Loading
Loading…
Loading…
Tender Value
₹28.2 L
EMD Value
₹56,400
Closing Date
16 Oct 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
S AND T
45 conditions · 7 needing a document upload
A copy of certificate stating that they are not liable to be disqualified and all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as per Annexure V. In addition to Annexure-V, in case of other than Company/Proprietary firm, Annexure-V(A) shall also be submitted by the each member of a Partnership Firm/Joint Venture (JV)/Hindu Undivided Family (HUF)/Limited Liability Partnership (LLP) etc. as the case may be. Non submission of a copy of certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he are/is qualifying the Qualifying Criteria mentioned in the Tender Document.
Mandate form containing PAN No. should be uploaded.
The Tenderer must go through the IR GCC- 2022 available in the documents section and submit the Documents regarding constitution of the firm viz.(i) Proprietorship affidavit/ declaration, Partnership Firm/Company/Joint Venture (JV)/Registered Society/Registered Trust, MOA (Memorandum of Association)/AOA(Articles of Association) of the company; and (ii)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors)in favour of the individual to sign the tender on behalf of the company must be submitted by the Tenderer etc. In absence of such documents the tender shall be treated as having been submitted by the individual who has signed the tender. Besides the above the tenderer also has to submit a declaration regarding blacklisted/ not blacklisted
As per GCC-2022(i)The tenderer shall clearly specify whether the tender is submitted on his own(Proprietary Firm)or on behalf of a Partnership Firm/Company/Joint Venture (JV)/Registered Society/Registered Trust/HUF etc. The tenderer(s)shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be(ii)Following documents shall be submitted by the tenderer: a)Sole Proprietorship Firm:(i)An undertaking that he is not blacklisted or debarred by Railways or any other Ministry/Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was/is a partner/member. Concealment/wrong information in regard to above shall make the contract liable for determination under Clause 62 of the GCC of Contract(b)HUF:(i)A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF.(ii)An undertaking that the HUF is not blacklisted or debarred by Railways or any other Ministry/Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which HUF was/is a partner/member. Concealment/wrong information in regard to above shall make the contract liable for determination under Clause 62 of the GCC.(C)For partnership firm The Tenderer shall submit -(i)A notarized copy of partnership deed.(ii)A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm.(iii)An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry/ Department of the Govt. of India from participation in tenders/contracts as on the date of opening of bids, either in their individual capacity or in any firm in which they were / are partners. Concealment /wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.(D)Company registered under Companies Act 2013:(i)The copies of MOA(Memorandum of Association) / AOA (Articles of Association) of the company. (ii)A copy of Certificate of Incorporation.(iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.(iv)An undertaking that the Company is not blacklisted or debarred by Railways or any other Ministry/Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which the Company was/is a partner/member. Concealment/wrong information in regard to above shall make the contract able for determination underClause62GCC(e)Registered Society & Registered Trust and LLP-Tenderer shall submit documents as per Clause 14 of GCC-2022.
(I)If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture /Registered Company etc., then the tender shall be treated a s having been submitted by the individual who has signed the tender.(II)After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm/ Partnership Firm / Registered Company/ Registered Trust / Registered Society / HUF etc. shall be neither asked nor considered, if submitted. Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office file set c. will be taken for consideration of the tender, if no such mention is available in tender offer submitted. (III)A tender from JV / Partnership firm etc. shall be considered only where permissible as per the tender conditions. (IV)The Railway will not be bound by any change in the composition of the firm made subsequent to the submission of tender. Railway may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor.
The tenderer whether his own(Proprietary Firm)or on behalf of a Partnership Firm/Company/Joint Venture (JV)/Registered Society/Registered Trust/HUF etc shall also submit all documents as per instructions given in the General Conditions of contract- 2022(Second Sheet) wherever applicable. Tenderer are thus advised to read the same before submitting their bids and upload the required documents.
A declaration regarding engagement/employment/ partnership etc. (or Not) of retired Railway employees should be uploaded by the Tenderer.
The list of personnel/organization on hand and proposed to be engaged for the tendered work. Similarly list of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work.
The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as per Annexure V. In addition to Annexure-V, in case of other than Company/Proprietary firm, Annexure-V(A) shall also be submitted by the each member of a Partnership Firm/Joint Venture (JV)/Hindu Undivided Family (HUF)/Limited Liability Partnership (LLP) etc. as the case may be. Non submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents (if any) duly self attested. NOTE- Format of Annexure V is also enclosed in document Tab for references.
For Sole Proprietorship Firm: (i) An undertaking that he is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
For Partnership Firm :-(i) A notarized copy of partnership deed. (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of opening of bids, either in their individual capacity or in any firm in which they were / are partners. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
For Company registered under Companies Act-2013 :- (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.All other documents in terms Para 10 of the Tender Form (Second Sheet of the GCC) (iv) An undertaking that the Company is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which the Company was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
Registered Society & Registered Trust:(i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet of the GCC)
LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet of the GCC)
HUF- A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) An undertaking that the HUF is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which HUF was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
An undertaking by all partners/members of JV / HUF/proprietor etc, of the partnership firm or JV or HUF or Proprietorship Firm etc. as the case may be that they are not blacklisted or debarred by Railways or any other Ministry/ Department of the Govt. of India from participation in tenders/contracts as on the date of opening of bids, either in their individual capacity or in any firm in which they were / are partners/ members/Proprietors/HUF etc. as the case may be is to be submitted.
Clarification of Bids: To assist in the examination, evaluation & comparison and prequalification of the Tender, the Railway may, at its discretion, ask any Bidder for a clarification of its Bid. Any clarification submitted by a Bidder that is not in response to a request by the Railway shall not be entertained or considered. The Railway request for clarification and the response of the bidder in this regard shall be in writing. However, if a Bidder does not provide clarification of its bid by the date and time communicated in the Railway request for clarification, the bid shall be evaluated as per the documents submitted along with the bid.
The tenderer whether sole proprietor / a company or a partnership firm / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate.
The Tender Form(First Sheet) available in the document section must be filled in by the tenderer and uploaded duly filled in.
The Tenderer must go through the Tender Form(Second Sheet) thoroughly and submit all the required documents even if not clearly mentioned in the Conditions or compliances in the Tender document.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Letter of Credit as Mode of Payment in Works Tender or Service Tender has been introduced as per Rly Board's letter no. 2018/CE-I/CT/9, New Delhi, dtd: 04.06.2018. The details in this regard are given in Special conditions of contract which may be seen by the tenderers before bidding in IREPS Portal.
Tenderers(s) should read carefully the instructions given in the Tender Form (Second Sheet) of Indian Railway Standard General Conditions of Contract-2022 and submit all the required documents in compliance to the Instructions containing in the said Tender Form (Second Sheet). A copy of the Indian Railway Standard General Conditions of Contract(GCC)- 2022 is available in the document section.
No Technical and Financial credentials are required for tenders having value up to Rs 50 lakh.
Balance work for S&T works in connection with controlling of takeoff point of MBR siding from Karampada station.
ST-CKP-OT-26-27-101~SER
ST-CKP-OT-26-27-101
Open
Works - General
3 Months
West Singhbhum, Jharkhand
₹0
₹56,400
22 Sept 2026
22 Sept 2026
2 Oct 2026
43 items across 2 schedules · ₹28,19,271.69 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Modification of Control- cum-Indication-panel as per RDSO Specification No. RDSO/SPN/186/2004 and as per approved front plate diagram with supply of required No. of dominos and push button/switches are to be supplied additionally in the same cost by the contractor to the Railway shall be inspected by the representative of Sr.DSTE/CKP | Job | 1.00 | 40,824.81 | 40,824.81 |
| 2 | Excavation of trench in all kinds of soils including soft rocky area and clearing of roots of trees, rocks, bushes, ballast & reconditioning etc. including bailing out water and disposal of extra soil including back filling with excavated earth and ramming o f trenches a f t e r cable laying f o r t h e following depths and widths as specified in Technical Circular No. 2 of 1988 & 01/2010 issued by CSTE/SER. Note:- In case, trenches are other than prescribed depth & width, Proportionate payment shall be released. (i) Depth 1.2 meter, Width 0.5 meter. | Kilometre | 5.00 | 78,680.04 | 3,93,400.2 |
| 3 | Laying of S&T Cables (Signal/Quad/Power) in the excavated trench t o D r a w i n g No. CON/SK/T/5. Transportation and supply of 'U' clamps, anchoring of cable at every 10 mtrs interval with 'U' clamp on trench to Drawing No. CSTE/CON/CABLES/81. Transportation supply and placing o f cable demarcating lead belt to Drawing No. CON/SK/T/6 punched at an interval of 30 mtrs. and wrapped round each cable throughout the cable route and also at every track/Road/ platform crossing as above specified i n Technical Circular No. 2/1988 & 01/2010 issued by CSTE/SER and guarding the cables collecting empty drums w ith left over cable and return to the stores of stock holder. NB: All S&T cables are terminated as per instruction of Rly Site Engineer-in-Charge. | Kilometre | 23.00 | 19,877.1 | 4,57,173.3 |
| 4 | Transportation of cables in rolls with or without wooden drums (S&T Cables) from central store/concerned store to the site of works. | Drum-Km | 23.00 | 2,286.84 | 52,597.32 |
| 5 | Installation, Wiring, Testing, Validation and commissioning of Remote terminal unit with 128 Digital & 16 Analog inputs with modem as per Specification No.IRS:S-99/2006 (Amdt-3) or latest. | Set | 2.00 | 18,242.8 | 36,485.6 |
| 6 | Installation, Testing and Commissioning of Block Proving by Axle Counter (BPAC) using Block Panel and UFSBI for Single line operation complete with all accessories as per Specification No. IRS:S-105/2012 (Ver.0) or latest. | Set | 2.00 | 99,197.88 | 1,98,395.76 |
| 7 | Installation, Testing and Commissioning of SMPS based Integrated Power Supply System (Large-IPS) as per Specification No. RDSO/SPN/165/2012 Ver. 3.0 or latest and conforming to S.E. Railway Drawing No.SK/DRG/OL/SER/253, dated 23.01.19. | Set | 1.00 | 59,000 | 59,000 |
| 8 | Transportation and installation of Electric point machine including lubrication a n d M S plate fixed on concrete sleepers complete with fixing of anti-theft cover, crank handle key interlocking arrangements Junction boxes, ground connections including s m i t h y works, insulation of M S p l a t e o n w h i c h t h e point machines t o b e fixed from the gauge tie plate involving riveting/welding of angle cleats, termination o f cables, preliminary adjustment of operation of points b y crank handle, wiring, painting a n d lettering a s required. Drilling of holes for fixing of switch extended bracket and leading stretcher bar. Note:- All the required nut-bolt, washer, MS-plate for anti-theft, eyelets, etc. for fixing of point machine to be supplied by contractor and Inspected by the representative of Sr.DSTE/CKP. | Numbers | 2.00 | 13,280.9 | 26,561.8 |
| 9 | Transportation, installation o f 2-Aspect Signal Post for MACLS as per drawing no. Con/SK/T/12 or SEM-Drawing No. 19-D3 complete with signal units, base, ladder and other fittings, excavation of pit, erection of posts, casting concrete foundation thereof as specified in the note given in drawing, fixing of complete fittings of the signals with necessary earth screen protection arrangement including termination of cables, painting and lettering as required. Foundation Bolts of size 24 mm x 915 mm as per RDSO Drawing No. SA-116 A/M confirming to IS: 226 and IRS:S-10/78 Rev.8. | Numbers | 2.00 | 10,595.22 | 21,190.44 |
| 10 | Transportation, installation o f 3 / 4 - Aspect Signal Post for MACLS as per Con/SK/T/12 or SEM-Drawing No. 19- D3 complete with signal u n i t s , b a s e , l a d d e r and other fittings, excavation o f p i t , erection o f posts, casting concrete foundation thereof as specified i n the note given in drawing, fixing of complete fittings of the signals with necessary earth s c r e e n p r o t e c t i o n arrangement including termination of cables, painting and lettering as required. Foundation Bolts of size 24 mm x 915 mm as per RDSO Drawing No. SA-116 A/M confirming to IS: 226 and IRS:S-10/78 Rev.8. | Numbers | 6.00 | 11,313.84 | 67,883.04 |
| 11 | Transportation, installation of Position light Shunt Signal as per Con/SK/T/12 or SEM Drawing No. 19-D4 complete with units, base and other fittings, excavation of pit, casting of concrete foundation thereof as per note given in drawing, fixing in complete fittings of signal including termination of cables, painting and lettering as required. Foundation Bolts of size 20 mm x 305 mm as per RDSO. | Numbers | 2.00 | 5,010.28 | 10,020.56 |
| 12 | Transportation and fixing of Calling ON Signals/ Dependent Shunt Signals / Illuminated 'A' / Illuminated 'AG' marker for MACLS on the erected signal post complete with marker including termination of cables, painting and lettering as required. | Numbers | 4.00 | 2,324.6 | 9,298.4 |
| 13 | Transportation and fixing of Junction type Route Indicator with Route arm on the erected signal post including termination of cables, painting lettering as required. Route Indicator with Route arm One way. | Numbers | 2.00 | 767 | 1,534 |
| 14 | Transportation, installation a n d painting with retro reflective tape of SLB/BSLB/Legend/Stop Board etc. as per SEM Drawing No. 19-D4. This includes i) Excavation of pit of depth 900 mm, width 600 mm. ii) casting in the ratio of cement concrete mixture shall be 1:3:6 (iii) foundation, (iv) Erection etc. Note: Supply of sighting board by contractor to be as per SEM Drawing No. 12- D1 or specified by Railway. | Numbers | 4.00 | 8,382.72 | 33,530.88 |
| 15 | Installation, Testing & Commissioning of Single Section Digital Axle Counter phase reversal type as per Specification No. RDSO/SPN/177/ 2012 Ver.3 or latest without tool kit. | Set | 2.00 | 52,902.94 | 1,05,805.88 |
| 16 | Installation, testing and commissioning of track circuit on Straight Portion o f Tr a c k (without involving points and crossings) a s per Drawing No. SK/DRG/OL/27 and track b o n d i n g plan i n c l u d i n g d r i l l i n g o f 9 / 3 2 " h o l e on Rails, provision o f bonding, Glued Joints, fixing and painting of Track Lead Junction Boxes, provision of tail cable terminations, Track lead wires, Jumper wires, terminals, track feed set (Track Charger, Adjustable Resistance, choke c o i l , fuses, battery e t c . ) and also lettering/ numbering of track lead junction boxes, block joints and track circuits. This also includes transportation of all materials required for the above installation. Note:- Track feed set, bonding wires, TLJB, channel pin, tail cable to be supplied by Railway. | Set | 4.00 | 7,790.36 | 31,161.44 |
| 17 | Painting of two coats of synthetic enamel paint over one coat of primer on the following after scraping & cleaning surface wherever necessary with supply of paints. Note: The paint and primer should be from Asian Paints/ Nerolac / Dulux / Berger. The primer / enamel paints (Aluminium synthetic, black enamel, brilliant white, grey and yellow) will be as per (IS: 5660 of 1970) / (IS: 2932 of 1974). Track Lead Junction Box. (Black enamel outside only). | Numbers | 4.00 | 79.06 | 316.24 |
| 18 | Transportation, installation and charging of Secondary Cell 2V (lead acid type) and preparation of electrolyte for lead acid cells. Charging to be done as per OEM's instruction with uninterrupted power supply in presence of Railway representative. After charging, it should be kept the dedicated location as per use. Note- If power is not available at site of work, charging may be done at nearby location as per convenience of the railway. This includes transportation of uncharged cells at the site of charging, supply of acid, distilled water at the site of charging and transportation of charged cells to the site of work. (i) 2 Volt 80AH. | Numbers | 6.00 | 397.66 | 2,385.96 |
| 19 | Excavation of earth pit, placing & fixing of Earth electrode with construction of cement enclosure to SEM Drawing No. 19-D6 and drawal of 6 SWG GI/Copper cable from earth electrode t o goomties, r e l a y room, cabin, station, etc. and drawal of MS flat 35mm x 6mm for signal post/Location box shall be used a s t h e case may be, including fixing at both ends of the wire/MS flat. This includes transportation of materials. Note: Materials such as charcoals, salt, sal ammoniac, 6 SWG GI wire, copper lugs with Steel bolts & nuts etc. shall b e supplied b y t h e contractor. M S flat 35mm x 6mm/Copper cable shall be supplied by Railway. | Set | 10.00 | 1,759.38 | 17,593.8 |
| 20 | Alteration/modification in existing location boxes, fixing of equipments, cable insertion, termination, wiring, testing & commissioning, two coat painting, lettering to suit the circuits as per approved wiring diagram. This includes filling with sand and plastering the same. Note: All the sundry materials except that included in supply schedule shall be supplied by the contractor and Inspected by the representative of Sr.DSTE/CKP. | Numbers | 8.00 | 2,685.68 | 21,485.44 |
| 21 | Execution o f Fu l l Apparatus C a s e w i t h pit, concrete foundation, surrounding earth work, erection, installation as per Drawing No. Con/SK/T/8 and wiring as per S E M Drawing No.19-D8 o r a s p e r direction o f site engineer. Fixing o f H y l a m s h e e t s t r i p o f s i z e approx. 925mmx100mmx3mm (including supply) with h o l e on both side for writing & terminal description, terminals, fuse blocks, relay and other accessories for signal/track circuit, termination o f cable with number embossed ferrules, bunching of cables with PVC tape, earthing of cable armour as required. Painting of the apparatus case inside and outside after clearing the surface thoroughly and first coating of anticorrosive paint and subsequent two coats o f Aluminium paint outside a n d red oxide inside and lettering etc. This includes transportation of 25 mm/12mm Hylam sheet for shelf or as required and also includes minor modification in L/Boxes as per site requirement . T h e contractor s h a l l s u p p l y o f 4 n o . of foundation bolts 22 mm dia. x 450 mm long with 2 flat spring washers, one nut is to be used for each set, sand for filling u p cable pit inside t h e apparatus c a s e and bolts, nuts, screws, MS Clamps for fixing equipment/cable. Note: - Part payment shall be released after completion of- (i) Foundation- 40%, (ii) Erection - 10%, (iii) Wiring, earthing, testing - 20%, (iv) Painting, writings - 10%, (v) Plastering, sand filling & etc. - 10%, (vi) Commissioning - 10%. | Numbers | 14.00 | 8,983.34 | 1,25,766.76 |
| 22 | Cement Concrete of proportion 1:3:6 (Cement: Sand: Stone chips of 25mm nominal size) for miscellaneous items. It includes excavation, ramming of CC by using vibrator, curing and plastering with cement and sand mixture (aggregate will not exceed beyond 3.8 cm). Note: All materials required for foundation are to be supplied by the contractor and Inspected by the representative of Sr.DSTE/CKP. | Numbers | 30.00 | 3,582.48 | 1,07,474.4 |
| 23 | Cutting and smoothening of inside surface of sizes 80 mm deep and 170 mm width for single/multiple cable chase in concrete or hard rocks or platform or cemented floor. This work includes laying and covering of cable laid in the chase with standard sizes Second class/Fly Ash brick placed and embedded longitudinally and plastered on the top of the bricks and curing 72 hrs. as per Drawing No. Con/SK/T/1 for the following. (i) Single cable/Multiple cable (upto 3) (see Note 4 of Drawing no. Con/SK/T/1). Note: Bricks, sand and cement shall be supplied by the contractor at site and to be inspected by Railway Site Engineer-in-charge before placing in the chase. | Metre | 500.00 | 251.34 | 1,25,670 |
| 24 | Transportation, Grouting/erection, wiring as per approved wiring diagram of 19" relay rack/Composite/Q- Series Relay Rack with subsequent alteration (with 3/4 X 9" anchor bolts with one nut and one washer per bolt & D-bracket & 60mm insulator), fixing of M.S. ladder as per requirement for rack to rack connection, CTR and control panel, fixing of plug boards, relays, terminal blocks, terminals, filter units, tag blocks, fuses, bus bars, shelves, strips, 6mm Hylam sheet of required length for writing terminal description etc. fixing and termination of cables on t h e relay racks with number embossed ferrules, bunching of cables w i t h P V C t a p e , earthing o f cable armour including painting a n d lettering. Wiring and testing of complete relay rack accommodating all relays as per wiring diagram. All materials such as eyelets, M.S ladder, Hylam sheets, ferrules, trough etc., if required for modification of rack shall b e supplied by the contractor and to be carried out at site within the cost. | Numbers | 3.00 | 46,785.82 | 1,40,357.46 |
| 25 | Transportation, erection, fixing, installation and commissioning of Cable Termination rack (CTR), fixing of MS Wiring ladder from relay rack to CTR, and on to top of the CTR- including supply of 3/6mm Hylam sheet of required size for fixing terminal blocks & writing terminal description, termination of cables, bunching of cables by PVC t a p e a n d earthing o f cable armours, painting, lettering as required. The contractor shall draft terminal analysis chart on the white bond paper of appropriate size & supply wiring materials l i k e eyelets o f sizes, trough, condensers a n d resistances a s per required value, HV protection cover with fixing top caps and danger symbol, soldering material of approved quality etc. shall be supplied by the contractor. Cement o f approved brand, stone chips 5/8" and sand as required for mounting CTR, Sand for filling of cable pit and other required masonry work, Sundry materials such as MS plate/angles, MS wiring ladders as per approved Drawing, , Anchor bolt 5/8" X 9" with nut and washers -4 No., Nickel plated screws 2BA X1" with nuts and washers for fixing Hylam sheet, numbers embossed ferrules 2.5 sq. mm, PVC bunching tapes and buttons, paint synthetic enamel of smoke grey colour for painting, MS clamps with bolts and nuts of sizes, D-bracket and 60mm insulator, for fixing cables, screws of sizes as required shall be supplied by the contractor. Cables should be routed properly through ladder. All the materials required for installation, wiring, testing and commissioning as per the approved wiring diagram except the materials included in supply schedule shall be supplied by the contractor. | Numbers | 3.00 | 51,014.94 | 1,53,044.82 |
| 26 | Alterations/modifications works on existing relay rack (Q- series/ Composite Relay Racks)/Cable Termination Racks (CTR) including works of installation, wiring, termination, testing and commissioning. The w o r k includes fixing of aluminium/steel/M. S ladder along with supply as per requirement to accommodate additional p l u g board, relays, terminals/blocks, terminals, t a g blocks, fuses, transformers, b u s bars, T W shelves/strips etc. in the existing relay racks/CTR's, 6 mm Hylam sheets of required length f o r writing terminal description etc. fixing and termination of cables o n t h e r e l a y r a c k s , C T R ' s with number embossed ferrules, bunching of cables with PVC tapes, earthing of cable armours, covers including painting and lettering, making anti tilting arrangement. Note:- a ) Existing relay r a c k (Q-series/ Composite Relay Racks) : Payments for alterations in existing relays upto 20 nos. relays & above 20 nos. shall be made 50% & 100% respectively. b) Cable Termination Racks (CTR):- Payments for alterations in existing CTR upto 120 cores & above 120 nos. cores shall be made 50% & 100% respectively. | Numbers | 5.00 | 20,844.7 | 1,04,223.5 |
| 27 | Installation of Single Maintenance Free Earth pit as per RDSO Drawing No. SDO / RDSO/ E&B/001 which includes the following:-a) Digging/Auguring/Boring o f single earth p i t of 100mm to 125mm dia. to the depth of approx. 3 meter. b) Insertion of 3.0 meter electrode and penetrating it minimum 150 mm by pushing gently with sledge hammer where the natural soil i s assumed. (c) Filling of earth pit with Earth Enhancement Compound (EEC) in slurry f o r m a n d backfilling. ( d ) Carrying out exothermic weld connection on single earth electrode to a copper tape of 200 x 25 x 6 mm. (e) Carrying out exothermic weld connection on the copper tape of 200 x 25 x 6 mm on Earth Electrode for connecting two 35 Sq. mm cables f o r redundancy. ( f ) T h e exothermic welding material for bonding the earth system shall be procured f r o m R D S O approved fi r m s , which includes graphite modules, clamps, weld metal powders. (g) The dimension of the chamber will be of 300 x 300 x 300 mm (inside dimension) o f R C C w i t h 5 0 m m t h i c k a n d fine finish, Inspection chamber should be as per IEC 62561-5 or latest. The top RCC cover size shall be 400mmX400mmX50mm. The date of testing and earth resistance value shall be written on the cover with black base with yellow paint. | Set | 6.00 | 5,989.68 | 35,938.08 |
| 28 | Installation, testing & commissioning o f Earth Leakage Detector (ELD) - 8 channels as per Specification No. RDSO/SPN/ 256/2002 or latest. | Set | 1.00 | 5,841 | 5,841 |
| 29 | Termination of Outdoor Cables : (Main Cables/tail cables) at both ends in location boxes, cable termination rack in relay room, station building, generator room etc. The item includes dressing of cables and wires with dressing threads as per standard practice. All material required for this item will be supplied by contractor. The out door cable shall be terminated in Relay room, DG Room, ASM Room etc. under supervision and instructions issued by Engineer-in-Charge of the work. Inspection by Consignee. | Per Conductor | 3000.00 | 10.62 | 31,860 |
| 30 | Design of Route Control Chart (RCC), Front Plate Diagram (FPD) and circuits for Panel Interlocking as per approved Signal Interlocking Plan and typical circuit diagram. Wiring diagram shall be made in 'Black Colour' and Alteration to wiring diagram with Red for new installation and green for deletion contact/equipment. All the drawing and design shall include the copy of production checking, independent checking, first & second level checking, and commissioning copy. Submission of Two sets of prints with all correction for Railway's approval. Approved copy (06 Sets) of all drawings in plastic folders along with the original tracings in spiral bound with editable Auto-CAD copy latest version. This includes the following drawings for each station: (1) Cable layout plan (Main) (2) Cable layout plan (Tail) (3) Cable matching chart (4) Location Hut drawing (5) Termination chart of end goomties and location hut (6) Traction bonding plan (7) Contact Analysis Chart (8) SWRD & GWRD (9) Equipment Layout Plan (10) Power Supply arrangement diagram (11) Any other drawing as found relevant as per site condition. Office record include the following: (i) Battery History book (ii) Track Circuiting Register. (iii) Track circuit maintenance Register. (iv) Cable Meggering Register (v) Signal History Register (vi) Lamp Register (vii)Glued joint/ Block joint Register (viii) Point machine Maintenance Register .(ix) Joint Inspection Register (a) P. Way, Electrical & Signal. (x) Relay Register (xi) Route cancellation Register (xii) Relay Room Key Register (xiii) Emergency Point operation Register. (xiv) Crank Handle Register (xv) Emergency Route Cancellation Register (xvi) Axle counter reset register. (i) Up to 6 to 10 line yard. | Station | 1.00 | 2,26,234.32 | 2,26,234.32 |
| 31 | Preparation of Station Working Rules (SWR) in English on the basis of station working rule diagram/gate working rule diagram to be supplied by the contractor. Submission of two draft copy to railway for checking and resubmission of draft in three copies for approval of division after making corrections. Soft copy (Editable form) to be supplied in pen drive of that station( KMPD). | Set | 1.00 | 13,351.7 | 13,351.7 |
| 32 | Preparation of Station Working Rules (SWR) in Hindi/Regional Language on the basis of station working rule diagram/gate working rule diagram to be supplied by the contractor. Submission of two draft copy to railway for checking and resubmission of draft in three copies for approval of division after making corrections. Soft copy (Editable form) to be supplied in pen drive of that station( KMPD). | Set | 1.00 | 13,351.7 | 13,351.7 |
| 33 | Design and supply of the following drawings to office records as per requirement of the Railways. This includes alteration at different stages and finally supply of all the drawings including tracings within 90 days from the date of commissioning of the work. This includes the following drawings for each station: (1) Cable layout plan (Main) (2) Cable layout plan (Tail) (3) Cable matching chart (4) Location Hut drawing (5) Termination chart of end goomties and location hut (6) Traction bonding plan (7) Contact Analysis Chart (8) SWRD & GWRD (9) Equipment Layout Plan (10) Power Supply arrangement diagram (11) SIP and any other drawing as found relevant as per site condition. Office record include the following:(i) Battery History book (ii) Track Circuiting Register. (iii) Track circuit maintenance Register. (iv) Cable Meggering Register (v) Signal History Register (vi) LED Register (vii)Glued joint/ Block joint Register (viii) Point machine Maintenance Register .(ix) Joint Inspection Register such as P. Way, Electrical & Signal. (x) Relay Register (xi) Route cancellation Register (xii) Relay Room Key Register(xiii) Emergency Point operation Register. (xiv) Crank Handle Register (xv) Emergency Route Cancellation Register (xvi) Axle counter reset register. Note:- (i) All the diagram will be made on CAD. The paper size of wiring diagram will be A-3 and minimum text size of 2 mm should be used. Wiring diagram will be made in 'Black colour'. Alteration to wiring diagram will be done using TWO drawing method' RED and Green colouring should be used on production copies of design detail to indicate changes as follows: RED = new equipment to be installed or commissioned. GREEN = redundant equipment to be recovered. (i) Up to 6 to 10 line yard. (Inspection by representative of Sr.DSTE/CKP). | Station | 1.00 | 57,067.16 | 57,067.16 |
| Schedule total | ₹27,26,825.77 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Annexure-1and2.pdf
ATTACHMENT
Annexure-L.pdf
ATTACHMENT
Annexure-MandN.pdf
ATTACHMENT
Anneure-V.pdf
ATTACHMENT
Annexure-VA.pdf
ATTACHMENT
AnnexureVIA.pdf
ATTACHMENT
Annexure-VI-B.pdf
ATTACHMENT
Annexure-Z.pdf
ATTACHMENT
TENDERFORMFirstSheet.pdf
ATTACHMENT
Gcc 2022
ATTACHMENT
GCCAdvanceCorrectionSlipNo.11..pdf Gcc Advance Correction Slip
ATTACHMENT
SpecialConditionsofContract.pdf
ATTACHMENT
ColouredFinal_GCC_April-22_pdf_27.04.22.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo.11..pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .