Construction of Flood Light to Villadam Stadium in Div-6 - Thrissur Corporation -Electrification of 30 M High mast lights for Villadam stadium

Amount

Electrical

OD300706/2025-2026: Design,manufacturing,supply,of Hot Dip Galvanised, polygonal high masts with fixed head frame suitable for mounting 12 nos of 1000 w flood light fixtures complete with all accessories as required. The height of the mast from base up to top of head frame shall be 25.0 mtrs. High mast shall be polygonal, tepered, hot dip galvanized with suitable fixed type head frame for mounting the flood light fixture. Masts shall be structurally designed in accordance with ILE Technical report no 7-1996 edition considering the gust wind speed as per IS 875. The steel used in the construction of the masts shall comply with BSEN 10025, J355 or equivalent. All welding shall be undertaking and performed as per WPS/PQR in strict accordance with BS5135. or AWSD1.1. The head frame cross arm brackets shall be of suitable steel construction. The mast manufacturer shall be accredited with ISO 9001 and shall have thair own manufacturing plant and the registration certificates, TUV, OSHAS certifications to be submitted along with the bid. All MS parts including hardware shall be hot dip galvanized as per BSEN-ISO1461 or equivalent. The connection between the head frame and mast top shaft is by a flanged joint and bolted together. No slip joints in this position shall be used. The head frame shall have ladder and platform for operator use. The stadium mast system be equipped with special safety cage ladder arrangement for climbing up the mast. Access to the floodlights on the head frame shall be by a vertical ladder of the full head frame height. Wind tunnel certificate of high mast prototype from a reputed India organisation like IIT of which the bidder proposes to supply should be submitted along with the tender. Bidders to possess similar experience of having executed stadium mast with minimum height of 30 metres. (make Bajaj/Transrail/Lysaght)

OD300667/2025-2026:Supply of 1000 W LED Sports lighting floodlight luminaire with a robust single piece die cast aluminiuam housing with corrosion resistant powder coting and toughened glass to IP 66 and IK 08 protection. The Luminaire shall UV resistance non yellowing polycarbonate/PMMA lens to ensure desired photometry. Lens should be mechanically fixed by glue is not acceptable. The optics should be having a good throw & spread to achieve a better overall uniformity. The LED used shall be high power with >1w to <5W. The luminaire should have CRI > 70, and CCT of 5700K and shall be compliant with IP66 and IK07 classification. Luminaire shall be designed to emit at least 140000 nominal lumens with system efficiency of at least 140 lumen/watt. Operating Temperature range is -10degC to 50 degC. The luminaire shall be designed to ensure lumen depreciation L70 over 50000 burning hours as per LM 80 report. The luminaire should have fine on the back to ensure good heat dissipation and to prevent dirt from setting on the luminaire along with aiming angle scale. Driver should be fully potted BIS certified and shall have a power factor >0.95 and THD <10% with a minimum inbuilt surge protection of internal 4kv & external 10kV and suitable for an operating voltage range of 120 to 280V AC and cutoff at >300V AC and self restore. Driver should sustain up to 8 hours at 440V AC.Driver should comply Driver safety requirements as per IS 15885 with BIS certification. Manufacture should have in house NABL testing facility. LM 79 report from NABL accredited lab shall be submit. The luminaire should comply with all the required IES and IS standards. The supplier or OEM shall ensure that brand be visible on all equipment supplied for the work and same should be eponymous as their company name as per incorporation documents. Make (Bajaj/Transrail/Osram/Kesselec)

OD288995/2025-2026:Supply of foundation bolts manufactured from special steel of EN 8 grade along with nuts, washers, anchor plates and common template. The exposed portion of the foundation bolts shall be not dip galvanised.

14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

14.10:Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement).

14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels

OD280686/2025-2026:Supply and providing tor steel rod for reinforced cement concrete including cutting bending and tying in shape as required

OD288997/2025-2026:Supply, Installation on top of the high mast testing & commissioning of LED based Aviation obstruction light luminaire 230 v AC , weather/corrosion resistance lamp assembly and housing, self contained wiring compartments eliminates additional boxes and accessories interconnection etc. With indication lamps, accessories etc.

OD288240/2025-2026:Supply & erection of outdoor Main Distribution panel made up of 14 SWG CRCA sheet double door type angle iron frame / pedestal mounted totally enclosed with IP55 degree of protection with canopy suitable for use on 415 volt 3 phase 4 wire 50 Hz system having 160A 4 POLE MCCB as incomer and 4 nos 100 A MCCB, 1 No 32 A MCCB outgoing. Aluminium bus bar interconnection etc. with indication lamps, accessories etc.

OD288239/2025-2026: Supply & erection of outdoor Highmast control panel made up of 14 SWG CRCA sheet , double door type, angle iron frame / pedestel mounted totally enclosed with IP55 degree of protection with canopy suitable for use on 415 V 3-phase,4 wire, 50Hz, system having 80 A 4 pole MCCB as incomer and 15 nos 16 A DP MCCB outgoing for individual control of the luminaires Aluminium bus bar interconnection etc. with indication lamps, accessories etc

OD288238/2025-2026: Supply & erection of outdoor street light control panel made up of 14 SWG CRCA sheet , double door type, angle iron frame / pedestel mounted totally enclosed with IP55 degree of protection with canopy suitable for use on 415 V 3-phase,4 wire, 50Hz, system having 32 A 4 pole MCB as incomer and timer / contactor circuit for the automatic switching of luminaires etc. as required

90.15.3.3:Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 200x200x12 mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc. complete 6 Meters

90.15.4.3:Supply Conveyance, installation, testing and commissioning of 70W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

90.12.10.2:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size

90.12.10.3:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation63/50 mm or nearest size

90.12.5.28:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 35 sq mm

90.12.5.30:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 70 sq mm

90.12.5.40:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 10 sq mm

90.6.5.13:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 4.00 sq mm

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

5.9:Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

BIJU JOSE (BID ID -2367526)

M P SUBASH (BID ID -2367376)

Bidder Name

M P SUBASH

BIJU JOSE

candelaengineering corporation