CHHATERA PROVIDING CANAL BASED W/S SCHEME FOR 2 NO. VILLAGES CHHATERA AND MATAND CONSTRUCTING WATER WORKS AT VILLAGE MATAND, PROVIDING B/STN. FUNCTIONAL HOUSEHOLD TAP CONNECTIONS (FHTC) AND LAYING OF BALANCE PIPE LINES IN VILLAGE CHHATERA

Amount

WATER TREATMENT PLANT (WTP) Design, construction, testing & commissioning of 0.5 MLD capacity Water treatment plant at Water Works Chhatera including inlet channel, Alum dozing, Flash mixing, Clarifloculator, filter box, over head Reservoir for back wash, waste water tank including all civil work, pumping machineries and electric cabling, control panels, entire piping network of suitable size DI pipe from S & S Tank to Pump chamber, raw water pump to inlet box of WTP, WTP to CWT & Suction Well for CW including DI specials, suitable size Sluice valves, Hodies, manhole covers, air scour equipment, chemical house including chlorination equipment and arrangement of flow measurement and sand bed complete in all respects as per NIT (Sluice valves of make IVC/VAG) . DI pipe for the work will be supplied by the PHE Deptt. free of cost at Reserve stock Gohana.

RAW WATER PUMPING MACHINERY-SSupply & Eraction of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No II complete in all respect with priming arrangement with complete base frame- (2.1.1)- WATER WORKS- 500 LPM X 12.00 M. Head

CLEAR WATER PUMPING MACHINERY-Supply & Eraction of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No II complete in all respect with priming arrangement with complete base frame- (3.1.1)- WATER WORKS- 400 LPM X 40 M. Head

(3.1.2 ) -500 LPM X 45 M. Head

( 3.2.1)- B/STN CHHATERA- 700 LPM X 45 M. Head

PANEL BOARDS FOR MOTORS (4.1)- Supply, erection, testing & commissioning of wall mounted electrical L.T. Panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900 mm and 400 mm deep having follwing items For 2 no Pumping Sets of 500 LPM x 12 m Head a) Main switch 63. amp. 1 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 500LPM x 12 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 2.1.1

(4.2)-For 2 no Pumping Sets of400 LPM x 40 m Head a) Main switch 63 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 400 LPM x 40 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 3.1.1

(4.3)- For 2 no Pumping Sets of 500 LPM x 45 m Head a) Main switch 63 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 500 LPM x 45 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 3.1.2

(4.4)-- For 2 no Pumping Sets of 700 LPM x 45 m Heada) Main switch 63 amp. 1 No. (L&T Siemens, ABB)b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T)c) Digital Multi function meter = 1 No.d) SPP = 1 No. of approved makee) Motor starter, Star delta for 700 LPM x 45 m Head = 2 Nos (L&T Siemens, ABB)f) VSS 1 No. & ASS 2 Nos. of approved make.g)Capacitor KVAR as per site requirement = 1 No.h) Indicating Lamp = One Seti) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 3.2.1

Supply, erection, testing & commissioning of IS marked copper wire for various motors with underground system in PVC and flexible pipes copper wire 3 core complete in all respevts with accessories like thimble etc.- 10mm2 3core

25mm2 3core

Sluice Valves / NRV & specials for Pumping Machinery- Supplying, fixing, jointing, testing & commissioning of DI sluice valves resilient sheet P.N. 1.6 including cost of jointing material complete in all respect. (IVC / VAG make, Kirloskar)- 100mm i/d

Supplying,fixing, testing & commissioning of DI swing check type reflux valve (non returned valve) PN 1.6 including cost of jointing material complete in all respect.( IVC / VAG , Kirloskar make) - 100mm i/d

Supply, fixing & testing of Mechanical Joints PN 1.6 alongwith ruber gaskit & galvanized nuts / bolts complete in all respect.- 100mm i/d

Supply, erection, fixing & testing of DI Double flanged pipe complete with all jointing materials- 100mm i/d

Sluice Valves/ Specials For Rising Mains - Supplying, fixing, jointing, testing & commissioning of DI sluice valves resilient sheet P.N. 1.6 as per DNIT specification on the pumping machinery & head works including cost of jointing material (IVC / VAG make) 7.1.1 -150mm i/d

Supply & Fixing of Mechanical Joints PN 1.6 alongwith ruber gaskit & galvanized nuts / bolts complete in all respect. 7.2.1- 150mm i/d

Providing & fixing of D.I. Kinetic Air Valve soft seated as confirming to I.S.I. complete in all respect.- 80mm

Supply erection testing and commissioning of exhaust fans each having a capacity of 45 cubic meters per minutes, complete in all respect.

Supply erection & testing of Ceiling fan of size 48" i/d (1200 mm) of reputed ISI make complete in all respect.

Providing and fixing of insulated Rubber matting suitable for HKV installation 1 meter x 2 meter x 12 mm as per specification.

Supplying and fixing of Gantry with chain pulley block of following capacity with traveling trolley of appropriate lifting capacity for handling of pumping sets capable of moving along the girders to be provided in the pump house complete in all respects as per specifications approved by Engineer-in-Charge. - 2Ton Capacity at W/W

Providing & fixing suitable size floating along with swivel bend as per required specifications approved by Engineer-in-Charge

Supply erection testing of reputed make LED light 100 wats with fittings and accessories complete in all repects. (4 at ww + 2 at Boosting station)

Supply erection testing and commissioning of Flow Meter (KRONE Make) with digital display of 150 mm i/d complete in all respect.

Design, Supply & Erection of copper wound outdoor type Transformers of required KVA as mentioned below on load tap changer or suitable capacity on higher side of standard make outdoor type, VCB Panel, G.O. Switch, H.T. Metering Panels, APFC Panels along with for each Transformer, 11KV Substation, entire cable network from G.O. Switch to H.T. Metering equipment and from H.T. Metering to Transformer Main to L.T. Panel, Earthing, safety equipment and any other contingent thereto complete in all respect as per DNIT and getting it passed from Chief Electrical Officer including operation & Maintenance of 5 Years.- At W/W = 63 KVA

Design, Supply & Erection of 1 No. DG Sets of required KVA as mentioned below suitable capacity on higher side capacity with Acoustic Canopy, AMF Panel and Copper Earthing of suitable rate with change over switch & synchronizing panel complete as per DNIT including operation & Maintenance of 5 Years.- AT W/W = 82.5 KVA

Operation & maintenance for the complete scope of work mentioned in the DNIT (Disinfection material will be supplied by the PHED) as per schedule-IV during Defect liability period of 12 months after trial run period of 3 months & 5 years thereafter. (Will be charged to A/mtc estimate)."-(i)-Defect liability period (Only items in which fault will be found then it will be replaced by the contractor at his own cost) (Operation Only)

(ii) Operation & maintenance during 1st year

(iii) Operation and maintenance during 2nd year

(iii) Operation and maintenance during 3rd year

(v) Operation and maintenance during 4th year

(v) Operation and maintenance during 5th year

Bidder Name

Amount

Rajesh Kumar

RAM PHAL SINGH CONT

Sunil Kumar

RAM PHAL SINGH CONT

Sunil Kumar

RAM PHAL SINGH CONT

Sunil Kumar