Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.5 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹28.0 L+₹1.4 L (5.40%)Rejected-Finance | L2 | Rejected-Finance Second Lowest | |
| 3 | L3₹28.6 L+₹2.1 L (7.77%)Rejected-Finance 202 VIDYA NAGAR BEHIND SANJAY GANDHI MEMORIAL COLLEGE KAMRE RANCHI JHARKHAND 835222 | RANCHI | JHARKHAND | 835222 | L3 | Rejected-Finance Third Lowest | |
| 4 | L4₹28.9 L+₹2.3 L (8.74%)Rejected-Finance | L4 | Rejected-Finance Fourth Lowest | |
| 5 | L5₹29.8 L+₹3.3 L (12.4%)Rejected-Finance SHIVAJI NIWAS VILL CHIMBALHAR P O GEETA PEETH PALAMPUR HP 176061 | KANGRA | HIMACHAL PRADESH | 176061 | L5 | Rejected-Finance Fifth Lowest |
Tender Value
Refer Docs
EMD Value
₹58,400
Closing Date
25 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major Sameer Wadekar
Holta Cantt Palampur
PROVN OF TOILET AND BATHROOM FOR TPS LIVING IN NEAR BLDG NO P-99 AT PALAMPUR MIL STN
2023_MES_577705_1
GEP-43/2022-23
Open Tender
Civil Works
Item Rate
180 days
Palampur Mil Stn
As per tender documents
8 documents required · 8 mandatory
₹500
Yes
GE Palampur
₹58,400
Yes
31 Mar 2023
28 Jan 2023
27 Feb 2023
28 Jan 2023
25 Feb 2023
11 Feb 2023
Amount
Surface excavation n.exc 30cm deep and averaging 15 cm deep in hard/dense soil complete all as specified and directed.
Excavation in trenches,nexc 1.50m wide and n exc 1.50m in depth for foundation,etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sq m on plan and getting out in hard/dense soil complete all as specified and directed.
M&L broken stone or boulder hardcore of gauge n exc.63mm,deposited,spread and levelled in layers n exc,15 cm thick,watered and rammed to a true surface complete all as specified and directed.
M&L PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundations,filling and mass concrete complete all as specified and directed.
M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:6, complete all as specified and directed.
M&L Brick work with sub class 'B' bricks, straight or curved on plan, to any radius, in half brick thick wall, using old size brick, built in cement mortar 1:4, complete all as specified and directed.
M&L forming square grooves in plaster n exc 12mm deep and n exc 15mm on face complete all as specified and directed.
M&L rendering 15mm thick plaster in cement mortar(1:6) on fair faces of brick work or concete surfaces, finished even and smooth without suing extra cement complete all as specified and directed.
M&L rendering 15mm thick plaster in cement mortar(1:4) on fair faces of brick work or concete surfaces, finished even and smooth without suing extra cement complete all as specified and directed.
Preparation of new plastered or unplastered surfaces of walls and applying two coats of Oil bound distemper, of approved tinted over a coat of chalk whiting for smooth surface of wall complete all as specified and directed.
Preparation of newly plastered surfaces of walls and applying two or more coats of 100% premium acrylic emulsion paints having VOC content less than 50 gms/litre, and UV resistance as per IS 15489-2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additived @1.43 litre/10 sqm over and including priming coat of exterior primer applied @0.90litre/10 sqm on new surface complete all as specified and directed.
M&L preparing new surface of steel of any description, over 10cm width or girth not other wise described and appliying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.
M&L 100mm thick PCC 1:4:8 type D-2 (40mm graded crushed stone aggregate) as in sub base of floors/ paver block/ path etc finishing the surface even & rough without using extra cement complete all as specified and directed.
M&L 75 mm thick PCC (1:3:6) type C-2 using 40 mm graded crushed stone aggregate laid in alternative bays area not exc 2 sqm each as in plinth protection laid to slope of 1 in 12 including finishing the surface even & fair & filling the joints (6 mm wide) with mastic filling i.e one part of bitumen 85/25 or VG-30 and 3 parts of sand by weight complete all as specified & directed.
M&L forming construction (Dummy) joints 30mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and directed.
S&F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer,complete all as specified and directed.
S&F 35mm thick flush shutters, covered with plywood face panels, solid core construction, with block board core, commercial type complete all as specified and directed.
S&F steel ventilator with top hung shutter including box type hinges, steel peg stay, complete all as specified and directed.
S&F factory made steel window with side hung shutters including box type hinges with steel handle, steel peg stay,complete with glazing bars including applying one shop coat of red oxide primer complete all as specified and directed.
S&F factory made steel window with side hung shutters including box type hinges with steel handle, steel peg stay,complete without glazing bars including applying one shop coat of red oxide primer complete all as specified and directed.
S&F rolled mild steel sections like angle, channel, flat etc as inframed work such as grills, gratings,etc,with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders ; framed balusters; walk ways; railings; framed work of water tanks and similar work confirming toFe-290Gde E-165 complete all as specified & directed by Engineer-in-charge.
S&F 4mm thick figured glass, pin head type and glazing with oil putty in squares n.exc. 0.50 sq.m in each pane, complete all as specified and directed.
S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc. 0.5 sq.m in each pane complete all as specified and as directed.
S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S&F mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L RCC M-25 design mix using graded crushed stone aggregate in footings, rafts, foundation beams, plinth beams, base of columns, basement slabs, etc. complete all as specified and directed.
M&L RCC M-25 design mix using graded crushed stone aggregate in columns, pillars, posts and struts etc. complete all as specified and directed.
M&L RCC M-25 design mix using graded crushed stone aggregate in chajjas complete all as specified and directed.
M&L RCC M-25 design mix using graded crushed stone aggregate in beams, cantilevers, bressummers, lintel over 1.5m span complete all as specified and directed.
Formwork to sides of rough finished concrete surface of foundations, footings, bases of columns, raft and raft beams, sides and soffits (in any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.
Form work to rough finished surfaces of concrete for sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.
Form work to rough finished surfaces of concrete for sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc. complete all as specified and directed.
Form work to rough finished surfaces of concrete for sides and soffits of fins, louvers, fascia, chajjas etc. complete all as specified and directed.
Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil complete all as specified.
Removal of excavated material (soil) to a distance n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, compete all as specified and directed. (Colour as approved by GE)
S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, compete all as specified and directed. (Colour as approved by GE)
M&L Non-skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.6 sqm but not exc 0.11 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.
M&L coloured glazed ceramic tiles in vertical surfaces 300 x 450x 7mm/ 300 x 600 x 7mm as in skirting/dado etc, over and including 10mm thick backing coat in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed.
S&F vitreous china squatting pan water closet, orissa pattern, size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including PVC (SWR) 'S' trap,setting trap and pan in lime concrete and jointing to flush pipe complete all as specified and directed.
S&F 10 litres capacity PVC valve less symphonic action type flushing cistern (ISI Marked) low level with inlet ball valve, float and handle including brackets & 32 mm size PVC flush pipe, complete all as specified and directed.
S&F 15mm bore stop valves/angle cock (two way if required), cast copper alloy, chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union complete all as specified and directed.
S&F fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge.
S&F PVC connection 15mm size, 600 mm long with PTMT nuts complete all as specified and directed.
S&F pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified & directed.
S&F vitreous china, wash basin flat back, with pedestal white of size 550mm x 400mm including brass Chromium Plated waste coupling 32mm size with long screwed shank and fly nuts, flange end bedded in red lead cement,PVC medium grade 32mm size waste pipe, PVC connection 15mm size, 450mm long with PTMT nuts at both ends complete all as specified and directed.
S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specifications & directed.
S&F factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
S&F 100 mm size butt hinges, stainless steel (ISI marked) complete all as specified and directed.
S&F 150 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F aluminium handles, cast type, anodised of size 150 mm long, complete all as specified and directed.
S&F 300 mm size (length of bolt) aluminium alloy, anodised, sliding door bolt with hasp and staple ,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S&F mild steel roof trusses (framed), trussed, purlins, crane gantries. rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, Fe 410-W (Grade E-250) complete all as specified and directed.
M&L 150mm bore salt glazed stoneware drain pipes grade 'A' laid in trenches and jointed in cement mortar complete all as specified and directed.
M&L cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) bed to drain pipes including packing under and complete surrounding pipes with concrete after they are laid and tested in trenches for 150 mm bore SGSW drain pipe complete all as specified and directed.
M&L plain cement concrete 1:3:6 type C-1 using 20 mm graded crushed stone aggregate cast in situ in lintels up to 1.5 m clear span, cills steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, back side filling of steel chowkats or frames, kneelers, apex stones (fixing hold fasts), bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed.
M&L pre-cast cement concrete type B-1 1:2:4 (20mm graded crushed stone aggregate) as in landings, cover slabs for man holes, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set in CM 1:4 complete all as specified and directed.
S&F 100 mm bore cast iron soil , waste and vent pipes (spun pipe), in any length with or without ears, with cement joints, fixed to wall with stack clamps, complete all as specified and directed.
S&F 75 mm bore cast iron soil , waste and vent pipes (spun pipe), in any length with or without ears, with cement joints, fixed to wall with stack clamps, complete all as specified and directed.
S&F 100mm bore of pipe cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with ovel access doors, complete all as specified and directed.
S&F 75mm bore of pipe cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with ovel access doors, complete all as specified and directed.
S&F stack clamps suitable for 75 mm bore pipe made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of staysto wall or roof complete all as specified and directed.
S&F stack clamps suitable for 100 mm bore pipe made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of staysto wall or roof complete all as specified and directed.
S&F 100mm bore branch pieces, Tee, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors complete all as specified and directed.
S&F GI tubing (ISI marked) 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors (concealed if required) complete all as specified and directed. Note:- The cost for cutting chases in walls, floors, etc and their making good for concealed pipe if required included in this item.
S&F GI tubing (ISI marked) 20mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors (concealed if required) complete all as specified and directed. Note:- The cost for cutting chases in walls, floors, etc and their making good for concealed pipe if required included in this item.
S&F 15mm bore stop valves/angle cock/gate valve, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union complete all as specified and directed.
S&F 20mm bore stop valves/angle cock/gate valve, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union complete all as specified and directed.
S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GI nipple for inlet, outlet, washout and overflow etc. complete all as specified and directed.
S&F ball brass valves, high pressure, with polythene float and fly nut complete, screwed for 20 mm bore iron pipe or brass ferrule complete all as specified & directed.
S&F clip- in false ceiling system with plain steel beveled edged tile (600mm x 600mm) manufactured out of 0.70mm aluminium sheet having powder coating with 60 microns polyester paint on front side. Two sides of each tiles shall be raised and piped and stopped to ensure positive engagement into the spring clip-in profile allowing for demounting of individual tiles. The rigid suspension system consists of rows of galvanized steel .50mm thick clip- in profile of size 38mm x 20mm and installed at 600mm c/c spacing to support the tiles clip-in profiles shall be suspended and joitned from galvanized steel 'C' channels of size 10mm x 38mm x 10mm with hold on clamps at spacing as specified by manufacture. Suspension angles shall be suspended from the roof structure by GI ceiling brackets as per manufacturer instructions and jointed to the 'C' channels. The tiles shall be held in place of pressure clips 'C' at spacing as per manufacturers instructions. GI wall angle shall be used on wall angle shall be used on wall of size 20mm x 30mm x 20mm and 0.5mm thick with matching the colour with tiles all as per manufacturer's specifications/instructions and including necessary scaffolding all as specified and directed.
M&L 60 mm thick rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size (shape as approved bt GE) laid in path,porch,hard standing or flooring etc conforming to IS-15658-2006, M-35 grade over and including 25 mm thick layer of sand cushioning, complete all as specified and directed .
M&L 75mm thick PCC 1:4:8 type D-2 (40mm graded crushed stone aggregate) as in sub base of floors/ paver block/ path etc finishing the surface even & rough without using extra cement complete all as specified and directed.
M&L point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS-H cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including concealed PVC rigid conduit with accessories fixed wall/roof/floor etc, ISI marked with mild steel/pressed steel sunken box (with earth dolly) duly painted with two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally. and two coats of black bituminous paint over a coat of red oxide primer externally,covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for One light/ fan/ Exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and directed.
-Ditto- all as per serial item No. 75 above but one 5 pin socket outlet, 6 Amp on the same board complete all as specified and directed.
All as per Item No. 75 above but for 16 Amps socket point on independent board with 2.5 Sqmm PVC insulated FRLS-H multi-stranded copper conductor with 2.5 Sqmm PVC insulated FRLS-H multi-stranded copper conductor as earth wire,complete all as specified and directed by Engineer-in-charge.
S&F switch piano 6 Amp flush type single pole one way with ISI marked,complete all as specified and directed.
S&F switch piano 16 Amp flush type single pole one way with ISI marked,complete all as specified and directed.
S&F socket outlets 2-in-1, 3 pin 6 Amp flush type, complete all as specified and directed.
S&F socket outlets 6 and 16 Amps 2-in-1, 5 pin flush type, complete all as specified and directed.
S&F Ceiling rose, 3 phase / PVC / Polycarbonate, isolated bodycomplete all as specified and directed.
S&F Lamp holder with LED bulb 9W, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
S&F 1x 18 watt 4 feet long LED tube light fitting box type with compact commercial batten suitable for single T8 LED tube 4 feet long and polycarbonate T8 tube with in built driver with metal head sink double sided connection complete all as specified and directed.
S&F LED bulk head fittings IP-65 protection class with LED lamp 10 watt complete all as specified and directed. (Bajaj cat part No: BIBWP 10W LED or equivalent make as approved by GE)
Supply and fix exhaust fan, steel body AC single phase, 230 V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed.
S&F Factory made DB TPN 4 way double door with suitable size of copper bus bar concealed in wall IP 43 protection,415 V,3 phase 50 Hz for fixing MCB complete all as specified and directed.
S&F MCB TPN ‘B’ curve, 10KA 63 amps including necessary connection complete all as specified and directed.
S&F MCB SP ‘B’ curve, 10KA 6 to 32 amps including necessary connection complete all as specified and directed.
Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in groung (earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 below normal ground level, connecting to the GI earth wire of size 4mm size by means of bolts nuts, check nuts and protected by provision of GI medium grade pipe of 15mm bore including provision of 40mm thick cover of RCC (1:2:4) reinforced with XPM (wt not less than 4 Kg/sqm) and frame of angle iron 40mm x 40mm x 6mm with 6mm dia MS bar handle made to shape, GI light grade 20mm dia pipe for watering of suitable length placed on top edge of earth plate, common salt and charcoal filling, with fixing arrangement, funnel, wire mesh and excavation and earthwork in any type of soil, returning filling in and removal of surplus soil to distance not exceeding 50m complete all as per Plate No. 3 of SSR 2009 Part-I and connecting to earth test point all as specified and directed by Engineer-in-Charge and including testing on completion. NOTES:- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B0, 80mm thick reinforcement with 8mm TOR steel @ 100c/c in lieu of CI cover and the rate includes in the unit rate of item. (ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe upto 7.50m and the rate includes in the unit rate of item. (iii) Earth pit chamber and RCC cover shall be painted with red paint over a primer coat and the rate includes in the unit rate of item. (iv) The earth chamber shall be constructedd 5m away from the edge of the bldg pit and the cost of the same is deemed to be included in the rate quoted of this item.
Excavation in trenches n exc 1.5 m wide and n exc 1.5 mtr in depth for foundation laying of under ground cable erecting of pole stay not exc 10 sqm on plain and not exc 1.5 m depth and getting out in any type of soil complete all as specified.
Returning, filling in (soil ) including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil complete all as specified.
Removal of excavated material (soil) to a distance n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified.
S&F GI tubing (ISI marked) 25mm bore medium grade with all fittings and fixed complete laid in trenches or laid in floors for fixed to wall complete all as specified and directed.
S&F 25mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for GI tubing complete all as specified and directed.
M&L for cutting existing 40mm steel tubing for alterations or additions to connect 25mm bore GI tubing (Each cut measured) complete all as specified and directed. Note: Cost of connection and threading in 20mm bore GI tubing included in this item.
Supply & laying for fixing or passing through pipe or laid in trenches, 1100 volt grade heavy duty cable XLPE insulated, armoured electric cable with aluminium conductor, cross-sectional area 16 Sqmm, 4 core complete all as specified and directed.
M&L sub class “B” brick, old size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning, with width equal, to length of the brick, complete all as specified and directed.
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 35 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece, plug etc. complete all as specified and directed.
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece, plug etc. complete all as specified and directed.
S&F PVC connection for hot and cold water, 15mm size, 450 mm long with PTMT nuts complete all as specified and directed.
S&F fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed.
S&F 15mm bore stop valves/angle cock, cast copper alloy fancy type, chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union complete all as specified and directed.
M&L cutting existing 15/20mm steel tubing for alterations or additions to connect 15mm bore GI tubing (Each cut measured) complete all as specified and directed. Note: Cost of connection and threading in 15/20mm bore GI tubing included in this item.
Material and labour for GI tubing (light grade) with all fitting laid in trenches or along pole/bldg or under road crossing and protection pipe or fixed alongwith wall/pole with necessary clamp nut bolt and washer bore of pipe 40mm complete all as specified.
Sand cushioning to underground cable as per clause No 19.75 of SSR Part-I laid with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable. The top layer of 15cm shall be punned to 10 cm (total 23 cm) complete all as specified.
kaushal builders
M/s R S Construction
BHARDWAJ BUILDERS
MM Constructions
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .