Laying of 11 KV XLPE Underground Cables under all schemes for Sardar Subdivision of Anand City Division under Anand Circle

WORK SCHEDULE - B ( ARC ) - TENDER ID -

Name of work : Laying of 11 KV XLPE Underground Cables under all schemes for Sardar Subdivision of Anand City Division

under Anand Circle

Item Code Details of Works Unit Qty

Excavation of trench 0.5Mtr. Wide and 1 Mtr. Deep for laying of HT/LT underground

cable of size upto 300Sq.mm PILC or XLPE.(The cable should be laid on bed of sand

1 9913000036 and to cover cable with half round RCC pipe 6" internal dia and length of one meter Mtr 148 400

along with each bottom and top.) The entire trench there after should be refilled with

earth dully rammed up to ground level As perDrg.No MGVCL/Tech/UG Cable/01/12-13

Excavation of trench 0.75Mtr. Wide and 1 Mtr. Deep for laying of double HT/LT

underground cable of size upto 300Sq.mm PILC or XLPE.(The cable should be laid on

bed of sand and to cover cable with half round RCC pipe 6" internal dia and length of

one meter along with each bottom and top.)The entire trench there after should be

refilled with earth dully rammed up to ground level As perDrg.No MGVCL/Tech/UG

Laying/Relaying of cable in Cable trench & from ground level to pole structure for

providing outdoor cable joints.

Laying / Relaying XLPE/PILC cable by digging of pits, removal of old cable and laying

of new cable on sand bad as per item No.1 above.

Widening and refilling with earth duly rammed the trench for laying additional number

Add : Charges for digging of tar road for laying of cables over and above digging of

pit in normal soil as per Sr.No.

Laying of U/G 11KV XLPE cable by Push & Pull method (MANUAL / BY Horizontal

Directional MACHINE)thru with HDPE pipe 110mm Diameter,5.3 to 6 mm thickness or 4"

diameter GI Pipe without damaging surface of the road by horizontal boring / drilling

method (Excluding cost of HDPE pipe 4"GI Pipe) as per Drawing and specification

8 o302000078 Supply of half round RCC hume pipe 6" internal dia & length of 1 Mtr. No 100 500

9 o302000079 Supply of medium grade GI pipe of size 4" dia(Including clamping the cable with pole) RMTR 459 300

Supply of HDPE pipe for laying 11KV XLPE cable 110mm nominal diameter & 5.3 to

mm thickness as per IS:4984

Supply of sand 0.300x0.500X1.00mtr (Layer at bottom of cable trench approximately

0.15cmt) As perDrg.No MGVCL/Tech/UG Cable/01/12-13

Supply of sand 0.300x0.750X1.00mtr(Layer at bottom of cable trench approximately

0.225cmt) As perDrg.No MGVCL/Tech/UG Cable/02/12-13

Providing & supplying, fixing route marker of C.C.1:2:4, 150mm x 150mmx750mm

concrete stone (MGVCL marked with approved yellow colour) embedded in Earth at

13 9913000009 least 300mm below the G.L. & 450mm above G.L. at distance approx. 100 Mtr. or as No 143 100

directed by engineer incharge.(This Includes material & Labour charges for excavation

Preparing of Digital map of underground network by capturing Geographical co-

14 4001000183 ordinates with GPS Instrument (having accuracy within 1.0 Mtr) and superimposing the No 1462 10

digital map on high resolution Google map.

Moulding of cable joint (St.joint,indoor and outdoor) for XLPE cable- labour charges,for

Supply & fixing labour charge for providing Bricks (size 9"X 4"X3")layer (4" side layer

Nos of Bricks per meter length of cable Top side + 9" side layer 4.5 nos X 2 side=10+9=19

16 9501060079 Nos /Running Meter) for 11KV XLPE Cable Mechanical protection (only top sied layer) No 5 3000

at cable ring (loop) location, as per instruction of Engineer in Charge @ Rs. 4/- per Bricks

current market rate F.O.R Site delivery

Supply & laying in cable trench at 300 mm to 450 mm deep from ground level Warning

Tape of 8" Eight inch width of 300 micron LDPE materials for protection of U/G Cable

17 9911000023 laid undergound during any excavation work as per instruction of Eingineer in Charge RMTR 11 500

(Rs. 9 per Mtr Material Cost + Rs 2.50 per Mtr F.O.R. Site carting & laying labour charge

above cable in excavated trench = Rs. 11.50 per Meter )

18 o4110000057 Supply of outdoor cable jointing kit for 185sqmm XLPE cable No 1073 50

19 o4110000058 Supply of outdoor cable jointing kit for 240sqmm XLPE cable No 1076 100

20 o4110000015 Supply of indoor cable jointing kit for 185sqmm XLPE cable No 1445 30

21 o4110000056 Supply of indoor cable jointing kit for 240sqmm XLPE cable No 877 30

22 o4110000074 Supply of straight joint cable jointing kit for 185sqmm XLPE cable No 2750 30

23 o4110000060 Supply of straight joint cable jointing kit for 2405sqmm XLPE cable No 2820 30

Numbering the pole (For UG Cable marking) with paint by preparing back ground of

feet to 1.5 feet height surface of one colour and have lettering (2" to 3" HT) as directed

by in charge engineer (The two colour should have been selected as to have contrast

for proper readability(Required colour to be provided by Contractor)

25 9911000189 Digging of Pits or Cutting of trees 477 10

Total Amount (Rs)

Total Amount (Rs)

Note: A) The bidder shall quote FIRM PRICES only. The prices quoted will not be subject to any escalation till completion of work

B) The above prices are inclusive of all taxes, levis duties etc, except Goods & service tax (GST).

C) GST wil be paid exta as applicable from time to time on given taxable goods and/or sevices

D) All dismentalled material should be credited to Anand store.

E) IN SCHDULE ''B'' MENSIONED QUANTIES MAY VARY IN EVERY WORKS. BUT ORDER VALUE WILL NOT BE CHANGED & PAYMENT

WILL DONE AS PER ACTUAL EXCUSION OF WORKS.

Executive Engineer

Anand CIty Division