Repair Renovation of base camp at Thanamang Darhal including fencing, Main Gate and allied works 3rd Call

Amount

Earth work in trench excevation in all kinds of soils disposal lead upto 25.0 mt and lift upto 1.50 mt.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-all work upto plinth level. 1:5:10 ( 1cement: 5 coarse sand : 10) using 40mm size stone aggregate

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level 1:3:6 using @20% plums

Centering Shuttering including struting proping etc and removal of form work

Foundation

Coloum

Reinforced cement conceret work in (1:1.5:3) grade using 20mm size stone agg. (Kitchen Shelf)

Reinforcement for RCC works including straightening, cutting bending and placing in position and binding all complete

Providing and fixing G.I chain link fencing of required width in mesh size 25x25mm made of G.I wire 3mm dia upto hight of 3 feet incl. strengthing with 2mm dia wire or nuts bolts etc. complete.

Structural steel work in single section with or without connecting plate.

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (In gratings, frames, guard bar, ladders, railing brackets, gates & similar works.)

Providing wood work in frames of doors ,windows ,celestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or with dash fasteners shall be paid for separately (Sal Wood)

Half brick masonry with brick of class designation 75 in foundations and plinth with Extra for half brick masonry in superstructure above plinth level upto floor V level cement mortar 1:4 (1 Cement : 4 coarse sand)

Repair to plaster of thickness 12mm to 20mm of area 2.50 sq.m and under including cutting of patch in proper shape raking out joints with cement mortar 1:4 mix

Removing dry or oil bound distemper, water proofing cement paint and the like.

Providing and fixing glazed shutter for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S pressed, butt hinges bright finished of required size with necessary screw 35mm thick using second class D- wood.

Renewing glass panes with wooden fillets.

Providing and fixing glass panes with putty and nails (float glass panes 5.0mm thick weight not less then 12.50 kg/sqm)

Designing Fabrication,testing installing and fixing in position curless wall Alumunium composite panel (ACP) Cladding.

Demolishing cement concrete work manually/by mechanical means incl.disposal of material within 50meters lead as per direction of in 1:4:8 or leaner mix (i/c equivalent design mix)

Richer conceret

Leaner Concrete

Dismantling tile work in floors and roofs laid in cement mortar.

Providing and fixing Ist quality ceramic glazed tiles conforming to IS: 15622 of minimum thickness 5 mm of approved make like NITCO, ORIENT,SOMANY KAJARIA, or equivalent make in all colour, shades except burgundy, bottle green, black of any size as approved by Engineering-Charge in skirting, riser of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (300mmx300mm)

Providing and laying of ceramic glazed floor tiles conforming to IS: 15622 of approved make like NITCO, ORIENT,SOMANY KAJARIA, or equivalent make in all colour, shades except burgundy, bottle green, black of any size as approved by Engineering-Charge in skirting, riser of steps and dados over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) and jointing with grey cement slurry pointing in white cement mixed with pigment of matching shade complete. (300mmx300mm)

Providing and Laying vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colour and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete.( 600x600)

Providing and fixing gaug saw cut, mirror polished, premoulded and prepolished mechine cut

Providing fixing 35mm wire guage shuuters using galvanised MS wire guage of avg width for aperture 1.4mm in both direction with wire of dia 0.63 mm for doors,windows and celestory windows wing hinges and necessary screw.ISI marked MS pressed bright finished butt hinges with necessary screw of required size Second class deodar wood

Providing and applying white cement based putty 2mm thick to make the surface even and smooth.

Applying of one coat of thinable cement primer aproved brand

wall painting with acrylic emulsion paint voc context less than 50 grams/littre

Painting with synthetic enemal paint two or more coats over and under coat of ordinary paint (on wood work).

Painting with synthetick enemal paint of approved brand (steel work)

15mm thick cement sand plaster in 1:6 mix

Finshing walls with water proofing cement paint.

Providing/fixing of saintary fittings

Exhaust Fan

One pice English Seat(Jaquar)

Cistern

platn Seat

Kitchen Sink(double)

Angle Val.

Long Nose Bib Cock

G.I Pipe 20mm dia internal

G.I Pipe Excluding trenching and refilling

Looking Glass

PVC Pipe 110mm dia

PVC Pipe 75mm dia

Chequrred precast cement conceret tiles 22mm thick in (1:4) mix dark shade using ordinary cement.

Providing and fixing dry cladding upto 10mm height with 30mm thick (Red sand stone)

Providing and fixing of cup-board frame and shutter using all required material like wood ,plywood,Mica, lipping and all others required assessories as per site requirement

Carriages of Materials

Sand 150 km by MT

Bajree 50 km by MT

Stone 10 km by mt

Bricks 170 km by mt