GE/J/A 2021-22 (9010/E8)

Amount

Cutting and grubbing of bushes / shrubs /babool branches etc surrounding manholes,Gully trap ,wall pipe and sewage line alignment etc and levelling of ground around the manholes,sewage line and finish the surface of wall and removing the waste material to a distance exc 50m and n exc 500m and clearing the site. Note :- (i) All T&P (like JCB etc ) and equipment’s required for clearance of site, safety requipment shall be arranged and made available by the contractor. ii) All safety measures for workmen to do work shall be provided by the contractor. (iii) If any existing govt assets(Like electric cables,water pipeline, storm water drain boundary walls etc) are damages during the site clerance /excavation contractor should repair the same with time without any delay at his own cost, complete all as directed.

Cleaning/removal of sewage block in the existing line in any depth from WC to first manholes or gully trap to manholes including cleaning of WC and testing of pipe by pouring water 100mm SGSW/RCC/CI pipe for ground floor qtr, complete all as directed.

Cleaning/removal of blockage in the existing line in any depth and bathroom to first manholes or kitchen to gully traps or gully trap to manholes including cleaning of bathroom and WHB trap and kitchen floor trap and testing of pipe by pouring water manhole 75mm SGSW/RCC/CI pipe for ground floor qtr, complete all as directed

Cleaning of manholes complete of any size and at any location incl taking out sludge and other material deposited in manhole and its disposal to a distance n exc. 50 M all as directed by Engr-in-Charge for depth of manholes as given below, complete all as directed:- (a) Depth of manhole n exc 1.00 M

(b) Depth of manhole exc 1.00 M & n exc 2.00 M

( c) Depth of manhole exc 2.00 M

Cleaning/Removal of sewage block in the existing line incl cleaning of complete line laid at any depth and at any location between two consecutive manholes/gully trap for the following, complete all as directed:- (a) Two consecutive manhole or gully trap to manhole incl testing the pipe by pouring water from manhole all as directed to the entire satisfaction of Engr-in-Charge for 150mm bore SGSW/RCC pipe .

(b) All as per above item No. 07 but 200mm bore SGSW/RCC Pipe.

(c) All as per above item No. 07 but 250mm bore SGSW/RCC Pipe.

(d) All as per above item No. 07 but 300mm bore SGSW/RCC Pipe.

(e) All as per above item No. 07 but above 300mm bore SGSW/RCC Pipe. Note:- Notes are applicable for item no. (a) No manual scavrage should be carried out for sewer line cleaning & blockage removal. (b) No bamboo should be used for removal of sewage blockage, it should be done throw extendable iron rode. (c) While cleaning of blocked sewage lines, the cutting & jetting machine required should be provided by contractor at his own arrangement for removal of blockage of sewer line cleaning, no extra amount shall be admissiible on this account. (d) During sewage cleaning work all sefety precautions like safety belt, safty cap,hand globes, oxygen cylender & masks etc should be provided by contractor to labour.

Temporarily blocking of inlet of septic tanks with suitable wooden pugs/gunny bags and pumping out/bailing out effluent (liquid/semi liquid) from the septic tanks with diesel engine driven gen set into closed containers or through PVC Hose pipes & delivering the same outside def land complete and taking out the blocking arrangements of inlet and making the system functional, complete all as directed.

Cleaning of septic tanks of any capacity & any size by taking out sludge (working condition is in foul condition) & removing the sludge to outside defence land in closed vehicle all as directed by Engr-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in soft loose soil, complete all as specified and as directed.

All as per above item No. 14 but exc 1.5 m depth as in soft loose soil

Returning, filling in,including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft loose soil, complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as directed.

M&L for Cement concrete 1:4:8 type D2 using 40 mm graded stone agg as in in foundations, filling and mass concrete, complete all as specified and as directed.

M&L PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate as in surface channels and drains, , complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc, complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregates as in copings, kneelers, apex stones, bed plates, kerbs lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, not provided including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

Demolition of stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as directed.

M&L for Squared rubble walling Jodhpur type, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6, complete all as specified and as directed.

Except stone Squared rubble walling, Jodhpur type brought upto courses, well bonded,bedded and solidly hearted, built in CM 1:6, complete all as specified and as directed.

Extra over to squared rubble walling, Jodhpur type regular coursed masonry for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified , brought upto courses, complete all as specified and as directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar 75/100 mm bore, complete all as directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar 150 mm bore, complete all as directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required 75/100 mm bore, complete all as directed.

S&F spun type , Cast iron soil waste and vent pipes 75 mm bore in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and as directed.

S&F spun type, Cast iron soil waste and vent pipes 100 mm bore in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and as directed.

S&F spun type , Cast iron soil waste and vent pipes 75 mm bore in any length with or without ears, with cement joints, lfixed on walls, complete all as specified and as directed.

S&F spun type, Cast iron soil waste and vent pipes 100 mm bore in any length with or without ears, with cement joints, fixed on walls, complete all as specified and as directed.

S&F 75 mm bore cast iron Bends (any radius), complete all as specified and as directed.

S&F 100 mm bore cast iron Bends (any radius), complete all as specified and as directed.

S&F 75 mm bore cast iron Bends with oval acess door (any radius), complete all as specified and as directed.

S&F 100 mm bore cast iron Bends with oval acess door (any radius), complete all as specified and as directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls, complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls, complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends any radius, complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bends any radius, complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends any radius with oval acess door, complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bends any radius with oval acess door, complete all as specified and as directed.

S&F 100mm cast iron sanitary connections connected to mouth of WC or P/S trap short connections pipe of length upto 300 mm, complete all as specified and as directed.

S&F 110mm PVC (SWR) WC connector with lip ring, complete all as specified and as directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement for 75 mm bore of pipes, complete all as specified and as directed.

M&L for Salt-glazed stoneware gully traps, square or round mouthed, type 'P' size 100 x 100 mm, complete all as specified and as directed.

M&L for 150 mm bore Salt-glazed stoneware drain pipes laid in trenches and jointed as specified, complete all as specified and as directed.

M&L for 150 mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and as directed.

M&L for 200 mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and as directed.

Material and labour for cutting into existing manholes for connecting new drains, for removing existing branch drain, making good to walling and rendering, cutting out branch channel, complete all as specified and as directed. (a) 150mm bore pipes

(b) 200mm bore pipes

M&L for Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore pipe, complete all as specified and as directed.

M&L for Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm bore pipe, complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in manhole covers etc, complete all as directed.

S&F 75mm thick Jodhpur type stone slab not exc 2m in length machine cut all face & along exposed edged size faced both sided as in manhole cover, complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as directed.

M&L for 15 mm thick Rendering in CM 1:4 using intergral water proofing liquid on stone masonry or other than fair faces of brick wk & finishing the surfaces even & fair w/o using extra cement, complete all as specified and as directed.

M&L for 15 mm thick Rendering in CM 1:6 on stone masonry or other than fair faces of brick wk & finishing the surfaces even & smooth w/o using extra cement, complete all as specified and as directed.

Supply only integral water proofing compound (ISI marked), complete all as specified and as directed.

Demolition of RCC cover slabs of drains, manholes etc, complete all as directed.

M&L for precast RCC cover slabs, coping slabs etc in 1:2:4 mix using 20 mm graded stone agg set in CM 1:6, complete all as specified and as directed.

M&L for 10 mm dia & over TMT bars cut to length bent to shape required & binding with MS binding wire not less than 00.90mm dia, complete all as specified and as directed.

M&L for 5 mm dia & over as in stirrups TMT bars cut to length bent to shape required & binding with MS binding wire not less than 00.90mm dia, complete all as specified and as directed.

M&L for Framed work such as frames around manhole covers , rungs etc grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and as directed.

Temporarily blocking of inlet/outlet of manholes of sewage line with suitable wooden plugs/gunny bags during repairing of sewage line so that sewage water not enter in working area and stored sewage water/effluent (liquid/semi liquid) should be pumping out/bailing out from the manholes or water inflow caused by spring or tidal or river seepage or broken water mains or drains and the like pumping ou with diesel engine driven gen sets/pumping set/mud pump into closed containers & delivering the same outside def land complete or bypass/diverte through PVC hose pipes to main centeral sewage line for making workable condition of the site and taking out the blocking arrangements of inlet/outlet after repair/change of sewage line and making the system functional, complete all as specified and as directed.

S&F as in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests Water closet (Squatt pattern), complete all as specified and as directed.

S&F as in repairs Vitreous China wash down water closet pan (pedestal pattern), white complete incl fixing / connecting to flushing cistern, complete all as specified and as directed.

Supply only PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and as directed.

M&L for 15 mm thick Screed bed or bedding layer of CM1:4 for laying floor finishes, complete all as specified and as directed.

M&L for coloures Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.

Demolition of plain cement conc as in flooring etc, complete all as directed.

M&L for 75mm thick cement concrete 1:4:8, type B-1 (using 20mm graded crushed stone aggregate) as in sub base complete all as specified and as directed.

M&L for precast cement concrete laquer coated tiles 30cmx30cmx25-30mm thick machine pressed set jointd and pointed in neat cement slurry in floor all as specified and directed by Engr-in-charge.

Demolition of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as directed.

M&L for coloured Glazed ceramic tiles ist quality in vertical surface 300x450 mmx7 mm thick thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and as directed.

Note for all above items:-All items in BOQ are for"Materials and labour /Supply and fix" and to be executed in "Repairs i.e incl takng down old items" unless otherwise specifically mentioned as "Supply only" or "fixing only" in BOQ. Contractors are required to quote their rates accordingly.

Panwar Electricals

MAA AISHA TRADERS SIWANCHI GATE