as per item No 105 above but with 2.5 Sqmm copper conductor including 2.5 Sqmm copper cable on earth wire for one 6 Pin 16 Amps Socket outlet independent board.

All as per item No 105 above but with 4 Sqmm copper conductor including 4 Sqmm copper cable on earth wire for one 3 Pin 16 Amps Socket outlet independent board.

S&F switch piano flush type 5A one way, complete all as specified and directed

S&F S/S combination 5 pin 5 Amps flush type,complete all as specified and directed

S&F S/S combination 6 pin 15 Amps flush type multi urpose,complete all as specified and directed

S&F ceiling rose surface bakelite 65 x 50mm 3 terminals,complete all as specified and directed

Supply & fix Regal Batten for LED tube lights, both side connection type and LED tube rod 1 x 20 Watt, both side connection all as specified and as directed. Make of batten : Havells Cat Part No. Regal batten 8UPT001X22WSSBSWH / Crompton Cat Part No. IGP131LT8-16 / Philips Cat Part No. TMC501P1XTLED22WP3241 Make of tube rod : Havells Cat Part No. Crystal 1213T8DSTL20W LED 865 GLASS / Crompton Cat Part No. LG-T8-20-865-2 / Philips Cat Part No. Essential LED tube 1200mm 20W865T865T81ND-1

Supply and fix LED street light 35/36 W IP 65 protection including all accessories and suitable GI pipe for fixing on wall including all connection all as specified and dirceted. Make :-Cat Part No. LSTS-36-CDL-M of Crompton or Philips/Havells

S&F 10W LED mirror light fitting with tube and provided with high output diffuser including all electrical connection all as specified and dirceted by Engineer in charge.Cat part no BN 021 LED10S-6500 PSU GR S1 of Philips or Crompton/Wipro

Supply and fixing LED Flood light light 60 W IP 66 protection including all accessories and suitable Clamps for fixing on wall including all connection all as specified and dirceted by Engineer in charge. Cat Part No. LFL-60-CDL/60-M of Crompton or Luker/Philips

Supply & fix in repairs exhaust fans AC single phase 230/ 240 V of size 600 mm sweep, 900 Rpm with louver complete all as specified. Note : Old fans will be deposited to MES Store Yard. Make :- Cat Part No. Turboforce SP of Havells or equivalent of Crompton /Bajaj

Supply & fix in repairs exhaust fans AC single phase 230/ 240 V of size 600 mm sweep, 300 Rpm with louver complete all as specified. Note : Old fans will be deposited to MES Store Yard. Cat Part No. Turboforce SP of Havells or equivalent of Crompton /Bajaj

Supply only Wall mounted fans of size 300 mm sweep AC single phase 230 / 240 V all as specified and directed. Cat Part No. Swing of Havells/Usha/VGuard

S&F in repair Vertical TPN DB with MCCB incomer 04 way suitable for up to 125 Amp MCCB IP-43,415 volts,insulated vertical bus bar with suitable colour including taking down old DB, all as specified and directed.Cat Part No.DBVTL004DD of L&T/Lergand/Inoasian.

S&F Sheet metal enclosure SPN DB when MCB's to be used 8 way with 200 amps bus bar double door complete ,including taking down old DB all as specified and as directed.

S&F MCCB 4 Pole, 100 amp ,415 volts ,16 KA including all electrical connections all as specified and directed Cat part No -CM9051800KO of L&T/ Legrand/Indoasian

S&F MCB TPN 63 amp ,415 volts ,16 KA all as specified and directed Cat part No -BB40630B of L&T or Legrand/Indoasian

S&FMCB SPN 6 to 32 Amp ,240 Volts,10 KA all as specified and directed Cat part No -BB20060B to BB20320B of L&T or Legrand/Indoasian.

S & F in repair SPN enclosure with two pin and earth plug and socket complete with one SP MCB, 20 Amps having breaking capacity 10 kA, including taking down old unserviceable eath plug complete all as specified.

S&FMCB Sp 6 to 32 Amp ,240 Volts,10 KA all as specified and directed Cat part No -BB10060B TO BB10320B of L&T or Legrand/Indoasian

M&L for sub main wiring with 4 runs of 16 Sqmm (FRLSH) PVC insulated unsheathed multistranded copper conductor cable and 1 run of 16 Sqmm (FRLSH) cable as earth continuity wire and including PVC conduit concealed in wall/floor including cutting chesses and making good distrubed surface to match with existing surface ,including taking down old sub main wiring all as specified and as directed. Note -1. 4 runs of 16 Sqmm sub main wire and one run of 16 sq mm for earthing and one run of PVC conduit pipe with accesories shall be measured as one unit.

Material and labour for submain wiring with 2 runs of 6 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLS cable 1100 volts grade drawn through PVC PVC consealed conduit with all accessories on surface, one run of 6Sqmm cable single core PVC insulated, unsheathed, ,1100 Volts grade multistranded copper conductor FRLS cable as earth continuity conductor and connecting including cutting the chases etc and making good the disturbed surface to match with the existing surface ,including taking down old sub main wiring all as specified and as directed. Note:-Two runs of 6 Sqmm size PVC copper cable, One run of 6 Sqmm size PVC copper cable and one run of PVC conduit shall be measured as one unit length.

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mmx6 mm thick burried directly in ground(earth pit not less than 2.25 metrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below ground level connected to galvanized iorn strip 25x4mm as earth lead by means of bolts, nuts, check nuts and washers of galvanized iron steel all shown in electric plate No 3 ( of SSR Part-i connected to earthing test pit all as specified or indicated including provn of necessery excavation and earth work in any type of soil, PCC pit ,RCC cover and frame, 20 mm bore medium grade watering pipe , water funnel, 40 mm bore GI medium grade protection pipe , common salt, charcol dust,returning, filling in of soil, removal of soil to a distance not exceding 50 mtr etc including testing on completion including taking down old earthing etc complete all as specified and as directed.

Supply & fix stop valve (angle type) cast copper alloy high pressure,screwed for 15mm dia CP fancy type (Half turn),complete including taking down old fitting etc all as specified and as directed.

Supply & fix of concealed stop cock(half turn) with sliding flange CP fancy type of size 15mm, including taking down old fitting etc complete all as specified and as directed.

Supply & fix of bib cock long body chromium plated with flange and aerator CP fancy type of size 15mm,complete including taking down old fitting etc all as specified and as directed.

S&F Gunmetal globe or gate valve 25 mm dia iron wheel head screwed both ends for PVC pipes including taking down old fitting etc all as specified and as directed.

Supply & fixing of low density polythene pipe 16mm dia (outer),450 mm long for normal water and taking down old one complete with brass union on both sides to suit 15mm GI pipe etc all as specified and as directed.

S&F on wall / ceiling (concealed) CPVC pipe 25 mm dia SDR 11& plain SDR 11 fittings , including taking down old GI pipe etc complete all as specified and as directed.

S&F Health faucet ABS body with wall hook & 1Mtr SS braided flexible tube complete. (Make-CERA Cat No- Cera F 8030102 ) including taking down old one,all as specified and directed

S&F on wall / ceiling (concealed) CPVC pipe 20mm dia SDR 11 & plain SDR 11 fittings , including taking down old GI pipe etc all as specified and as directed.

Supply and fix in repairs Ball brass valves (PTMT) of size 25 mm dia high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed all as specified and as directed.

Supply and fixing in replacement of three layered Rotational mouldede polyethylene water storage tanks (cylinderical vertical with closed top) hoisted & fixed in position of capacity 1000 liters Complete all as specified

Albert Rebello and Company

EIS IDEAL CONSTRUCTIONS INDIA P LTD