ISO/MOE5-26122/22,G smarakam Phase-3 (CSML)-General Civil Work

Amount

A.SANITARY FIXTURES

OD92592/2022-2023:Providing Fixing Testing and commissioning at site Wall mounting type water closet with P trap and its all fittings like 1 health Spray faucet 1 angle valve rag bolts solid plastic set Cover etc and concealed Flushing cistern Brass screws nuts and washers complete including cutting and making good the walls and floors Wherever required ETC complete

OD94164/2022-2023:Providing Fixing Testing and commissioning at site Handicapped water closet with P trap and its all fittings like rag bolts solid plastic set Cover etc and concealed Flushing cistern Brass screws nuts and washers wall hung wash basin with accessories flexible connections tube 32mm cp brass waste cuppling rag bolts complete including cutting and making good the walls and floors Wherever required etc complete

OD94162/2022-2023:Wash basin (Counter top) with pillar tap waste coupling and flexible connection tub

OD94163/2022-2023:Wash basin (Flat back small Size )With pillar tap waste coupling and flexible Connection Tube

17.3.1:Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

17.70.2:Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the center of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms

OD94161/2022-2023:Providing fixing C P Robe Hook with fixing screws

OD94160/2022-2023:Providing fixing C P Paper Towel Dispenser with fixing Screws

OD94175/2022-2023:Providing Fixing soap Dispenser with Fixing Screws

OD94178/2022-2023:Providing fixing Toilet Roll Holder with Fixing

SOIL WASTE & RAINWATER & PIPES

OD95466/2022-2023:(110 mm OD Type A) Soil Waste Vent & Rain Water pipes Providing Fixing Testing and commissioning at sit in Position UPVC pipe (SWR- Type A) with rubber ring or solvent welded fitting with bosses where Required

OD95465/2022-2023:( 50mm O D 6 kg/cm2 Vent pipe) Soil Waste Vent & Rain Water pipes Providing Fixing Testing and commissioning at sit in Position UPVC pipe (SWR- Type A) with rubber ring or solvent welded fitting with bosses where Required

OD95935/2022-2023:(40 mm dia OD ( 6kg/m2)(For Internal waste line) Providing Fixing Testing and commissioning at site in position u PVC pipe of 6KG/KG CM(is :4985)& SWR Type B IS 13592 including pvc fittings with bosses where required e.g tees ,bends clamps coupling and adapters and jointing with adhesive approved by fittings manufacturing including and cutting etc ( 40 mm O D Type A)

OD95937/2022-2023:( 50mm O D 6 kg/cm2 (for internal waste pipe line) B Soil Waste Vent & Rain Water pipes Providing Fixing Testing and commissioning at sit in Position UPVC pipe (SWR- Type A) with rubber ring or solvent welded fitting with bosses where Required

OD95934/2022-2023:(75 mm dia UPVC pipe Type -B (for internal waste line) Providing Fixing Testing and commissioning at site in position u PVC pipe OF 6KG/KG CM(is :4985)& SWR Type B IS 13592 including pvc fittings with bosses where required e.g tees ,bends clamps coupling and adapters and jointing with adhesive approved by fittings manufacturing including and cutting etc

OD95933/2022-2023: (110 mm dia UPVC pipe SWR Type - B (for internal waste line ) Providing Fixing Testing and commissioning at site in position u PVC pipe OF 6KG/KG CM(is :4985)& SWR Type B IS 13592 including pvc fittings with bosses where required e.g tees ,bends clamps coupling and adapters and jointing with adhesive approved by fittings manufacturing including and cutting etc

OD95942/2022-2023:Providing Fixing Testing and commissioning at site in position UPVC fabricated multi floor tap (4") with 50/75 mm dia out let

OD95941/2022-2023:(Floor tap gratings) providing Fixing Testing and commissioning at site in 150 x 150 mm square CP cast brass or stainless steel anti cockroach grating cover

OD95940/2022-2023:( Terrace rain water outlet & Landscape area) providing Fixing Testing and commissioning at site in position 160 mm dia square and circular gratings Terrace Rain water outlet(110 mm dia pipe)

OD95939/2022-2023:(Floor Clean out 75 mm dia ) providing Fixing Testing and commissioning at site in position floor clean outwith stainless steel square frame s SS

OD95938/2022-2023:(Floor Clean out 110 mm dia ) providing Fixing Testing and commissioning at site in position floor clean outwith stainless steel square frame s SS

WATER SUPPLY (INTERNAL AND EXTERNAL)

18.8.2:Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes

18.8.3:Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes

18.8.4:Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.32 mm nominal outer dia pipes

18.9.5:Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work40 mm nominal outer dia pipes

OD95951/2022-2023:(32 mm dia (ASTM Sch-80) providing Fixing Testing and commissioning at site in position UPVC PIpes as per ASTM D-1785 sch -80 of approved make for pumping line from sump Tank to over head tank

18.18.2:Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:20 mm nominal bore

18.18.3:Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal bore

OD95960/2022-2023:(32 mm11/4"Brass ball valve) providing Fixing ball valves (Brass) of approved quality High or low pressure with plastics flots

OD95962/2022-2023:( 40 mm 11/2"Brass ball valve) providing Fixing ball valves (Brass) of approved quality High or low pressure with plastics flots

OD95963/2022-2023:(40 mm 11/2" Brass Non Return Valve)Providing and fixing testing and commissioning at site in position as detailed and drawing s Brass Non Return Valves

OD95968/2022-2023: GI Slotted rail (Electro Galvanized ( In Shafts , Ceiling and Dry interior areas )

OD95967/2022-2023:GI Slotted rail (hot dip galvanized(fully Exposed to weather and wet areas)

OD95969/2022-2023:3/4 Air Release Valves ( Brass) Providing fixing testing and commission at site in position automatic Air release valve

OD95970/2022-2023:(Y Strainer (Brass) Providing fixing testing and commission at site in position brass Y Strainer

EXTERNAL SEWERAGE

2.10.1.1:Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: All kinds of soilPipes, cables etc, not exceeding 80 mm dia

OD95976/2022-2023:(75 mm dia UPVC pipe) Providing and laying of pipes and conveying to position cleaning laying and joining to true lines and gradients PVC pipe of IS 4985 (6kg/cm2

OD95975/2022-2023:(110 mm dia UPVC pipe) Providing and laying of pipes and conveying to position cleaning laying and joining to true lines and gradients PVC pipe of IS 4985 (6kg/cm2

19.7.1.2:Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design: Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With Sewer bricks conforming to IS : 4885

19.4.2.2:150x100 mm size P typeWith sewer bricks conforming to IS:4885

PUMP AND ACCESSORIES

OD95979/2022-2023: Pump and Accessories DWS Submersible pump

Construction of copound wall ,Disposal of waste soil with plastic and solid waste ,re filling yard with gravelly earth

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

50.2.25.1:Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

OD102073/2022-2023:Dry rubble masonry with hard stone in foundation and plinth including proper packing

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)

13.45.1:Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Construction of access to Smartakam from Main road

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

OD102103/2022-2023:Dry rubble masonry with hard stone in foundation and plinth including proper packing

16.78.1:Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30

16.79:Providing , laying spreading and compacting graded stone aggregate ( size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub - base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer - in- Charge.

50.2.25.1:Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

10.26.2:Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.E.R.W. tubes

OD102202/2022-2023:Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

11.16.2:Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) :Medium shade pigment using 50% white cement and 50% ordinary cement

MUJEEB RAHIMAN

Bidder Name

FAIZAL A .U.

MUJEEB RAHIMAN