SPECIAL REPAIRS TO ORS MD ACCN BLDG NO P-10 (01 TO 09) OF MH DHRANGADHRA AT MILITARY STATION DHRANGADHRA

Amount

Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and n exc 2 sqm each complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in CM including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L for walling of random rubble, uncoursed well bounded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed.

M & L for walling (Except stone) of random rubble, uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc 20mm for sand stone and dressing to face stones and dressing of face beds and joints as specified ,of random rubble walling ,uncoursed or brought upto courses completed as specified and directed .

Dismantling floor ,hearth or wall tiling incl cement mortar bedding (but not backing) complete all as specified and as directed .

Dismantling wrought iron or mild steel work of any description not otherwise proviceded for

Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete all as specified and directed.

Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete all as specified and directed.

Providing cement concrete 25 mm thick type B-1 (1:2:4) using 20 mm graded agg as in sub base to flooring .

M&L for Pre polished machine cut kota stone slab in flooring18-20 mm thick and including 20mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and finshed polishing in complete all as specified.

M&L for Pre polished machine cut kota stone slab, 18-20 mm thick in riser and tread single piece on steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 including grinding and finshed polishing complete all as specified and directed.

M & L, non skid White ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 Sqm, over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed

M & L, non skid White ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, in floors over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed

M & L, glazed coloured ceramic tiles in vertical surface as in skirting & dado, 7 to 8 mm thick area exc 0.05 Sqm but n.exc 0.18 Sqm over and including 10 mm thick rendering in CM1:4 set & jointed in neat cement slurry & pointed in coloured cement to match complete all as specified and directed.

M&L for 10 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:4 complete all as specified and directed.

M&L for 10 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:6 and finishing even and smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick rendering in CM 1:3 and finishing even and smooth without using extra cement on ceiling, soffits, chajja projection etc complete all as specified and directed.

Preparation of new plastered surfaces and applying two coat of oil bound distemper over and including a layer of wall care putty to achive a smooth finish surface (average thickness 1 mm) complete all as specified and directed.

Preparation of old plastered surfaces and applying two coat of oil bound distemper over and including a layer of wall care putty (average thickness 1 mm) complete all as specified and directed.

Preparing of plastered or unplastered old decorated surfaces of walls by complete removal of existing treatment, moulds, moss and efflorescent salt and treating oil and greasy spots and applying three coat of white wash on walls including cornices etc complete all as specified and directed

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying one coats of cement base paint complete all as specified and directed.

S&F in 18/19 mm thick prelaminated particle board interior grade ,prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screws to timber frame work in cup boards ,rebated or flat ege complete all as specified and directed.

S&F 1.25 mm thick Pressed steel frame size 105 x 60 for doors with one or more rebates including necessary S&F suitable MS hinges ,lugs, lock strike plate, hold fast complete all as specified and directed.

S&F 1.25 mm thick Pressed steel frame size 125 x 60 for doors with one or more rebates including necessary S&F suitable MS hinges ,lugs, lock strike plate, hold fast complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using (12.5 mm graded agggregate stone ) for back filling of Pressed steel frame etc complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast ,filling,chamfared etc complete all as specified and directed.

S&F 35 mm thick Flush shutter ,solid core construction ,with block board core and plywood face panel comercial type on boath sides complete all as specified and as directed .

S&F Aluminium eyes pice glass for main Gate and shutter 75 mm size

S&F 35mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc(without sash bar), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass , etc size of members of shutters as specified in SSR part I ,section 8 clause 8.24(a) fitted to chowkats complete all as specified and directed.

S&F in repair Stainless steel Door hinges medium weight, cold rolled 100 mm size all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section length of bolt in 200 mm size complete all as specified and directed.

S&F 300 mm long Aluminium alloy ,anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet ,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed .

S&F MS 300 mm ordinery rat rail rod pattern spring including roller and roller plate complete all as specified and as directed .

S&F 150mm long floor door stopper of aluminum alloy body and tongue , anodized with hard drawn steel spring complete all as specified and directed

M&L, preparing of new wooden surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F standard aluminium section powder coated any colour as approved for window and ventilator three track sliding shutter /fixed type without sash bar ,aluminium section weight 0.55 kg /m including necessary joining cleats ,glazing clips ,rubber packing ,anodised aluminium snap beading , screws etc complete all as specified and as directed.

Supply and Fixing sheet glass 4.8 mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and directed.

Supply and Fixing Figured glass pin head type (Figured glass) sheet glass 4mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed.

M&L, preparing of new steel surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fit-ted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in opening as per specification complete all as specified and directed

S&F in aluminium, anodised barrel tower bolts 150mm long of extruded section and fixed complete all as specified and directed.

S&F, aluminium handles 150mm size, cast type, anodised complete all as specified and directed.

M&L for RCC (Nominal mix) Type B 1,1:2:4 (20 mm graded aggregate) as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like including demolition of existing RCC work in any position complete all as specified and as directed.

Use and waste of form work to soffit of suspanded slab such as roof slab ,floor slab landing and similar work n exc 200mm thick (horizontally or sloping complete all as specified and as directed.

M&L for TMT bar 6 to 8 mm dia including cutting bending and binding with MS wire anealed dia not less than 0.9 mm conplete all as specified and as directed.

Dismantling Mangolore pattern roofing tiles with ceiling tiles or state roofing

M & L, Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in single length complete all as specified and directed.

M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

M&L for , false ceiling consisting of wall angles ,main T ,cross T all of size 25 mm X25mmX1.4mm thick power coated GI grid frame work jointed angle as directed and mild steel hooks not less than 4 mm dia with arrangement for adjusting heights of ceiling with and incl provision of 4 mm thick E boards sheet in panels of size 600mmX600mm with necessary off cuts and fixing arrangements for ceiling ,tube light fitting incl dismantling of existing false ceiling complete all as specified and as directed.

Dismantling timber scantling 40 sqcm and over in section ,an any position (framed)

Ditto as per item no 58 above but fillet rais ,post rafter purlin etc under 40 sqcm in section (unframed)

S&F rolled mild steel section as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed.

S&F for mild steel for roof truses (framed) ,trussed purlins crane gantires ,rails and fasternings and heavy bracket framming (beam tee angle channel or flat sections )including distance pieces , clats etc and confir to Fe-410-w (GdeE-250) quality A including one shop coat of zinc chrome primer complete all as specified and directed.

All as per item No 61 above but except material complete all as specified and as directed.

S&F MS angle iron framed work as in doors or gate of angle or other section conforming to Fe 290 (Gde E-165) with gusset plates rails braces etc complete including hangin galso fastenin gand fxing complete as specified and directed .

S&F in repairs bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe.

S&F in repairs Stop valves /Angle cock/ concealed stop valves cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe.

S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed.

S&F in repair vitreous china squatting pan, orrisa pattern, size 580mm x 440mm white, with integral foot rests (excluding flushing cistern & flush pipe) including making good to disturbed floor with PCC complete all as specified and directed.

S&F in repairs PVC low level 10 lit capacity valveless syphonic action type flushing cistern including 32mm dia PVC flush pipe fixed in repairs complete all as specified and directed

S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete.

Dismantling of water tank & n exc 500 ltr capacity in litres and removing to store

Supply & Fix 500 litre capacity three layered rotational moulded polythylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed.

Refixing old serviceable 15 mm GI tubing and connection in new or old position (concealed in Wall, ceiling & floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed

S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors (concealed in Wall, ceiling floor etc.) incl cutting chases where required complete complete all as specified and directed

Refixing old serviceable 20 mm GI tubing and connection in new or old position (concealed in Wall, ceiling floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed

S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors incl cutting chases where required complete complete all as specified and directed

S&F in repair 20mm Gate valves with iron wheel head screwed both ends for iron pipe and fixed.

S&F in repair white glazed earthen ware vitreous china wash hand basin of size 550x400 mm with and including CI brackets ,32mm bore bras CP waste coupling lintel /out let PVC flexible pipe 600mm size for 15mm with brass nut and washers etc complete.

Supply & Fix in repair 15 mm dia pillar tap (long nose)cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, with or without lettered "Hot or Cold" with long swan neck swivel type screwed for iron pipe and fixed complete all as specified and directed.

S & F Soap dish chromium plated approximate size 160x 160x90mm complete all as specified and directed.

S&F 5.5mm thick glass shelf of size 600mm long fancy type fixed and including Chromium plated grils, screws and wooden /plastic cleats complete all as specified and directed

S&F 5.5mm thick glass corner shelf assembly fancy type size 250mmx250mmfixed with and including chromium plates brass screws and wooden /plastic cleats complete all as specified and directed

S & F Aluminium Hat pegs of 6 pegs,solid body 125mm to 175 mm complete.

S & F Brass chromium plated shower rose 125mm size incl shower arm complete all as specified and directed.

S & F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supply & Fix in repairs, 75mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with PVC holding clamps complete all as specified and directed.

S&F in repairs, 110mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repairs, 125/110mm bore PVC (SWR) 'P’ trap complete all as specified and directed.

S&F in repairs, 75mm bore dia PVC floor trap (SWR) plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed.

S&F in repairs, 110mm bore PVC(SWR) bends any radius, complete all as specified and directed.

S &F PVC (SWR) 75 mm dia vent cowl

M&L for 20 mm thick Granite (of any type of coloured) tiles maxhine cut in skirting/dado laid over cement screed and jointed with grey cement slurry ,and pointed with grey cement slurry ,and pointed with white cement with adimixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick screed bed in CM 1:6 incl moulding, chamfering of edges complete.

S&F Sinks made of stainless steel 1 mm thick kitchen with plugs washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x420mm bowl size 410mm x 330mm x160mm ,including cupling , west pipe etc complete all as specified and directed.

S&F kitchen plate rack of stainless steel of size 1100mm x 900mm x 230mm made out of 1mm thick steel sheet complete all as specified and directed.

S&F PVC cabinet mirror size 350mm x 450mm fixed with steel screw with rowl plug complete all as specified and directed.

M&L for 50 mm thick PCC 1:3:6 type C-2 (using 40 mm graded Stone aggregate) as in plinth protection finisheed even and smooth without using extra cement complete.

Demolition of precast concrete articles and pre-cast cement concrete block walling, ashlar fencings, dressed stone work including all quoins, arches, pillars etc. built in cement mortar complete all as specified and directed.

M&L, precast cement concrete Block Masonary with solid blocks type C1, 1:3:6 (20mm graded stone aggregate) exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed .

ditto item no 98 above but in except block

M&L, providing cement concrete1:2:4 type B1 as in , coping ,benching, bressumers, steps, incl necessary form work and demolition of existing cement work complete all as specified and as directed.

Demolition of plain cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for 75 thick PCC Type C-2 1:3:6(40mm graded aggregarte) for floor finishing cement concrete surface even and smooth without using extra cement .

S&F Harrison rails, mild steel chromium plated with fixing brackets ,stops ,rolleres etc complete all as specified and as directed.

S&F M.S Framed work such as grills gratings etc with ends of bars sholdered and/or riveted into spikes ,framed guard bars /railings all as directed .

Taking down carefully copper/ aluminium point wiring (Light, fan, socket or power etc) complete including fittings such as switches, sockets, bell pushes, ceilling roses, pendants/batten holder, call bell, regulators etc all as specified and direted by Engr-in-Charge.

Material and labour for point wiring for one light/ fan/ bell point controlled by one switch one way in & including PVC conduit concealed in brick or stone wall using FRLS PVC unsheathed multistrand copper conductor wire 1.5 sqmm single core for one light/ fan point controlled by one switch including modular white cover plate with frame of suitable modules over modular metal flush box concealed type for earth continuity insulated PVC unsheathed (green colour) 1.5 sqmm copper earth wire connected to common earth dolly using complete all as specified and as directed by Engr-in-charge. Note: (a) wiring shall be done by using proper colour coding.

All as per Serial item No.106 here-in-before but for 6 Amp socket outlet on independent board complete all as specifed.

All as per Serial item No.106 here-in-before but for 6 Amp socket outlet on same board complete all as specifed.

All as per Serial item No. 106 here-in-before but for 6/16 Amp independent socket outlet using 2.5 sqmm single core wire (for phase, nuetral and earth) complete all as specifed directed.

Supply and fixing modular switch piano, flush type 6 Amps one way 230 volts complete all as specified.

Supply and fixing modular bell push 6 Amps, 1 module complete all as specified and directed.

Supply and fixing in repairs, bell A.C. 230 Volts, single pole, Ding doll, complete all as specified and directed.

Supply and fixing modular socket outlet 3 pin 6 & 16 Amps flush type 230 Volts complete all as specified.

Supply and fixing modular switch one way 16 Amps flush type 230 volts complete all as specified.

Supply and fixing modular socket 3 pin 6 Amps flush type 230 Volts complete all as specified.

Supply and fixing ceiling rose 3 terminal size 50 X65 mm surface type 230 volts complete all as specified.

Supply and fixing modular fan step type regulator suitable for 1200mm/1400mm sweep ceiling fan 2 module complete all as specified and directed.

Labour only for cutting openings, through brick walls for fixing of exhaust fan, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core etc. and rubbish not exc. 50 m forming jambs, etc to openings for 230 mm exhaust fan inccluding cutting in wall to cement mortar 1:6, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete.

Supply and fixing of exhaust fan 230 mm sweep, 1400 rpm, MS body heavy duty, AC single phase , 230 Volts with blades and frame and louvers including connection with 0.5 Sqmm multistranded copper conductor flexible wire from ceiling rose, necessary fixing arrangement i.e. anchor nut, bolt, washer, grouting and making good to disturbed surface complete all as specified and as directed.

Supply and fixing ceiling fans 1200 mm sweep energy efficient five star rated 230 volts with brushless direct current motor (BLDC) with blades down rods, electronic regulator control type including down rods and connecting up with 3 runs of suitable size single core PVC insulated but unsheathed , FRLS cable with multistranded copper conductors from ceiling rose to fan complete all as specified and as directed.

Supply and fix electric water heater, storage type steel body with stainless steel inner and heating element upto 2 KW capacity 25 litre, BEE 5 star rated 230 volts, single phase, 50 Hz AC , energy saving high density PUF insulation complete with all accessories such as safety valve, thermostate, NRV, inlet and outlet (cold & hot) PVC pipes upto 450 mm long, with 15 A plug top etc. complete all as specified and directed.

Supply and fixing LED compact fittings/batten for single LED tube of 1X20 W, 220 V, AC decorative box type 4 ft with integral LED driver including 20W, T8 tube rod complete all as directed by Engr-in-Charge.

Supply and fixng in replacement wall mounted fancy bracket designed decorative glass type LED light with holder B22 new generation, aesthetically designed,ultra modern liminaire with warm white 9/10Watts LED bumb complete all as specified and directed by Engr-in-Charge.

Supply and fixing Holder insulated body with back plate for battern fitting suitable for LED lamp complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED adore lamp 9W, B22 base 6500K CDL type complete all as directed by Engr-in-Charge. Make: Havells or equivalent.

Taking down carefully old unsv submain wiring of any type/any size with PVC conduit or casing caping complete all as specified and directed.

Material & Labour for sub main wiring complete with FRLS PVC insulated unsheathed stranded copper conductor wire 4.0 Sqmm 02 runs (for Phase & Neutal) along with earth wire FRLS PVC insulated unsheathed stranded copper conductor wire of size 4.0 Sqmm wire drawn through in & including PVC casing caping or conduit as per site requirement complete all as directed by Engr-in-Charge.

Taking down carefully old unserviceable main switches/Distribution board type including fuses MCB etc. after removing all connection, wires and making good the disturb surface complete all as directed by Engr-in-Charge.

Supply and fixing sheet metal enclosure double door for DB's SPN 8 way 240 V having 200 A rated bus bar complete all as specified and directed by Engr-in-Charge.

Supply and fixing MCB SPN 32A, 240 V -10 KA all as specified and as directed by Engineer-in-Charge.

Supply and fixing MCB SPN 6-32A, 240 V -10 KA all as specified and as directed by Engineer-in-Charge.

Supply and fixing 30W new generation energy saving and environment friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP opening separate driver compartment with IP66 protection and impact resistance of IK07 for bldg security light with GI pipe bracket of suitable size for fitting complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Wall mounting fan , oscillating type, single phase with speed regulator step type 300 mm sweep complete all as specifed and as directed.

Supply installation testing & commissioning of polycarbonae single phase meter box for outdoor type IP-66 with arrangement of fixing in meter box energy meter with front transparent PVC sheet for punching of recharge token complete all as specified and directed.

Supply and fixing Distribution Board VTPN, 4 way , 415 colts, factory made powder coated double door with neutral and earth link, including 3 pole MCCB 100 Amps rating 16KA braking capacity for incoming supply and MCB SP 12 Nos for out going supply complete all as specifed and directed.

Material and labour for pipe Chemical earthing with GI pipe electrode 2.25m long having outer pipe nominal dia 80mm & inner dia 50mm dily filled with highly condictive and corrosive compound of required quantity having chemical Betonite 40%, Copper sulphate 20%, Gypsum 5%, Grafite 10%, Alum 5%, Zinc sulphate 10%, Aluminium sulphate 10% Buried in ground digging a bore of 150mm dia surrounded by soil friendly backfill compound non solube in water including connection with and including GI strip 32 x 6mm upto 7.5m PCC pit with RCC cover etc complete. Note : Rate quoted by tenderers shall be deemed to include for following provisions:- [i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 M. [ii]. PCC 1:3:6 type C1 (using 20mm graded stone aggregate) in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50 x 50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles. [iii]. Main earthing lead from earth electrode to test point upto 7.5 meter. [iv] GI pipe of size 20 mm bore light grade 2.0 m for watering. [v] GI protection pipe of size 40 mm bore light grade 7.5 m and testing on complete all as specified and directed.

Shivaang Enterprise (BID ID -3485381)

EVEREST BUILDERS (BID ID -3484184)

SAPPERS CONSTRUCTION (BID ID -3486920)

Nitesh Enterprise (BID ID -3485808)

Magnus Enterprise (BID ID -3486842)

JAMNAGAR ELECTRIC AND MACHINERY CO (BID ID -3483524)