Loading
Loading…
Loading…
Tender Value
₹1.7 Cr
EMD Value
₹2.3 L
Closing Date
15 Jan 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
45 days
Expenditure
Capital (Works)
GSPGT
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' which ever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Appendix-J, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
Statement showing Annual Contractual Turnover Data (as per Appendix - J of Tender Document) for the Previous 3/4 Years (Contractual Payment only) supported by Audited Balance Sheet duly certified by the Chartered Accountant shall be enclosed alongwith the bid. Non-submission of the same by the bidder shall result in summarily rejection of his/their bid
The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: 1. Three similar works each costing not less than the amount equal to 30% of advertised value, or 2. Two similar works each costing not less than the amount equal to 40% of advertised value or 3.One similar work each costing not less than the amount equal to 60% of advertised value Note: Separate completed works of minimum required values for each component can also be considered for fulfillment of technical eligibility criteria for different components. *Similar Single work is defined as "Works involving wiring/lighting with 240V, 1 Phase or 415V, 3 phase system with control gear and protection arrangements in residential buildings or service buildings or railway stations/yards or colony/highway lighting".
The tenderer shall submit along with the tender document, documents in support of his/their claim to fulfill the eligibility criteria as mentioned in the tender document. Each page of the copy of documents/certificates in support of credentials, submitted by the tenderer, shall be self- attested/digitally signed by the tenderer or authorized representative of the tendering firm. Self-attestation shall include signature, stamp and date (on each page). Only those documents which are declared explicitly by the tenderer as "documents supporting the claim of qualifying the laid down eligibility criteria" will be considered for evaluating his/their tender. Note- The tenderer shall attach a summary of documents submitted for satisfying the eligibility criteria either duly self attested or digitally signed
23 conditions · 4 needing a document upload
The Supply of Goods and Services would be subject to GST Act and Rules applicable from time to time.
I/We have read the various conditions to tender in the attached tender document and agree to abide by the said conditions.
I/We agree to keep this tender open for acceptance for a period of 45 days from the date of closing of this tender and in default thereof I/We will be liable for forfeiture of my/our Bid Security. I/We offer to do the work for Railway, at the rates quoted in the attached Schedule and hereby bind myself/ourselves to complete the works in all respects.
I/We also hereby agree to abide by the updated Regulations of Tenders and Contracts and General Conditions of Contract issued by the Engineering Department of Indian Railways along with correction slips issued from time to time and to carryout the work according to the Special Conditions of Contract and specifications of materials and works as laid down by Railway in the Annexed Special Conditions / Specifications, Schedule of Work for the present contract.
All rates quoted in the tenders shall be deemed to be inclusive of CGST, SGST, IGST etc., payable by the contractor to the Government or any public body and no additional amount/rate or claim will be entertained on this account by the Railways. Also no claim whatsoever will be accepted by Railways on account of revision of tax rates, new taxes of statutory nature by State/Central Govt.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall go through the entire tender documents thoroughly and strictly adhere the instructions and directions given at different pages.
Deployment of Qualified Engineers at Work Sites by the Contractor - The Contractor shall employ 1 No. of qualified Graduate Engineer for works Rs. 200 Lakh or more and 1 No. of Diploma Engineer for works costing more than Rs. 25 Lakh, but less than Rs 200 Lakh
Revamping of Electrical Arrangements for major Power circuits and Pumping Installations at various locations in PGT Division - Electrical arrangements
J-E-32-2025-26-W~SR
J-E-32-2025-26-W
Open
Works - General
9 Months
Palakkad, Kerala
₹0
₹2.3 L
15 Jan 2026
22 Dec 2025
1 Jan 2026
73 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,65,24,594 | ||
| — | 56.00 | — | — | ||
| "Erection of Open well Submersible pump capacity 1.5HP, 230V, 50Hz, 1 Phase AC Supply with delivery of 25mm to pump clear water at a head of 22m-36m with discharge 3.05 to 0.7 LPS. The said scope of work includes supply, fixing of Suitable size of MS Clamp (2 Nos.), NRV (1No.), Flange with washer (2Nos.), Nipple (1No.), etc.., Note: - 1.5HP pump will be supplied by Railway from the Office of SSE/Electrical In-Charge of the work." | — | — | — | 1,68,000 | |
| — | 12.00 | — | — | ||
| "Erection of Open well Submersible pump capacity 2.0HP, 230V, 50Hz, 1 Phase AC Supply with delivery of 25mm to pump clear water at a head of 28m-42m with discharge 3.25 to 0.35 LPS. The said scope of work includes supply, fixing of Suitable size of MS Clamp (2 Nos.), NRV (1No.), Flange with washer (2Nos.), Nipple (1No.), etc.., Note: - 2.0HP pump will be supplied by Railway from the Office of SSE/Electrical In-Charge of the work." | — | — | — | 42,000 | |
| — | 77.00 | — | — | ||
| Supply and fixing of 32mm to 50mm dia Brass type Non Return Valve as directed by site enginer incharge. | — | — | — | 3,24,940 | |
| — | 103.00 | — | — | ||
| Supply and fixing of Single Phase Submersible Pump Controllers with Ammeter and Voltmeter for 1.5HP to 2HP pumps similar to L&T Model no. MF -G1 [SS97731OOVG/SS97732OOCG] or similar makes | — | — | — | 5,60,835 | |
| — | 660.00 | — | — | ||
| Supply and fixing of heavy 32mm to 50mm PVC Hose pipe with associate fixing arrangements for delivery of water. | — | — | — | 1,60,380 | |
| — | 49.00 | — | — | ||
| "Supply at site, erection, testing and commissioning of concealed/wall mounting metallic, 1-phase, double door, MCB Distribution Board 8Way, powder coated similar to L&T Model No. DBSPN008DDS with the supply and fixing of the following, In coming MCB Type 25A Changeover switches similar to L&T Model No. AUC00202500 - 1 No. Out Goings DP MCB of 16A - 2 Nos. SP MCB of 10A - 2 Nos. including internal wiring connection, with earthing / neutral link, din channel complete with all accessories. Copper lugs shall be used for termination of wire in MCB'S and Aluminium sockets for cables termination and plastering and finishing to original level as directed by Engineer In charge. MCB makes shall be of L&T, Legrand or similar makes" | — | — | — | 3,75,830 | |
| — | 895.00 | — | — | ||
| Supply and laying of 3 core 4 Sq.mm flat submersible type cable of high conductivity electrolytic grade copper conductor as per IS 694/90 through already erected PVC conduit pipe | — | — | — | 1,61,100 | |
| — | 396.00 | — | — | ||
| Excavation of cable trench in all kinds of soil up to a depth of 1.0 Mtr. & Width of 0.3 Mtr duly clearing the roots of trees etc. and refilling with the excavated soil up to normal level. Depth and Width can be varied based on site Condition as directed by site engineers in charge. Concerned Measurement will be taken in Cubic meters. | — | — | — | 2,45,520 | |
| — | 750.00 | — | — | ||
| Supply and laying of ISI marked UPVC pipe (Schedule-40) of size 32mm dia for Open wiring including, tees, bends, junction boxes etc.,Wall thickness 1.4mm +/- 0.2m (fixing of pipe with GI clamps) | — | — | — | 1,81,500 | |
| — | 5.00 | — | — | ||
| "Fabrication, supply and fixing of 1.5meter MS Channels of size 100 x 50 x 4.0 mm including provision of suitable fondation as directed by site engineer incharge. Note:- 1) Painting has to be done by the contractor with two coats of primer zinc chromate paint and aluminium paints." | — | — | — | 9,230 | |
| — | 8.00 | — | — | ||
| "Supply at site and fixing of Transparent/Opaque type Poly carbonate box Similar to model No. KG 9003/KG 9003 IN fitted with the followings 1) 63A 4 Way connector - 1Nos." | — | — | — | 32,248 | |
| — | 9.00 | — | — | ||
| Supply at site and fixing of Transparent/Opaque type Poly carbonate box Similar to model No. Mi 0300/0301 with suitable fixing arrangements as directed by site engineer incharge. | — | — | — | 84,285 | |
| — | 585.00 | — | — | ||
| Supply, laying and provision of 8 SWG bare Copper wire as earth continuity including termination | — | — | — | 49,140 | |
| — | 157.00 | — | — | ||
| "Supply of Concealed type Earthing. This consisting of supply at site, erection, testing and commissioning of G.I. Earth Electrode 50mm dia, 3000mm long, 'C' class (heavy duty/ISI marked supply and and fixing of earth inspection chamber, lid, as per Construction Drg. No.EL/P/TYPE-1022 with charcol & salt / Bentonite Compound Filling, which includes the cutting and removing of granite / marble / kadappa stone paved platform and cement concreted areas etc., excavation / augering of earth pit by suitable boring equipments. The earth pot shall be provided in level with flooring. The above includes reconstruction of the area of granite / marble / kadappa stone / cement concrete etc.., to bring back to the original condition duly providing granite / marble / kadappa stone / cement concrete etc.., duly making interconnection between electrical equipment and earth electrode using 6SWG GI earth wire. The earth pot shall be painted black and earth value to be recorded" | — | — | — | 11,24,120 | |
| — | 36.00 | — | — | ||
| Casting of concrete for plinth (1:2:3) | — | — | — | 4,66,740 | |
| — | 41.00 | — | — | ||
| "Supply, erection, testing and commissioning of Octagonal poles of 4 m high with decorative Single arm, Top dia 70mm, Bottom dia 130mm, sheet thickness 3mm, with suitable casting of cement concrete foundation & muffing Including Supply,fixing of 40W to 50W LED Street light and wiring to the LED Fittings. Note :-Drawing to be submitted for approval before fabrication of Octagonal poles." | — | — | — | 14,37,419 | |
| — | 52.00 | — | — | ||
| "Supply, erection, testing and commissioning of Octagonal poles of 4 m high (without bracket), Top dia 70mm, Bottom dia 130mm, sheet thickness 3mm. Note :- 1) Drawing to be submitted for approval before fabrication of 4m Octagonal poles." | — | — | — | 11,44,000 | |
| — | 52.00 | — | — | ||
| "Supply and Fixing of C Channel of Approx. size 70x40x5x7 mm with 800mm length (Two Way Cross Arm Complete) with Suitable Fixing Arrangements. Note :- Said C channel (Two way Coss Arm) has be fixed on the Octagonal poles as directed by site Engineer in charge. " | — | — | — | 52,000 | |
| — | 87.00 | — | — | ||
| "supply & Fixing of 80W flood type LED type luminaire on the already erected Dwarf rail poles / 2 way cross arms of Octogonal poles. Preferable Makes :- Surya, philips, CG, Bajaj, GE, Wipro, HPL or any other reputed makes." | — | — | — | 5,91,513 | |
| — | 100.00 | — | — | ||
| "Supply, Fixing and Commisssioning of Daily/Weekly Programmable Electronic 110/240V AC Crono Timer switch Similat to (L&T) Model No.67DDT0 or any other reputed makes as directed by site engineer incharge. Note:- 1) said timer has to be fixed in the suitable locaton such as cable ternination box or starter panel etc.., as directed by site engineer incharge. 2) Necessary Fixing arrangements (Din Rail etc..,), wiring arrangements for commissioning of said timer has to be done by the contractor. " | — | — | — | 2,95,000 | |
| — | 6.00 | — | — | ||
| "Supply at site, Erection, Testing and Commissioning of 16m LED High Mast Lighting System with 6 Nos. of 200W LED Flood light fittings as per the detailed specification enclosed including casting of suitable RCC Foundation. Note :- 1) Drawing has to be submitted for approval before fabrication/Erection 2) Soil test shall be done for the Proposed location." | — | — | — | 35,82,000 | |
| — | 2.00 | — | — | ||
| "Re-installation, Testing and Commissioning of 12m High Mast Light to proposed sites as directed by site engineer in charge. The following scope of work included in the said work 1) Casting of Suitable RCC foundation for 12m High Mast 2) Supply and fixing of new Control Panel for 12m High Mast 3) Supply and fixing of 6Nos. 200W LED flood lights. 3) Supply and fixing of rope suitable for high mast. Note:- 1) Minor modificatuons in the site also to be done by the firm as directed by site engineers incharge. 2) Foundation bolt to be supplied by the firm. 3) High mast will be supplied by Railways. 4)Preferable Makes of lED flood lights :- Surya, philips, CG, Bajaj, GE, Wipro, HPL or any other reputed makes." | — | — | — | 5,60,000 | |
| — | 4410.00 | — | — | ||
| "Transportation &Laying / clamping / threading of 4 Core XLPE cable (Size up to & Including 70 Sq.mm) through trench, Cable protection pipe, Wall/shelters, FOB, etc as directed at site, with suitable clamps, Aluminium sockets, etc., Note: - Cable will be supplied by Railway from the Office of SSE/Electrical In-Charge of the work." | — | — | — | 2,86,650 | |
| — | 104.00 | — | — | ||
| "End termination using single brass compression gland of Size from 4 core 16 Sq.mm up to & Including 4 Core 25 Sq.mm with required aluminium sockets, etc.., Note:- 1) Scope of work including supply ad Fixing of said glands 2) PVC type glands may be used for cable termination in the poly carbonate box as directed by site engineer incharge." | — | — | — | 26,000 | |
| — | 3661.00 | — | — | ||
| Supply and laying /fixing of HDPE pipe 50mm dia pressure rating up to 4PN (Material Grade-PE 63) in the excavated cable trench/building wall/FOB etc.., With suitable GI fixing hardware like T-Joints, L-Joints, shall be used at appropriate locations. So that cable can be easily inserted and removed wherever need arises | — | — | — | 8,05,420 | |
| — | 2335.00 | — | — | ||
| Supply, laying and provision of 6 SWG GI wire as earth continuity including termination | — | — | — | 81,725 | |
| — | 14.00 | — | — | ||
| "Design, fabrication, supply, erection, testing and commissioning of 16 SWG indoor type medium voltage main distribution board with the following Incoming : 1) 1Nos. of MCCB 4 Pole 160A, 36kA similar to L&T Model No. CM92152OOOOAG with Microprocessor release adjustable over load, adjustable Short-circuit, Instantaneous protection, inbuilt ground fault protection. Outgoing 1) 3Nos. of MCCB 4 Pole 63A, 36kA similar to L&T Model No. DZ1F0063DXD1A with Thermal Magnetic Release, adjustable over load, adjustable Shortcircuit. 2) Multifunction meter similar to L&T model WL440521OOOO - 1 Nos., 3) Suitable length of electrolytic copper busbar of 25 x 6mm (main) 4) Indication lamp for 3 phase - 1 set 5) Approximate size of the panel - 1000mm x 1500mm x 300mm (L x H x D) and other standard fittings conforming to detailed specifications stated above and relevant IS," | — | — | — | 25,20,000 | |
| — | 3.00 | — | — | ||
| "Design, fabrication, supply, erection, testing and commissioning of 16 SWG indoor type medium voltage main distribution board with the following Incoming : 1) 1Nos. of MCCB 4 Pole 250A, 36kA similar to L&T Model No. CM92151OOOOAG with Microprocessor release adjustable over load, adjustable Short-circuit, Instantaneous protection, inbuilt ground fault protection. Outgoing 1) 3 Nos. of MCCB 4 Pole 100A, 36kA similar to L&T Model No. DZ1F0100DXD1A with Thermal Magnetic Release, adjustable over load, adjustable Shortcircuit. 2) Multifunction meter similar to L&T model WL440521OOOO - 1 Nos., 3) Suitable length of electrolytic copper busbar of 40 x 6mm (main) 4) Indication lamp for 3 phase - 1 set 5) Approximate size of the panel - 1000mm x 1500mm x 350mm (L x H x D) and other standard fittings conforming to the detailed specifications and relevant IS, " | — | — | — | 5,70,000 | |
| — | 1.00 | — | — | ||
| "Design, fabrication, supply, erection, testing and commissioning of 16 SWG indoor type medium voltage main distribution board with the following Incoming : 1) 1Nos. of MCCB 4 Pole 250A, 36kA similar to L&T Model No. CM92151OOOOAG with Microprocessor release adjustable over load, adjustable Short-circuit, Instantaneous protection, inbuilt ground fault protection. Outgoing 1) 3Nos. of MCCB 4 Pole 63A, 36kA similar to L&T Model No. DZ1F0063DXD1A with Thermal Magnetic Release, adjustable over load, adjustable Shortcircuit. 2) Multifunction meter similar to L&T model WL440521OOOO - 1 Nos., 3) Suitable length of electrolytic copper busbar of 40 x 6mm (main) 4) Indication lamp for 3 phase - 1 set 5) Approximate size of the panel - 1000mm x 1500mm x 350mm (L x H x D) and other standard fittings conforming to the detailed specifications and relevant IS, " | — | — | — | 1,85,000 | |
| — | 4.00 | — | — | ||
| "Erection of Open well Submersible pump capacity 3.0HP, 415V, 50Hz, 3 Phase AC Supply with delivery of 50mm to pump clear water at a head of 10m-26m with discharge 9.2 to 4.9 LPS. The said scope of work includes supply, fixing of Suitable size of MS Clamp (2 Nos.), NRV (1No.), Flange with washer (2Nos.), Nipple (1No.), etc.., Note: - 3.0HP pump will be supplied by Railway from the Office of SSE/Electrical In-Charge of the work." | — | — | — | 20,000 | |
| — | 4.00 | — | — | ||
| "Fixing of Three Phase Submersible Pump Controller /Starter panel similar to L&T Model No.MU-G10W DOL with in-built WLC (CS91037DOVO) suitable to operate 3.0HP open well submersible pump set. The said starter panel has to be consider supply and fixing of digital voltmeter, ammeter, thermal overload Relay, single phase preventer with dry run preventer, ON/OFF push button switch, LED indication for 3-phases. Note: - 3.0HP pump controller/Starter Panel will be supplied by Railway from the Office of SSE/Electrical In-Charge of the work." | — | — | — | 20,000 | |
| — | 5.00 | — | — | ||
| Supply and fixing of 150mm dia Cast Iron NRV as directed by site Enginer incharge. | — | — | — | 80,795 | |
| — | 4.00 | — | — | ||
| Supply and fixing of 100mm dia Brass NRV as directed by site Enginer incharge. | — | — | — | 81,204 | |
| — | 6.00 | — | — | ||
| "Erection of Open well Submersible pump capacity 5HP, 415V, 50Hz, 3 Phase AC Supply with delivery of 50mm (2"") to pump clear water at a head of 34m-50m with discharge 4.5 LPS conforming to IS 14220. The said scope of work includes supply, fixing of 50x10mm MS Clamp (2 Nos.), NRV (1No.), Flange with washer (2Nos.), Nipple (1No.), etc.., Note: - 5HP pump will be supplied by Railway from the Office of SSE/Electrical In-Charge of the work." | — | — | — | 36,000 | |
| — | 6.00 | — | — | ||
| "Fixing of Three Phase Submersible Pump Controller /Starter panel similar to L&T Model No.MU-G10W DOL with in-built WLC suitable to operate 5HP open well submersible pump set. The said starter panel has to be consider supply and fixing of digital voltmeter, ammeter, thermal overload Relay, single phase preventer with dry run preventer, ON/OFF push button switch, LED indication for 3-phases. Note: - 5HP pump controller/Starter Panel will be supplied by Railway from the Office of SSE/Electrical In-Charge of the work." | — | — | — | 24,000 | |
| — | 500.00 | — | — | ||
| Supply and fixing of plastic Rope (Nylon) 10mm to 20mm | — | — | — | 1,40,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .