10/EDC/S 2020-21

STP 8M-IS 410 SP-10 (Bottom Portion hot dip Galvanized)

Stay Set GI 16X1800 mm

Stay Wire GI 7/3.15mm 7/10 Swg

Earthing Rod MS 20X2500 mm

LT XLPE AB Cable 3X95+1X70 Sqmm

LT XLPE AB Cable 3CX25+25 Sqmm

LT XLPE AL Cond Unarmoured Power Cable 1X25 Sqmm

GI Wire 5mm/6 SWG

Insulation Piercing Connector (IPC)

(A):-Suiteble for jumpering for Line to Line to Taping 95sqmm-25 sqmm

(B):-Suiteble for jumpering for Line to Line to Taping 25sqmm-25 sqmm

(C):-Suitable for jumpering for Line To DB Taping 95sqmm-25sqmm

(D):-Suitable for jumpering for Line To DB Taping 25sqmm-25sqmm

(A):- LT Wire Neutral Connector PG Clamp 70sqmm to 70sqmm

(B):- LT Wire Neutral Connector PG Clamp 25sqmm to 25 sqmm

Ded End Clamp With Assamble for ST Pole (Made of M.S flat 50x6 mm) without cracks & burrs, painted by primers with Nut & Bolt.

Suspension Clamp With I Hook & With Assamble for ST Pole (Made of M.S flat 50x6 mm) without cracks & burrs, painted by primers with Nut & Bolt.

Stay Clamp for ST Pole (Made of M.S flat 50x6 mm) without cracks & burrs, painted by primers with Nut & Bolt.

Half round clamp for STP/SP 10 Pole (made of MS Flat 50x6mm withot cracks and burrs painted by primer with Nut & Bolt (Two No for one Distribution Box)

Alu Lug For Sutibale Size

LT Distribution Box

(A):- LT Distribution Box Single Phase

(B):- LT Distribution Box Three Phase

Safe carriage of following material from Store center Srinagar to Road side of work by Pvt Vehicle including Loading and Unloading at both end .(51 to 70 KM)

(A):-STP 8M-IS 410 SP-21 (Bottom Portion hot dip Galvanized)

(B):- AB Cable and Other Small Line Material

Safe carriage of Stock Material from from Road Side to Pit Site by manualy with loading & unloading at both ends . (Up to 0 to 1Km) Rate are Per Pole/Km

(A):-STP 8M-IS 410 SP-21 (Bottom Portion hot dip Galvanized)

(B):- AB Cable and Other Small Line Material

Erection of single ST Pole SP-10 with fixing of all fitting and fixtures for LT line complete including back filling of pit by earth & stone.

Grouting of stay 0.6x0.6x0.3 mtr with 1:4:8 cc. including fixing Stay clamp & Nozzling of stay wire at both end

Electrode earthing of pole earthing with M.S electrode & digging of (Pit size 2.1x1.5x1 mtr.) for the grouting of the electrode earth by welding method. Work complete in all respect.

Dismantling of Old ACSR Weasel Conductor from esisting LT Line Including Re Rolling cartage from Site Work to UPCL Store.

Laying,Strining & Sagging of AB cable (All Size) and DB Charged Cable Include. Including Fixing of Insulated Piering Connecto, Ded & Clamp With I Hook, Suspention Clamp with I Hook In All Complate Work.

Installation of L.T.Distribution Board Including Fixinf Of Half Calmp With Nut and Bolt In All Complate Work.

looping&chooping of tree branches which are touching of HT/L.T line

Disconnection & Re-connection of service connection

Saun Engineering and Construction Co P Ltd