Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹4.7 LAccepted-AOC | ₹4.7 L | 1 | Accepted-AOC LI |
| 2 | 2₹4.7 L+₹2,258 (0.49%)Rejected-Finance | ₹4.7 L+₹2,258 (0.49%) | 2 | Rejected-Finance resolution |
| Sl No | Description | Qty | Unit | RANS CONSTRUCTION L1 | MOHAMMED RAFI M L2 |
|---|---|---|---|---|---|
| 1.00Truss work and Sheet Roofing | |||||
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 871.18 | kg | 160 ₹1,39,388.48 Lowest | 175.79 ₹1,53,144.38 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 84 | kg | 135 ₹11,340 Lowest | 141.04 ₹11,847.36 |
| 1.00 | OD541777/2024-2025:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 30.15 | sqm | 498 ₹15,014.7 Lowest | 520.26 ₹15,685.84 |
| 1.00 | 12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2 | 15.2 | metre | 740 ₹11,248 Lowest | 773.86 ₹11,762.67 |
| 1.00 | OD541786/2024-2025:Providing and fixing 200 mm wide, square cut PVC 4kgf/cm2 rain water gutter pipe with iron
brackets with 25x5 mm size flat, screws and washers etc., including making necessary
connections with rain water pipes etc. complete. | 5.5 | metre | 422 ₹2,321 Lowest | 440.91 ₹2,425.01 |
| 1.01 | 50.18.9.18.1:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall | 20 | metre | 249 ₹4,980 Lowest | 259.9 ₹5,198 |
| 1.01 | 50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 24.31 | cum | 6,900 ₹1,67,739 | 6,132.08 ₹1,49,070.86 Lowest |
| 1.01 | 5.47.2:Providing and fixing in position factory made precast RCC M-40 doors and win frames having excellent smooth finish as per IS:6523 with reinforcement of 3 Nos, 6 mm dia main bars tied with 3 mm M.S stirrups placed @ 200 mm CC nad 6 numbers high strength polymer blocks of required size for fixing hinges including providing 6 no specially designed M.S galvanised sleeves for accomodating 6 mm dia fully threaded bolts for fixing hold fast on vertical members, providing suitable arrangement for receiving sliding door bolts and tower bolt etc all complete, as per the direction of Engineer in charge. (The cost of hold fast and cc block of 1:3:6 mix is also included in the item.) The frame shall be measured in running meter correct to two places of decimal.Door frame 100 mm x 60 mm. | 27.6 | metre | 644 ₹17,774.4 Lowest | 673.33 ₹18,583.91 |
| 1.01 | 5.22A.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more | 37.41 | kg | 87 ₹3,254.41 Lowest | 91.01 ₹3,404.41 |
Tender Value
₹5.1 L
EMD Value
₹12,705
Closing Date
26 May 2025, 3:00 pmClosed
AE LIDEW EDAVANNA
AE LIDEW EDAVANNA
169/25 KMMMGLP SCHOOL MUNDENGARA SMART CLASS ROOM
2025_LSGD_763841_6
T1/2025-26/AE/LID/EW
Open Tender
Civil Works - Roads
Item Rate
EDAVANNA
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,125
₹12,705
25 Feb 2026
13 May 2025
28 May 2025
13 May 2025
26 May 2025
13 May 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .