SPL REPAIR TO BLDG NO. T-197 AND GOVT MD ACCN NO 165 AT MAP PH-II, PKT - VI OF SUJJAN ENCLAVE AT MIL STN DHARCHULA.

Amount

DESCRIPTION OF ITEMS

Demolition of cement concrete in ground floor,paving nexc 15cm thick(below or above GL) complete all as specified and directed.

M & L for 50mm thick PCC 1:3:6, type C-1, as in Plinth protection etc finished even & smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metre and at change in direction complete all as specified & directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC 1:5:10 type E2 (using 40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

Roughening surfaces of old concrete surface by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

M&L for brushing neat cement slurry with 3.0kg of cement per sq. metre incl water proofing compound and filling of cracks,joints etc and making good complete all as specified & directed. Note-Water proofing compound to be paid for separately.

Supply only integral water proofing compound complete all as specified and directed.

M & L water proofing treatment on existing roof/sunken floors including removing existing treatment with the following specification complete (a) Apply bituminous primer @ 0.5 Ltr/Sqm confirming to IS 3384-1965 on prepared surface till the surface is properly pregnated (b) Apply hot bitumen 85/25 grade @ 1.2 Kgs/Sqm confirming to IS 702-1988 (c) Laying APP based polymeric water proofing membrane minimum weight not less than 3.0 Kg/Sqm and minimum 2 mm thick reinforced with polyster non wove fabric (Wt not less than 150 gms/sqm) laid on primed surface by forced application complete with as per manufacturer instructions confirming to IS complete all as specified and directed. (d) Applying a coat aluminium paint min. 0.20ltr/sqm as per manufacturer's instructions.

Demolition of brick work, stone/boulder masonary built in cement mortar complete all specified and directed.

M&L for Pre-cast cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed.

Taking down cement plaster on brick or stone walls, of any description including raking out joints, hacking for key, scrubbing down with water, etc complete all as spfd and directed.

M&L 12mm thick rendering in CM 1:6 on other than fair faces of brick work or concrete surfaces including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L Rendering 5mm thick in CM (1:3) on fair faces of brick work/ concrete surfaces in ceiling to be finished even and smooth without using extra cement complete all as specified and directed.

M&L for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification two or more coats including priming coat over 1mm thick wall putty on new work complete all as specified and directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less that 50gm/liter and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter / 10 Sqm over and including priming coat of exterior primer applied @0.90 liter/10 Sqm over 1mm thick wall putty over new surfaces complete all as specified and directed.

M&L three coats of white wash on ceiling surfaces including prepration of new plastered surfaces complete all as specified and directed.

M&L for two coat of synthetic enamel paint over a coat of pink primer to new wooden surface of any description exc 10 cm girth or width including prepration of new wooden surfaces complete all as specified and directed.

M/L for two coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces of any description over 10 cm in width or girth incl preparation of new steel surfaces complete all as spfd and directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less that 50gm/liter and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter / 10 Sqm over and including priming coat of exterior primer applied @0.90 liter/10 Sqm over 1mm thick wall putty incl complete removal of existing treatment complete all as specified and directed.

M & L for one coat of white wash on old decorated wall surfaces including preparation all as specified and directed.

M&L for two coat of Oil bound distemper on old decorated wall surfaces incl 1mm thick wall putty and preparation all as specified and directed.

M&L for one coat of synthetic enamel paint to old wooden surface of any description exc 10 cm girth or width including prepration complete all as specified and directed.

M/L for one coat of synthetic enamel paint to old steel surfaces of any description over 10 cm in width or girth incl preparation of old steel surfaces complete all as spfd and directed.

M & L for preparation of old plastered surfaces of ceiling by rubbing down and making surface smooth and applying one coats of white wash complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M/L for non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface,300x200/450x350x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick plaster in CM 1:4 complete all as spfd & directed.

M & L for Machine cut kota stone slab flooring 18-20mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 15 mm thick screed bed in CM 1:4 including providing 10 cm wide white marble border complete all as specified and directed.

M&L Granite (of any type) tiles 16-18 mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15mm thick screed bed in CM 1:4 etc complete all as specified and directed.

M & L for grinding and mirror polishing on existing marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete complete all as specified and directed.

Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down shutter exc 1.0 sqm but n exc 2.00 sqm each complete all as specified and directed.

S&F Pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

S&F Pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

M&L Cement concrete type C1 1:3:6 (20 mm graded stone aggreagte) as in filling inside pressed steel chowkhats complete all as specified and directed.

S&F for mild steel framed wk as in doors or gates of angle iron or other section complete drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding with & incl either hooks & hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and slides) & hanging, also fastening & fixing Fe-290, Gde-165 complete all as spfd & directed.

S&F 0.63 mm th Mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams,including bending or turning up, mitred angles, etc. as required complete all as spfd & directed.

S&F 35 mm th Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and providing 3-6mm thick teak wood lipping complete all as specified and directed.

M&L for 2nd class hardwood, 35 mm thick glazed and skelton shutter, open rebated and prepared to receive glass, gauge, etc. devided into squares, with plain, chamfered or rounded , mitred and rebated shash bars any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass etc; size of members of shutter as specified in SSR Part I, Sectioin 8 clause 8.24(a); supplied and fitted to chowkhat complete all as specified and directed.

S&F for anodised aluminium frame for doors, windows ventilator with one or more rebates including joining cleat for fixing etc , screws, hinges, brackets, dash fastners/rawl plugs etc. complete all as specified and directed.complete all as specified and directed.

S&F for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified and directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed.

M&L for 18/19mm thick medium density fibre board,one side decorative choice laminated other side balancing lamination, exterior grade, fixed with screws to timber frame work all as spfd and directed.

S&F 3-6mm thick teak wood lipping fixed with nails to board all as spfd and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised (width of flaps 30mm) all as specified.

S&F 40mm dia cupboard knobs fixed with nut, screw and washer of mild steel bright finished complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or descrption) from frame including removal from alumnium frame or other of any type complete all as specified and directed.

S&F 4.80 mm thick sheet glass ordinary quality in alumnium door/windows etc and glazing in each panels incl necessary arrangement for fixing complete all as specified and directed.

S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 100 mm mild steel but hinges medium weight,cold rolled complete all as specified and directed.

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.

S&F 150 mm aluminium handles, cast type anodised complete all as specified and directed.

S&F150 mm aluminium anodised barrel tower bolts extruded section complete all as specified and directed.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 200-300mm, ordinary rat tail rod pattern springs including roller and mild steel roller plate complete all as specified and directed.

Dismantling mild steel work of any description and in any position complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks,cooler stand,caging for solar panels and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F in repairs vitreous china wash hand basin incl pedestal, white flat back size 550X400mm incl 32mm size waste fittings, brass chromium plated,waste pipe and brackets fixing in position complete all as specified and directed.

S&F in repair Vitreous China Wash down water closet EWC with plastic seat cover complete all as specified and as directed.

S & F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connection union to pipe overall size 914 mm x 460 mm ,bowl size 405 mm x 354 mm complete all as specified and directed.

S & F in repair plate rack with min. overall size of 750x600x250mm with min. 0.60mm th stainless steel sheet complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10ltr capacity, with syphonic, action PVC float valve, brackets and 32mm bore PVC flush pipe etc complete all as specified and directed.

S&F in repair Tubular towel rail brass chromium plated 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair CP Towel Ring fixed with and including Chromium plated brass screws and cleats complete all as specified and directed.

S&F in repair 15mm bore Chromium plated Bib taps,long body, fancy type, cast copper alloy screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs stop valve/angle valve, bore of dia 15mm of Chromium plated fancy type cast copper alloy screwed down for iron pipe and fixed etc complete all as specified.

S&F in repairs Brass CP sink/basin mixer fancy type with swivel spout long neck for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

Supply only 15mm pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as spfd & directed.

S&F in repairs Stainless steel soap dish, any type fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified

S&F PVC connections 15 mm size with PTMT nuts of length 600mm long fixed in repairs all as spfd and as directed.

S&F in repair 20 mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed.

S&F in repairs Brass chromium plated shower rose min. 125mm size including shower arm of min. 30 cm length complete all as specified and directed.

Supply and fix in repairs CP brass Wall Mixer with provision for Overhead Shower with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges for 15mm dia pipe complete all as specified and directed.

Taking up or down Steel Tubing bore of pipe in 15mm and connections, and removal to store etc complete all as specified and directed.

Taking up or down Steel Tubing bore of pipe in 20mm and connections, and removal to store etc complete all as specified and directed.

Refixing old steel tubing and connections in new or old position bore of pipe 15/20mm (Walls, ceiling, floors, etc.) complete all as specified and directed.

S&F Steel Tubes Medium Grade Bore of tube in 15mm galavanised with all fitting laid in walls, ceiling or laid in floors etc complete all as specified and directed.

S&F Steel Tubes Medium Grade Bore of tube in 20mm galavanised with all fitting laid in walls, ceiling or laid in floors etc complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes 100mm, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

S&F Cast iron soil, waste and vent pipe of bore 100mm sand cast in any length with or without ears with lead joints fixed to wall complete all as specified and directed.

S&F Cast iron soil, waste and vent pipe of bore 100mm sand cast (except pipe) in any length with or without ears with lead joints fixed to wall complete all as specified and directed.

S&F in repairs Health Faucet (ABS Body) MS, Chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S & F in repair curtain rods, mild steel, chromium plated with brackets,stops, rollers etc fancy type as approved complete all as specified and directed.

Supply and fix 250 Ltr rotational moulded polyethylene water stotage tanks min. triple layered ( cylinderical vetrticle with closed top) hoisted & fixed in position including dismantlling old water tank, complete all as specified and directed.

Supply and fix 500 Ltr rotational moulded polyethylene water stotage tanks min. triple layered ( cylinderical vetrticle with closed top) hoisted & fixed in position including dismantling old water tank complete all as specified and directed.

S&F in 20 mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed.

S&F in repair 15mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed.

S&F in repair 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed.

S&F in repairs PVC acrylic toilet cabinet with shelves min. size 622mmx422mm with shutter and mirror complete all as specified and directed.

Demolition reinforced cement concrete in any description and in any position complete all as specified and directed.

M&L precast cement concrete type B-1, 1:2:4 set in C:M 1:6 in, cover slabs incl necessary formwork complete all as specified and directed

M & L mild steel TMT bars 8mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia complete all as specified and directed.

M&L 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L three coats of white wash on wall surfaces including prepration of new plastered surfaces complete all as specified and directed.

Roughening surfaces of old concrete floor by picking ,sweeping clean and washing down with water to remove dust etc.complete all as specified and directed.

M & L for 25mm thick Cement concrete type B-1,1:2:4 (20mm graded aggregate) as in levelling course etc. complete all as specified & directed.

M&L for Machine cut kota stone slab 12-16mm thick in riser of steps, skirting, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, in skirting over and including 10mm thick screed in CM 1:4 etc set complete all as specified and directed.

M&L for Chequered coloured cement concrete tiles 30cm x 30cm x 20 mm thick set, jointed and pointed in neat cement slurry with white cement and pigments in floor including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

Welded steel wire fabric weight not exc. 4kg/sqm supplied and fixed complete to wood or steel members complete all as specified and directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded all as spfd and as directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded all as spfd and as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each panels complete all as specified and directed.

S&F 150 mm Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F 300mm long Mild Steel sliding door bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts complete all as specified and directed.

S&F 100 mm Mild Steel barrel tower bolts, stove enamelled, black with bright bolts complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and gastenings and heavy brackets framing (beam, tee, angle channel or flat sections) (Fe-290 Gde E-165) inicluding distance pieces, cleats etc complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets,fittings etc. as specified and directed.

S&F false ceiling horizontal level regular grid 600 x 600mm form work using hot dip section and fixing tiles vinyl laminated MPL gypsum panels size 595 x 595 x 6-8mm thick after lamination, suspending the grid with grid hangers to roof truss/RCC slab complete all as specified and directed.

M&L for 6mm thick Plywood, grade BWR, type BB, fixed in ceiling and walling with screws to timber frame work complete all as sfd and directed.

M&L II nd class hard wood plain fillets square or rectangular in section cleansawn but bullnosed chamfared or rounded on one edge or face sectional area exc 3 sqcm and nexc 6 sqcm secured in nails complete all as specified and directed.

Dismantling of timber scantling 40 sqcm and over in section in any position for unframed works complete all as specified and directed.

M&L for 2nd class hard wood as in scantling clean sawn framed & fixed as in ceiling and walling wks, complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm under in section in any position, fixed with nails unframed work complete all as spfd & directed.

M&L for II nd class hard wood plain fillets square or rectangular in section clean sawn secured with nails sectional area exc 13 sqcm and n.exc 25 sqcm complete all as specified and directed

M&L for one coat of creasote oil to wooden surfaces new or old of any description including prepration of surfaces complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting of any guage/thickness in roof covering/wall clading complete all as specified and directed.

S&F 0.63 mm th galvanised corrugated mild steel sheeting with two corrugation side lap fixed with 'L' type or 'J' type or cranked hook bolts fixed to roof covering/cladding to wall complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L preparing old previously treated surfaces of steel surface as in corrugated/plain sheets as in roof covering /wall or other surfaces over 10 cm girth or width by cleaning straightening if any removing rust and making good where required and applying two coat of synthetic enamel paint on old steel surfaces complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc and making good disturbed surfaces of walls, floors etc. complete all as specified.

M&L point wiring with 1.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor cable in existing/new PVC concealed conduit /in PVC conduit on surface with zinc coated pressed steel terminal boxes with min thickness 1.2mm or heavy duty of PVC terminal boxes for mounting switch/sockets including 3mm thick plastic laminated hard glossy surface top sheet cover or heavy duty PVC surface sheet on all and brass screw and washer including unsheathed single core PVC insulated cable green in colour 1.5 Sqmm multistranded copper conductor as contineous earth wire and connecting to earth dolly complete all as specified and directed for one light /fan /bell point controlled by one way switch of 5/6 Amps.

All as per item No. 128 above but for one 3/5 pin socket outlet point on same board controlled by one way switch of 5 Amps.

~ditto~ all as per Item No. 128 above but for one 3/5 pin socket outlet point on independent board controlled by one way switch of 5 Amps

M&L power point wiring with 2.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper for conductor cable in existing/new PVC concealed conduit /in PVC conduit on surface with zink coated pressed steel terminal boxes with min thickness 1.2mm or heavy duty of PVC terminal boxes for mounting switch/sockets including 3mm thick plastic laminated hard glossy surface top sheet cover or heavy duty PVC surface sheet open recessed on all and brass screw and washers including unsheathed single core PVC insulated cable green in colour 2.5 Sqmm multistranded copper conductor cable as earth wire and connecting to earth dolly complete all as specified.

M&L point wiring with 1.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor FRLS cable in open/ surface/concealed with PVC conduit of suitable size, complete with all accessories/fitting, including heavy duty PVC/ABS terminal switch board floor mounted/flush type (depth not less than 45 mm) of suitable size (lengthX width) for mounting modular switches, Modular sockets, Modular regulators including PVC module top cover plate with frame of suitable size , brass screw and washer including unsheathed single core PVC insulated cable green in colour 1.5 Sqmm multistranded copper conductor as contineous earth wire and connecting to earth dolly complete all as specified for one light point / fan point controlled by one way switch of 5/6 Amps.

All as per item No. 132 above but for one 3/5 pin socket outlet point on same board controlled by one way switch of 5 Amps.

All as per item No. 132 above but for one 3/5 pin socket outlet point on independent board controlled by one way switch of 5 Amps.

M&L point wiring with 2.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor FRLS cable in open/ surface/concealed PVC conduit of suitable size, complete with all accessories/fitting, including heavy duty PVC/ABS terminal switch board floor mounted/flush type (depth not less than 45 mm) of suitable size (lengthX width) for mounting modular switches, Modular sockets, Modular regulators including PVC module top cover plate with frame of suitable size , brass screw and washer including unsheathed single core PVC insulated cable green in colour 2.5 Sqmm multistranded copper conductor as contineous earth wire and connecting to earth dolly complete all as specified for 15/16 amp socket outlet point controlled by one , one way switch of 15/16 Amps complete all as specified.

S&F switch piano flush button single pole one way 5 Amps complete all as specified.

S&F bell push flush button single pole one way 5 Amps complete all as specified.

S&F socket out let 3 pin 5/6 Amps flush type complete all as specified.

S&F switch piano flush button single pole one way 15 Amps complete all as specified.

S&F socket out let two in one 3 pin 5/6 Amps and 3 pin 15/16 Amps, flush type, with shutters & interlocking complete all as specified.

S&F Modular switch 1 module single pole one way 6 Amps, 240 volt complete all as specified.

S&F Modular switch 1 module single pole one way 16 Amps, 240 volt complete all as specified.

S&F Modular socket outletn, 2 module, 3 pin 5/6 Amps, 240 volt complete all as specified.

S&F Modular socket out let, 2 module, two in one 3 pin 5/6 Amps and 3 pin 15/16 amp , 240 volt, complete all as specified.

S&F stepped type electronic fan regulator modular type ,2 module,240 volt complete all as specified.

S&F lamp holder PVC/poly carbonated type with back plate suitable for pendants /angular /batten fittings complete all as specified.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified.

Supply and fixing in replacement LED lights fitting 1x 18/20W, 220V, AC decorative box type with driver, holder including LED tube light, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.

Supply and fixing in replacement LED lights fitting mirror type with high out put diffuser 2 feet,1x 10W, 220V, AC decorative box type with driver, holder including LED tube light, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.

S&F in replacement LED bulb 12 watts, 190-270V, 50 Hz AC supply, Natural white 6500K, with PF>0.9, B22 end cap complete all as specified.

S&F sheet metal enclosure for DB SPN 4 way with 200 Amps rated busbar 240 Volts, double door suitable for housing MCBs and isolators including taking down old unsv MCB DBs & MCBs complete all as specified.

S&F sheet metal enclosure for DB SPN 8 way with 200 Amp rated bus bar 240 Volts, double door suitable for housing MCBs and isolators including taking down old unserviceable DB with MCBs complete all as specified.

Supply and fixing MCB SP 6-32 Amps, 240volts 10KA 'B' curve type, in the MCB DB complete with connection, testing and commissioning all as specified.

Supply and fixing MCB SPN 32 Amps, 240volts 10KA 'C' curve type, in the MCB DB complete with connection, testing and commissioning all as specified.

M&L submain wiring with 2 runs of 6 sqmm and one runs of 6 sqmm copper cable multistranded drawn through existing surface /recessed steel/PVC conduit providing necessary clamp, screw, thimble and connected to MCB/DB box /main switches etc all as specified.

S&F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size form ceiling rose complete all as specified.

S&F 1x35 watt LED building security light fitting, with and including GI bracket made out of 1.5 mtr GI pipe bent to shape light grade of 25mm dia, bracket clamps nut bolts and washers etc and making electric connection with 3 core 1.5 sqmm PVC insulated copper conductor cable including taking down unserviceable one complete all as specified.

Labour only for taking down damaged aluminium strip of any type and size by unscrewing from roof sheet and wall of the building including air termination rod complete all as directed.

Supply & fix single pointed air termination aluminium rod 12mm dia, 300 mm long complete all as specified.

Supply & fix aluminium strip 25mm x 3.15mm with saddles and fixing screws etc for roof conductors and down conductors complete all as specified.

Labour only for taking down old galvanised iron (GI) strip of any type and size by unscrewing from earthing conductor complete all as directed.

Supply and fix galvanised iron (GI) strip 32mm x 6mm for ground conductor and buried in trenches complete all as specified.

Supply and fix test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw including taking down old gun metal complete all as specified.

Supply and lay pipe galvanized, “Medium class”, including fittings 50 mm (2”) dia complete all as specified.

Excavation in trenches in hard/dense soil n exc 1.5m wide and n exc1.5m in depth and getting out the soil including forming bottom surfaces to required level or slope for laying earth strip complete all as specified and as specified.

Returning filling in excavated soil in trenches including spreading, leveling watering and well ramming in 25mm thick layer complete all as specified and as specified.

Removal of surplus excavated soil to a distance exc50 m but not exc in 100 m and deposited wher directedat a leveln exc 50 m above the starting point complete all as specified.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, buried directly in ground (earth pit not less then 2.25 metres deep below ground level) with top edge of the plate not less then 1.5 metres below normal ground level, conneted to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised or iron protected by 40 mm bore GI pipe (medium grade) and connected to main switch board as directed including concrete pit in PCC (1:3:6) type C1 precast RCC (1:2:4) type B1 cover slab 40x40 Cm x 6Cm reinforced with 8 mm dia deformed bar @ 5 cm c/c with one handle for lifitting made out of 8 mm dia MS bar including funnle, wire mesh, 20 mm bore GI pipe (medium grade) for watering including charcoal and salt in alternative layers necessary excavation and earth work in any type of soil and testing complete all as shown on electrical plate No-3 of SSR part-I, 2009.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, buried directly in ground (earth pit not less then 2.25 metres deep below ground level) with top edge of the plate not less then 1.5 metres below normal ground level, conneted to galvanised iron earth strip 25x4 mm dia by means of bolts, nuts, cheek nuts and washers of galvanised or iron protected by 40 mm bore GI pipe (medium grade) and connected to main switch board as directed including concrete pit in PCC (1:3:6) type C1 precast RCC (1:2:4) type B1 cover slab 40x40 Cm x 6Cm reinforced with 8 mm dia deformed bar @ 5 cm c/c with one handle for lifitting made out of 8 mm dia MS bar, funnle, wire mesh, 20 mm bore GI pipe (medium grade) for watering including charcoal and salt in alternative layers necessary excavation and earth work in any type of soil and testing complete all as shown on electrical plate No-3 of SSR part-I, 2009.

M&L in replacement of switch socket board sheet 3mm thick plastic laminated hard gloosy surface sheet top cover with screws and washerss or haylam sheet for mounting switch, sockets and fan regulators incl taking down switch, socket and fan regulators by disconnecting all electric connections and re-fixing the same with connections complete all as specified in following approx sizes: (i) 8"x6" or (ii) 8"x8" or (iii) 12"x8" or (iv) 7"x4" or (v) 6"x4" or 10"x8"

Taking down ceiling fan from existing position, dismantling, overhauling and cleaning throughly, oiling /greasing and re- assemble after replacing split pins, check nuts, rubber seal etc and rehanging at same or new locations duly connected with new PVC three core flexible copper conductor cable of size 23/.0076, complete testing & specified. Note: Spare parts will be measured and paid separately under respective items as supply only as mentioned below.

M&L for taking out burnt copper winding from ceiling fan of 1200 mm size and rewinding with existing /same guage of super enammeled copper winding wire complete all as specified.

Supply only Ball bearing for ceiling fan after and including taking down old ball bearing complete all as specified.

Supply only capacitor 2.5 mfd±5%, 440 Volt, AC, 50Hz after removing old defective condensor complete all as specified.

Taking down exhaust fan of any size from existing position, dismantling, overhauling and cleaning throughly, oiling/greasing and re- assemble after replacing unsv parts etc and rehanging the same duly connected with new PVC three core flexible copper conductor cable of size 23/.0076, complete testing & specified. Note: Spare parts will be measured and paid separately under respective items as supply only as mentioned below.

M&L for taking out burnt copper winding from exhaust fan of any size/type and rewinding with existing /same guage of super enammeled copper wire complete all as specified.

Supply only 200/250mm sweep PVC body exhaust fan motor complete all as specified.

Supply only capacitor 1-1.5 mfd±5%, 440 VAC, 50Hz Suare shape suitable for PVC body exhaust fan 200/250mm sweep or suitable one after removing old defective capacitor complete in exhaust fan all as specified.

Supply only capacitor 3.15 mfd±5%, 440 Volt, AC, 50Hz or suitable one after removing old defective capacitor complete in exhaust fan all as specified.

Taking down flate-plate solar collector storage solar water heater of capacity 100LPD, dismantling Hot water and SS outer tank, pipe assembly, cleaning thoroughly with descaling liquid compound complete to ensure free and constant flow of water through outlet, repair of copper bracing for bonding of header and raiser making leak proof, reassembling the same after replacing unsv items i.e. heating element, thermostate, toughened glass, connection pipe with clamp etc. at existing location including necessary fasteners to ensure proper safety as reqd at site, repair/welding of MS structure for collector stand, testing and commissioning after re-installation at site complete all as specified and directed. Note: (i) Installed Solar water heater of INTERSOLAR Make. (ii) Spare parts (heating element, thermostate, toughened glass, connection pipe with clamp) shall be measured and paid separately.

Supply only heating element of 3.0 KW for solar water heater (as per sample ISI brand) complete all as specified and directed.

Supply only thermostate for 100LPD cap solar water heater.

Supply and fixing in replacement of flate-plate solar collector transparent cover to prevent heat loss and made with iron poor solar safety toughened glass, 4 mm thick with low iron, transmissivity upto 92% at near normal incidence glass as same as existing including rubber gaskets for base support complete all as specified..

Supply and fixing in replacement of flate-plate collector having absorber plate with copper tubes, thermal insulation with glass wool, glazing with transparent cover to prevent heat loss and made with iron poor solar safety toughened glass, 4 mm thick with low iron, transmissivity upto 92% at near normal incidence glass as same as existing.

Supply only SS heat exchanger / Hot water tank of cap 100 LPD with outer cladding & frames of SS/AL/GI complete all as specified.

S&F in rep of SS tank for 100LPD Solar water heater as existing complete all as specified.

Supply only Heavy duty nylon threaded flexible PVC/CPVC connection pipe 25 mm dia suitable for both hot & cold watrer supply of solar water heater complete all as specified and directed.

Supply only GI/brass adjustable scew clamp as per sample

Supply, laying and testing GI pipe medium grade 15 mm, ISI marked, with all fittings and fixed complete to wall and ceiling or laid on floors complete all as speficied.

Supply, laying and testing GI pipe medium grade 20 mm, ISI marked, with all fittings and fixed complete to wall and ceiling or laid on floors complete all as speficied.

Taking up or down steel tubing and connections, including cleaning for re-fixing and re-fixing the same at new or old locations by replacing worn out GI fittings complete all as specified and directed. Note: GI fittings as required shall be measured and paid separately under respective items as supply only as mentioned below.

Supply only Elbow 15mm

Supply only Tee 15x15x15mm

Supply only Socket 15 mm

Supply only Union 15mm

Supply only Reducer Socket 20/15 mm

Supply only Nipple 15 mm

Supply only Butterfly valve 15mm

Supply only Elbow 20mm

Supply only Tee 20x20x15mm

Supply only Socket 20 mm

Supply only Union 20mm

Supply only Nipple 20 mm

S&F float valve 15mm NB for SS tank

M&L sub main wiring with 2 run of 4 sqmm and one run of 4 sqmm Copper cable FRLS multistranded drawn in and including PVC conduit in surface/recessed providing necessary clamps, screws, thimbles and connected to MCB of solar water heater/DB box etc all as specified.

Fixing only brackets of angles or tess with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting etc. n exc 10 kg each brackets, conforming to Fe-290 Gde-E-165 or as existing complete all as specified.

Note : Tenderers may note that amount of credit Rs 86,525.71 will be deducted from the total amount arrived, at the time of Acceptance of contract.

M/S M K CONSTRUCTION (BID ID -3295115)

M/s J P Traders (BID ID -3296617)