Construction of road from Dunguri to Jarimuli via Launsara road

Clearing grass and removal of rubbish up to a distance of 50 mtr outside the periphery of the area and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness as per specification and as per the direction of Engineer in charge.

Dismantaling of of Brick stone masonary in cement mortar above 3 mtr height for existing structures including TandP and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviciable materials and stacking the serviciable materials with all lifts and lead of 1000 m as per specification and as per the direction of Engineer in charge.

Removing all type of Hume Pipes and Stacking within a lead of 1000 metres including Earthwork and Dismantling of Masonry Works including TandP, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres Upto 600mm dia

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in table 300 2 for embankment construction construction and Clause 305 of MoSRTandH Specifications for Road and Bridge works

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site by manual means within a lead of 5kms, spreading, grading to required slope and compacting to meet requirement of table 300 2 and clause 305 of MoSRTandH Specifications for Road and Bridge works 4th Revision and as per the direction of engineer in charge.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement as per MORD technical Specification Clause 301 and direction of the Engineer in Charge excluding cost of excavation and transportation to site .

Construction of granular sub base by providing close graded granular sub base Grading III material as per table 401 1, spreading in uniform layer with moter grader on prepared surface, mixing by mix in place method with rotavator at OMC ,and compacting with vibratory roller to achieve the desired density complete as per clause 401 of MoSRTandH Specification for Road and Bridge works 4 th Revision

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including pre mixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRTandH Specifications for Road and Bridge works 4th Revision .

Construction of Un reinforced,plain cement concrete pavement M 30 grade over a prepared sub base with 43 grade using brande cement at the rate 350 kg per cum,coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, spread, compacted finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures as approved, finishing to lines and grages as per drawing and as per Clause 602 of MoSRTandH specifications for Road and Bridge Works and as per as per specification and direction of the Engineer in Charge.

Providing and applying primer coat with bitumen emulsion SS on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60 kg sqm using mechanical means as per Technical Specification Clause 502 of MOSRTandH including cost, conveyance, royalty, taxes of chips and bitumen and other required materials etc. complete and as per direction of Engineer In Charge.