Repair and Maint of MAP pattern Furniture and various Types of Trade Pattern Furniture at AFS Jodhpur

Amount

CHAIR DINING WITH CUSHION (TP, FD/E6/MAP/10) S & F of following existing old broken wooden components of chair dining similar items carefully without disturbing the adjoining parts and new components made out of hard wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, glueing,placing every part in-tact all as specified in Drg and directed by Engr - In Charge.

Back rest Stiffener

Bottom leg stiffener

Front legs

Rear Legs

Rubber/PVC shoes

Replacement of cloth for seat of repaired chair dining with cushion best quality of approved cloth of various all as specified on drawing or as directed by Engineer-in-charge.

Replacement of cloth for back of repaired chair dining with cushion best quality of approved cloth of various all as specified on drawing or as directed by Engineer-in-charge.(for TP Chair Dining with cushion only)

M&L for preparation of wooden surfaces of chair dining with cushion by scraping with sand paper, redusting and apply putty wherever required and polishing the surface with french polish to get glossy finish all as directed by Engr-in-Charge.

SOFA SET 1/4/ 5 PERSON WITH CUSHION (FD-281, FD/MAP/06)

Removing the existing unserviceable tapastry cloth, cushion of sofa set and replacing with new tapastry cloth including mulmul with foam cushion 40 density 100mm thick of size 558mm x 533mm x 100mm, rest all as shown on drg and as directed by Engr-in-Charge. Note :- (i) Each cushion for seat or back will be measured as single unit. (ii) The tapastry cloth shall be mat finish and shall not less than Rs. 350/- per metre and as approved by Engr-in-Charge.

Removing the existing unserviceable tapastry cloth of sofa set and replacing with new tapastry cloth mat finish of size 558mm x 533mm x 100mm with mulmul cloth.

Removing the existing unserviceable front leg from Sofa and providing new hard wood of leg size 70mm x 35 mm x 300mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing the existing unserviceable rear leg from Sofa and providing new hard wood leg size as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable Arm rest from Sofa and providing new hard wood Arm Rest of size as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable side rail from Sofa and providing new hard wood side rail of size as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable bearer from Sofa and providing new hard wood bearer of size as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable battens from Sofa and providing new hard wood battens of size 50mm x 20 mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable front rail from Sofa three seater and providing new hard wood front rail of size as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable front rail from Sofa single seater and providing new hard wood front rail of size as shown on drg and as directed by Engr-in-Charge.

M & L for fixing of PVC shoes superior quality with fixing of screws as specified & directed by Engr-in-charge.

M&L for preparation of surfaces by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing two coat of french polish to old and new surface of sofa set 4 Seater and as directed

M&L for preparation of surfaces by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing two coat of french polish to old and new surface of sofa set 5 Seater and as directed

TABLE COMPUTER (Drg No. TP, FD/E6/MAP/03 ) : Removing of old unserviceable the following parts from Table Computer, and supply and fix new following parts duly finished in shape in existing position of size all as shown on drg and as directed by Engineer-in-charge.

S&F in replacement table top of 18 mm thick prelaminated particle board, exterior grade, including PVC beading of standard size all around fixed to frame with glue/fevicol complete all as specified in drawing and directed.

S&F in replacement Drawer of size and shape as per drawing along with two telescopic chanel of best quality and shade complete all as specified in drawing and directed.

S&F in replacement key board tray and knob and handles of size and shape as per drawing along with two telescopic chaanel of best quality and Shade complete all as specified in drawing and directed.

M & L for fixing retangular PVC cover of size 25mmx50mm all as specified.

M & L for removing and replacement old u/s sides of Table Computer of same size and shape made up of prelaminated particle board, exterior grade, complete all as specified in drawing and directed.

TABLE DINING 4 PERSON (1200X900) (FD - 273) Repair to table dining 4 pers including dismentalling/removal of all broken parts and replacing with new parts of hard wood as under complete all as specified under directed:-

Top made out of 18mm thick pre laminated particle board shade and texture as approved by engineer in charge with matching Indian Teak wood edging.

Leg made out of hard Wood

Long Rail made out of hard Wood

Short Rail made out of hard Wood

S& F new bracket of size 100 x 100 x 30 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete as directed by Engr-in-charge

Centre stiffner made out of hard Wood

Rubber/PVC shoes

M&L for preparation of surfaces by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing two coat of french polish to old and new surface of table and as directed

TABLE BED SIDE (MAP) (FD/E6/MAP/15(R)

M & L for removing old UNSV drawer with telescopice channel from table bed side and S & F new drawer made out of 12mm thick both side pre laminated particle board exterior grade for sides and 18mm thick both sides pre laminated particle board exterior grade colour shade matching with existing board for front & back of drawer including 12" long telescopic channel heavy duty for both side of drawer duly fixed suitable screws and all as specified and directed by Engr-in-Charge.

M & L for removing old UNSV left or right side from table bed side and S & F new left or right side made out of 18mm thick both sides pre laminated particle board exterior grade colour shade matching with existing board duly fixed with suitable screws/nails and all as specified and directed by the Engr-in-Charge.

M & L for removing old UNSV cabin shutter from table bed side and S & F new shutter made out of 18mm thick both sides pre laminated particles baord exterior grade colour shade matching with existing board duly fixed with suitable hings matching with existing hinges fixed with screws/nails and all as specified and directed by the Engr-in-Charge.

M & L for removing old UNSV top or bottom from table bed side and S & F new top or bottom of 18mm thick both sides pre laminated particle board exterior grade colour shade matching with existing board duly fixed with suitable screws/nails and all as specified and directed by the Engr-in-Charge.

M & L for removing old broken handle from drawer / shutter of table bed side and S & F new S/S 'C' shape handle 75mm duly fixed with suitable machine screws and all as specified and directed by the Engr-in-Charge.

TABLE DRESSING LADIES (FD-32(M), 251)

S&F in repairs table top of Table dressing ladies with 18 mm thick pre-laminated particle Board of approved make, all as specified on drawing or as directed by Engineer-in-charge.

S&F in repairs new Glass shuttrs of Table dressing ladies all as specified on drawing or as directed by Engineer-in-charge.(Each glass shutter shall be measured as single unit)

M & L for complete Lower box made out of Prelaminated particle board with drawer all etc complete all as per drawing as specified & as directed by Engr-in-Charge:-(back shall be 06 mm ply)

M&L for removing old u/s broken looking mirror and S&F new looking mirror of size 760 x 380 x 5mm & frame made out of teak wood of size 25 x 6 mm & 6mm thick commercial ply on back including polishing the frame complete all as directed.

Supply & fixing of Knob of aluminium anodized dark brown in shade as approved and fixing with screws as specified & as directed by Engr-in-Charge:-

M & L for fixing of PVC shoes superior quality fixing with screws as specified & directed by Engr-in-charge.

M&L for preparation of surfaces by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing two coat of french polish to old and new surface of table and as directed

ALMIRAH LARGE STEEL WITH SHELVES, ALMIRAH STEEL (FD-1031 & 1033)

Removing UNSV shelves from almirah Large steel & S & F new shelves made out of 1mm thick plain sheet fixed with appropriate clamps/screws/ nuts & bolts complete all as specified and directed

Removing UNSV locks from almirah & S & F new 6 levers locks, Godrej pattern , with duplicate and key & hole cover and all as specified and directed .Make:Harrison/Link/Lico

Removing UNSV handle & S & F new steel anodized handles Godrej pattern with suitable bolts and all as specified and directed.Make:Godrej/Link/Classic or equivalent.

Removing UNSV locking assembly & S & F new locking assembly with cover complete all as specified and directed .

M & L for denting & painting of Almirah large steel both internally and externally with synthetic enameled paint of silver/ grey colour with spray gun after properly smoothening the steel surface with the help of Sand paper/ electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed .Make:Asian Paint/Jonson & Jonson/Shalimar

ALMIRAH MEDIUM STEEL W/SHELVES : FD-1032

Removing UNSV shelves from almirah Medium steel & S & F new shelves made out of 1mm thick plain sheet fixed with appropriate clamps/screws/ nuts bolts complete all as specified and directed.

Removing UNSV locks from almirah & S & F new 6 levers locks, Godrej pattern , with duplicate and key & hole cover and all as specified and directed.Make:Harrison/Link/Lico

Removing UNSV handle & S & F new steel anodized handles Godrej pattern with suitable bolts and all as specified and directed.Make:Godrej/Link/Classic or equivalent.

Removing UNSV locking assembly & S & F new locking assembly with cover complete all as specified and directed.

M & L for denting & painting of Almirah Medium steel both internally and externally with synthetic enameled paint of silver/ grey colour with spray gun after properly smoothening the steel surface with the help of Sand paper/ electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed.Make:Asian Paint/Jonson & Jonson/Shalimar

LOCKER BED SIDE STEEL( FD-127(M)

M & L for denting & painting of locker bed steel both internally and externally with synthetic enamled paint of silver/grey colour with spray gun after properly smoothiening the steel surface with the help of sand paper/electric grinder applying putty on dents and providing a coat coat of complete all as specified and directed .Make:Asian Paint/Jonson & Jonson/Shalimar

Removing UNSV & S&F hasp & staples 75mm long as per drg complete all as specified and directed.

Removing UNSV & S&F MS steel CP handles 100mm as per drg complete all as specified and directed .Make:Godrej/Link/or Equivalent

Removing UNSV & S&F stainless steel conduit pipe 20 mm dia as a hanging rod 16 guage thick as per drg complete as specifed and directed,

Removing UNSV & S&F new shelves made out of 1mm thick plain sheet allas per drg complete as specified and directed.

Repair of Chair Varandah :-FD/E6/MAP/12

M & L for removing old unsv plastic sheet seat & back of Chair Varandah and S & F new seat and back (Colour Black) best quality plastic sheet of approved Make MK Polymar,required welding work for broken frame and S & F 2 nos of 10mm iron rod for supporting for bottom of chair varandah equal distance and redusting and applying two coat of synthetic enamel paint black colour over a coat of red oxide primer of approved make and providing suitable hard rubber shoes 4 Nos approved quality for each chair and all as specified and as directed by Engr-in-charge. Make of Paint:-Berger/Asian paint/Jonson and Nicholson Paints.

Repair Chair Computer , Chair Revolving Low/Med Back, Chair Revolving With & Without Drg - ( Trade Pattern)

Removing UNSV/torn out and S & F new seat & back made out of 12mm thick hot pressed plywood duly upholstered with fabric/rexin/leathertte as existing on chair & moulded polyurethane foam and the back foam shall be designed with contour lumber support with PVC lipping all around. The cushions shall be of 40 density, 75mm thick for seat & 50mm thick for back alongwith the fabric of approved quality & colour complete all as specified and directed .

Removing UNSV & S & F castor wheels heavy duty as per the approved sample complete all as specified and directed by Engr-in-Charge.

Removing UNSV & S & F new handrest matching with existing all in shape,size,material & quality complete all as specified and directed. .

Removing UNSV & S & F new pedestal assembly matching with existing all in shape,size & quality complete all as specified and directed.

Removing UNSV & S & F new synchro tilting mechanism complete all as specified and directed.

M & L for servicing the gas lift mechanism for making the seat adjustment functional.complete all as specified and directed.

Chair writiing, chair visitors : (FD/E6/MAP/12, DELITE HI-TECH & GODREJ & GEEKEN)

Removing UNSV & S & F new seat & back made out of 12mm thick hot pressed plywood duly upholstered with fabric & moulded polyurethane foam and the back foam shall be designed with contour lumber support with PVC lipping all around. The cushions shall be of 40 density, 50mm thick for seat & 50mm thick for back alongwith the fabric of approved quality & colour complete all as specified and directed.

Removing UNSV & S & F new handrest matching with existing all in shape,size,material & quality complete all as specified and directed. .

REPAIR OF CHARPOY GI PIPE FD-220

Removing old unserviceable nylon newar from charpoy GI pipe and S & F 12mm thick BWR Gde plywood commercial type of size 1980x900mm to charpoy GI pipe frame by providing 03 Nos of flat Iron at equal distance size 40mm wide X 6mm thick and length shall be provided by existing charpoy GI and flat Iron shall be fixedt tightly to Chapoy GI with the help of suitable nut,bolt & washer of size 62-65 mm & 6 mm dia by drilling holes into GI Pipe alongwith any welding if required . The plywood shall be fixed on the charpoy by drilling 16 Nos holes (03 Nos on each long rail, 2 Nos on each Short rail & 2 nos on each iron flat) & fixing with nut bolt along with suitable washers of size 62-65mm and 6mm thick and all as specified and directed by.Make:Greenply or other equivalent Make.

M&L for removing unserviceable three way elbow 32 mm dia and S & F new three way elbow 32 mm dia medium grade (ISI marked) and all as shown on drg.

M&L for removing the threadless/broken long rails from charpoy GI Pipe 32 mm dia and supply and fix new long rail made of 32 mm dia GI Pipe medium grade 1.88 mtr long threaded at both ends and fix to existing three way elbow 32 mm dia and all as shown on drg.Make:-Prakesh Surya/Jindal/Tata

Removing of old damaged/broken long rail from Charpoy GI 32mm dia and making of short rail from u/s long rail retreived from Ser No 03 above including threading on both ends & fixing in charpoy GI pipe all as specified and shown on drg.

Removing of old damaged/broken Short rail from Charpoy GI 32mm dia and making of leg from /s short rail retreived from Ser No 04 above including threading & Supply & Fixing 3mm thick MS plate 50mm dia in bottom to be welded with legs & fixing in charpoy GI pipe all as specified and shown on drg and directed by Engr-in-charge.

KAMAL ENTERPRISES (BID ID -3510714)

Vinayak Distributors (BID ID -3510826)

SK INDUSTRIES (BID ID -3510577)

PRAFUL ENTERPRISES (BID ID -3506648)