ATA 2026-Painting of Dreir A and B and connected structurals in NP Plant of FACT(CD), Ambalamedu.

ATA 2026-Painting of Dreir A and B and connected structurals in NP Plant of FACT(CD), Ambalamedu.

Cleaning the structural/other surface neatly at all heights, manually with suitable tools or with high pressure water jet spray (using suitable mechanical means), and scraping if required, to remove the whole accumulated dust, rust, dirt etc as per departmental instructions.

Painting one priming coat on new/old iron work at all heights with approved quality zinc chromate yellow metal primer of approved brand & quality at all heights including cost of primer and materials, labour, scaffolding charges, cleaning the site etc. as per departmental instructions

Painting with synthetic enamel paint using approved quality paint as specified two coats in distinct colour at all heights (over a priming coat already done and paid separately) for iron work after cleaning the surface including cost of all materials, labour charges, scaffolding charges etc.complete as per deptl instructions. First and second coat shall be distinct colour.

Applying two coats of self priming coal tar epoxy paint, "Rust-O-Seal" of Asian Paints / "Protecteros CTE mastic" of Berger Paints or equivalent approved quality coal tar epoxy having volume of solids 70 % (aprox.) at all heights including cost of paint, scaffolding charges, labour charges and all other incidental charges etc.complete as per departmental instructions at site

Preparing the surface by manual/ power tool cleaning to remove the rust and loose paint film from the surface followed by high pressure water jet cleaning of the surface (Payment for cleaning vide seperate item).After cleaning the surfacepainting with one coat of Protectomastic XL MIO or equivalent at 125 microns DFT with minimum volume solid of 85% followed by one coat of EPILUX 950 Super HB Phenolic coating at 125 microns DFT and BERGERTHANE Finish Aluminum or equivalent at 20 microns DFT.The total DFT should be minimum 270 microns. The cost to be inclusive of required paint materials,labour charges for 3 coats of painting,scaffolding charges, hire for equipment’s and all necessary consumables all other incidental charges etc.complete as per departmental instructions at site.

Painting letters or figures above 10 cm & up to 20 cm ht. Block, Roman, Italic or Indian with any kind of paint