REPAIR / REPLACEMENT OF EXTERNAL WATER SUPPLY RISING MAINS / DISTRIBUTION GI/DI/CI LINES, CONTROL VALVES, REPAIR TO SWIMMING POOL MACHINERY AND SEWAGE TREATMENT PLANTS AND OTHER ALLIED MISC E/M WORKS AT MIC and S UNDER GE(S) AHILYANAGAR

Amount

Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation, laying of pipe, cables or for shafts, wells cesspits,man holes, sluice valves etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and as directed.

Excavation in trenches not exc 1.50 m wide and exc 1.50 m but not exc 3m deep for foundation, laying of pipe, cables or for shafts, wells cesspits,man holes, sluice valves etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.

Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation, laying of pipe, cables or for shafts, wells cesspits,man holes, sluice valves etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in hard/ dense soil complete all as specified and as directed.

Excavation in trenches not exc 1.50 m wide and exc 1.50 m but not exc 3m deep for foundation, laying of pipe, cables or for shafts, wells cesspits,man holes, sluice valves etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in hard/ dense soil complete all as specified and as directed.

Returning, filling, in soil including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and as directed.

Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed.

M&L for cutting the existing bituminous road / PCC Hard Standing upto 75cm in depth, 60cm in width and getting out excavated materials, making good the damaged portion after laying of pipes by returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick and top 30cm with PCC 1:2:4 type B1 using 20mm graded stone aggregate from top of the road all as specified and as directed.

M&L for repairs / rectification of leakages of existing GI tubing 15mm bore, laid in trenches, floors or on wall, roof by replacing new fittings such as Union, Sockets, nipples, tees, elbows, reducers etc including threading, cutting, jointing, excavation and earthwork complete all as specified and as directed.

All as per serial item No 8 here-in-before but for 20mm bore.

All as per serial item No 8 here-in-before but for 25mm bore.

All as per serial item No 8 here-in-before but for 40mm bore.

All as per serial item No 8 here-in-before but for 50mm bore.

All as per serial item No 8 here-in-before but for 80mm bore.

All as per serial item No 8 here-in-before but for 100mm bore.

M&L for repairs / rectification of leakages of existing UPVC/CPVC pipe 15 mm bore, laid in trenches, floors or on wall, roof by replacing new fittings such as union, sockets, nipples, tees, elbows, reducers etc including threading, cutting, jointing complete all as specified and as directed.

All as per serial item No. 15 here-in-before but 20 mm bore pipe.

All as per serial item No. 15 here-in-before but 25 mm bore pipe.

All as per serial item No. 15 here-in-before but 40 mm bore pipe.

All as per serial item No. 15 here-in-before but 50 mm bore pipe.

M&L for UPVC pipes, 15 mm bore (Pressure rating 10 kgf/cm²) laid in trenches / floors or fixed to wall in any length with all UPVC fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete including dismantling/ taking out old pipe complete all as specified and as directed.

All as per serial item No. 20 here-in-before but 20 mm bore pipe.

All as per serial item No. 20 here-in-before but 25 mm bore pipe.

All as per serial item No. 20 here-in-before but 40 mm bore pipe.

All as per serial item No. 20 here-in-before but 50 mm bore pipe.

Taking up or down choked GI water pipes15 mm bore and fittings including proper cleaning by internal brushing, removing chocking and refixing / relaying in place, jointing, pressure testing and washing out complete all as specified and as directed.

All as per serial item No. 25 here-in-before but 20 mm bore pipe.

All as per serial item No. 25 here-in-before but 25 mm bore pipe.

All as per serial item No. 25 here-in-before but 40 mm bore pipe.

All as per serial item No. 25 here-in-before but 50 mm bore pipe.

All as per serial item No. 25 here-in-before but 80 mm bore pipe.

All as per serial item No. 25 here-in-before but 100 mm bore pipe.

M&L for GI tubing, medium grade, 15 mm bore laid in trenches / floors or fixed to wall in any length with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing complete including dismantling/ taking out old pipes all as specified and as directed.

All as per serial item No. 32 here-in-before but 20 mm bore pipe.

All as per serial item No. 32 here-in-before but 25 mm bore pipe.

All as per serial item No. 32 here-in-before but 40 mm bore pipe.

All as per serial item No. 32 here-in-before but 50 mm bore pipe.

All as per serial item No. 32 here-in-before but 80 mm bore pipe.

All as per serial item No. 32 here-in-before but 100 mm bore pipe.

S&F in repairs gun metal, globe or gate valves, 15 mm bore, ISI marked, screwed both ends suitable for GI tubing with side way operating GI lever handle complete all as specified and as directed.

All as per serial item No. 39 here-in-before but 20 mm bore

All as per serial item No. 39 here-in-before but 25 mm bore

All as per serial item No. 39 here-in-before but 40 mm bore

All as per serial item No. 39 here-in-before but 50 mm bore

Taking up CI/DI water mains 80 mm bore including all fittings with spigot and socket ends including burning out joints, removing lead and proper cleaning by internal brushing, removing chocking and refixing in the same positon including testing all as specified and as directed. Note : Run lead joints shall be measured and paid seperately.

All as per serial item No. 44 here-in-before but 100 mm bore pipe.

All as per serial item No. 44 here-in-before but 150 mm bore pipe.

All as per serial item No. 44 here-in-before but 200 mm bore pipe.

All as per serial item No. 44 here-in-before but 250 mm bore pipe.

All as per serial item No. 44 here-in-before but 300 mm bore pipe.

All as per serial item No. 44 here-in-before but 350 mm bore pipe.

M&L for laying, jointing ductile iron pipe, 80 mm bore with spigot and socket ends, centrifugally cast, class DI-K9, cement mortar lining with portland slag cement as per IS 455: 1989, metallic Zinc coating as per Annex A of IS-8329 with finishing layer of bituminous coating as per Annex C of IS 8329, suitable for rubber gasket joint, conforming to IS: 8329 : 2000, ISI marked, in any length laid in trenches, pressure testing, washing out complete including dismantling, taking out old corroded pipe line with all fittings complete all as specified and as directed.

All as per serial item No. 51 here-in-before but 100 mm bore pipe.

All as per serial item No. 51 here-in-before but 150 mm bore pipe.

All as per serial item No. 51 here-in-before but 200 mm bore pipe.

All as per serial item No. 51 here-in-before but 250 mm bore pipe.

All as per serial item No. 51 here-in-before but 300 mm bore pipe.

All as per serial item No. 51 here-in-before but 350 mm bore pipe.

M&L for drilling, tapping, cast iron / ductile iron water main ( any dia) in position for branch connection with straight plain brass ferrule of suitable size for 15mm bore branch connetion complete all as specified and as directed

All as per serial item No. 58 here-in-before but for 20mm bore pipe.

M&L for CI / DI fittings and specials such as Bends (any type, radius and angle), Tapers any type (straight, bend, increasing, decreasing or double socket etc.), Tee pieces single branch, "Y" junction, Double branch, Cross (all sockets or socket and spigot), Collars, Caps, Plugs, Connecting pieces one end flanged and other end socketed or spigot ends or all socketed / spigot ends etc upto 150 mm bore complete all as specified and as directed.

All as per serial item No. 60 here-in-before but for 200 to 300 mm bore all as specified and as directed.

Burning out lead joints in position including removing old lead for 80 mm bore pipe complete all as specified and as directed

All as per serial item No. 62 here-in-before but 100 mm bore pipe.

All as per serial item No. 62 here-in-before but 150 mm bore pipe.

All as per serial item No. 62 here-in-before but 200 mm bore pipe.

All as per serial item No. 62 here-in-before but 250 mm bore pipe.

All as per serial item No. 62 here-in-before but 300 mm bore pipe.

All as per serial item No. 62 here-in-before but 350 mm bore pipe.

M&L for run lead joint complete and pressure testing for 80 mm bore line complete all as specified and as directed

All as per serial item No. 69 here-in-before but 100 mm bore pipe.

All as per serial item No. 69 here-in-before but 150 mm bore pipe.

All as per serial item No. 69 here-in-before but 200 mm bore pipe.

All as per serial item No. 69 here-in-before but 250 mm bore pipe.

All as per serial item No. 69 here-in-before but 300 mm bore pipe.

All as per serial item No. 69 here-in-before but 350 mm bore pipe.

M&L for Styrene Butadiene Rubber Gasket (IS : 5382) joint suitable for 80 mm bore DI pipes with spigot and socket ends, Class K9 and pressure testing complete all as specified and as directed.

All as per serial item No. 76 here-in-before but 100 mm bore pipe.

All as per serial item No. 76 here-in-before but 150 mm bore pipe.

All as per serial item No. 76 here-in-before but 200 mm bore pipe.

All as per serial item No. 76 here-in-before but 250 mm bore pipe.

All as per serial item No. 76 here-in-before but 300 mm bore pipe.

All as per serial item No. 76 here-in-before but 350 mm bore pipe.

M&L for mechanical joints having 2 Nos CI / DI Sockets, 1No CI / DI Collar and 2 Nos Styrene Butadiene Rubber Gaskets alongwith nuts, bolts, washers , gaskets etc. for 80mm bore including cutting CI / DI pipe and reducing to required length for insertion of mechanical joint in position complete all as specified and as directed.

All as per serial item No. 83 here-in-before but 100 mm bore pipe.

All as per serial item No. 83 here-in-before but 150 mm bore pipe.

All as per serial item No. 83 here-in-before but 200 mm bore pipe.

All as per serial item No. 83 here-in-before but 250 mm bore pipe.

All as per serial item No. 83 here-in-before but 300 mm bore pipe.

All as per serial item No. 83 here-in-before but 350 mm bore pipe.

M&L for taking out sluice valves, 80mm bore, refacing, regrinding as reqd including taking apart and reassembling, refixing, replacing nuts, bolts, washers and replacement of rubber gasket, gland, packing, brass check nuts complete all as specified and as directed.

All as per serial item No. 90 here-in-before but 100 mm bore

All as per serial item No. 90 here-in-before but 150 mm bore

All as per serial item No. 90 here-in-before but 200 mm bore

All as per serial item No. 90 here-in-before but 250 mm bore

All as per serial item No. 90 here-in-before but 300 mm bore

M&L for taking out old gland and nut bolts from existing sluice valves, 80mm bore and replacement of gland, packing including taking apart and reassembling, refixing, replacing Nuts, bolts, washers complete all as specified and as directed.

All as per serial item No. 96 here-in-before but 100 mm bore

All as per serial item No. 96 here-in-before but 150 mm bore

All as per serial item No. 96 here-in-before but 200 mm bore

All as per serial item No. 96 here-in-before but 250 mm bore

All as per serial item No. 96 here-in-before but 300 mm bore

M&L for sluice valve, 80mm bore, cast iron, long body, both ends flanged as per IS-14846 and drilled with stainless steel spindle iron wheel head and as per pressure rating PN 1.6, Class I, ISI Marked alongwith nuts, bolts, washers , gaskets etc. including dismantling and taking out sluice valve from valve chamber / trenches complete all as specified and as directed.

All as per serial item No. 102 here-in-before but 100 mm bore

All as per serial item No. 102 here-in-before but 150 mm bore

All as per serial item No. 102 here-in-before but 200 mm bore

All as per serial item No. 102 here-in-before but 250 mm bore

S&F rubber lined non return valve ( Ball type) cast iron body, flanged ends, 100mm bore including neophrene ball and by pass arrangements complete including suitable flanges, nuts, bolts, washers and rubbber gaskets including dismantling and taking down old unserviceable non return vave all as specified and as directed.

All as per serial item No. 107 here-in-before but 150 mm bore

All as per serial item No. 107 here-in-before but 200 mm bore

S&F cast iron body ball type foot valve flanged of 80mm bore size, including suitable flanges, nuts, bolts, washers and rubbber gaskets including dismantling and taking down old unserviceable foot valve all as specified & as directed.

All as per serial item No. 110 here-in-before but 100 mm bore

All as per serial item No. 110 here-in-before but 150 mm bore

All as per serial item No. 110 here-in-before but 200 mm bore

All as per serial item No. 110 here-in-before but 250 mm bore

S&F CI/DI Strainer valve, 100 mm bore complete including taking down old unserviceable stainer valve all as specified and as directed.

All as per serial item No. 110 here-in-before but 150 mm bore

All as per serial item No. 110 here-in-before but 200 mm bore

M&L for construction of valve pit chamber internal dimension 1100mmx1100mmx1100mm with and including PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) for foundation, 23 cm thick brick wall in cement mortar 1:4, 15 mm thick rendering all around the brick work in cement mortar 1:6, 75 mm thick PCC (1:2:4) type B-1 coping using 20mm graded stone aggregate including necessary form work including 2 mm thick MS top sheet cover with locking arrangements, Mild Steel frame made out of 40x40x6 mm angle iron including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primer as finishing coat tosteel surfaces including demolition of existing valve chamber and clearing the debris complete all as specified and directed.

All as per serial item No 118 here-in-before but internal dimension 900x900x900mm

Taking LT shutdown, dismantling and removing the submersible suction sweeper 2HP, 415 V, 2750RPM, Make Modi, Model B-200 Pump set from existing position, Shifting to authorized workshop for the repair work, removing the burnt winding, cleaning rotor / stator slots, re-winding the motor with super enameled copper wire of the size equivalent to the original winding including insulated packing materials, Varnishing, Heating, Drying etc, replacing coupling,replacing the bearings, reassembling and installing back at it's original position. Testing and commissioning on full load for 8 hrs continuous running all as specified & as directed.

Supply only submersible flexible cable with multistranded copper conductor, PVC insulated and overall PVC sheathed, 3 core, 1100 Volts grade, 6.0 Sqmm all as specified & as directed.

Supply only nylon braided UPVC flexible hose pipe, heavy grade, 50mm OD with two nose clips all as specified & as directed.

Supply only nylon braided UPVC flexible hose pipe, heavy grade, 40mm OD with two nose clips all as specified & as directed.

Supply only nylon rope 12 mm dia, best quality for operation of suction sweeper all as specified & as directed.

Supply only nylon brushes (700 x 100mm) as per and suitable for submersible suction sweeper , 2HP all as specified & as directed. Make: Modi, Model B-200, best quality.

S&F in repair/replacement, star coupling, heavy duty, Styrene Butadiene Rubber suitable for 30 HP pump or motor all as specified & as directed.

Taking LT shutdown, dismantle and remove the 30 HP electric motor of the mono block / coupled / Mud pump set from existing foundation / position, shifting to authorized workshop for the repair work, removing the burnt winding, cleaning rotor / stator slots, re-winding the motor with super enameled copper wire of the size equivalent to the original winding including insulated packing materials, varnishing, heating, drying etc, replacing star bush coupling,replacing the bearings, reassembling and installing back at it's original position, aligning, testing and commissioning on full load for 8 hrs continuous running all as specified and as directed.

S&F in repair/replacement, CI impeller for 30 HP pump all as specified and as directed

S&F in repair/replacement, bearing 6309 for 30 HP pump all as specified and as directed

S&F in repair/replacement, bearing end plate for 30 HP pump all as specified and as directed

S&F in repair/replacement, MS shaft for 30 HP pump all as specified and as directed

S&F in repair/replacement, MS coupling for 30 HP pump all as specified and as directed

S&F in repair/replacement, seal for 30 HP pump all as specified and as directed

S&F in repair/replacement, motor fan for 30 HP pump all as specified and as directed

S&F in repair/replacement, bush for 30 HP pump all as specified and as directed

Taking LT shutdown, dismantle and remove the 5.5 kW/7.5 HP motor blower set Max flow capacity 210 m³/hr, from existing foundation / position, shifting to authorized workshop for the repair work, removing the burnt winding, cleaning rotor / stator slots, re-winding the motor/blower with super enameled copper wire of the size equivalent to the original winding including insulated packing materials, varnishing, heating, drying etc, replacing old gear oil, replacing the bearings, Air filters etc. reassembling and installing back at it's original position, aligning, testing and commissioning on full load for 8 hrs continuous running all as specified and as directed.

M&L for greasing and Oiling for any type and Capacity Pump/Motor/Blower and Machine etc for smooth running and functioning all as specified and directed

Topping up / replacement of Gear oil of Blower upto the required level in any type complete all as specified and as directed. Note : Gear oil brought by the contractor at site must be in seal packed in drum having ISI mark as per IS-335 / 1983. Make : HP GEAR OIL EP90/ SHELL SPIRAX S2 G90/ CASTROL HYPOY 90EP

S&F in repair/replacement, V Belt for blower set 7.5/5/3 HP pump or motor, all as specified & as directed.

M&L for suction sweeping of swimming pool of size 21 mtr x 50mtr with skilled persons and labour including assembling and electrically connecting of suction sweeping mechanism, connecting of inlet and outlet hoses, deep cleaning of wall and floor by circulating the swimming pool water at the same time through filter media of filter tank for removing entire dirt, sand, algae and removing all floating particles with help of nets and recirculate clean water to the pool and adding necessary chemicals all as per directed by Engr-in-Charge. Note :- Chemicals shall be measured and paid separately under respective items.

Labour only for Emptying the swimming pool (L - 50M, W - 21M, Shallow end D - 1M and Deep end D - 1.8m), Diving pool (L - 50M, W - 21M, D - 4.8M), including Scum channel, Connecting channel, Supply duct etc. Take out the grills of man holes, Remove all mosses, algae, dirt, deposits, sediments and sludge. Scrub and clean wall / floor / scum channel tiles with nylon wire brush, remove dirty water with sludge machines / industrial vacuum cleaners and disposal of the same to a safe distance. Wash entire swimming / Diving pool, including Scum channel, Connecting channel, Supply duct etc with lime soda ash solution / hydrochloride acid. Sterilize the complete internal surface using Liquid Chlorine. Wash with fresh water, drying up, complete all as specified and directed.

Labour only for Emptying the balancing tank and Water Cascade, Removing all mosses, algae, dirt, deposits, sediments and sludge, scrubbing of internal surface with steel wire brush and removal of dirty water with sludge machines / industrial vacuum cleaners and disposal of the same to a safe distance including Sterilizing the complete internal surface of the tank / cascade by using ISI mark Gd I bleaching powder / Liquid Chlorine, wash with fresh water, drying up, applying one coat of anti-fungal paint on internal surface and applying one coat of exterior weather coat cement paint on external surface complete all as specified and directed.

Labour only for filling the swimming pool / Diving pool / balancing tank with fresh water, operating the filter media pump set, carrying out back washing of filter media, aerating by operating air blower, Suction sweeping of swimming pool at various stages of filling with water after adding chemicals, carryout the filtration of pool water for 8Hrs continuously, carryout PH test and ppm test of pool water complete all as specified and directed.

Supply only Soda Ash all as specified and directed.

Supply only Alum ferric Grade I with test certificate all as specified and directed. Make : Almighty/ Vikram India Chemicals

Supply only Copper Sulphate all as specified and directed.

Supply of bleaching powder grade-I, ISI marked packed in 25 Kg Bag or as approved complete all as specified and directed by Engr in Charge

Supply only ammonia solution for checking of chlorine gas leakages and plants in 500ml bottle. all as specified and directed. Make : NICE/Glaxo.

Supply only water testing kit including litmas papers and chemical. all as specified and directed.

M&L for construction of valve pit/chamber of Internal dimensions 900 mm x 900 mm x 900 mm, using PCC 1:4:8, type D-2, using 40mm graded stone aggregates for foundation, 23 cm thick, brick wall built in cement mortar (1:4) ,15 mm thick rendering all around the brick work in cement mortar (1:6), 75 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregates in coping including necessary form work, 3 coats of white wash on rendered surfaces and on coping, 2 mm thick mild steel top sheet cover with frame made out of 40x40x6 mm angle iron, locking arrangement, including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primer including demolition of existing valve chamber and clearing the debris complete all as specified and as directed.

Taking out old unserviceable MCCB TP/TPN/ four pole from existing LT panel board and S&F in repair/replacement Same of 63 amps with breaking capacity 16 KA at 415 volt 50 Hz AC supply, ( Ics = 100% Icu), including necessary modification in panel board if required to fix the MCCB complete with replacement of incoming and out going cable connection with lugs, aluminium conductor cable of proper size, nuts bolts all as directed.replacement of burnt lugs and wire/cable pieces etc as required at site all as specified and as directed.

All as per serial item No 151 but 4 pole, 100 amps capacity, 25 KA.

All as per serial item No 151 but 3 pole, 125 amps capacity, 36 KA.

S&F in repair/replacement, Illuminated Push Button assembly with Wire harness (Red Green colour) of existing size and shape complete all as specified and as directed. Make : L&T/ Havells/AE

S&F in repair/replacement, pressure gauge, stem with dual dial type, 0 - 7Kg / Cm² and 0 - 100 Lb / Sq inch all as specified and as directed.

Dismantling old LT feeder piller on existing foundation and supply installing commissioning & testing in replacement LT feeder pillar panel board factory made, indoor, cubical type, vermin proof, dust proof, water proof made out of 3.15 mm thick CRCA sheetand angle iron frame of size 50x50x6 mm inside depth not less than 50 cm and size suitable to accomodate the following accessories with insulated TPN Copper busbar of rating not less than 1.5 times the rated capacity of the incomer MCCB. both side openable (front & back) with locking arrangement duly painted with coat of synthetic enamel paint over a coat of red oxide primer both internally and externally and connecting with cable with lugs including internal wiring with copper cable of suitable size using lugs compressing the following accessories all as directed.

(Notes : (i) The rate quoted shall include for earth work & excavation for angle iron frame for foundation of panel board upto 0.50 m below GL in any type of soil & PCC (1:4:8), D2 filling in foundation the ground clearance of panel board shall be 0.40 m GL to the bottom of panel board and Copper bus bar 400 Amps duly colour sleeved mounted on epoxy insulators-01 set. (ii)Panel board shall be approved by CPRI and certificate to be produced and to be submitted to AGE E/M. Incoming :- (a) MCCB 250 amps, 4 pole, 36 KA with thermal magnetic release - 01 No (b) Manual Change over Switch 200 Amps 4 pole extended type - 01 No (c) Multifunction Digital square type intelligent panel meter to measure voltage, current, frequency & Power factor - 01 No Outgoing :- (a) MCCB 4 Pole 125 Amps, 25 KA - 02 Nos (b) Fully automatic Star Delta Starter suitable starter for 50 HP pump set - 02 Nos (c) Automatic Street Light controller with connecting accessories - 01 Set

S&F in repairs, single phase DOL starter and all components suitable for 1.5/ 3/ 5HP submersible pump set having relay range 06-10 Amps or as per existingall as specified and as directed.

S&F in repairs, three phase DOL starter and all components suitable for 1.5/ 3/ 5 HP submersible pump set having relay range 11- 18 Amps or as per existingall as specified and as directed.

S&F in repairs, three phase DOL starter and all components suitable for 10 HP motor, having relay range 13- 21 Amps or as per existing all as specified and as directed.

S&F in repairs, three phase DOL starter and all components suitable for 30 HP motor, having relay range as per existing all as specified and as directed.

S&F in repair/replacement, Single phase/Three phase preventer suitable for Fully automatic Star / Delta starter or Direct - on - Line starter all as specified and directed.

S&F in repairs, 3 pole power contactors, TYPE -MNX -70 conforming to IS suitable for Amp rating 70 Amps (MNX70) fixed in existing starter complete all as specified and as directed.

S&F in repairs, spare contact kit and spare coil conforming to IS suitable for ML-4 starter complete all as specified and as directed.

S&F in repairs, spare contact kit and spare coil conforming to IS suitable for ML-6 starter complete all as specified and as directed.

S&F 3 pole power contactor ML-3 TP 40 Amps capacity suitable for operation on 415 Volts 50 Hz, AC supply complete including taking out old unserviceable power contactor from panel board all as specified and as directed.

S&F 3 pole power contactor ML-4 TP 70 Amps capacity suitable for operation on 415 Volts 50 Hz, AC supply complete including taking out old unserviceable pole power contactor from panel board all as specified and as directed.

S&F in repairs, spare contact Kit TYPE -ML 4, fixed in existing starter complete all as specified and as directed.

S&F in repairs, spare contact Kit TYPE -ML 6, fixed in existing starter complete all as specified and as directed.

S&F in repairs, spare coil TYPE -ML 4, fixed in existing FASD starter complete all as specified and as directed.

S&F in repairs, spare coil TYPE -ML 6, fixed in existing FASD starter complete all as specified and as directed.

S&F in repairs, Thermal Overload Relays TYPE -ML 2/3, fixed in existing starter complete all as specified and as directed.

S&F in repairs, MCB 3 pole 100 Amps, 415 Volts, 50 Hz AC supply system all as specified and as directed.

Taking LT shutdown, dismantle and remove the 10 HP electric motor of the mono block / coupled / Mud pump set from existing foundation / position, shifting to authorized workshop for the repair work, removing the burnt winding, cleaning rotor / stator slots, re-winding the motor with super enameled copper wire of the size equivalent to the original winding including insulated packing materials, varnishing, heating, drying etc, replacing star bush coupling,replacing the bearings, reassembling and installing back at it's original position, aligning, testing and commissioning on full load for 8 hrs continuous running all as specified and as directed. Note :- This job include drain out sewage water from sump through honey sucking machine

All as per serial item No. 175 but 05 HP

All as per serial item No. 175 but 03 HP

S&F in repair/replacement, rotor for 10 HP pump all as specified and as directed

S&F in repair/replacement, bearing for 10 HP pump all as specified and as directed

S&F in repair/replacement, bearing end plate for 10 HP pump all as specified and as directed

S&F in repair/replacement, MS shaft for 10 HP pump all as specified and as directed

S&F in repair/replacement, stator for 10 HP pump all as specified and as directed

S&F in repair/replacement, seal for 10 HP pump all as specified and as directed

S&F in repair/replacement, motor fan for 10 HP pump all as specified and as directed

S&F in repair/replacement, bush for 10 HP pump all as specified and as directed

S&F in repair/replacement, rotor for 05 HP pump all as specified and as directed

S&F in repair/replacement, bearing for 05 HP pump all as specified and as directed

S&F in repair/replacement, bearing end plate for 05 HP pump all as specified and as directed

S&F in repair/replacement, MS shaft for 05 HP pump all as specified and as directed

S&F in repair/replacement, stator for 05 HP pump all as specified and as directed

S&F in repair/replacement, seal for 05 HP pump all as specified and as directed

S&F in repair/replacement, motor fan for 05 HP pump all as specified and as directed

S&F in repair/replacement, bush for 05 HP pump all as specified and as directed

S&F in repair/replacement, rotor for 03 HP pump all as specified and as directed

S&F in repair/replacement, bearing for 03 HP pump all as specified and as directed

S&F in repair/replacement, bearing end plate for 03 HP pump all as specified and as directed

S&F in repair/replacement, MS shaft for 03 HP pump all as specified and as directed

S&F in repair/replacement, stator for 03 HP pump all as specified and as directed

S&F in repair/replacement, seal for 03 HP pump all as specified and as directed

S&F in repair/replacement, motor fan for 03 HP pump all as specified and as directed

S&F in repair/replacement, bush for 03 HP pump all as specified and as directed

Taking LT shutdown, dismantle and remove the 5 HP motor blower set Max flow capacity 210 m³/hr, from existing foundation / position, shifting to authorized workshop for the repair work, removing the burnt winding, cleaning rotor / stator slots, re-winding the motor/blower with super enameled copper wire of the size equivalent to the original winding including insulated packing materials, varnishing, heating, drying etc, replacing old gear oil, replacing the bearings, Air filters etc. reassembling and installing back at it's original position, aligning, testing and commissioning on full load for 8 hrs continuous running all as specified and as directed.

All as per serial item No 202 but for 3 HP Blower Set, Max flow capacity 150 m³/hr

M&L for taking LT shutdown, dismantle and remove the 5 HP Submersible Pump set, from existing foundation / position, shifting to authorized workshop for the repair work, removing the burnt winding, cleaning rotor / stator slots, re-winding the motor/blower with super enameled copper wire of the size equivalent to the original winding including insulated packing materials, varnishing, heating, drying etc, replacing old gear oil, replacing the bearings etc. reassembling and installing back at it's original position, aligning, testing and commissioning on full load for 8 hrs continuous running all as specified and as directed.

All as per serial item No 204 but for Sludge pump set 1 HP capacity.

All as per serial item No 204 but for feed pump set 1 HP capacity.

M&L for taking LT shutdown, dismantle and remove the screw press sludge machine set from existing foundation / position, shifting to authorized workshop for the repair work, removing the plates, clean and fix with new if any plate and accessories break or burnt, complete greasing, oiling for smooth functioning. After complete the repair work, refix and re-position the machine with all connection of pipes and accessories complete all as specified and as directed.

Cleaning of Areation Tank, Tube Settling tank, Chlorination tank and Cleaning of lamina box plates . Remove of all sludges and mud completely from given tanks using honey sucking machine for 165 KLD STP all as specified and as directed.

All as per serial item No 208 but for 15 KLD STP

Supply only bio-culture suitable for sewage treatment plant and develop bio-culture till making of sludge in sludge bag feed pump all as specified and as directed.

Take Water Sample (Raw Water And Treated Water) form existing STP 160 KLD, sample will be submit in govt lab " Maharashtra State Public Health Services. State Public Health Laboratory, Pune " & Produce test report every month as per given below parameter. INLET PARAMETER (a) pH : 7.5 (b) BOD : 250 mg/l (c) COD : 450 mg/l (d) Suspended Solids : 200 mg/l (e) Oil & Grease : 20 mg/l PARAMETER (a) pH : 6.0-9.0 (b) 3 days BOD @ 27deg C : <100 mg/l (c) COD : <250 mg/l (d) Suspended Solids : <50 mg/l (e) Oil & Grease : <10 mg/l (f) Res Chlorine : > 1.0 mg/l (g) E-Coli : <1000 counts/100 ml

All as per serial item No 211 for 15 KLD STP

Supply only moving bed Biofilm Reactor (MBBR) to cover the higher surface area size 22 mm X 13 mm thickness 1.5mm, ranging from 200-500 m2/m3 all as specified and as directed.

S&F in repair/replacement, 3 phase DOL starter and all components suitable for 5 HP submersible pump set Make Havells, CG, L&T.

S&F in repair/replacement, 3 phase DOL starter and all components suitable for 1.5/3 HP submersible pump set (Make Havells, CG, L&T).

S&F in repair/replacement, over load relay for 3/5/10/25/30 HP motor as per existing capacity all as per specified and as directed.

S&F in repair/replacement, fully automatic Star / Delta starter in sheet metal enclosure with Single Phase/Three phase Protection feature (Motor Rating AC - 3 Duty, 415V, 50Hz, 3Ph) suitable for 10 HP pumpset having relay range 09-15 Amps all as specified and as directed.. Make: Schneider / L&T

Supply only Cationic polyelectrolyte liquid 12% chlorine all as specified and directed. Make : As approved by E-in-Cs Branch

Supply only Sodium hypochloride liquid 12% chlorine all as specified and directed. Make : As approved by E-in-Cs Branch

Supply only MIRA 71 powder for cleaning purpose installations all as specified and directed. (Note : Contractor will provide company seal packed 100 gm packet)

M&L for UPVC PIPES 100 mm bore (Pressure rating 10 kgf/cm²) laid in trenches / floors or fixed to wall in any length with screwed and socket joints together with all UPVC fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, Washing out complete including dismantling, taking out old pipe complete all as specified and as directed.

Cleaning of area around installations including cutting and dressing of the existing vegetation (trees /bushes /plants /grass, etc) of all type and all sizes wherever required for the clear approch to the installation and the work alignment of area complete all as specified and as directed.

M&L in repair/replacement for earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to the GI strip 32 x 6mm, by means nut bolt, nuts, check nuts and washer of the GI Earth wire protected by provision of GI light grade pipe 15 mm, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, taste point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork in hard soil, disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 complete all as specified and as directed.

M/s. Shahabad Enterprises (BID ID -3485297)

BHAVIN INFRA (BID ID -3486432)

Ms. S.K. ASSOCIATES (BID ID -3486079)

Mangesh Murlidhar Darwade (BID ID -3486462)