WBPWD/SE/WC-I/ENIB-01/25-26/1

Supply and placement of as per approve as per order Almirah plain shall have an overall size of 916mm(W)x486mm(D)x1980mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). The Product should have GRIHA Certificate, Greenguard Certificate (from UL), Indoor Advantage GOLD Certificate.The manufacturer should be a member of BIFMA & IGBC Platinum (Indian Green Building Council) & should have AIOTA, SVAGRIHA, Green Pro, IAQ and Green Guard (from UL) Certification. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed). The bidder or their OEM should not be blacklisted from any Govt. establishment in the past from the date of submitting the bid. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply and placement of as per approve as per order Almirah with full locker Product Size: - 916 mm (W) x 486 mm (D) x 1981 mm (H) DMX Drg.- ST-095, Rev.0 3. Construction & Material Welded construction.0.8 mm thk CRCA for Back, Shelf & 0.9 mm thk CRCA for all other components. 4. Configuration (Door) Full height Steel Hinged Door5. Locking & handle : •Mazak Handle3 way locking mechanism with shooting bolt arrangement.6. Shelving : •Height wise Adjustable Shelf Mounting •Uniformly Distributed Load Capacity per each full shelf is 80 Kg maximum •Plain 4S : 3 Nos. of Adjustable Full Shelves. Locker: A single full locker with a secret chember and its own locking system 7. Leveler M10 Screw type leveler with hex plastic base 8. Finish Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10). The manufacturer should be a member of BIFMA & IGBC Platinum (Indian Green Building Council) & should have AIOTA,SVAGRIHA , Green Pro, IAQ and Green Guard (from UL) Certification . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed). The bidder or their OEM should not be blacklisted from any Govt. establishment in the past from the date of submitting the bid. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply and placement of as per design approve as per order with following specifications Over all Size; 72"X36"X15" with 6 Pannel Should conform to IS : 513 D, and minimum yield strength 210 MPa. 6 NOS BEND, PRESS FORMING MANUFACTURING, Panels are to be provided with lipped flanges. Width of the flange being 31 mm and depth of lip 17 mm. Panels are provided with 9 mm holes on the flange for corner plates, cladding sheets. Design Criteria: Deflection to be under SEMA guidelines. Surface Finish: Epoxy-Polyester Powder Coated – Lead Free Oxford Blue/BS Grey Colour Angles to be of rolled formed construction to ensure minimal residual stresses and accuracy throughout the length of the angles, and are designed to take the designated load. The process of punching and forming is in one flow and a highly synchronized operation, to ensure dimensional accuracy, consistency and uniformity. Steel Type: IS: 5986 – ISH410S / Equivalent (or) IS:2062 - E 250/ Equivalent IS:513 D. Minimum guaranteed yield strength: 255 MPa/ 210 MPa. Equivalent international Standard: JIS 3101: SS 400 EN 10025 : S 235 JR DIN 17100 : St 42 JIS ; G3141 , the testing of paint for various physical and chemical properties is done as per IS 101: 1964. Unless otherwise specified, Uprights and bracings are offered. The manufacturer should be a member of BIFMA & IGBC Platinum (Indian Green Building Council) & should have AIOTA, SVAGRIHA Green Pro, IAQ and Green Guard (from UL) Certification. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed). The bidder or their OEM should not be blacklisted from any Govt. establishment in the past from the date of submitting the bid. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply and placement of as per design approve as per order with following specifications Over all Size; 48"X36"X15" with 4 Pannel Should conform to IS : 513 D, and minimum yield strength 210 MPa. 6 NOS BEND, PRESS FORMING MANUFACTURING, Panels are to be provided with lipped flanges. Width of the flange being 31 mm and depth of lip 17 mm. Panels are provided with 9 mm holes on the flange for corner plates, cladding sheets. Design Criteria: Deflection to be under SEMA guidelines. Surface Finish: Epoxy-Polyester Powder Coated – Lead Free Oxford Blue/BS Grey Colour Angles to be of rolled formed construction to ensure minimal residual stresses and accuracy throughout the length of the angles, and are designed to take the designated load. The process of punching and forming is in one flow and a highly synchronized operation, to ensure dimensional accuracy, consistency and uniformity.Steel Type: IS: 5986 – ISH410S / Equivalent (or) IS:2062 - E 250/ Equivalent IS:513 D. Minimum guaranteed yield strength: 255 MPa/ 210 MPa. Equivalent international Standard: JIS 3101: SS 400 EN 10025 : S 235 JR DIN 17100 : St 42 JIS ; G3141, the testing of paint for various physical and chemical properties is done as per IS 101: 1964. Unless otherwise specified, Uprights and bracings are offered in Oxford blue colour. The manufacturer should be a member of BIFMA & IGBC Platinum (Indian Green Building Council) & should have AIOTA, SVAGRIHA , Green Pro, IAQ and Green Guard (from UL) Certification and also should have zero waste to landfill certification by Greenco & approved by CII of the OEM. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed). The bidder or their OEM should not be blacklisted from any Govt. establishment in the past from the date of submitting the bid. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply and placement of as per design approve as per order with following specifications Product Size: 914 mm (W) x 320 mm (D) x Height for 4 Door 1742mm (Only Metal top option) Construction & Material Rigid Knock down construction. Prime Quality CRCA Steel - Panels & Frame from 0.8 mm thick Door Features / Locking Each Door has 6 Lever Cam lock with common key · Each Door has 3 mm Thk transparent glass for clear inside vision secured in a Metal Frame through rubber gasket Each door has a Scissor mechanism for receding inside the top of respective compartment & ensures parallel & smooth movement. · Each door has Plastic side end caps as Handle which is easy to grip Shelves Each compartment has a storage shelf Uniformly Distributed Load Capacity per each shelf is 80 Kg maximum.Top Panel 4 Door has Metal Top Panel Finish Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10). The Product should have Green Pro Certificate, GRIHA Certificate, Greenguard Certificate (from UL), Indoor Advantage GOLD Certificate. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, SVAGRIHA , Green Pro, IAQ and Green Guard (from UL) Certification . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed). The bidder or their OEM should not be blacklisted from any Govt. establishment in the past from the date of submitting the bid. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply and placement of as per design approve as per order with following specifications Chair SEAT ASSEMBLY: The seat assembly is made up of 1.2 ±0.1cm. Thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18, upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE (FOR 7501RG, 7502RG, 7512RG): 47.0 cm. (W) x 48.0 cm. (D) BACK ASSEMBLY: The back assembly is made of powder coated (DFT 40-60 microns) tubular frame of Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back is upholstered using Net fabric with high tenacity yarn. The chair is available in three models. 7502RG, 7512RG-FULL BACK SIZE : 46.5 cm. (W) x 60.5cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density =45+/-2 kg/m³ and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The one-piece armrests are injection moulded from black Co-polymer Polypropylene. CENTRE-TILT MECHANISM (FOR 7501RG, 7502RG): The mechanism is designed with the following features: 360° revolving type. 17° 12° maximum tilt on pivot at centre; Upright position locking, Tilt tension adjustment. TUBULAR FRAME (FOR 7512RG): The powder coated (DFT 40-60 microns) tubular frame is cantilever type & made of Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. ER.W. Tube. PNEUMATIC HEIGHT ADJUSTMENT (FOR 7501RG, 7502RG): The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSY (FOR 7501RG, 7502RG): The bellow is 3 piece telescopic type and injection moulded in Black Polypropylene. PEDESTAL ASSEMBLY (FOR 7501RG, 7502RG): The pedestal is injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal is 66.3 ±0.5cm. Pitch-centre dia. (76.3 ±1.0cm with castors.) TWIN WHEEL CASTORS (FOR 7501RG, 7502RG): The twin wheel castors are injection moulded in Black Nylon. The Product should have Green Pro Certificate, GRIHA Certificate, Indoor Advantage GOLD Certificate.The manufacturer should be a member of BIFMA & IGBC Platinum (Indian Green Building Council) & should have AIOTA, SVAGRIHA , Green Pro, IAQ and Green Guard (from UL) Certification . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed). The bidder or their OEM should not be blacklisted from any Govt. establishment in the past from the date of submitting the bid. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply and placement of as per design approve as per order with following specifications Chair seat/back assembly : the cushioned seat should be made of injection molded plastic outer & inner. plastic inner should be upholstered with pure leather and moulded high resilience (hr) polyurethane foam of density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25% compression.the cushioned back should be made of pu foam with insitu molded ms e.r.w round tube of size 1.9±0.03cm x 0.16 ±0.0128cm. it upholstered with pure leather. seat size : 47.6 cm. (w) x 49.2 cm. (d)back size : 47.5 cm. (w) x 77 cm. (d) armrests: the armrest top should be moulded from polyurethane(pu), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk m.s e.r.w tube having chrome plated finish.the armrest height adjustable up to 6.5±0.5cm in 5 stepsactive bio-synchro mechanism: the adjustable tilting mechanism should be designed with the following features:• 360° revolving type.• front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort.• tilt tension adjustment can be operated in seating position.• 5-position tilt limiter giving option of variable tilt angle to the chair.• seat/back tilting ratio of 1: 2• the mechanism housing should be made up of hpdc aluminium black powder coated.4 seat depth adjustment: seat depth adjustment should be integrated in the seat through a sliding mechanism. seat depth adjustment range should be of 6.0±0.5 cm. adjustable back support: back frame should be connected to the up/dn mechanism housed in plastic t spine. it can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need.pneumatic ht. adjustment: the pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm.pedestal assembly the pedestal should be high pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors. the pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. with castors.)twin wheel castors:the twin wheel castors should be injection moulded in black polypropylene. Overall Dimensions of ChairSeat Height -44.5 to 54.5 cm. Height -114-131.5 cm. Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-66.5 cm. The Product should have Indian Design Mark Certificate, Green Pro Certificate, GRIHA Certificate, BIFMA Compliance, Greenguard Certificate (from UL), Indoor Advantage GOLD Certificate.The manufacturer should be a member of BIFMA & IGBC Platinum (Indian Green Building Council) & should have AIOTA, SVAGRIHA , Green Pro, IAQ and Green Guard (from UL) Certification . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed). The bidder or their OEM should not be blacklisted from any Govt. establishment in the past from the date of submitting the bid. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply and placement of as per design approve as per order with following specifications SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric. Back Size : 45.5 cm. (/1/) x 53.0 cm. (H) Seat Size : 48.5 cm. (W) x 49.0 cm. (D) . HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density Min 48 kg/m3, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression. TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The "S" shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which should be inbuilt in seat base and the tension (return force) should be user weight dependent. 4. FIXED ARMRESTS: The assembly should be having Fixed arm rest structure moulded in glass-filled Poly-amide. The Armrest Top should be made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide. , PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cm . PEDESTAL ASSEMBLY: The pedestal should be injection moulded in glass-filled Poly-amide and fitted with 5 nos. twin wheel castors. The pedestal should be 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors . TWIN WHEEL CASTORS :5 nos. twin wheel castos are injection moulded in Poly-amide having 5.0 ± 0.1 cm wheel diamter assembled to the pedestal. The Product should have Indian Design Mark Certificate, Green Pro Certificate, BIFMA Level-2 Compliance, Greenguard Certificate (from UL), Indoor Advantage GOLD Certificate, AIOTA certificate, Design Excellence Award certificate. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, SVAGRIHA, Green Pro, IAQ and Green Guard (from UL) Certification. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed). The bidder or their OEM should not be blacklisted from any Govt. establishment in the past from the date of submitting the bid. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply and placement of as per design approve as per order with following specifications Chair SEAT ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. *Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) BACK ASSEMBLY: The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. HIGH BACK SIZE: 47.7 cm. (W) x 76.4 cm ARMRESTS : The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism should be designed with the following features: • 360' revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT : Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. PEDESTAL ASSEMBLY: The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black PP having 6.0± 0.1cm wheel Diameter. The Product should have Indian Design Mark Certificate, Green Pro Certificate, GRIHA Certificate, BIFMA Level-2 Compliance, Greenguard Certificate (from UL), Indoor Advantage GOLD Certificate. The manufacturer should be a member of BIFMA & IGBC Platinum (Indian Green Building Council) & should have AIOTA, SVAGRIHA , Green Pro, IAQ and Green Guard (from UL) Certification . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed). The bidder or their OEM should not be blacklisted from any Govt. establishment in the past from the date of submitting the bid. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply and placement of as per design approve as per order with following specifications 1)SEAT/BACK FRAME ASSEMBLY: The seat and back should be made of 0.1 ±0.012 cm thick CR steel perforated sheets which should be welded to a seat/back frame assembly made of 0 1.9 ±0.02cm x 0.16 ±0.0128 cm thk MS ERW tube. Connecting Strips made of 0.5cm thick HR steel should be welded to the structure. The mounting base subassembly made up of 0 1.9 ±0.02cm x 0.16 ±0.0128 cm thk & C-channel made of, 0.315±0.022cm HR steel welded to connecting strip for assembly with the connecting beam. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, SVAGRIHA , Green Pro, IAQ and Green Guard (from UL) Certification . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed). The bidder or their OEM should not be blacklisted from any Govt. establishment in the past from the date of submitting the bid. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply and placement of as per design approve as per order with following specifications 61" Vault 1541 x 775 x 720 Strong and Seamless Body With fully welded multi-corner bend construction without a single rivet and one-piece wrap around door construction Strong Shooting Bolts To secure the door behind the jamb box against dislodging Two-Step Door and Frame Construction For higher resistance against fire and burglary Dual Control High Precision 8-lever locks protected with unique drill-defeat shield in the door Lift-off hinges door construction Facilitates removal of the door for ease of transportation and service Torch and Drill Resistant Matrix Enhanced Torch and Drill Resistant Matrix used in TRTL classes of safes (Class ll and above) Double Duty Barrier (DDB) Armoured with Double Duty Barrier (DDB) material in the door and the body Additional Beta Relocker Sets the safe into a deadlock with two relockers and an additional beta relocker to protect from precision attack on the lock BIS Standard Tested Tested as per BIS standard IS 550:2022.

Supply and placement of as per design approve as per order with following specifications Boltless shelving is a manual picking shelving system suitable for storing lighter to medium loads. Storage system for manual picking of products following the “man-to-goods” principle, i.e. goods which can be easily handled by man, are stored in these systems. Boltless shelving has the prominent characteristics of rapid assembly, flexibility to adjust levels without any additional tools. The combination of aesthetics & material combinations makes this system highly suitable for office as well as industrial storage. Wide range of accessories gives versatility to cater different industrial storage segments. Design: Godrej or Equivalent make using following standards, as applicable for design of its boltless shelving system. BS: 5950 (V): 1998 – Building design using cold formed steel sections. FEM 10.2.06 – Code of practice for design of hand loaded static steel shelving system. SEMA - Code of practice for the design of High and Low Rise Static steel shelving Raw Material : Load bearing members & accessories are made up of relevant high strength steel & the different types of materials used are:

In addition to high strength, the raw material used for structural load bearing members possesses adequate ductility to ensure toughness. The material also has the necessary impact strength for cold room applications up to -30 deg C. Galvanized components: Galvanizing protects steel from corrosion by providing a thick, tough metallic zinc envelope, which completely covers the steel surface and seals it from the corrosive action of its environment. The galvanized coating provides outstanding abrasion resistance. Where there is damage or minor discontinuity in the sealing coat of zinc, protection of the steel is maintained by the cathodic action of the surrounding galvanized coating. And Minimum GSM will be 120. Powder-coated components: For long life and protection from corrosion, All Powder coated components are given a thorough anti-rust treatment. The dry film thickness (DFT) after powder coating would be average 35 microns. All powder coated components are subjected to an elaborate 4 step, six zone anti corrosion treatment, viz. De-greasing as per IS 6005:1970, rinsing, phospating as per IS 3618:1966 and RO water rinsing. Furthermore, the testing of paint for various physical and chemical properties is done as per ASTM Standard. Upright G50: Upright type : Upright G50, Profile width : 50 mm, Profile depth : 37 mm, No of pieces : Single, Panel adjustability : 25 mm, Material quality : Min Ys=210 MPa, Mfg. Process : Roll forming, Finish : Powder Coated, Colour: Light Grey Bracing G50: Bracing type is battened type. Bracing is a formed single piece section which connects two vertical uprights & makes a frame. Section: Flat with edge hem bend and middle rib, Mfg. Process : Press brake forming, Connectivity : Hooking & Pin assembly, No of fasteners : 2 nos. of M6x10 plastic rivet pin, Surface finish : Galvanized. As per drawing no. C5009-P1001.01-01R01. The Product should have Indian Design Mark Certificate.